Skip to contentSkip to conversation

connect fail : Operation now in progress

Bluez-users Aveek Audhya 2 participants 5 messages May 31, 2007 – Jun 6, 2007 Bluetooth drivers

lore
Share & tools
lore
#0 lore raw

Hi,
I am trying to communicate with a J2ME application running on my
mobile phone(Nokia 6600) using a client program running on a Linux machine (FC6). The 'sdptool browse' reports that the J2ME application is listening on channel 4. The J2ME application is using btspp protocol whereas my client side application is using RFCOMM. But when I run the client application, the 'connect' system-call fails (returns -1) with error value "Operation now in progress". I am using BlueZ protocol stack.
What can be the probable reason for this kind of behavior? Any suggestion is appreciated.

Thanks,
Aveek

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/

_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

#1 lore raw

T24gVGh1LCAyMDA3LTA1LTMxIGF0IDE2OjQ0ICswNTMwLCBBdmVlayBBdWRoeWEgd3JvdGU6Cj4g SGksCj4gCj4gICAgICAgICAgICAgSSBhbSB0cnlpbmcgdG8gY29tbXVuaWNhdGUgd2l0aCBhIEoy TUUgYXBwbGljYXRpb24gcnVubmluZwo+IG9uIG15IG1vYmlsZSBwaG9uZShOb2tpYSA2NjAwKSB1 c2luZyBhIGNsaWVudCBwcm9ncmFtIHJ1bm5pbmcgb24gYQo+IExpbnV4IG1hY2hpbmUgKEZDNiku IFRoZSDigJhzZHB0b29sIGJyb3dzZeKAmSByZXBvcnRzIHRoYXQgdGhlIEoyTUUKPiBhcHBsaWNh dGlvbiBpcyBsaXN0ZW5pbmcgb24gY2hhbm5lbCA0LiBUaGUgSjJNRSBhcHBsaWNhdGlvbiBpcyB1 c2luZwo+IGJ0c3BwIHByb3RvY29sIHdoZXJlYXMgbXkgY2xpZW50IHNpZGUgYXBwbGljYXRpb24g aXMgdXNpbmcgUkZDT01NLiBCdXQKPiB3aGVuIEkgcnVuIHRoZSBjbGllbnQgYXBwbGljYXRpb24s IHRoZSDigJhjb25uZWN04oCZIHN5c3RlbS1jYWxsIGZhaWxzCj4gKHJldHVybnMgLTEpIHdpdGgg ZXJyb3IgdmFsdWUg4oCcT3BlcmF0aW9uIG5vdyBpbiBwcm9ncmVzc+KAnS4gSSBhbSB1c2luZwo+ IEJsdWVaIHByb3RvY29sIHN0YWNrLgo+IAo+IFdoYXQgY2FuIGJlIHRoZSBwcm9iYWJsZSByZWFz b24gZm9yIHRoaXMga2luZCBvZiBiZWhhdmlvcj8gQW55Cj4gc3VnZ2VzdGlvbiBpcyBhcHByZWNp YXRlZC4KCllvdSBwcm9iYWJseSBtYWRlIHRoZSBzb2NrZXQncyBmZCBub24tYmxvY2tpbmcuIEVp dGhlciBtYWtlIGl0IGJsb2NraW5nLApvciBzZXR1cCBhIHdhdGNoZXIgb24gdGhlIGZkIHRvIHdh aXQgZm9yIHRoZSBsaW5rIHRvIGJlIGNyZWF0ZWQuCgpTZWUgcmZjb21tX2Nvbm5lY3QoKSBpbiBi bHVlei11dGlscy9zZXJpYWwvbWFuYWdlci5jCgotLSAKQmFzdGllbiBOb2NlcmEgPGhhZGVzc0Bo YWRlc3MubmV0PiAKCgotLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0t LS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tClRoaXMgU0YubmV0IGVtYWlsIGlzIHNwb25z b3JlZCBieSBEQjIgRXhwcmVzcwpEb3dubG9hZCBEQjIgRXhwcmVzcyBDIC0gdGhlIEZSRUUgdmVy c2lvbiBvZiBEQjIgZXhwcmVzcyBhbmQgdGFrZQpjb250cm9sIG9mIHlvdXIgWE1MLiBObyBsaW1p dHMuIEp1c3QgZGF0YS4gQ2xpY2sgdG8gZ2V0IGl0IG5vdy4KaHR0cDovL3NvdXJjZWZvcmdlLm5l dC9wb3dlcmJhci9kYjIvCl9fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19f X19fX19fCkJsdWV6LWRldmVsIG1haWxpbmcgbGlzdApCbHVlei1kZXZlbEBsaXN0cy5zb3VyY2Vm b3JnZS5uZXQKaHR0cHM6Ly9saXN0cy5zb3VyY2Vmb3JnZS5uZXQvbGlzdHMvbGlzdGluZm8vYmx1 ZXotZGV2ZWwK

