Preview of DMA mask changes
Subsystems (50)
cover Preview of DMA mask changes
So, this patch set is a preview of the DMA mask changes which I currently have in my tree.
This started out as a request to look at the DMA mask situation, and how to solve the issues which we have on ARM. One of those issues is how to deal with the DT side of things, which I haven't yet addressed.
However, I started off reviewing how the dma_mask and coherent_dma_mask was being used, and what I found was rather messy, and in some cases rather buggy. I tried to get some of the bug fixes in before the last merge window, but it seems that the maintainers preferred to have the full solution rather than a simple -rc suitable bug fix.
So, this is an attempt to clean things up.
The first point here is that drivers performing DMA should be calling dma_set_mask()/dma_set_coherent_mask() in their probe function to verify that DMA can be performed. Lots of ARM drivers omit this step; please refer to the DMA API documentation on this subject.
What this means is that the DMA mask provided by bus code is a default value - nothing more. It doesn't have to accurately reflect what the device is actually capable of. Apart from the storage for dev->dma_mask being initialised for any device which is DMA capable, there is no other initialisation which is strictly necessary at device creation time.
Now, these cleanups address two major areas:
1. The setting of DMA masks, particularly when both the coherent and streaming DMA masks are set together.
2. The initialisation of DMA masks by drivers - this seems to be becoming a popular habbit, one which may not be entirely the right solution. Rather than having this scattered throughout the tree, I've pulled that into a central location (and called it coercing the DMA mask - because it really is about forcing the DMA mask to be that value.)
3. Finally, addressing the long held misbelief that DMA masks somehow correspond with physical addresses. We already have established long ago that dma_addr_t values returned from the DMA API are the values which you program into the DMA controller, and so are the bus addresses. It is _only_ sane that DMA masks are also bus related too, and not related to physical address spaces.
(3) is a very important point for LPAE systems, which may still have less than 4GB of memory, but this memory is all located above the 4GB physical boundary. This means with the current model, any device using a 32-bit DMA mask fails - even though the DMA controller is still only a 32-bit DMA controller but the 32-bit bus addresses map to system memory. To put it another way, the bus addresses have a 4GB physical offset on them.
This work is ongoing, and I'm still fixing the odd bug which the nightly autobuilder randconfigs find (when it doesn't hit some other problem.)
I'm not using get_maintainer.pl for this series yet, because the list of recipients is gigantic and would not pass through vger's filters, let alone other mailing lists. So this initial posting will only be sent to those listed explicitly in Cc:'s in the patches, linux-kernel and linux-arm-kernel... and it will take about an hour to send all these patches out.
Patches based on -rc2.
Documentation/DMA-API-HOWTO.txt | 37 +++++++++------ Documentation/DMA-API.txt | 8 +++ arch/arm/include/asm/dma-mapping.h | 8 +++ arch/arm/mm/dma-mapping.c | 49 ++++++++++++++++++-- arch/arm/mm/init.c | 12 +++--- arch/arm/mm/mm.h | 2 + arch/powerpc/kernel/vio.c | 3 +- block/blk-settings.c | 8 ++-- drivers/amba/bus.c | 6 +-- drivers/ata/pata_ixp4xx_cf.c | 5 ++- drivers/ata/pata_octeon_cf.c | 5 +- drivers/block/nvme-core.c | 7 +-- drivers/crypto/ixp4xx_crypto.c | 48 ++++++++++---------- drivers/dma/amba-pl08x.c | 5 ++ drivers/dma/dw/platform.c | 8 +-- drivers/dma/edma.c | 6 +-- drivers/dma/pl330.c | 4 ++ drivers/firmware/dcdbas.c | 23 +++++----- drivers/firmware/google/gsmi.c | 13 +++-- drivers/gpu/drm/exynos/exynos_drm_drv.c | 7 +++- drivers/gpu/drm/omapdrm/omap_dmm_tiler.c | 5 +- drivers/media/platform/omap3isp/isp.c | 6 +- drivers/media/platform/omap3isp/isp.h | 3 - drivers/mmc/card/queue.c | 3 +- drivers/mmc/host/sdhci-acpi.c | 5 +- drivers/net/ethernet/broadcom/b44.c | 3 +- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 8 +--- drivers/net/ethernet/brocade/bna/bnad.c | 13 ++---- drivers/net/ethernet/emulex/benet/be_main.c | 12 +---- drivers/net/ethernet/intel/e1000/e1000_main.c | 9 +--- drivers/net/ethernet/intel/e1000e/netdev.c | 18 +++----- drivers/net/ethernet/intel/igb/igb_main.c | 18 +++----- drivers/net/ethernet/intel/igbvf/netdev.c | 18 +++----- drivers/net/ethernet/intel/ixgb/ixgb_main.c | 16 ++----- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 15 ++---- drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 15 ++---- drivers/net/ethernet/nxp/lpc_eth.c | 6 ++- drivers/net/ethernet/octeon/octeon_mgmt.c | 5 +- drivers/net/ethernet/sfc/efx.c | 12 +----- drivers/net/wireless/b43/dma.c | 9 +--- drivers/net/wireless/b43legacy/dma.c | 9 +--- drivers/of/platform.c | 3 - drivers/parport/parport_pc.c | 8 +++- drivers/scsi/scsi_lib.c | 2 +- drivers/staging/dwc2/platform.c | 5 +- drivers/staging/et131x/et131x.c | 17 +------ drivers/staging/imx-drm/imx-drm-core.c | 8 +++- drivers/staging/imx-drm/ipuv3-crtc.c | 4 +- drivers/staging/media/dt3155v4l/dt3155v4l.c | 5 +-- drivers/usb/chipidea/ci_hdrc_imx.c | 7 +-- drivers/usb/dwc3/dwc3-exynos.c | 7 +-- drivers/usb/gadget/lpc32xx_udc.c | 4 +- drivers/usb/host/bcma-hcd.c | 3 +- drivers/usb/host/ehci-atmel.c | 7 +-- drivers/usb/host/ehci-octeon.c | 4 +- drivers/usb/host/ehci-omap.c | 10 ++-- drivers/usb/host/ehci-orion.c | 7 +-- drivers/usb/host/ehci-platform.c | 10 ++-- drivers/usb/host/ehci-s5p.c | 7 +-- drivers/usb/host/ehci-spear.c | 7 +-- drivers/usb/host/ehci-tegra.c | 7 +-- drivers/usb/host/ohci-at91.c | 9 ++-- drivers/usb/host/ohci-exynos.c | 7 +-- drivers/usb/host/ohci-nxp.c | 5 +- drivers/usb/host/ohci-octeon.c | 5 +- drivers/usb/host/ohci-omap3.c | 10 ++-- drivers/usb/host/ohci-pxa27x.c | 8 ++-- drivers/usb/host/ohci-sa1111.c | 6 +++ drivers/usb/host/ohci-spear.c | 7 +-- drivers/usb/host/ssb-hcd.c | 3 +- drivers/usb/host/uhci-platform.c | 7 +-- drivers/usb/musb/am35x.c | 50 +++++++-------------- drivers/usb/musb/da8xx.c | 49 +++++++------------- drivers/usb/musb/davinci.c | 48 +++++++------------- drivers/usb/musb/tusb6010.c | 49 +++++++------------- drivers/video/amba-clcd.c | 5 ++ include/linux/amba/bus.h | 2 - include/linux/dma-mapping.h | 31 +++++++++++++ sound/arm/pxa2xx-pcm.c | 9 +--- sound/soc/atmel/atmel-pcm.c | 11 ++--- sound/soc/blackfin/bf5xx-ac97-pcm.c | 11 ++--- sound/soc/blackfin/bf5xx-i2s-pcm.c | 10 ++--- sound/soc/davinci/davinci-pcm.c | 9 +--- sound/soc/fsl/fsl_dma.c | 9 +--- sound/soc/fsl/mpc5200_dma.c | 10 ++--- sound/soc/jz4740/jz4740-pcm.c | 12 ++--- sound/soc/kirkwood/kirkwood-dma.c | 9 +--- sound/soc/nuc900/nuc900-pcm.c | 9 ++-- sound/soc/omap/omap-pcm.c | 11 ++--- sound/soc/pxa/pxa2xx-pcm.c | 11 ++--- sound/soc/s6000/s6000-pcm.c | 9 +--- sound/soc/samsung/dma.c | 11 ++--- sound/soc/samsung/idma.c | 11 ++--- 93 files changed, 492 insertions(+), 565 deletions(-)
RFC PATCH 1/51 DMA-API: provide a helper to set both DMA and coherent DMA masks
Provide a helper to set both the DMA and coherent DMA masks to the same value - this avoids duplicated code in a number of drivers, sometimes with buggy error handling, and also allows us identify which drivers do things differently.
