WRITE_RPS1() converts to le32 itself
PATCH 1/1 WRITE_RPS1() converts to le32 itself
... but two ancient drivers had not noticed.
Signed-off-by Al Viro <[email protected]>
--- drivers/media/dvb/ttpci/av7110.c | 40 ++++++++++++++-------------- drivers/media/dvb/ttpci/budget-patch.c | 44 ++++++++++++++++---------------- 2 files changed, 42 insertions(+), 42 deletions(-)
drivers/media/dvb/ttpci/av7110.c +20 -20
@@ -2403,18 +2403,18 @@ static int __devinit av7110_attach(struct saa7146_dev* dev,saa7146_write (dev,MC1 ,MASK_29 );/* RPS1 timeout disable */ saa7146_write (dev,RPS_TOV1 ,0 ); -WRITE_RPS1 (cpu_to_le32 (CMD_PAUSE |EVT_VBI_B )); -WRITE_RPS1 (cpu_to_le32 (CMD_WR_REG_MASK | (GPIO_CTRL >>2 ))); -WRITE_RPS1 (cpu_to_le32 (GPIO3_MSK )); -WRITE_RPS1 (cpu_to_le32 (SAA7146_GPIO_OUTLO <<24 )); +WRITE_RPS1 (CMD_PAUSE |EVT_VBI_B ); +WRITE_RPS1 (CMD_WR_REG_MASK | (GPIO_CTRL >>2 )); +WRITE_RPS1 (GPIO3_MSK ); +WRITE_RPS1 (SAA7146_GPIO_OUTLO <<24 );#if RPS_IRQ /* issue RPS1 interrupt to increment counter */ -WRITE_RPS1 (cpu_to_le32 (CMD_INTERRUPT )); +WRITE_RPS1 (CMD_INTERRUPT );#endif -WRITE_RPS1 (cpu_to_le32 (CMD_STOP )); +WRITE_RPS1 (CMD_STOP );/* Jump to begin of RPS program as safety measure (p37) */ -WRITE_RPS1 (cpu_to_le32 (CMD_JUMP )); -WRITE_RPS1 (cpu_to_le32 (dev->d_rps1.dma_handle)); +WRITE_RPS1 (CMD_JUMP ); +WRITE_RPS1 (dev->d_rps1.dma_handle);#if RPS_IRQ /* set event counter 1 source as RPS1 interrupt (0x03) (rE4 p53)
@@ -2527,28 +2527,28 @@ static int __devinit av7110_attach(struct saa7146_dev* dev, count =0 ;/* Wait Source Line Counter Threshold (p36) */ -WRITE_RPS1 (cpu_to_le32 (CMD_PAUSE |EVT_HS )); +WRITE_RPS1 (CMD_PAUSE |EVT_HS );/* Set GPIO3=1 (p42) */ -WRITE_RPS1 (cpu_to_le32 (CMD_WR_REG_MASK | (GPIO_CTRL >>2 ))); -WRITE_RPS1 (cpu_to_le32 (GPIO3_MSK )); -WRITE_RPS1 (cpu_to_le32 (SAA7146_GPIO_OUTHI <<24 )); +WRITE_RPS1 (CMD_WR_REG_MASK | (GPIO_CTRL >>2 )); +WRITE_RPS1 (GPIO3_MSK ); +WRITE_RPS1 (SAA7146_GPIO_OUTHI <<24 );#if RPS_IRQ /* issue RPS1 interrupt */ -WRITE_RPS1 (cpu_to_le32 (CMD_INTERRUPT )); +WRITE_RPS1 (CMD_INTERRUPT );#endif /* Wait reset Source Line Counter Threshold (p36) */ -WRITE_RPS1 (cpu_to_le32 (CMD_PAUSE |RPS_INV |EVT_HS )); +WRITE_RPS1 (CMD_PAUSE |RPS_INV |EVT_HS );/* Set GPIO3=0 (p42) */ -WRITE_RPS1 (cpu_to_le32 (CMD_WR_REG_MASK | (GPIO_CTRL >>2 ))); -WRITE_RPS1 (cpu_to_le32 (GPIO3_MSK )); -WRITE_RPS1 (cpu_to_le32 (SAA7146_GPIO_OUTLO <<24 )); +WRITE_RPS1 (CMD_WR_REG_MASK | (GPIO_CTRL >>2 )); +WRITE_RPS1 (GPIO3_MSK ); +WRITE_RPS1 (SAA7146_GPIO_OUTLO <<24 );#if RPS_IRQ /* issue RPS1 interrupt */ -WRITE_RPS1 (cpu_to_le32 (CMD_INTERRUPT )); +WRITE_RPS1 (CMD_INTERRUPT );#endif /* Jump to begin of RPS program (p37) */ -WRITE_RPS1 (cpu_to_le32 (CMD_JUMP )); -WRITE_RPS1 (cpu_to_le32 (dev->d_rps1.dma_handle)); +WRITE_RPS1 (CMD_JUMP ); +WRITE_RPS1 (dev->d_rps1.dma_handle);/* Fix VSYNC level */ saa7146_setgpio (dev,3 ,SAA7146_GPIO_OUTLO );
drivers/media/dvb/ttpci/budget-patch.c +22 -22
72 lines not on this page · raw message
Signature · 1 line
1.5.3.GIT