Brand-new notebook useless with Linux...
I just bought a new notebook. Here is the output from lspci using the latest pci.ids file from sourceforge:
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc: Unknown device 5a3f
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02)
00:14.6 Modem: ATI Technologies Inc: Unknown device 4378 (rev 02)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:05.0 VGA compatible controller: ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
05:02.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) 05:09.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
05:09.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
05:09.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
05:09.4 Class 0805: Texas Instruments PCI6411, PCI6421, PCI6611, PCI6621, PCI7411, PCI7421, PCI7611, PCI7621 Secure Digital (SD) Controller
None of these work and I can find no support anywhere for them:
SMBus
Audio ("unknown codec")
Modem ("no codec available")
Wireless
FlashMedia
SD/MMC
Additionally, the system clock runs at 2x normal speed with PowerNow enabled.
Am I stuck with running XP on this thing?
__
Chuck
Quoted 1 line · Chuck Ebbert
SMBus
Is there anything on there that you actually want to talk to?
Quoted 1 line
Audio ("unknown codec")
snd-ati-atiixp ought to drive it - if it doesn't, that's probably a bug.
Quoted 1 line
Modem ("no codec available")
It's a winmodem. What were you expecting?
Quoted 1 line
Wireless
Broadcom won't release any specs.
Quoted 1 line
FlashMedia
TI won't release any specs. If you're especially nice to them, they may give you a binary driver built against your kernel.
Quoted 1 line
SD/MMC
Ditto.
Quoted 1 line
Additionally, the system clock runs at 2x normal speed with PowerNow enabled.
http://bugzilla.kernel.org/show_bug.cgi?id=3927
Quoted 1 line
Am I stuck with running XP on this thing?
If you buy a machine with hardware produced by manufacturers that are hostile to Linux, and you want to use that hardware, then yes. Don't do that.
Signature · 1 line
Matthew Garrett | [email protected]
Hi,
Quoted 5 lines · Matthew Garrett
Quoted 1 line · Chuck Ebbert
SMBus
Is there anything on there that you actually want to talk to?
Smart batteries are accesed thru the SMBus. If you want to know battery information, like the charge, you need to talk to the SMBus.
There are some patches out there, not integrated yet into ACPI i think...
regards,
Signature · 1 line
David Gómez Jabber ID: [email protected]
Quoted 2 lines · David Gómez
Smart batteries are accesed thru the SMBus. If you want to know battery information, like the charge, you need to talk to the SMBus.
Smart batteries are i2c devices, but you talk to them via the embedded controller rather than via the system SMBus.
Signature · 1 line
Matthew Garrett | [email protected]
Quoted 9 lines · Matthew Garrett
Quoted 1 line · Chuck Ebbert
Audio ("unknown codec")
snd-ati-atiixp ought to drive it - if it doesn't, that's probably a bug.
Quoted 1 line
Modem ("no codec available")
It's a winmodem. What were you expecting?
snd-atiixp-modem should drive this too.
Sasha.
Quoted 5 lines · Matthew Garrett
Quoted 2 lines
SD/MMC
Ditto.
There are Secure Digital drivers in -mm. I'm sure Pierre would like a tester..
Quoted 3 lines
Quoted 1 line
Additionally, the system clock runs at 2x normal speed with PowerNow enabled.
Holy cow. There's nearly as much action there as #4851.
Quoted 9 lines · Andrew Morton
Quoted 5 lines · Matthew Garrett
Quoted 2 lines
SD/MMC
Ditto.
There are Secure Digital drivers in -mm. I'm sure Pierre would like a tester..
Not for the TI part, as far as I know. The only specs available are for the PCI register space and the firmware loader interface - there's nothing on how to actually drive the device.
Signature · 1 line
Matthew Garrett | [email protected]
Quoted 1 line · Chuck Ebbert
I just bought a new notebook.
I'd return it if I were you.