--- Documentation/DMA-API-HOWTO.txt | 37 ++++++++++++++++++++++--------------- Documentation/DMA-API.txt | 8 ++++++++ include/linux/dma-mapping.h | 14 ++++++++++++++ 3 files changed, 44 insertions(+), 15 deletions(-)
Documentation/DMA-API-HOWTO.txt +22 -15
@@ -101,14 +101,23 @@ style to do this even if your device holds the default setting, because this shows that you did think about these issues wrt. your device. -The query is performed via a call to dma_set_mask(): +The query is performed via a call to dma_set_mask_and_coherent(): - int dma_set_mask(struct device *dev, u64 mask); + int dma_set_mask_and_coherent(struct device *dev, u64 mask); -The query for consistent allocations is performed via a call to -dma_set_coherent_mask(): +which will query the mask for both streaming and coherent APIs together. +If you have some special requirements, then the following two separate +queries can be used instead: - int dma_set_coherent_mask(struct device *dev, u64 mask); + The query for streaming mappings is performed via a call to + dma_set_mask(): + + int dma_set_mask(struct device *dev, u64 mask); + + The query for consistent allocations is performed via a call + to dma_set_coherent_mask(): + + int dma_set_coherent_mask(struct device *dev, u64 mask); Here, dev is a pointer to the device struct of your device, and mask is a bit mask describing which bits of an address your device
@@ -137,7 +146,7 @@ exactly why. The standard 32-bit addressing device would do something like this: - if (dma_set_mask(dev, DMA_BIT_MASK(32))) { + if (dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32))) { printk(KERN_WARNING "mydev: No suitable DMA available.\n"); goto ignore_this_device;
@@ -171,22 +180,20 @@ If a card is capable of using 64-bit consistent allocations as well, int using_dac, consistent_using_dac; - if (!dma_set_mask(dev, DMA_BIT_MASK(64))) { + if (!dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64))) { using_dac = 1; consistent_using_dac = 1; - dma_set_coherent_mask(dev, DMA_BIT_MASK(64)); - } else if (!dma_set_mask(dev, DMA_BIT_MASK(32))) { + } else if (!dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32))) { using_dac = 0; consistent_using_dac = 0; - dma_set_coherent_mask(dev, DMA_BIT_MASK(32)); } else { printk(KERN_WARNING "mydev: No suitable DMA available.\n"); goto ignore_this_device; } -dma_set_coherent_mask() will always be able to set the same or a -smaller mask as dma_set_mask(). However for the rare case that a +The coherent coherent mask will always be able to set the same or a +smaller mask as the streaming mask. However for the rare case that a device driver only uses consistent allocations, one would have to check the return value from dma_set_coherent_mask().
@@ -199,9 +206,9 @@ Finally, if your device can only drive the low 24-bits of goto ignore_this_device; } -When dma_set_mask() is successful, and returns zero, the kernel saves -away this mask you have provided. The kernel will use this -information later when you make DMA mappings. +When dma_set_mask() or dma_set_mask_and_coherent() is successful, and +returns zero, the kernel saves away this mask you have provided. The +kernel will use this information later when you make DMA mappings. There is a case which we are aware of at this time, which is worth mentioning in this documentation. If your device supports multiple
Documentation/DMA-API.txt +8 -0
@@ -142,6 +142,14 @@ internal API for use by the platform than an external API for use by driver writers. int +dma_set_mask_and_coherent(struct device *dev, u64 mask) + +Checks to see if the mask is possible and updates the device +streaming and coherent DMA mask parameters if it is. + +Returns: 0 if successful and a negative error if not. + +int dma_set_mask(struct device *dev, u64 mask) Checks to see if the mask is possible and updates the device
include/linux/dma-mapping.h +14 -0
@@ -97,6 +97,20 @@ static inline int dma_set_coherent_mask(struct device *dev, u64 mask) }#endif +/* +* Set both the DMA mask and the coherent DMA mask to the same thing. +* Note that we don't check the return value from dma_set_coherent_mask() +* as the DMA API guarantees that the coherent DMA mask can be set to +* the same or smaller than the streaming DMA mask. +*/ +static inline int dma_set_mask_and_coherent (struct device *dev,u64 mask) +{ +int rc =dma_set_mask (dev, mask); +if (rc ==0 ) +dma_set_coherent_mask (dev, mask); +return rc; +} +extern u64 dma_get_required_mask (struct device *dev);static inline unsigned int dma_get_max_seg_size (struct device *dev)
Signature · 1 line
1.7.4.4
RFC PATCH 2/51 DMA-API: net: brocade/bna/bnad.c: fix 32-bit DMA mask handling
In reply to Russell King - ARM LinuxThe fallback to 32-bit DMA mask is rather odd:
if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) &&
!dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64))) {
*using_dac = true;
} else {
err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
if (err) {
err = dma_set_coherent_mask(&pdev->dev,
DMA_BIT_MASK(32));
if (err)
goto release_regions;
}This means we only try and set the coherent DMA mask if we failed to set a 32-bit DMA mask, and only if both fail do we fail the driver. Adjust this so that if either setting fails, we fail the driver - and thereby end up properly setting both the DMA mask and the coherent DMA mask in the fallback case.
--- drivers/net/ethernet/brocade/bna/bnad.c | 13 ++++--------- 1 files changed, 4 insertions(+), 9 deletions(-)
drivers/net/ethernet/brocade/bna/bnad.c +4 -9
@@ -3300,17 +3300,12 @@ bnad_pci_init(struct bnad *bnad, err =pci_request_regions (pdev,BNAD_NAME );if (err) goto disable_device; -if (!dma_set_mask (&pdev->dev,DMA_BIT_MASK (64 )) && - !dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (64 ))) { +if (!dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (64 ))) { *using_dac = true; }else { - err =dma_set_mask (&pdev->dev,DMA_BIT_MASK (32 )); -if (err) { - err =dma_set_coherent_mask (&pdev->dev, -DMA_BIT_MASK (32 )); -if (err) - goto release_regions; - } + err =dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (32 )); +if (err) + goto release_regions; *using_dac = false; }pci_set_master (pdev);
Signature · 1 line
1.7.4.4
RFC PATCH 3/51 DMA-API: net: intel/e1000e: fix 32-bit DMA mask handling
In reply to Russell King - ARM LinuxThe fallback to 32-bit DMA mask is rather odd:
err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
if (!err) {
err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
if (!err)
pci_using_dac = 1;
} else {
err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
if (err) {
err = dma_set_coherent_mask(&pdev->dev,
DMA_BIT_MASK(32));
if (err) {
dev_err(&pdev->dev,
"No usable DMA configuration, aborting\n");
goto err_dma;
}
}
}This means we only set the coherent DMA mask in the fallback path if the DMA mask set failed, which is silly. This fixes it to set the coherent DMA mask only if dma_set_mask() succeeded, and to error out if either fails.
--- drivers/net/ethernet/intel/e1000e/netdev.c | 18 ++++++------------ 1 files changed, 6 insertions(+), 12 deletions(-)
drivers/net/ethernet/intel/e1000e/netdev.c +6 -12
@@ -6511,21 +6511,15 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)return err; pci_using_dac =0 ; - err =dma_set_mask (&pdev->dev,DMA_BIT_MASK (64 )); + err =dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (64 ));if (!err) { - err =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (64 )); -if (!err) - pci_using_dac =1 ; + pci_using_dac =1 ; }else { - err =dma_set_mask (&pdev->dev,DMA_BIT_MASK (32 )); + err =dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (32 ));if (err) { - err =dma_set_coherent_mask (&pdev->dev, -DMA_BIT_MASK (32 )); -if (err) { -dev_err (&pdev->dev, -"No usable DMA configuration, aborting\n" ); - goto err_dma; - } +dev_err (&pdev->dev, +"No usable DMA configuration, aborting\n" ); + goto err_dma; } }
Signature · 1 line
1.7.4.4
RFC PATCH 4/51 DMA-API: net: intel/igb: fix 32-bit DMA mask handling
In reply to Russell King - ARM LinuxThe fallback to 32-bit DMA mask is rather odd:
err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
if (!err) {
err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
if (!err)
pci_using_dac = 1;
} else {
err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
if (err) {
err = dma_set_coherent_mask(&pdev->dev,
DMA_BIT_MASK(32));
if (err) {
dev_err(&pdev->dev,
"No usable DMA configuration, aborting\n");
goto err_dma;
}
}
}This means we only set the coherent DMA mask in the fallback path if the DMA mask set failed, which is silly. This fixes it to set the coherent DMA mask only if dma_set_mask() succeeded, and to error out if either fails.
--- drivers/net/ethernet/intel/igb/igb_main.c | 18 ++++++------------ 1 files changed, 6 insertions(+), 12 deletions(-)
drivers/net/ethernet/intel/igb/igb_main.c +6 -12
@@ -2020,21 +2020,15 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)return err; pci_using_dac =0 ; - err =dma_set_mask (&pdev->dev,DMA_BIT_MASK (64 )); + err =dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (64 ));if (!err) { - err =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (64 )); -if (!err) - pci_using_dac =1 ; + pci_using_dac =1 ; }else { - err =dma_set_mask (&pdev->dev,DMA_BIT_MASK (32 )); + err =dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (32 ));if (err) { - err =dma_set_coherent_mask (&pdev->dev, -DMA_BIT_MASK (32 )); -if (err) { -dev_err (&pdev->dev, -"No usable DMA configuration, aborting\n" ); - goto err_dma; - } +dev_err (&pdev->dev, +"No usable DMA configuration, aborting\n" ); + goto err_dma; } }
Signature · 1 line
1.7.4.4
RFC PATCH 5/51 DMA-API: net: intel/igbvf: fix 32-bit DMA mask handling
In reply to Russell King - ARM LinuxThe fallback to 32-bit DMA mask is rather odd:
err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
if (!err) {
err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
if (!err)
pci_using_dac = 1;
} else {
err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
if (err) {
err = dma_set_coherent_mask(&pdev->dev,
DMA_BIT_MASK(32));
if (err) {
dev_err(&pdev->dev, "No usable DMA "
"configuration, aborting\n");
goto err_dma;
}
}
}This means we only set the coherent DMA mask in the fallback path if the DMA mask set failed, which is silly. This fixes it to set the coherent DMA mask only if dma_set_mask() succeeded, and to error out if either fails.
