Retire CONFIG_COMMANDS finally.
PATCH 23/30 Retire CONFIG_COMMANDS finally.
Strip old CFG_CMD_* symbols out.
Signed-off-by Jon Loeliger <[email protected]>
--- include/cmd_confdefs.h | 130 ------------------------------------------------ 1 files changed, 0 insertions(+), 130 deletions(-)
include/cmd_confdefs.h +0 -130
@@ -21,140 +21,10 @@* MA 02111-1307 USA */ -/* -* Definitions for Configuring the monitor commands -*/ #ifndef _CMD_CONFIG_H#define _CMD_CONFIG_H/* -* Configurable monitor commands -*/ -#define CFG_CMD_BDI 0x00000001ULL/* bdinfo */ -#define CFG_CMD_LOADS 0x00000002ULL/* loads */ -#define CFG_CMD_LOADB 0x00000004ULL/* loadb */ -#define CFG_CMD_IMI 0x00000008ULL/* iminfo */ -#define CFG_CMD_CACHE 0x00000010ULL/* icache, dcache */ -#define CFG_CMD_FLASH 0x00000020ULL/* flinfo, erase, protect */ -#define CFG_CMD_MEMORY 0x00000040ULL/* md, mm, nm, mw, cp, cmp, */ -/* crc, base, loop, mtest */ -#define CFG_CMD_NET 0x00000080ULL/* bootp, tftpboot, rarpboot */ -#define CFG_CMD_ENV 0x00000100ULL/* saveenv */ -#define CFG_CMD_KGDB 0x0000000000000200ULL/* kgdb */ -#define CFG_CMD_PCMCIA 0x00000400ULL/* PCMCIA support */ -#define CFG_CMD_IDE 0x00000800ULL/* IDE harddisk support */ -#define CFG_CMD_PCI 0x00001000ULL/* pciinfo */ -#define CFG_CMD_IRQ 0x00002000ULL/* irqinfo */ -#define CFG_CMD_BOOTD 0x00004000ULL/* bootd */ -#define CFG_CMD_CONSOLE 0x00008000ULL/* coninfo */ -#define CFG_CMD_EEPROM 0x00010000ULL/* EEPROM read/write support */ -#define CFG_CMD_ASKENV 0x00020000ULL/* ask for env variable */ -#define CFG_CMD_RUN 0x00040000ULL/* run command in env variable */ -#define CFG_CMD_ECHO 0x00080000ULL/* echo arguments */ -#define CFG_CMD_I2C 0x00100000ULL/* I2C serial bus support */ -#define CFG_CMD_REGINFO 0x00200000ULL/* Register dump */ -#define CFG_CMD_IMMAP 0x00400000ULL/* IMMR dump support */ -#define CFG_CMD_DATE 0x00800000ULL/* support for RTC, date/time...*/ -#define CFG_CMD_DHCP 0x01000000ULL/* DHCP Support */ -#define CFG_CMD_BEDBUG 0x02000000ULL/* Include BedBug Debugger */ -#define CFG_CMD_FDC 0x04000000ULL/* Floppy Disk Support */ -#define CFG_CMD_SCSI 0x08000000ULL/* SCSI Support */ -#define CFG_CMD_AUTOSCRIPT 0x10000000ULL/* Autoscript Support */ -#define CFG_CMD_MII 0x20000000ULL/* MII support */ -#define CFG_CMD_SETGETDCR 0x40000000ULL/* DCR support on 4xx */ -#define CFG_CMD_BSP 0x80000000ULL/* Board Specific functions */ - -#define CFG_CMD_ELF 0x0000000100000000ULL/* ELF (VxWorks) load/boot cmd */ -#define CFG_CMD_MISC 0x0000000200000000ULL/* Misc functions like sleep etc*/ -#define CFG_CMD_USB 0x0000000400000000ULL/* USB Support */ -#define CFG_CMD_DOC 0x0000000800000000ULL/* Disk-On-Chip Support */ -#define CFG_CMD_JFFS2 0x0000001000000000ULL/* JFFS2 Support */ -#define CFG_CMD_DTT 0x0000002000000000ULL/* Digital Therm and Thermostat */ -#define CFG_CMD_SDRAM 0x0000004000000000ULL/* SDRAM DIMM SPD info printout */ -#define CFG_CMD_DIAG 0x0000008000000000ULL/* Diagnostics */ -#define CFG_CMD_FPGA 0x0000010000000000ULL/* FPGA configuration Support */ -#define CFG_CMD_HWFLOW 0x0000020000000000ULL/* RTS/CTS hw flow control */ -#define CFG_CMD_SAVES 0x0000040000000000ULL/* save S record dump */ -#define CFG_CMD_SPI 0x0000100000000000ULL/* SPI utility */ -#define CFG_CMD_FDOS 0x0000200000000000ULL/* Floppy DOS support */ -#define CFG_CMD_VFD 0x0000400000000000ULL/* VFD support (TRAB) */ -#define CFG_CMD_NAND 0x0000800000000000ULL/* NAND support */ -#define CFG_CMD_BMP 0x0001000000000000ULL/* BMP support */ -#define CFG_CMD_PORTIO 0x0002000000000000ULL/* Port I/O */ -#define CFG_CMD_PING 0x0004000000000000ULL/* ping support */ -#define CFG_CMD_MMC 0x0008000000000000ULL/* MMC support */ -#define CFG_CMD_FAT 0x0010000000000000ULL/* FAT support */ -#define CFG_CMD_IMLS 0x0020000000000000ULL/* List all found images */ -#define CFG_CMD_ITEST 0x0040000000000000ULL/* Integer (and string) test */ -#define CFG_CMD_NFS 0x0080000000000000ULL/* NFS support */ -#define CFG_CMD_REISER 0x0100000000000000ULL/* Reiserfs support */ -#define CFG_CMD_CDP 0x0200000000000000ULL/* Cisco Discovery Protocol */ -#define CFG_CMD_XIMG 0x0400000000000000ULL/* Load part of Multi Image */ -#define CFG_CMD_UNIVERSE 0x0800000000000000ULL/* Tundra Universe Support */ -#define CFG_CMD_EXT2 0x1000000000000000ULL/* EXT2 Support */ -#define CFG_CMD_SNTP 0x2000000000000000ULL/* SNTP support */ -#define CFG_CMD_DISPLAY 0x4000000000000000ULL/* Display support */ -#define CFG_CMD_MFSL 0x8000000000000000ULL/* FSL support for Microblaze */ - -#define CFG_CMD_ALL 0xFFFFFFFFFFFFFFFFULL/* ALL commands */ - -/* Commands that are considered "non-standard" for some reason -* (memory hogs, requires special hardware, not fully tested, etc.) -*/ -#define CFG_CMD_NONSTD (CFG_CMD_ASKENV | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_BMP | \ - CFG_CMD_BSP | \ - CFG_CMD_CACHE | \ - CFG_CMD_CDP | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_DISPLAY | \ - CFG_CMD_DOC | \ - CFG_CMD_DTT | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_EXT2 | \ - CFG_CMD_FDC | \ - CFG_CMD_FAT | \ - CFG_CMD_FDOS | \ - CFG_CMD_HWFLOW | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_IMMAP | \ - CFG_CMD_IRQ | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_KGDB | \ - CFG_CMD_MFSL | \ - CFG_CMD_MII | \ - CFG_CMD_MMC | \ - CFG_CMD_NAND | \ - CFG_CMD_PCI | \ - CFG_CMD_PCMCIA | \ - CFG_CMD_PING | \ - CFG_CMD_PORTIO | \ - CFG_CMD_REGINFO | \ - CFG_CMD_REISER | \ - CFG_CMD_SAVES | \ - CFG_CMD_SCSI | \ - CFG_CMD_SDRAM | \ - CFG_CMD_SNTP | \ - CFG_CMD_SPI | \ - CFG_CMD_UNIVERSE | \ - CFG_CMD_USB | \ - CFG_CMD_VFD ) - -/* Default configuration -*/ -#define CONFIG_CMD_DFL (CFG_CMD_ALL & ~CFG_CMD_NONSTD) - -#ifndef CONFIG_COMMANDS -#define CONFIG_COMMANDS CONFIG_CMD_DFL -#endif - - -/* * Temporary placeholder until all users directly * include the proper include file, "config_bootp.h". */
Signature · 1 line
1.5.2.2.249.g45fd