#2 lore raw

Hi Nocera,
Thanks for your reply. What I have seen is that my socket's fd is by
default blocking, every time it returns -1 after waiting for sometime. If I set it as non-blocking then it returns -1 immediately.
I have set up a watcher with select() and getsockopt() call.
It's like that ....

s = socket(AF_BLUETOOTH, SOCK_STREAM/*SOCK_SEQPACKET*/, BTPROTO_RFCOMM);

remote_addr.rc_family = AF_BLUETOOTH; // specifies the addressing family of the socket
remote_addr.rc_channel = (uint8_t)4; // port no to connect to str2ba(dest, &remote_addr.rc_bdaddr); // address to connect to

status = connect(s, (struct sockaddr*)&remote_addr, sizeof(struct sockaddr_rc));

if(status < 0)

      {
            if(errno == EINPROGRESS)
            {
                  printf("EINPROGRESS : %s\n",strerror(errno));
                  do
                  {
                        timeout.tv_sec = 25;
                        timeout.tv_usec = 0;
                        FD_ZERO(&wr);
                        FD_ZERO(&rd);     
                        FD_ZERO(&exceptfds);
 
                        FD_SET(s,&wr);
                        FD_SET(s,&rd);
                        FD_SET(s,&exceptfds);
 
                        if((status =
select(s+1,&rd,&wr,&exceptfds,&timeout)) >0 )
                        {
                              //struct protoent *result;
                              len = sizeof(int);
                              //while((result = getprotoent()) != NULL)
                              //printf("name = %s, protocol =

%d\n",result->p_name,result->p_proto);

                  if(getsockopt(s,SOL_RFCOMM,SO_ERROR,(void*)&valopt,&len) <
0)
                              {
                                    printf("Error in getsockopt() %d -
%s\n",errno,strerror(errno));
                                    _exit(0);
                              }
                        
                              if(valopt) // check the value returned
                              {     
                                    printf("Error in delayed connection() %d
- %s\n",valopt,strerror(valopt));
                                    _exit(0);
                              }
                              printf("before break\n");
                              break;
                        }
                        else if(status < 0 && errno != EINTR)
                        {
                              printf("Error connecting %d - %s\n",errno,
strerror(errno));
                              _exit(0);
                        }
                        else
                        {
                              printf("errno = %d\n",errno);
                              perror("Timeout in select(). exiting... ");
                              _exit(0);
                        }
                  }while(1); /**/
            }
            else
            {
                  printf("errno = %d\n",errno);
                  perror("Error in connect. exiting... ");
                  _exit(0);
            }
      }

But for SOL_RFCOMM in getsockopt() I get an error message at run time .. Error in getsockopt() 92 - Protocol not available ..... although SOL_RFCOMM is defined in '/usr/include/Bluetooth/bluetooth.h'. Is it the right way to implement a watcher on a socket fd ?

One thing I forgot to mention that after making connect() call, my mobile phone ask for 'accept connection request', and after pressing 'yes' connect() returns -1 with error value 'Operation now in progress'.

Unfortunately I couldn't find 'manager.c' in 'bluez-utils-3.9/serial/'. The folder doesn't contain any .c file except Makefile, Makefile.am and Makefile.in. 'manager.c' is present only in 'bluez-utils-3.9/daemon' folder, but there is no 'rfcomm_connect()' implementation. Probably we are using different utils version.
Thanks again for your time.

-----Original Message-----
From: Bastien Nocera [mailto:[email protected]]
Sent: Thursday, May 31, 2007 8:38 PM
To: BlueZ development
Cc: [email protected]
Subject: Re: [Bluez-devel] connect fail : Operation now in progress

Quoted 11 lines · Aveek Audhya

Hi,

I am trying to communicate with a J2ME application running
on my mobile phone(Nokia 6600) using a client program running on a Linux machine (FC6). The 'sdptool browse' reports that the J2ME application is listening on channel 4. The J2ME application is using btspp protocol whereas my client side application is using RFCOMM. But when I run the client application, the 'connect' system-call fails (returns -1) with error value "Operation now in progress". I am using BlueZ protocol stack.

Quoted 2 lines

What can be the probable reason for this kind of behavior? Any suggestion is appreciated.

You probably made the socket's fd non-blocking. Either make it blocking, or setup a watcher on the fd to wait for the link to be created.

