ARM: add register documentation for __enable_mmu
PATCH 10/10 ARM: add register documentation for __enable_mmu
Add some additional documentation on register usage in __enable_mmu to help complete the overall picture.
Signed-off-by Russell King <[email protected]>
--- arch/arm/kernel/head.S | 10 ++++++++++ 1 files changed, 10 insertions(+), 0 deletions(-)
arch/arm/kernel/head.S +10 -0
@@ -303,6 +303,13 @@ __secondary_data: * Setup common bits before finally enabling the MMU. Essentially * this is just loading the page table pointer and domain access * registers. + * + * r0 = cp#15 control register + * r1 = machine ID + * r2 = atags pointer + * r4 = page table pointer + * r9 = processor ID + * r13 = *virtual* address to jump to upon completion */ __enable_mmu: #ifdef CONFIG_ALIGNMENT_TRAP
@@ -335,6 +342,9 @@ ENDPROC(__enable_mmu) * mailing list archives BEFORE sending another post to the list. * * r0 = cp#15 control register + * r1 = machine ID + * r2 = atags pointer + * r9 = processor ID * r13 = *virtual* address to jump to upon completion * * other registers depend on the function called upon completion
Signature · 1 line
1.6.2.5