Lee
Quoted 2 lines · Chuck Ebbert
I just bought a new notebook. Here is the output from lspci using the latest pci.ids file from sourceforge:
You seem to be surprized by the contents. When I recently changed my work notebook (dead screen on the previous one), it took me nearly 6 months to find one which suits my needs (serial, floppy, ...) and to ensure that everything in it was supported. I've refused several ones because there was no clear indication that they hosted supported hardware. So I'm a bit amazed by your reaction, you seem to have bought the first cheap K8 you saw in a store.
If I were you, I'd return it.
Regards,
Willy
Quoted 43 lines
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc: Unknown device 5a3f
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02)
00:14.6 Modem: ATI Technologies Inc: Unknown device 4378 (rev 02)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:05.0 VGA compatible controller: ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
05:02.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) 05:09.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
05:09.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
05:09.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
05:09.4 Class 0805: Texas Instruments PCI6411, PCI6421, PCI6611, PCI6621, PCI7411, PCI7421, PCI7611, PCI7621 Secure Digital (SD) ControllerNone of these work and I can find no support anywhere for them:
SMBus
Audio ("unknown codec")
Modem ("no codec available")
Wireless
FlashMedia
SD/MMCAdditionally, the system clock runs at 2x normal speed with PowerNow enabled.
Am I stuck with running XP on this thing?
__
Chuck
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 11 lines · Willy Tarreau
Quoted 2 lines · Chuck Ebbert
I just bought a new notebook. Here is the output from lspci using the latest pci.ids file from sourceforge:
You seem to be surprized by the contents. When I recently changed my work notebook (dead screen on the previous one), it took me nearly 6 months to find one which suits my needs (serial, floppy, ...) and to ensure that everything in it was supported. I've refused several ones because there was no clear indication that they hosted supported hardware. So I'm a bit amazed by your reaction, you seem to have bought the first cheap K8 you saw in a store.
Incidentally, Is that a Compaq R4000?
for my V2311US with Broadcom 4318 these drivers worked with ndiswrapper:
ftp://ftp.support.acer-euro.com/notebook/ferrari_4000/driver/winxp64bit/80211g.zip while these did not:
http://www.broadcom.com/products/Wireless-LAN/802.11-Wireless-LAN-Solutions/BCM94318
PCIID: 14e4:4318
the ati-drivers 8.16.20 worked very well with the xpress 200 (ATI IXP) in it at 1280x768 (proprietary drivers seem to be a problem with software-suspend, which might be why i have not successfully resumed yet, vbetools to help here does not compile for me..yet?)
the twice as fast clock problem you will find several times on kernel.org's bugzilla for now add "noapic" to the kernel parameters, this works here at least till it is fixed (i havent tried booting 2.6.13 w/o it to be honest)
i get the charge of my battery, no info on current use through /proc/acpi/battery
have not really tried using mmc slot
i hope this helps you anything
Daniel
Quoted 3 lines · Chuck Ebbert
I just bought a new notebook. Here is the output from lspci using the latest pci.ids file from sourceforge:
...
Quoted 14 lines
controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) 05:09.0 CardBus bridge: Texas Instruments 05:09.4 Class 0805: Texas Instruments PCI6411, PCI6421, PCI6611, PCI6621, PCI7411, PCI7421, PCI7611, PCI7621 Secure Digital (SD) Controller
None of these work and I can find no support anywhere for them:
SMBus
Audio ("unknown codec")
Modem ("no codec available")
Wireless
FlashMedia
SD/MMC
Quoted 8 lines
Additionally, the system clock runs at 2x normal speed with PowerNow enabled.
Am I stuck with running XP on this thing?
__
Chuck
-
You already had an answer on the audio. Your answer on the wireless is ndiswrapper. You should really be looking at the Linux r3000 list, which handles much more than that now. The information for that list is:
LinuxR3000 mailing list
[email protected]
http://lists.pcxperience.com/cgi-bin/mailman/listinfo/linuxr3000
Wiki at http://prinsig.se/weekee/
If those folks don't know how to make you notebook run, you are in serious trouble. I have a Compaq R3120US, which I learned how to set up from the people over there. Notebooks are very different from most other computers, and you can expect to take some extra time and effort to get one set up.
An important note about your wireless is that even with ndiswrapper, not all Windows drivers are created equal, and you may need to try several for the same chip from different sources to find one that works.
Good luck with your SD/MMC reader, that tends to be something that doesn't work under Linux because the manufacturers haven't released the information needed to create proper drivers for them.
Mandriva tends to work great on notebooks, once you install the proper wireless driver, I have had good luck with Mepis as well, and I know many people running Fedora as well. Your other big challenge, maybe the biggest one, is going to be the display, at least if you have an uncommon display like the 1280 X 800 on my notebook.
Paul
Quoted 28 lines · Paul Misner
Quoted 3 lines · Chuck Ebbert
I just bought a new notebook. Here is the output from lspci using the latest pci.ids file from sourceforge:
...
Quoted 22 lines
controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) 05:09.0 CardBus bridge: Texas Instruments 05:09.4 Class 0805: Texas Instruments PCI6411, PCI6421, PCI6611, PCI6621, PCI7411, PCI7421, PCI7611, PCI7621 Secure Digital (SD) Controller
None of these work and I can find no support anywhere for them:
SMBus
Audio ("unknown codec")
Modem ("no codec available")
Wireless
FlashMedia
SD/MMCAdditionally, the system clock runs at 2x normal speed with PowerNow enabled.
Am I stuck with running XP on this thing?
__
Chuck
-
Quoted 8 lines
Quoted 8 lines
You already had an answer on the audio. Your answer on the wireless is ndiswrapper. You should really be looking at the Linux r3000 list, which handles much more than that now. The information for that list is:
LinuxR3000 mailing list
[email protected]
http://lists.pcxperience.com/cgi-bin/mailman/listinfo/linuxr3000
Wiki at http://prinsig.se/weekee/
Or help to rewrite from scracth broadcom drivers see
http://bcm-specs.sipsolutions.net/ for the specs. Unfortunatly, I have no time to do this but I expect somebody have...
Quoted 26 lines
Quoted 13 lines
If those folks don't know how to make you notebook run, you are in serious trouble. I have a Compaq R3120US, which I learned how to set up from the people over there. Notebooks are very different from most other computers, and you can expect to take some extra time and effort to get one set up.
An important note about your wireless is that even with ndiswrapper, not all Windows drivers are created equal, and you may need to try several for the same chip from different sources to find one that works.
Good luck with your SD/MMC reader, that tends to be something that doesn't work under Linux because the manufacturers haven't released the information needed to create proper drivers for them.
Quoted 7 lines
Mandriva tends to work great on notebooks, once you install the proper wireless driver, I have had good luck with Mepis as well, and I know many people running Fedora as well. Your other big challenge, maybe the biggest one, is going to be the display, at least if you have an uncommon display like the 1280 X 800 on my notebook.
Paul
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 2 lines · Chuck Ebbert
I just bought a new notebook. Here is the output from lspci using the latest pci.ids file from sourceforge:
I'd suggest researching before buying.
Signature · 2 lines
http://www.PowerDNS.com Open source, database driven DNS Software http://netherlabs.nl Open and Closed source services
Quoted 1 line
05:02.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
Give 'ndiswrapper' a try. Works pretty well for me.
Folkert van Heusden
Signature · 6 lines
Try MultiTail! Multiple windows with logfiles, filtered with regular expressions, colored output, etc. etc. www.vanheusden.com/multitail/ ---------------------------------------------------------------------- Get your PGP/GPG key signed at www.biglumber.com! ---------------------------------------------------------------------- Phone: +31-6-41278122, PGP-key: 1F28D8AE, www.vanheusden.com
Quoted 13 lines · Chuck Ebbert
I just bought a new notebook. Here is the output from lspci using the latest pci.ids file from sourceforge:
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc: Unknown device 5a3f
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI 00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02)
This is an ac97, try the intel sound driver.
Quoted 1 line
00:14.6 Modem: ATI Technologies Inc: Unknown device 4378 (rev 02)
No Way.
Quoted 6 lines
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 VGA compatible controller: ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Should work.
Quoted 1 line
05:02.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
linuxant.com or ndiswrapper. I believe they do not have a driver for Linux.
Quoted 5 lines
05:09.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
05:09.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
05:09.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
05:09.4 Class 0805: Texas Instruments PCI6411, PCI6421, PCI6611, PCI6621, PCI7411, PCI7421, PCI7611, PCI7621 Secure Digital (SD) Controller
Quoted 7 lines
None of these work and I can find no support anywhere for them:
SMBus
Audio ("unknown codec")
Modem ("no codec available")
Wireless
FlashMedia
Doubt it.
Quoted 1 line
SD/MMC
Doubt it.
Quoted 2 lines
Additionally, the system clock runs at 2x normal speed with PowerNow enabled.
Most likely an ACPI or Windowish ACPI with your laptop.
You are not even saying which laptop you are with. Check google and the linux on laptops website.
.Alejandro
Quoted 10 lines
Am I stuck with running XP on this thing?
__
Chuck
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Chuck Ebbert <[email protected]> disait dernièrement que :
Quoted 2 lines
I just bought a new notebook. Here is the output from lspci using the latest pci.ids file from sourceforge:
I have got the same machine or so and it runs nicely a linux kernel.
Quoted 11 lines
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01) 00:01.0 PCI bridge: ATI Technologies Inc: Unknown device 5a3f
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller 00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller 00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller 00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11) 00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI 00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400
AC'97 Audio Controller (rev 02)
snd-ati-ixp or snd-ati-ixp-modem
Quoted 7 lines
00:14.6 Modem: ATI Technologies Inc: Unknown device 4378 (rev 02)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 VGA compatible controller: ATI Technologies Inc ATI Radeon
XPRESS 200M 5955 (PCIE)
no 3d for now, or maybe in Dave Airlie's latest drm tree which seems to have r300 in it. But to have X actually use it, you need the latest cvs from X.org and Mesa 6.x
Quoted 3 lines
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 05:02.0 Network controller: Broadcom Corporation BCM4318 [AirForce
One 54g] 802.11g Wireless LAN Controller (rev 02)
it is a mini pci card. take it away and put an ipw2200 in here (beware of the killswitch if it is an ACER)
Quoted 4 lines
05:09.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
05:09.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
05:09.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
05:09.4 Class 0805: Texas Instruments PCI6411, PCI6421, PCI6611, PCI6621, PCI7411, PCI7421, PCI7611, PCI7621 Secure Digital (SD) Controller0
as mentioned in another
Quoted 3 lines
None of these work and I can find no support anywhere for them:
SMBus
the bioses released by phoenix seem a little broken. try a 2.6.13 kernel with the option ec_burst=1.
Quoted 9 lines
Audio ("unknown codec")
Modem ("no codec available")
Wireless
FlashMedia
SD/MMCAdditionally, the system clock runs at 2x normal speed with PowerNow enabled.
Am I stuck with running XP on this thing?
I do not think so :)
another problem is the Synaptics device, which does not seem to come up if the framebuffer is used....
Signature · 1 line
Mathieu
Quoted 2 lines · Mathieu
the bioses released by phoenix seem a little broken. try a 2.6.13 kernel with the option ec_burst=1.
I agree with the broken phoenix part but be careful playing with ec_burst. When it was set to default pre-2.6.13-rc6 it caused my laptop to overheat and trip the thermal shutdown on several occasions before I figured out what the hell was going on (the fan wasn't getting spun when needed).
good luck,
-cp
Signature · 1 line
". . . tell 'em we use Linux." -- Dave Chappelle