See rfcomm_connect() in bluez-utils/serial/manager.c

Signature · 12 lines
Bastien Nocera <[email protected]> 
 
 
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/

_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel

#3 lore raw

T24gRnJpLCAyMDA3LTA2LTAxIGF0IDE5OjE4ICswNTMwLCBBdmVlayBBdWRoeWEgd3JvdGU6Cj4g SGkgTm9jZXJhLAo+IAo+ICAgICAgIFRoYW5rcyBmb3IgeW91ciByZXBseS4gV2hhdCBJIGhhdmUg c2VlbiBpcyB0aGF0IG15IHNvY2tldCdzIGZkCj4gaXMgYnkgZGVmYXVsdCBibG9ja2luZywgZXZl cnkgdGltZSBpdCByZXR1cm5zIC0xIGFmdGVyIHdhaXRpbmcgZm9yCj4gc29tZXRpbWUuIElmIEkg c2V0IGl0IGFzIG5vbi1ibG9ja2luZyB0aGVuIGl0IHJldHVybnMgLTEgaW1tZWRpYXRlbHkuCj4g IAo+IAo+ICAgICAgIEkgaGF2ZSBzZXQgdXAgYSB3YXRjaGVyIHdpdGggc2VsZWN0KCkgYW5kIGdl dHNvY2tvcHQoKSBjYWxsLiAKPiAKPiBJdCdzIGxpa2UgdGhhdCAuLi4uCjxzbmlwPgo+IFVuZm9y dHVuYXRlbHkgSSBjb3VsZG7igJl0IGZpbmQg4oCYbWFuYWdlci5j4oCZIGluCj4g4oCYYmx1ZXot dXRpbHMtMy45L3NlcmlhbC/igJkuIFRoZSBmb2xkZXIgZG9lc27igJl0IGNvbnRhaW4gYW55IC5j IGZpbGUKPiBleGNlcHQgTWFrZWZpbGUsIE1ha2VmaWxlLmFtIGFuZCBNYWtlZmlsZS5pbi4g4oCY bWFuYWdlci5j4oCZIGlzIHByZXNlbnQKPiBvbmx5IGluIOKAmGJsdWV6LXV0aWxzLTMuOS9kYWVt b27igJkgZm9sZGVyLCBidXQgdGhlcmUgaXMgbm8KPiDigJhyZmNvbW1fY29ubmVjdCgp4oCZIGlt cGxlbWVudGF0aW9uLiBQcm9iYWJseSB3ZSBhcmUgdXNpbmcgZGlmZmVyZW50Cj4gdXRpbHMgdmVy c2lvbi4KClNlZSBpbiBDVlMsIG9yIGluIGJsdWV6LXV0aWxzIDMuMTEuCgotLSAKQmFzdGllbiBO b2NlcmEgPGhhZGVzc0BoYWRlc3MubmV0PiAKCgotLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0t LS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tClRoaXMgU0YubmV0 IGVtYWlsIGlzIHNwb25zb3JlZCBieSBEQjIgRXhwcmVzcwpEb3dubG9hZCBEQjIgRXhwcmVzcyBD IC0gdGhlIEZSRUUgdmVyc2lvbiBvZiBEQjIgZXhwcmVzcyBhbmQgdGFrZQpjb250cm9sIG9mIHlv dXIgWE1MLiBObyBsaW1pdHMuIEp1c3QgZGF0YS4gQ2xpY2sgdG8gZ2V0IGl0IG5vdy4KaHR0cDov L3NvdXJjZWZvcmdlLm5ldC9wb3dlcmJhci9kYjIvCl9fX19fX19fX19fX19fX19fX19fX19fX19f X19fX19fX19fX19fX19fX19fX19fCkJsdWV6LWRldmVsIG1haWxpbmcgbGlzdApCbHVlei1kZXZl bEBsaXN0cy5zb3VyY2Vmb3JnZS5uZXQKaHR0cHM6Ly9saXN0cy5zb3VyY2Vmb3JnZS5uZXQvbGlz dHMvbGlzdGluZm8vYmx1ZXotZGV2ZWwK

#4 lore raw

I didn't find any major difference between my application and 'manager.c' in bluez-utils. The way it calls socket(), bind(), connect() etc are same as what I am doing. Do you think it can be a baudrate problem as RFCOMM is a serial communication after all? ...

-----Original Message-----
From: Bastien Nocera [mailto:[email protected]]
Sent: Friday, June 01, 2007 7:26 PM
To: BlueZ development
Cc: [email protected]
Subject: Re: [Bluez-devel] connect fail : Operation now in progress

Quoted 10 lines · Aveek Audhya

Hi Nocera,

Thanks for your reply. What I have seen is that my socket's fd
is by default blocking, every time it returns -1 after waiting for sometime. If I set it as non-blocking then it returns -1 immediately.

I have set up a watcher with select() and getsockopt() call.

It's like that ....

<snip>

Quoted 6 lines

Unfortunately I couldn't find 'manager.c' in 'bluez-utils-3.9/serial/'. The folder doesn't contain any .c file except Makefile, Makefile.am and Makefile.in. 'manager.c' is present only in 'bluez-utils-3.9/daemon' folder, but there is no 'rfcomm_connect()' implementation. Probably we are using different utils version.

See in CVS, or in bluez-utils 3.11.

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bluez-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel