Add Vitesse 8244 PHY for MPC8641 HPCN platform.
Subsystems (3)
PATCH v3 9/9 Add Vitesse 8244 PHY for MPC8641 HPCN platform.
Signed-off-by Kriston Carson <[email protected]>
Signed-off-by Xianghua Xiao <[email protected]>
Signed-off-by Jon Loeliger <[email protected]>
Acked-by Jeff Garzik <[email protected]>
---
drivers/net/Kconfig | 6 +- drivers/net/phy/Kconfig | 5 ++ drivers/net/phy/Makefile | 1 drivers/net/phy/vitesse.c | 112 +++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 121 insertions(+), 3 deletions(-)
drivers/net/Kconfig +3 -3
@@ -2179,11 +2179,11 @@ config SPIDER_NET config GIANFAR tristate "Gianfar Ethernet" - depends on 85xx || 83xx + depends on 85xx || 83xx || PPC_86xx select PHYLIB help - This driver supports the Gigabit TSEC on the MPC85xx - family of chips, and the FEC on the 8540 + This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx, + and MPC86xx family of chips, and the FEC on the 8540. config GFAR_NAPI bool "NAPI Support"
drivers/net/phy/Kconfig +5 -0
@@ -44,6 +44,11 @@ config CICADA_PHY depends on PHYLIB ---help--- Currently supports the cis8204 +config VITESSE_PHY + tristate "Drivers for the Vitesse PHYs" + depends on PHYLIB + ---help--- + Currently supports the vsc8244 endmenu
drivers/net/phy/Makefile +1 -0
@@ -8,3 +8,4 @@ obj-$(CONFIG_DAVICOM_PHY) += davicom.o obj-$(CONFIG_CICADA_PHY) += cicada.o obj-$(CONFIG_LXT_PHY) += lxt.o obj-$(CONFIG_QSEMI_PHY) += qsemi.o +obj-$(CONFIG_VITESSE_PHY) += vitesse.o
drivers/net/phy/vitesse.c new file +112 -0
112 lines not on this page · raw message