include/configs/[a-e]*: Cleanup BOOTP and lingering CFG_CMD_*.
PATCH 4/14 include/configs/[a-e]*: Cleanup BOOTP and lingering CFG_CMD_*.
Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h used to be included but CONFIG_BOOTP_MASK was not defined.
Remove lingering references to CFG_CMD_* symbols.
Signed-off-by Jon Loeliger <[email protected]>
--- include/configs/adsvix.h | 9 +++++++++ include/configs/aev.h | 12 ++++++++++-- include/configs/alpr.h | 9 +++++++++ include/configs/at91rm9200dk.h | 9 +++++++++ include/configs/bamboo.h | 9 +++++++++ include/configs/barco.h | 3 ++- include/configs/bubinga.h | 9 +++++++++ include/configs/canmb.h | 9 +++++++++ include/configs/cerf250.h | 9 +++++++++ include/configs/cm4008.h | 9 +++++++++ include/configs/cm41xx.h | 9 +++++++++ include/configs/cmc_pu2.h | 9 +++++++++ include/configs/cmi_mpc5xx.h | 9 +++++++++ include/configs/cobra5272.h | 9 +++++++++ include/configs/cogent_mpc8260.h | 9 +++++++++ include/configs/cogent_mpc8xx.h | 9 +++++++++ include/configs/cpci5200.h | 9 +++++++++ include/configs/cradle.h | 9 +++++++++ include/configs/csb226.h | 9 +++++++++ include/configs/csb637.h | 9 +++++++++ include/configs/dbau1x00.h | 9 +++++++++ include/configs/debris.h | 9 +++++++++ include/configs/delta.h | 9 +++++++++ include/configs/dnp1110.h | 9 +++++++++ include/configs/eXalion.h | 9 +++++++++ include/configs/ebony.h | 9 +++++++++ include/configs/ep8248.h | 13 +++++++++++-- include/configs/ep8260.h | 9 +++++++++ include/configs/ep82xxm.h | 13 +++++++++++-- 29 files changed, 259 insertions(+), 7 deletions(-)
include/configs/adsvix.h +9 -0
@@ -70,6 +70,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/aev.h +10 -2
@@ -92,6 +92,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
@@ -343,8 +352,7 @@#endif /* -* Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, -* which is normally part of the default commands (CFV_CMD_DFL) +* Enable loopw command. */ #define CONFIG_LOOPW
include/configs/alpr.h +9 -0
@@ -212,6 +212,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/at91rm9200dk.h +9 -0
@@ -99,6 +99,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/bamboo.h +9 -0
@@ -318,6 +318,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/barco.h +2 -1
@@ -92,6 +92,8 @@#define CONFIG_CMD_EEPROM #define CONFIG_CMD_PCI +#undef CONFIG_CMD_NET +#define CONFIG_HUSH_PARSER 1/* use "hush" command parser */ #define CONFIG_BOOTDELAY 1
@@ -116,7 +118,6 @@*/ #define CONFIG_PCI /* include pci support */ #undef CONFIG_PCI_PNP -#undef CFG_CMD_NET#define PCI_ENET0_IOADDR 0x80000000#define PCI_ENET0_MEMADDR 0x80000000
include/configs/bubinga.h +9 -0
@@ -139,6 +139,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/canmb.h +9 -0
@@ -49,6 +49,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/cerf250.h +9 -0
@@ -63,6 +63,15 @@#define CONFIG_ENV_OVERWRITE /* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/cm4008.h +9 -0
@@ -60,6 +60,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/cm41xx.h +9 -0
@@ -60,6 +60,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/cmc_pu2.h +9 -0
@@ -114,6 +114,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/cmi_mpc5xx.h +9 -0
@@ -46,6 +46,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/cobra5272.h +9 -0
@@ -132,6 +132,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/cogent_mpc8260.h +9 -0
@@ -89,6 +89,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/cogent_mpc8xx.h +9 -0
@@ -60,6 +60,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/cpci5200.h +9 -0
@@ -100,6 +100,15 @@#endif /* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/cradle.h +9 -0
@@ -63,6 +63,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/csb226.h +9 -0
@@ -59,6 +59,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/csb637.h +9 -0
@@ -101,6 +101,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/dbau1x00.h +9 -0
@@ -81,6 +81,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/debris.h +9 -0
@@ -124,6 +124,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/delta.h +9 -0
@@ -89,6 +89,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/dnp1110.h +9 -0
@@ -68,6 +68,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/eXalion.h +9 -0
@@ -59,6 +59,15 @@/*#define CONFIG_DRAM_SPEED 66 */ /* MHz */ /* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/ebony.h +9 -0
@@ -210,6 +210,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/ep8248.h +11 -2
@@ -125,6 +125,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
@@ -192,13 +201,13 @@#define CFG_JFFS2_LAST_SECTOR 62#define CFG_JFFS2_SORT_FRAGMENTS #define CFG_JFFS_CUSTOM_PART -#endif /* CFG_CMD_JFFS2 */ +#endif #if defined(CONFIG_CMD_I2C )#define CONFIG_HARD_I2C 1/* To enable I2C support */ #define CFG_I2C_SPEED 100000/* I2C speed */ #define CFG_I2C_SLAVE 0x7F/* I2C slave address */ -#endif /* CFG_CMD_I2C */ +#endif #define CFG_MONITOR_BASE TEXT_BASE#if (CFG_MONITOR_BASE <CFG_FLASH_BASE )
include/configs/ep8260.h +9 -0
@@ -292,6 +292,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_all.h>
include/configs/ep82xxm.h +11 -2
@@ -110,6 +110,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
@@ -318,13 +327,13 @@#define CFG_JFFS2_LAST_SECTOR 62#define CFG_JFFS2_SORT_FRAGMENTS #define CFG_JFFS_CUSTOM_PART -#endif /* CFG_CMD_JFFS2 */ +#endif #if defined(CONFIG_CMD_I2C )#define CONFIG_HARD_I2C 1/* To enable I2C support */ #define CFG_I2C_SPEED 100000/* I2C speed */ #define CFG_I2C_SLAVE 0x7F/* I2C slave address */ -#endif /* CFG_CMD_I2C */ +#endif #define CFG_MONITOR_BASE TEXT_BASE#if (CFG_MONITOR_BASE <CFG_FLASH_BASE )
Signature · 1 line
1.5.2.2.249.g45fd