--- drivers/net/ethernet/intel/igbvf/netdev.c | 18 ++++++------------ 1 files changed, 6 insertions(+), 12 deletions(-)
drivers/net/ethernet/intel/igbvf/netdev.c +6 -12
@@ -2638,21 +2638,15 @@ static int igbvf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)return err; pci_using_dac =0 ; - err =dma_set_mask (&pdev->dev,DMA_BIT_MASK (64 )); + err =dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (64 ));if (!err) { - err =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (64 )); -if (!err) - pci_using_dac =1 ; + pci_using_dac =1 ; }else { - err =dma_set_mask (&pdev->dev,DMA_BIT_MASK (32 )); + err =dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (32 ));if (err) { - err =dma_set_coherent_mask (&pdev->dev, -DMA_BIT_MASK (32 )); -if (err) { -dev_err (&pdev->dev,"No usable DMA " -"configuration, aborting\n" ); - goto err_dma; - } +dev_err (&pdev->dev,"No usable DMA " +"configuration, aborting\n" ); + goto err_dma; } }
Signature · 1 line
1.7.4.4
RFC PATCH 6/51 DMA-API: net: intel/ixgb: fix 32-bit DMA mask handling
In reply to Russell King - ARM LinuxThe fallback to 32-bit DMA mask is rather odd:
err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
if (!err) {
err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
if (!err)
pci_using_dac = 1;
} else {
err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
if (err) {
err = dma_set_coherent_mask(&pdev->dev,
DMA_BIT_MASK(32));
if (err) {
pr_err("No usable DMA configuration, aborting\n");
goto err_dma_mask;
}
}
}This means we only set the coherent DMA mask in the fallback path if the DMA mask set failed, which is silly. This fixes it to set the coherent DMA mask only if dma_set_mask() succeeded, and to error out if either fails.
--- drivers/net/ethernet/intel/ixgb/ixgb_main.c | 16 +++++----------- 1 files changed, 5 insertions(+), 11 deletions(-)
drivers/net/ethernet/intel/ixgb/ixgb_main.c +5 -11
@@ -408,20 +408,14 @@ ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)return err; pci_using_dac =0 ; - err =dma_set_mask (&pdev->dev,DMA_BIT_MASK (64 )); + err =dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (64 ));if (!err) { - err =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (64 )); -if (!err) - pci_using_dac =1 ; + pci_using_dac =1 ; }else { - err =dma_set_mask (&pdev->dev,DMA_BIT_MASK (32 )); + err =dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (32 ));if (err) { - err =dma_set_coherent_mask (&pdev->dev, -DMA_BIT_MASK (32 )); -if (err) { -pr_err ("No usable DMA configuration, aborting\n" ); - goto err_dma_mask; - } +pr_err ("No usable DMA configuration, aborting\n" ); + goto err_dma_mask; } }
Signature · 1 line
1.7.4.4
RFC PATCH 7/51 DMA-API: net: intel/ixgbe: fix 32-bit DMA mask handling
In reply to Russell King - ARM LinuxThe fallback to 32-bit DMA mask is rather odd:
if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) &&
!dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64))) {
pci_using_dac = 1;
} else {
err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
if (err) {
err = dma_set_coherent_mask(&pdev->dev,
DMA_BIT_MASK(32));
if (err) {
dev_err(&pdev->dev,
"No usable DMA configuration, aborting\n");
goto err_dma;
}
}
pci_using_dac = 0;
}This means we only set the coherent DMA mask in the fallback path if the DMA mask set failed, which is silly. This fixes it to set the coherent DMA mask only if dma_set_mask() succeeded, and to error out if either fails.
--- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 15 +++++---------- 1 files changed, 5 insertions(+), 10 deletions(-)
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +5 -10
@@ -7349,19 +7349,14 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)if (err)return err; -if (!dma_set_mask (&pdev->dev,DMA_BIT_MASK (64 )) && - !dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (64 ))) { +if (!dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (64 ))) { pci_using_dac =1 ; }else { - err =dma_set_mask (&pdev->dev,DMA_BIT_MASK (32 )); + err =dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (32 ));if (err) { - err =dma_set_coherent_mask (&pdev->dev, -DMA_BIT_MASK (32 )); -if (err) { -dev_err (&pdev->dev, -"No usable DMA configuration, aborting\n" ); - goto err_dma; - } +dev_err (&pdev->dev, +"No usable DMA configuration, aborting\n" ); + goto err_dma; } pci_using_dac =0 ; }
Signature · 1 line
1.7.4.4
RFC PATCH 8/51 DMA-API: net: intel/ixgbevf: fix 32-bit DMA mask handling
In reply to Russell King - ARM LinuxThe fallback to 32-bit DMA mask is rather odd:
if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) &&
!dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64))) {
pci_using_dac = 1;
} else {
err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
if (err) {
err = dma_set_coherent_mask(&pdev->dev,
DMA_BIT_MASK(32));
if (err) {
dev_err(&pdev->dev, "No usable DMA "
"configuration, aborting\n");
goto err_dma;
}
}
pci_using_dac = 0;
}This means we only set the coherent DMA mask in the fallback path if the DMA mask set failed, which is silly. This fixes it to set the coherent DMA mask only if dma_set_mask() succeeded, and to error out if either fails.
--- drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 15 +++++---------- 1 files changed, 5 insertions(+), 10 deletions(-)
drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c +5 -10
@@ -3326,19 +3326,14 @@ static int ixgbevf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)if (err)return err; -if (!dma_set_mask (&pdev->dev,DMA_BIT_MASK (64 )) && - !dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (64 ))) { +if (!dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (64 ))) { pci_using_dac =1 ; }else { - err =dma_set_mask (&pdev->dev,DMA_BIT_MASK (32 )); + err =dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (32 ));if (err) { - err =dma_set_coherent_mask (&pdev->dev, -DMA_BIT_MASK (32 )); -if (err) { -dev_err (&pdev->dev,"No usable DMA " -"configuration, aborting\n" ); - goto err_dma; - } +dev_err (&pdev->dev,"No usable DMA " +"configuration, aborting\n" ); + goto err_dma; } pci_using_dac =0 ; }
Signature · 1 line
1.7.4.4
RFC PATCH 9/51 DMA-API: net: broadcom/b44: replace dma_set_mask()+dma_set_coherent_mask() with new helper
In reply to Russell King - ARM LinuxReplace the following sequence:
dma_set_mask(dev, mask); dma_set_coherent_mask(dev, mask);
with a call to the new helper dma_set_mask_and_coherent().
--- drivers/net/ethernet/broadcom/b44.c | 3 +-- 1 files changed, 1 insertions(+), 2 deletions(-)
drivers/net/ethernet/broadcom/b44.c +1 -2
@@ -2183,8 +2183,7 @@ static int b44_init_one(struct ssb_device *sdev, goto err_out_free_dev; } -if (dma_set_mask (sdev->dma_dev,DMA_BIT_MASK (30 )) || -dma_set_coherent_mask (sdev->dma_dev,DMA_BIT_MASK (30 ))) { +if (dma_set_mask_and_coherent (sdev->dma_dev,DMA_BIT_MASK (30 ))) {dev_err (sdev->dev,"Required 30BIT DMA mask unsupported by the system\n" ); goto err_out_powerdown;
Signature · 1 line
1.7.4.4
RFC PATCH 10/51 DMA-API: net: broadcom/bnx2x: replace dma_set_mask()+dma_set_coherent_mask() with new helper
In reply to Russell King - ARM LinuxReplace the following sequence:
dma_set_mask(dev, mask); dma_set_coherent_mask(dev, mask);
with a call to the new helper dma_set_mask_and_coherent().
--- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 8 ++------ 1 files changed, 2 insertions(+), 6 deletions(-)
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +2 -6
@@ -12035,13 +12035,9 @@ static int bnx2x_set_coherency_mask(struct bnx2x *bp) {struct device *dev = &bp->pdev->dev; -if (dma_set_mask (dev,DMA_BIT_MASK (64 )) ==0 ) { +if (dma_set_mask_and_coherent (dev,DMA_BIT_MASK (64 )) ==0 ) { bp->flags |=USING_DAC_FLAG ; -if (dma_set_coherent_mask (dev,DMA_BIT_MASK (64 )) !=0 ) { -dev_err (dev,"dma_set_coherent_mask failed, aborting\n" ); -return -EIO ; - } - }else if (dma_set_mask (dev,DMA_BIT_MASK (32 )) !=0 ) { + }else if (dma_set_mask_and_coherent (dev,DMA_BIT_MASK (32 )) !=0 ) {dev_err (dev,"System does not support DMA, aborting\n" );return -EIO ; }
Signature · 1 line
1.7.4.4
RFC PATCH 11/51 DMA-API: net: emulex/benet: replace dma_set_mask()+dma_set_coherent_mask() with new helper
In reply to Russell King - ARM LinuxReplace the following sequence:
dma_set_mask(dev, mask); dma_set_coherent_mask(dev, mask);
with a call to the new helper dma_set_mask_and_coherent().
--- drivers/net/ethernet/emulex/benet/be_main.c | 12 ++---------- 1 files changed, 2 insertions(+), 10 deletions(-)
drivers/net/ethernet/emulex/benet/be_main.c +2 -10
@@ -4232,19 +4232,11 @@ static int be_probe(struct pci_dev *pdev, const struct pci_device_id *pdev_id) adapter->netdev = netdev;SET_NETDEV_DEV (netdev, &pdev->dev); - status =dma_set_mask (&pdev->dev,DMA_BIT_MASK (64 )); + status =dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (64 ));if (!status) { - status =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (64 )); -if (status <0 ) { -dev_err (&pdev->dev,"dma_set_coherent_mask failed\n" ); - goto free_netdev; - } netdev->features |=NETIF_F_HIGHDMA ; }else { - status =dma_set_mask (&pdev->dev,DMA_BIT_MASK (32 )); -if (!status) - status =dma_set_coherent_mask (&pdev->dev, -DMA_BIT_MASK (32 )); + status =dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (32 ));if (status) {dev_err (&pdev->dev,"Could not set PCI DMA Mask\n" ); goto free_netdev;
Signature · 1 line
1.7.4.4
RFC PATCH 12/51 DMA-API: net: intel/e1000: replace dma_set_mask()+dma_set_coherent_mask() with new helper
In reply to Russell King - ARM LinuxReplace the following sequence:
dma_set_mask(dev, mask); dma_set_coherent_mask(dev, mask);
with a call to the new helper dma_set_mask_and_coherent().
--- drivers/net/ethernet/intel/e1000/e1000_main.c | 9 ++------- 1 files changed, 2 insertions(+), 7 deletions(-)
drivers/net/ethernet/intel/e1000/e1000_main.c +2 -7
@@ -1018,19 +1018,14 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)*/ pci_using_dac =0 ;if ((hw->bus_type == e1000_bus_type_pcix) && - !dma_set_mask (&pdev->dev,DMA_BIT_MASK (64 ))) { -/* according to DMA-API-HOWTO, coherent calls will always -* succeed if the set call did -*/ -dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (64 )); + !dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (64 ))) { pci_using_dac =1 ; }else { - err =dma_set_mask (&pdev->dev,DMA_BIT_MASK (32 )); + err =dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (32 ));if (err) {pr_err ("No usable DMA config, aborting\n" ); goto err_dma; } -dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (32 )); } netdev->netdev_ops = &e1000_netdev_ops;
Signature · 1 line
1.7.4.4
RFC PATCH 13/51 DMA-API: net: sfc/efx.c: replace dma_set_mask()+dma_set_coherent_mask() with new helper
In reply to Russell King - ARM LinuxReplace the following sequence:
dma_set_mask(dev, mask); dma_set_coherent_mask(dev, mask);
with a call to the new helper dma_set_mask_and_coherent().
--- drivers/net/ethernet/sfc/efx.c | 12 +----------- 1 files changed, 1 insertions(+), 11 deletions(-)
drivers/net/ethernet/sfc/efx.c +1 -11
@@ -1164,7 +1164,7 @@ static int efx_init_io(struct efx_nic *efx)*/ while (dma_mask >0x7fffffffUL ) {if (dma_supported (&pci_dev->dev, dma_mask)) { - rc =dma_set_mask (&pci_dev->dev, dma_mask); + rc =dma_set_mask_and_coherent (&pci_dev->dev, dma_mask);if (rc ==0 )break ; }
@@ -1177,16 +1177,6 @@ static int efx_init_io(struct efx_nic *efx) }netif_dbg (efx, probe, efx->net_dev,"using DMA mask %llx\n" , (unsigned long long ) dma_mask); - rc =dma_set_coherent_mask (&pci_dev->dev, dma_mask); -if (rc) { -/* dma_set_coherent_mask() is not *allowed* to -* fail with a mask that dma_set_mask() accepted, -* but just in case... -*/ -netif_err (efx, probe, efx->net_dev, -"failed to set consistent DMA mask\n" ); - goto fail2; - } efx->membase_phys =pci_resource_start (efx->pci_dev,EFX_MEM_BAR ); rc =pci_request_region (pci_dev,EFX_MEM_BAR ,"sfc" );
Signature · 1 line
1.7.4.4
RFC PATCH 14/51 DMA-API: net: b43: replace dma_set_mask()+dma_set_coherent_mask() with new helper
In reply to Russell King - ARM LinuxReplace the following sequence:
dma_set_mask(dev, mask); dma_set_coherent_mask(dev, mask);
with a call to the new helper dma_set_mask_and_coherent().
--- drivers/net/wireless/b43/dma.c | 9 +++------ 1 files changed, 3 insertions(+), 6 deletions(-)
drivers/net/wireless/b43/dma.c +3 -6
@@ -1065,12 +1065,9 @@ static int b43_dma_set_mask(struct b43_wldev *dev, u64 mask)/* Try to set the DMA mask. If it fails, try falling back to a * lower mask, as we can always also support a lower one. */ while (1 ) { - err =dma_set_mask (dev->dev->dma_dev, mask); -if (!err) { - err =dma_set_coherent_mask (dev->dev->dma_dev, mask); -if (!err) -break ; - } + err =dma_set_mask_and_coherent (dev->dev->dma_dev, mask); +if (!err) +break ;if (mask ==DMA_BIT_MASK (64 )) { mask =DMA_BIT_MASK (32 ); fallback = true;
Signature · 1 line
1.7.4.4
RFC PATCH 15/51 DMA-API: net: b43legacy: replace dma_set_mask()+dma_set_coherent_mask() with new helper
In reply to Russell King - ARM LinuxReplace the following sequence:
dma_set_mask(dev, mask); dma_set_coherent_mask(dev, mask);
with a call to the new helper dma_set_mask_and_coherent().
--- drivers/net/wireless/b43legacy/dma.c | 9 +++------ 1 files changed, 3 insertions(+), 6 deletions(-)
drivers/net/wireless/b43legacy/dma.c +3 -6
@@ -807,12 +807,9 @@ static int b43legacy_dma_set_mask(struct b43legacy_wldev *dev, u64 mask)/* Try to set the DMA mask. If it fails, try falling back to a * lower mask, as we can always also support a lower one. */ while (1 ) { - err =dma_set_mask (dev->dev->dma_dev, mask); -if (!err) { - err =dma_set_coherent_mask (dev->dev->dma_dev, mask); -if (!err) -break ; - } + err =dma_set_mask_and_coherent (dev->dev->dma_dev, mask); +if (!err) +break ;if (mask ==DMA_BIT_MASK (64 )) { mask =DMA_BIT_MASK (32 ); fallback = true;
Signature · 1 line
1.7.4.4
RFC PATCH 16/51 DMA-API: ppc: vio.c: replace dma_set_mask()+dma_set_coherent_mask() with new helper
In reply to Russell King - ARM LinuxReplace the following sequence:
dma_set_mask(dev, mask); dma_set_coherent_mask(dev, mask);
with a call to the new helper dma_set_mask_and_coherent().
--- arch/powerpc/kernel/vio.c | 3 +-- 1 files changed, 1 insertions(+), 2 deletions(-)
arch/powerpc/kernel/vio.c +1 -2
@@ -1412,8 +1412,7 @@ struct vio_dev *vio_register_device_node(struct device_node *of_node)/* needed to ensure proper operation of coherent allocations * later, in case driver doesn't set it explicitly */ -dma_set_mask (&viodev->dev,DMA_BIT_MASK (64 )); -dma_set_coherent_mask (&viodev->dev,DMA_BIT_MASK (64 )); +dma_set_mask_and_coherent (&viodev->dev,DMA_BIT_MASK (64 )); }/* register with generic device framework */
Signature · 1 line
1.7.4.4
RFC PATCH 17/51 DMA-API: block: nvme-core: replace dma_set_mask()+dma_set_coherent_mask() with new helper
In reply to Russell King - ARM LinuxReplace the following sequence:
dma_set_mask(dev, mask); dma_set_coherent_mask(dev, mask);
with a call to the new helper dma_set_mask_and_coherent().
--- drivers/block/nvme-core.c | 7 ++----- 1 files changed, 2 insertions(+), 5 deletions(-)
drivers/block/nvme-core.c +2 -5
@@ -1949,11 +1949,8 @@ static int nvme_probe(struct pci_dev *pdev, const struct pci_device_id *id) dev->pci_dev = pdev;pci_set_drvdata (pdev, dev); -if (!dma_set_mask (&pdev->dev,DMA_BIT_MASK (64 ))) -dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (64 )); -else if (!dma_set_mask (&pdev->dev,DMA_BIT_MASK (32 ))) -dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (32 )); -else +if (dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (64 )) && +dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (32 ))) goto disable; result =nvme_set_instance (dev);
Signature · 1 line
1.7.4.4
RFC PATCH 18/51 DMA-API: staging: et131x: replace dma_set_mask()+dma_set_coherent_mask() with new helper
In reply to Russell King - ARM LinuxReplace the following sequence:
dma_set_mask(dev, mask); dma_set_coherent_mask(dev, mask);
with a call to the new helper dma_set_mask_and_coherent().
--- drivers/staging/et131x/et131x.c | 17 ++--------------- 1 files changed, 2 insertions(+), 15 deletions(-)
drivers/staging/et131x/et131x.c +2 -15
@@ -4797,21 +4797,8 @@ static int et131x_pci_setup(struct pci_dev *pdev,pci_set_master (pdev);/* Check the DMA addressing support of this device */ -if (!dma_set_mask (&pdev->dev,DMA_BIT_MASK (64 ))) { - rc =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (64 )); -if (rc <0 ) { -dev_err (&pdev->dev, -"Unable to obtain 64 bit DMA for consistent allocations\n" ); - goto err_release_res; - } - }else if (!dma_set_mask (&pdev->dev,DMA_BIT_MASK (32 ))) { - rc =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (32 )); -if (rc <0 ) { -dev_err (&pdev->dev, -"Unable to obtain 32 bit DMA for consistent allocations\n" ); - goto err_release_res; - } - }else { +if (dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (64 )) || +dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (32 ))) {dev_err (&pdev->dev,"No usable DMA addressing method\n" ); rc = -EIO ; goto err_release_res;
Signature · 1 line
1.7.4.4
RFC PATCH 19/51 DMA-API: media: dt3155v4l: replace dma_set_mask()+dma_set_coherent_mask() with new helper
In reply to Russell King - ARM LinuxReplace the following sequence:
dma_set_mask(dev, mask); dma_set_coherent_mask(dev, mask);
with a call to the new helper dma_set_mask_and_coherent().
--- drivers/staging/media/dt3155v4l/dt3155v4l.c | 5 +---- 1 files changed, 1 insertions(+), 4 deletions(-)
drivers/staging/media/dt3155v4l/dt3155v4l.c +1 -4
@@ -901,10 +901,7 @@ dt3155_probe(struct pci_dev *pdev, const struct pci_device_id *id)int err;struct dt3155_priv *pd; - err =dma_set_mask (&pdev->dev,DMA_BIT_MASK (32 )); -if (err) -return -ENODEV ; - err =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (32 )); + err =dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (32 ));if (err)return -ENODEV ; pd =kzalloc (sizeof (*pd),GFP_KERNEL );
Signature · 1 line
1.7.4.4
RFC PATCH 20/51 DMA-API: usb: bcma: replace dma_set_mask()+dma_set_coherent_mask() with new helper
In reply to Russell King - ARM LinuxReplace the following sequence:
dma_set_mask(dev, mask); dma_set_coherent_mask(dev, mask);
with a call to the new helper dma_set_mask_and_coherent().
--- drivers/usb/host/bcma-hcd.c | 3 +-- 1 files changed, 1 insertions(+), 2 deletions(-)
drivers/usb/host/bcma-hcd.c +1 -2
@@ -227,8 +227,7 @@ static int bcma_hcd_probe(struct bcma_device *dev)/* TODO: Probably need checks here; is the core connected? */ -if (dma_set_mask (dev->dma_dev,DMA_BIT_MASK (32 )) || -dma_set_coherent_mask (dev->dma_dev,DMA_BIT_MASK (32 ))) +if (dma_set_mask_and_coherent (dev->dma_dev,DMA_BIT_MASK (32 )))return -EOPNOTSUPP ; usb_dev =kzalloc (sizeof (struct bcma_hcd_device ),GFP_KERNEL );
Signature · 1 line
1.7.4.4
RFC PATCH 21/51 DMA-API: usb: ssb-hcd: replace dma_set_mask()+dma_set_coherent_mask() with new helper
In reply to Russell King - ARM LinuxReplace the following sequence:
dma_set_mask(dev, mask); dma_set_coherent_mask(dev, mask);
with a call to the new helper dma_set_mask_and_coherent().
--- drivers/usb/host/ssb-hcd.c | 3 +-- 1 files changed, 1 insertions(+), 2 deletions(-)
drivers/usb/host/ssb-hcd.c +1 -2
@@ -163,8 +163,7 @@ static int ssb_hcd_probe(struct ssb_device *dev,/* TODO: Probably need checks here; is the core connected? */ -if (dma_set_mask (dev->dma_dev,DMA_BIT_MASK (32 )) || -dma_set_coherent_mask (dev->dma_dev,DMA_BIT_MASK (32 ))) +if (dma_set_mask_and_coherent (dev->dma_dev,DMA_BIT_MASK (32 )))return -EOPNOTSUPP ; usb_dev =kzalloc (sizeof (struct ssb_hcd_device ),GFP_KERNEL );
Signature · 1 line
1.7.4.4
RFC PATCH 22/51 DMA-API: amba: get rid of separate dma_mask
In reply to Russell King - ARM LinuxAMBA Primecell devices always treat streaming and coherent DMA exactly the same, so there's no point in having the masks separated.
--- drivers/amba/bus.c | 6 +----- drivers/of/platform.c | 3 --- include/linux/amba/bus.h | 2 -- 3 files changed, 1 insertions(+), 10 deletions(-)
drivers/amba/bus.c +1 -5
@@ -552,7 +552,6 @@ amba_aphb_device_add(struct device *parent, const char *name,if (!dev)return ERR_PTR (-ENOMEM ); - dev->dma_mask = dma_mask; dev->dev.coherent_dma_mask = dma_mask; dev->irq[0 ] = irq1; dev->irq[1 ] = irq2;
@@ -619,7 +618,7 @@ static void amba_device_initialize(struct amba_device *dev, const char *name)dev_set_name (&dev->dev,"%s" , name); dev->dev.release = amba_device_release; dev->dev.bus = &amba_bustype; - dev->dev.dma_mask = &dev->dma_mask; + dev->dev.dma_mask = &dev->dev.coherent_dma_mask; dev->res.name =dev_name (&dev->dev); }
@@ -663,9 +662,6 @@ int amba_device_register(struct amba_device *dev, struct resource *parent)amba_device_initialize (dev, dev->dev.init_name); dev->dev.init_name =NULL ; -if (!dev->dev.coherent_dma_mask && dev->dma_mask) -dev_warn (&dev->dev,"coherent dma mask is unset\n" ); -return amba_device_add (dev, parent); }
drivers/of/platform.c +0 -3
@@ -277,9 +277,6 @@ static struct amba_device *of_amba_device_create(struct device_node *node,else of_device_make_bus_id (&dev->dev); -/* setup amba-specific device info */ - dev->dma_mask = ~0 ; -/* Allow the HW Peripheral ID to be overridden */ prop =of_get_property (node,"arm,primecell-periphid" ,NULL );if (prop)
include/linux/amba/bus.h +0 -2
@@ -30,7 +30,6 @@ struct amba_device {struct device dev;struct resource res;struct clk *pclk; -u64 dma_mask;unsigned int periphid;unsigned int irq[AMBA_NR_IRQS ]; };
@@ -131,7 +130,6 @@ struct amba_device name##_device = { \ struct amba_device name##_device = { \ .dev =__AMBA_DEV (busid, data, ~0ULL ), \ .res =DEFINE_RES_MEM (base,SZ_4K ), \ - .dma_mask = ~0ULL , \ .irq = irqs, \ .periphid = id, \ }
Signature · 1 line
1.7.4.4
RFC PATCH 23/51 DMA-API: dma: pl08x: add dma_set_mask_and_coherent() call
In reply to Russell King - ARM LinuxThe DMA API requires drivers to call the appropriate dma_set_mask() functions before doing any DMA mapping. Add this required call to the AMBA PL08x driver.
--- drivers/dma/amba-pl08x.c | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-)
drivers/dma/amba-pl08x.c +5 -0
@@ -1853,6 +1853,11 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)if (ret)return ret; +/* Ensure that we can do DMA */ + ret =dma_set_mask_and_coherent (&adev->dev,DMA_BIT_MASK (32 )); +if (ret) + goto out_no_pl08x; +/* Create the driver state holder */ pl08x =kzalloc (sizeof (*pl08x),GFP_KERNEL );if (!pl08x) {
Signature · 1 line
1.7.4.4
RFC PATCH 24/51 DMA-API: dma: pl330: add dma_set_mask_and_coherent() call
In reply to Russell King - ARM LinuxThe DMA API requires drivers to call the appropriate dma_set_mask() functions before doing any DMA mapping. Add this required call to the AMBA PL08x driver.
--- drivers/dma/pl330.c | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-)
drivers/dma/pl330.c +4 -0
@@ -2869,6 +2869,10 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id) pdat = adev->dev.platform_data; + ret =dma_set_mask_and_coherent (&adev->dev,DMA_BIT_MASK (32 )); +if (ret) +return ret; +/* Allocate a new DMAC and its Channels */ pdmac =devm_kzalloc (&adev->dev,sizeof (*pdmac),GFP_KERNEL );if (!pdmac) {
Signature · 1 line
1.7.4.4
RFC PATCH 25/51 DMA-API: video: clcd: add dma_set_mask_and_coherent() call
In reply to Russell King - ARM LinuxThe DMA API requires drivers to call the appropriate dma_set_mask() functions before doing any DMA mapping. Add this required call to the AMBA PL08x driver.
--- drivers/video/amba-clcd.c | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-)
drivers/video/amba-clcd.c +5 -0
@@ -10,6 +10,7 @@* * ARM PrimeCell PL110 Color LCD Controller */ +#include <linux/dma-mapping.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/errno.h>
@@ -551,6 +552,10 @@ static int clcdfb_probe(struct amba_device *dev, const struct amba_id *id)if (!board)return -EINVAL ; + ret =dma_set_mask_and_coherent (&dev->dev,DMA_BIT_MASK (32 )); +if (ret) + goto out; + ret =amba_request_regions (dev,NULL );if (ret) {printk (KERN_ERR "CLCD: unable to reserve regs region\n" );
Signature · 1 line
1.7.4.4
RFC PATCH 26/51 DMA-API: usb: ohci-sa1111: add a note about DMA masks
In reply to Russell King - ARM LinuxAdd a comment to explain why this driver doesn't call any of the DMA API dma_set_mask() functions.
--- drivers/usb/host/ohci-sa1111.c | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-)
drivers/usb/host/ohci-sa1111.c +6 -0
@@ -185,6 +185,12 @@ static int ohci_hcd_sa1111_probe(struct sa1111_dev *dev)if (usb_disabled ())return -ENODEV ; +/* +* We don't call dma_set_mask_and_coherent() here because the +* DMA mask has already been appropraitely setup by the core +* SA-1111 bus code (which includes bug workarounds.) +*/ + hcd =usb_create_hcd (&ohci_sa1111_hc_driver, &dev->dev,"sa1111" );if (!hcd)return -ENOMEM ;
Signature · 1 line
1.7.4.4
RFC PATCH 27/51 DMA-API: provide a helper to setup DMA masks
In reply to Russell King - ARM LinuxMany drivers contain code such as:
dev->dma_mask = &dev->coherent_dma_mask; dev->coherent_dma_mask = MASK;
Let's move this pattern out of drivers and have the DMA API provide a helper for it. This helper uses dma_set_mask_and_coherent() to allow platform issues to be properly dealt with via dma_set_mask()/ dma_is_supported().
--- include/linux/dma-mapping.h | 10 ++++++++++ 1 files changed, 10 insertions(+), 0 deletions(-)
include/linux/dma-mapping.h +10 -0
@@ -111,6 +111,16 @@ static inline int dma_set_mask_and_coherent(struct device *dev, u64 mask)return rc; } +/* +* Similar to the above, except it deals with the case where the device +* does not have dev->dma_mask appropriately setup. +*/ +static inline int dma_coerce_mask_and_coherent (struct device *dev,u64 mask) +{ + dev->dma_mask = &dev->coherent_dma_mask; +return dma_set_mask_and_coherent (dev, mask); +} +extern u64 dma_get_required_mask (struct device *dev);static inline unsigned int dma_get_max_seg_size (struct device *dev)
Signature · 1 line
1.7.4.4
RFC PATCH 28/51 DMA-API: sound: fix dma mask handling in a lot of drivers
In reply to Russell King - ARM LinuxThis code sequence is unsafe in modules:
static u64 mask = DMA_BIT_MASK(something);
...
if (!dev->dma_mask) dev->dma_mask = &mask;
as if a module is reloaded, the mask will be pointing at the original module's mask address, and this can lead to oopses. Moreover, they all follow this with:
if (!dev->coherent_dma_mask) dev->coherent_dma_mask = mask;
where 'mask' is the same value as the statically defined mask, and this bypasses the architecture's check on whether the DMA mask is possible.
Fix these issues by using the new dma_coerce_coherent_and_mask() function.
--- sound/arm/pxa2xx-pcm.c | 9 +++------ sound/soc/atmel/atmel-pcm.c | 11 ++++------- sound/soc/blackfin/bf5xx-ac97-pcm.c | 11 ++++------- sound/soc/blackfin/bf5xx-i2s-pcm.c | 10 ++++------ sound/soc/davinci/davinci-pcm.c | 9 +++------ sound/soc/fsl/fsl_dma.c | 9 +++------ sound/soc/fsl/mpc5200_dma.c | 10 ++++------ sound/soc/jz4740/jz4740-pcm.c | 12 ++++-------- sound/soc/kirkwood/kirkwood-dma.c | 9 +++------ sound/soc/nuc900/nuc900-pcm.c | 9 ++++----- sound/soc/omap/omap-pcm.c | 11 ++++------- sound/soc/pxa/pxa2xx-pcm.c | 11 ++++------- sound/soc/s6000/s6000-pcm.c | 9 +++------ sound/soc/samsung/dma.c | 11 ++++------- sound/soc/samsung/idma.c | 11 ++++------- 15 files changed, 55 insertions(+), 97 deletions(-)
sound/arm/pxa2xx-pcm.c +3 -6
@@ -80,8 +80,6 @@ static struct snd_pcm_ops pxa2xx_pcm_ops = { .mmap = pxa2xx_pcm_mmap, }; -static u64 pxa2xx_pcm_dmamask =0xffffffff ; -int pxa2xx_pcm_new (struct snd_card *card,struct pxa2xx_pcm_client *client,struct snd_pcm **rpcm) {
@@ -97,10 +95,9 @@ int pxa2xx_pcm_new(struct snd_card *card, struct pxa2xx_pcm_client *client, pcm->private_data = client; pcm->private_free = pxa2xx_pcm_free_dma_buffers; -if (!card->dev->dma_mask) - card->dev->dma_mask = &pxa2xx_pcm_dmamask; -if (!card->dev->coherent_dma_mask) - card->dev->coherent_dma_mask =0xffffffff ; + ret =dma_coerce_mask_and_coherent_mask (card->dev,DMA_BIT_MASK (32 )); +if (ret) + goto out;if (play) {int stream =SNDRV_PCM_STREAM_PLAYBACK ;
sound/soc/atmel/atmel-pcm.c +4 -7
@@ -68,18 +68,15 @@ int atmel_pcm_mmap(struct snd_pcm_substream *substream, }EXPORT_SYMBOL_GPL (atmel_pcm_mmap); -static u64 atmel_pcm_dmamask =DMA_BIT_MASK (32 ); -int atmel_pcm_new (struct snd_soc_pcm_runtime *rtd) {struct snd_card *card = rtd->card->snd_card;struct snd_pcm *pcm = rtd->pcm; -int ret =0 ; +int ret; -if (!card->dev->dma_mask) - card->dev->dma_mask = &atmel_pcm_dmamask; -if (!card->dev->coherent_dma_mask) - card->dev->coherent_dma_mask =DMA_BIT_MASK (32 ); + ret =dma_coerce_mask_and_coherent (card->dev,DMA_BIT_MASK (32 )); +if (ret) +return ret;if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK ].substream) {pr_debug ("atmel-pcm: allocating PCM playback DMA buffer\n" );
sound/soc/blackfin/bf5xx-ac97-pcm.c +4 -7
@@ -415,19 +415,16 @@ static void bf5xx_pcm_free_dma_buffers(struct snd_pcm *pcm) } } -static u64 bf5xx_pcm_dmamask =DMA_BIT_MASK (32 ); -static int bf5xx_pcm_ac97_new (struct snd_soc_pcm_runtime *rtd) {struct snd_card *card = rtd->card->snd_card;struct snd_pcm *pcm = rtd->pcm; -int ret =0 ; +int ret;pr_debug ("%s enter\n" , __func__); -if (!card->dev->dma_mask) - card->dev->dma_mask = &bf5xx_pcm_dmamask; -if (!card->dev->coherent_dma_mask) - card->dev->coherent_dma_mask =DMA_BIT_MASK (32 ); + ret =dma_coerce_mask_and_coherent (card->dev,DMA_BIT_MASK (32 )); +if (ret) +return ret;if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK ].substream) { ret = bf5xx_pcm_preallocate_dma_buffer(pcm,
sound/soc/blackfin/bf5xx-i2s-pcm.c +4 -6
@@ -323,18 +323,16 @@ static struct snd_pcm_ops bf5xx_pcm_i2s_ops = { .silence = bf5xx_pcm_silence, }; -static u64 bf5xx_pcm_dmamask =DMA_BIT_MASK (32 ); -static int bf5xx_pcm_i2s_new (struct snd_soc_pcm_runtime *rtd) {struct snd_card *card = rtd->card->snd_card;size_t size = bf5xx_pcm_hardware.buffer_bytes_max; +int ret;pr_debug ("%s enter\n" , __func__); -if (!card->dev->dma_mask) - card->dev->dma_mask = &bf5xx_pcm_dmamask; -if (!card->dev->coherent_dma_mask) - card->dev->coherent_dma_mask =DMA_BIT_MASK (32 ); + ret =dma_coerce_mask_and_coherent (card->dev,DMA_BIT_MASK (32 )); +if (ret) +return ret;return snd_pcm_lib_preallocate_pages_for_all (rtd->pcm,SNDRV_DMA_TYPE_DEV , card->dev, size, size);
sound/soc/davinci/davinci-pcm.c +3 -6
@@ -844,18 +844,15 @@ static void davinci_pcm_free(struct snd_pcm *pcm) } } -static u64 davinci_pcm_dmamask =DMA_BIT_MASK (32 ); -static int davinci_pcm_new (struct snd_soc_pcm_runtime *rtd) {struct snd_card *card = rtd->card->snd_card;struct snd_pcm *pcm = rtd->pcm;int ret; -if (!card->dev->dma_mask) - card->dev->dma_mask = &davinci_pcm_dmamask; -if (!card->dev->coherent_dma_mask) - card->dev->coherent_dma_mask =DMA_BIT_MASK (32 ); + ret =dma_coerce_mask_and_coherent (card->dev,DMA_BIT_MASK (32 )); +if (ret) +return ret;if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK ].substream) { ret = davinci_pcm_preallocate_dma_buffer(pcm,
sound/soc/fsl/fsl_dma.c +3 -6
@@ -298,14 +298,11 @@ static int fsl_dma_new(struct snd_soc_pcm_runtime *rtd) {struct snd_card *card = rtd->card->snd_card;struct snd_pcm *pcm = rtd->pcm; -static u64 fsl_dma_dmamask =DMA_BIT_MASK (36 );int ret; -if (!card->dev->dma_mask) - card->dev->dma_mask = &fsl_dma_dmamask; - -if (!card->dev->coherent_dma_mask) - card->dev->coherent_dma_mask = fsl_dma_dmamask; + ret =dma_coerce_mask_and_coherent (card->dev,DMA_BIT_MASK (36 )); +if (ret) +return ret;/* Some codecs have separate DAIs for playback and capture, so we * should allocate a DMA buffer only for the streams that are valid.
sound/soc/fsl/mpc5200_dma.c +4 -6
@@ -299,7 +299,6 @@ static struct snd_pcm_ops psc_dma_ops = { .hw_params = psc_dma_hw_params, }; -static u64 psc_dma_dmamask =DMA_BIT_MASK (32 );static int psc_dma_new (struct snd_soc_pcm_runtime *rtd) {struct snd_card *card = rtd->card->snd_card;
@@ -307,15 +306,14 @@ static int psc_dma_new(struct snd_soc_pcm_runtime *rtd)struct snd_pcm *pcm = rtd->pcm;struct psc_dma *psc_dma =snd_soc_dai_get_drvdata (rtd->cpu_dai);size_t size = psc_dma_hardware.buffer_bytes_max; -int rc =0 ; +int rc;dev_dbg (rtd->platform->dev,"psc_dma_new(card=%p, dai=%p, pcm=%p)\n" , card, dai, pcm); -if (!card->dev->dma_mask) - card->dev->dma_mask = &psc_dma_dmamask; -if (!card->dev->coherent_dma_mask) - card->dev->coherent_dma_mask =DMA_BIT_MASK (32 ); + rc =dma_coerce_mask_and_coherent (card->dev,DMA_BIT_MASK (32 )); +if (rc) +return rc;if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK ].substream) { rc = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, pcm->card->dev,
sound/soc/jz4740/jz4740-pcm.c +4 -8
@@ -297,19 +297,15 @@ static void jz4740_pcm_free(struct snd_pcm *pcm) } } -static u64 jz4740_pcm_dmamask =DMA_BIT_MASK (32 ); -static int jz4740_pcm_new (struct snd_soc_pcm_runtime *rtd) {struct snd_card *card = rtd->card->snd_card;struct snd_pcm *pcm = rtd->pcm; -int ret =0 ; - -if (!card->dev->dma_mask) - card->dev->dma_mask = &jz4740_pcm_dmamask; +int ret; -if (!card->dev->coherent_dma_mask) - card->dev->coherent_dma_mask =DMA_BIT_MASK (32 ); + ret =dma_coerce_mask_and_coherent (card->dev,DMA_BIT_MASK (32 )); +if (ret) +return ret;if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK ].substream) { ret = jz4740_pcm_preallocate_dma_buffer(pcm,
sound/soc/kirkwood/kirkwood-dma.c +3 -6
@@ -59,8 +59,6 @@ static struct snd_pcm_hardware kirkwood_dma_snd_hw = { .fifo_size = 0, }; -static u64 kirkwood_dma_dmamask =DMA_BIT_MASK (32 ); -static irqreturn_t kirkwood_dma_irq (int irq,void *dev_id) {struct kirkwood_dma_priv *prdata = dev_id;
@@ -324,10 +322,9 @@ static int kirkwood_dma_new(struct snd_soc_pcm_runtime *rtd)struct snd_pcm *pcm = rtd->pcm;int ret; -if (!card->dev->dma_mask) - card->dev->dma_mask = &kirkwood_dma_dmamask; -if (!card->dev->coherent_dma_mask) - card->dev->coherent_dma_mask =DMA_BIT_MASK (32 ); + ret =dma_coerce_mask_and_coherent (card->dev,DMA_BIT_MASK (32 )); +if (ret) +return ret;if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK ].substream) { ret = kirkwood_dma_preallocate_dma_buffer(pcm,
sound/soc/nuc900/nuc900-pcm.c +4 -5
@@ -314,16 +314,15 @@ static void nuc900_dma_free_dma_buffers(struct snd_pcm *pcm)snd_pcm_lib_preallocate_free_for_all (pcm); } -static u64 nuc900_pcm_dmamask =DMA_BIT_MASK (32 );static int nuc900_dma_new (struct snd_soc_pcm_runtime *rtd) {struct snd_card *card = rtd->card->snd_card;struct snd_pcm *pcm = rtd->pcm; +int ret; -if (!card->dev->dma_mask) - card->dev->dma_mask = &nuc900_pcm_dmamask; -if (!card->dev->coherent_dma_mask) - card->dev->coherent_dma_mask =DMA_BIT_MASK (32 ); + ret =dma_coerce_mask_and_coherent (card->dev,DMA_BIT_MASK (32 )); +if (ret) +return ret;snd_pcm_lib_preallocate_pages_for_all (pcm,SNDRV_DMA_TYPE_DEV , card->dev,4 *1024 , (4 *1024 ) -1 );
sound/soc/omap/omap-pcm.c +4 -7
@@ -156,8 +156,6 @@ static struct snd_pcm_ops omap_pcm_ops = { .mmap = omap_pcm_mmap, }; -static u64 omap_pcm_dmamask =DMA_BIT_MASK (64 ); -static int omap_pcm_preallocate_dma_buffer (struct snd_pcm *pcm,int stream) {
@@ -202,12 +200,11 @@ static int omap_pcm_new(struct snd_soc_pcm_runtime *rtd) {struct snd_card *card = rtd->card->snd_card;struct snd_pcm *pcm = rtd->pcm; -int ret =0 ; +int ret; -if (!card->dev->dma_mask) - card->dev->dma_mask = &omap_pcm_dmamask; -if (!card->dev->coherent_dma_mask) - card->dev->coherent_dma_mask =DMA_BIT_MASK (64 ); + ret =dma_coerce_mask_and_coherent (card->dev,DMA_BIT_MASK (64 )); +if (ret) +return ret;if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK ].substream) { ret = omap_pcm_preallocate_dma_buffer(pcm,
sound/soc/pxa/pxa2xx-pcm.c +4 -7
@@ -84,18 +84,15 @@ static struct snd_pcm_ops pxa2xx_pcm_ops = { .mmap = pxa2xx_pcm_mmap, }; -static u64 pxa2xx_pcm_dmamask =DMA_BIT_MASK (32 ); -static int pxa2xx_soc_pcm_new (struct snd_soc_pcm_runtime *rtd) {struct snd_card *card = rtd->card->snd_card;struct snd_pcm *pcm = rtd->pcm; -int ret =0 ; +int ret; -if (!card->dev->dma_mask) - card->dev->dma_mask = &pxa2xx_pcm_dmamask; -if (!card->dev->coherent_dma_mask) - card->dev->coherent_dma_mask =DMA_BIT_MASK (32 ); + ret =dma_coerce_mask_and_coherent (card->dev,DMA_BIT_MASK (32 )); +if (ret) +return ret;if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK ].substream) { ret = pxa2xx_pcm_preallocate_dma_buffer(pcm,
sound/soc/s6000/s6000-pcm.c +3 -6
@@ -444,8 +444,6 @@ static void s6000_pcm_free(struct snd_pcm *pcm)snd_pcm_lib_preallocate_free_for_all (pcm); } -static u64 s6000_pcm_dmamask =DMA_BIT_MASK (32 ); -static int s6000_pcm_new (struct snd_soc_pcm_runtime *runtime) {struct snd_card *card = runtime->card->snd_card;
@@ -456,10 +454,9 @@ static int s6000_pcm_new(struct snd_soc_pcm_runtime *runtime) params =snd_soc_dai_get_dma_data (runtime->cpu_dai, pcm->streams[SNDRV_PCM_STREAM_PLAYBACK ].substream); -if (!card->dev->dma_mask) - card->dev->dma_mask = &s6000_pcm_dmamask; -if (!card->dev->coherent_dma_mask) - card->dev->coherent_dma_mask =DMA_BIT_MASK (32 ); + res =dma_coerce_mask_and_coherent (card->dev,DMA_BIT_MASK (32 )); +if (res) +return res;if (params->dma_in) { s6dmac_disable_chan(DMA_MASK_DMAC(params->dma_in),
sound/soc/samsung/dma.c +4 -7
@@ -395,20 +395,17 @@ static void dma_free_dma_buffers(struct snd_pcm *pcm) } } -static u64 dma_mask =DMA_BIT_MASK (32 ); -static int dma_new (struct snd_soc_pcm_runtime *rtd) {struct snd_card *card = rtd->card->snd_card;struct snd_pcm *pcm = rtd->pcm; -int ret =0 ; +int ret;pr_debug ("Entered %s\n" , __func__); -if (!card->dev->dma_mask) - card->dev->dma_mask = &dma_mask; -if (!card->dev->coherent_dma_mask) - card->dev->coherent_dma_mask =DMA_BIT_MASK (32 ); + ret =dma_coerce_mask_and_coherent (card->dev,DMA_BIT_MASK (32 )); +if (ret) +return ret;if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK ].substream) { ret = preallocate_dma_buffer(pcm,
sound/soc/samsung/idma.c +4 -7
@@ -383,18 +383,15 @@ static int preallocate_idma_buffer(struct snd_pcm *pcm, int stream)return 0 ; } -static u64 idma_mask =DMA_BIT_MASK (32 ); -static int idma_new (struct snd_soc_pcm_runtime *rtd) {struct snd_card *card = rtd->card->snd_card;struct snd_pcm *pcm = rtd->pcm; -int ret =0 ; +int ret; -if (!card->dev->dma_mask) - card->dev->dma_mask = &idma_mask; -if (!card->dev->coherent_dma_mask) - card->dev->coherent_dma_mask =DMA_BIT_MASK (32 ); + ret =dma_coerce_mask_and_coherent (card->dev,DMA_BIT_MASK (32 )); +if (ret) +return ret;if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK ].substream) { ret = preallocate_idma_buffer(pcm,
Signature · 1 line
1.7.4.4
RFC PATCH 29/51 DMA-API: ata: pata_octeon_cf: convert to use dma_coerce_mask_and_coherent()
In reply to Russell King - ARM LinuxConvert this code sequence:
pdev->dev.coherent_dma_mask = DMA_BIT_MASK(64); pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
to use dma_coerce_mask_and_coherent() to avoid bypassing the architecture check on the DMA mask.
--- drivers/ata/pata_octeon_cf.c | 5 +++-- 1 files changed, 3 insertions(+), 2 deletions(-)
drivers/ata/pata_octeon_cf.c +3 -2
@@ -1014,8 +1014,9 @@ static int octeon_cf_probe(struct platform_device *pdev) } cf_port->c0 = ap->ioaddr.ctl_addr; - pdev->dev.coherent_dma_mask =DMA_BIT_MASK (64 ); - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + rv =dma_coerce_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (64 )); +if (rv) +return ret;ata_port_desc (ap,"cmd %p ctl %p" , base, ap->ioaddr.ctl_addr);
Signature · 1 line
1.7.4.4
RFC PATCH 30/51 DMA-API: dma: dw_dmac.c: convert to use dma_coerce_mask_and_coherent()
In reply to Russell King - ARM LinuxThis code sequence:
if (!pdev->dev.dma_mask) {
pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
}bypasses the architectures check on the DMA mask. It can be replaced with dma_coerce_mask_and_coherent(), avoiding the direct initialization of this mask.
--- drivers/dma/dw/platform.c | 8 +++----- 1 files changed, 3 insertions(+), 5 deletions(-)
drivers/dma/dw/platform.c +3 -5
@@ -191,11 +191,9 @@ static int dw_probe(struct platform_device *pdev)if (IS_ERR (chip->regs))return PTR_ERR (chip->regs); -/* Apply default dma_mask if needed */ -if (!dev->dma_mask) { - dev->dma_mask = &dev->coherent_dma_mask; - dev->coherent_dma_mask =DMA_BIT_MASK (32 ); - } + err =dma_coerce_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (32 )); +if (err) +return err; pdata =dev_get_platdata (dev);if (!pdata)
Signature · 1 line
1.7.4.4
RFC PATCH 31/51 DMA-API: media: omap3isp: use dma_coerce_mask_and_coherent()
In reply to Russell King - ARM LinuxThe code sequence:
isp->raw_dmamask = DMA_BIT_MASK(32); isp->dev->dma_mask = &isp->raw_dmamask; isp->dev->coherent_dma_mask = DMA_BIT_MASK(32);
bypasses the architectures check on the DMA mask. It can be replaced with dma_coerce_mask_and_coherent(), avoiding the direct initialization of this mask.
--- drivers/media/platform/omap3isp/isp.c | 6 +++--- drivers/media/platform/omap3isp/isp.h | 3 --- 2 files changed, 3 insertions(+), 6 deletions(-)
drivers/media/platform/omap3isp/isp.c +3 -3
@@ -2182,9 +2182,9 @@ static int isp_probe(struct platform_device *pdev) isp->pdata = pdata; isp->ref_count =0 ; - isp->raw_dmamask =DMA_BIT_MASK (32 ); - isp->dev->dma_mask = &isp->raw_dmamask; - isp->dev->coherent_dma_mask =DMA_BIT_MASK (32 ); + ret =dma_coerce_mask_and_coherent (isp->dev,DMA_BIT_MASK (32 )); +if (ret) +return ret;platform_set_drvdata (pdev, isp);
drivers/media/platform/omap3isp/isp.h +0 -3
@@ -152,7 +152,6 @@ struct isp_xclk {* @mmio_base_phys: Array with physical L4 bus addresses for ISP register * regions. * @mmio_size: Array with ISP register regions size in bytes. -* @raw_dmamask: Raw DMA mask * @stat_lock: Spinlock for handling statistics * @isp_mutex: Mutex for serializing requests to ISP. * @crashed: Bitmask of crashed entities (indexed by entity ID)
@@ -190,8 +189,6 @@ struct isp_device {unsigned long mmio_base_phys[OMAP3_ISP_IOMEM_LAST ];resource_size_t mmio_size[OMAP3_ISP_IOMEM_LAST ]; -u64 raw_dmamask; -/* ISP Obj */ spinlock_t stat_lock;/* common lock for statistic drivers */ struct mutex isp_mutex;/* For handling ref_count field */
Signature · 1 line
1.7.4.4
RFC PATCH 32/51 DMA-API: mmc: sdhci-acpi: use dma_coerce_mask_and_coherent()
In reply to Russell King - ARM LinuxThe code sequence:
dev->dma_mask = &dev->coherent_dma_mask; dev->coherent_dma_mask = dma_mask;
bypasses the architectures check on the DMA mask. It can be replaced with dma_coerce_mask_and_coherent(), avoiding the direct initialization of this mask.
--- drivers/mmc/host/sdhci-acpi.c | 5 +++-- 1 files changed, 3 insertions(+), 2 deletions(-)
drivers/mmc/host/sdhci-acpi.c +3 -2
@@ -310,8 +310,9 @@ static int sdhci_acpi_probe(struct platform_device *pdev) dma_mask =DMA_BIT_MASK (32 ); } - dev->dma_mask = &dev->coherent_dma_mask; - dev->coherent_dma_mask = dma_mask; + err =dma_coerce_mask_and_coherent (dev, dma_mask); +if (err) + goto err_free; }if (c->slot) {
Signature · 1 line
1.7.4.4
RFC PATCH 33/51 DMA-API: net: nxp/lpc_eth: use dma_coerce_mask_and_coherent()
In reply to Russell King - ARM LinuxThe code sequence:
pldat->pdev->dev.coherent_dma_mask = 0xFFFFFFFF; pldat->pdev->dev.dma_mask = &pldat->pdev->dev.coherent_dma_mask;
bypasses the architectures check on the DMA mask. It can be replaced with dma_coerce_mask_and_coherent(), avoiding the direct initialization of this mask.
--- drivers/net/ethernet/nxp/lpc_eth.c | 6 ++++-- 1 files changed, 4 insertions(+), 2 deletions(-)
drivers/net/ethernet/nxp/lpc_eth.c +4 -2
@@ -1399,8 +1399,10 @@ static int lpc_eth_drv_probe(struct platform_device *pdev) }if (pldat->dma_buff_base_v ==0 ) { - pldat->pdev->dev.coherent_dma_mask =0xFFFFFFFF ; - pldat->pdev->dev.dma_mask = &pldat->pdev->dev.coherent_dma_mask; + ret =dma_coerce_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (32 )); +if (ret) + goto err_out_free_irq; + pldat->dma_buff_size =PAGE_ALIGN (pldat->dma_buff_size);/* Allocate a chunk of memory for the DMA ethernet buffers
Signature · 1 line
1.7.4.4
RFC PATCH 34/51 DMA-API: net: octeon: use dma_coerce_mask_and_coherent()
In reply to Russell King - ARM LinuxThe code sequence:
pdev->dev.coherent_dma_mask = DMA_BIT_MASK(64); pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
bypasses the architectures check on the DMA mask. It can be replaced with dma_coerce_mask_and_coherent(), avoiding the direct initialization of this mask.
--- drivers/net/ethernet/octeon/octeon_mgmt.c | 5 +++-- 1 files changed, 3 insertions(+), 2 deletions(-)
drivers/net/ethernet/octeon/octeon_mgmt.c +3 -2
@@ -1552,8 +1552,9 @@ static int octeon_mgmt_probe(struct platform_device *pdev) p->phy_np =of_parse_phandle (pdev->dev.of_node,"phy-handle" ,0 ); - pdev->dev.coherent_dma_mask =DMA_BIT_MASK (64 ); - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + result =dma_coerce_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (64 )); +if (result) + goto err;netif_carrier_off (netdev); result =register_netdev (netdev);
Signature · 1 line
1.7.4.4
RFC PATCH 35/51 DMA-API: parport: parport_pc.c: use dma_coerce_mask_and_coherent()
In reply to Russell King - ARM LinuxThe code sequence:
dev->coherent_dma_mask = DMA_BIT_MASK(24); dev->dma_mask = &dev->coherent_dma_mask;
bypasses the architectures check on the DMA mask. It can be replaced with dma_coerce_mask_and_coherent(), avoiding the direct initialization of this mask.
--- drivers/parport/parport_pc.c | 8 ++++++-- 1 files changed, 6 insertions(+), 2 deletions(-)
drivers/parport/parport_pc.c +6 -2
@@ -2004,6 +2004,7 @@ struct parport *parport_pc_probe_port(unsigned long int base,struct resource *ECR_res =NULL ;struct resource *EPP_res =NULL ;struct platform_device *pdev =NULL ; +int ret;if (!dev) {/* We need a physical device to attach to, but none was
@@ -2014,8 +2015,11 @@ struct parport *parport_pc_probe_port(unsigned long int base,return NULL ; dev = &pdev->dev; - dev->coherent_dma_mask =DMA_BIT_MASK (24 ); - dev->dma_mask = &dev->coherent_dma_mask; + ret =dma_coerce_mask_and_coherent (dev,DMA_BIT_MASK (24 )); +if (ret) { +dev_err (dev,"Unable to set coherent dma mask: disabling DMA\n" ); + dma =PARPORT_DMA_NONE ; + } } ops =kmalloc (sizeof (struct parport_operations ),GFP_KERNEL );
Signature · 1 line
1.7.4.4
RFC PATCH 36/51 DMA-API: usb: use dma_set_coherent_mask()
In reply to Russell King - ARM LinuxThe correct way for a driver to specify the coherent DMA mask is not to directly access the field in the struct device, but to use dma_set_coherent_mask(). Only arch and bus code should access this member directly.
Convert all direct write accesses to using the correct API.
--- drivers/usb/chipidea/ci_hdrc_imx.c | 5 +++-- drivers/usb/dwc3/dwc3-exynos.c | 5 +++-- drivers/usb/gadget/lpc32xx_udc.c | 4 +++- drivers/usb/host/ehci-atmel.c | 5 +++-- drivers/usb/host/ehci-octeon.c | 4 +++- drivers/usb/host/ehci-omap.c | 8 +++++--- drivers/usb/host/ehci-orion.c | 5 +++-- drivers/usb/host/ehci-platform.c | 7 ++++--- drivers/usb/host/ehci-s5p.c | 5 +++-- drivers/usb/host/ehci-spear.c | 5 +++-- drivers/usb/host/ehci-tegra.c | 5 +++-- drivers/usb/host/ohci-at91.c | 7 ++++--- drivers/usb/host/ohci-exynos.c | 5 +++-- drivers/usb/host/ohci-nxp.c | 4 +++- drivers/usb/host/ohci-octeon.c | 4 +++- drivers/usb/host/ohci-omap3.c | 8 +++++--- drivers/usb/host/ohci-pxa27x.c | 6 ++++-- drivers/usb/host/ohci-spear.c | 5 +++-- drivers/usb/host/uhci-platform.c | 5 +++-- 19 files changed, 64 insertions(+), 38 deletions(-)
drivers/usb/chipidea/ci_hdrc_imx.c +3 -2
@@ -159,8 +159,9 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)if (!pdev->dev.dma_mask) pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; -if (!pdev->dev.coherent_dma_mask) - pdev->dev.coherent_dma_mask =DMA_BIT_MASK (32 ); + ret =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (32 )); +if (ret) + goto err;if (usbmisc_ops && usbmisc_ops->init) { ret = usbmisc_ops->init (&pdev->dev);
drivers/usb/dwc3/dwc3-exynos.c +3 -2
@@ -117,8 +117,9 @@ static int dwc3_exynos_probe(struct platform_device *pdev)*/ if (!dev->dma_mask) dev->dma_mask = &dev->coherent_dma_mask; -if (!dev->coherent_dma_mask) - dev->coherent_dma_mask =DMA_BIT_MASK (32 ); + ret =dma_set_coherent_mask (dev,DMA_BIT_MASK (32 )); +if (ret) + goto err1;platform_set_drvdata (pdev, exynos);
drivers/usb/gadget/lpc32xx_udc.c +3 -1
@@ -3078,7 +3078,9 @@ static int __init lpc32xx_udc_probe(struct platform_device *pdev) udc->isp1301_i2c_client->addr); pdev->dev.dma_mask = &lpc32xx_usbd_dmamask; - pdev->dev.coherent_dma_mask =DMA_BIT_MASK (32 ); + retval =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (32 )); +if (retval) + goto resource_fail; udc->board = &lpc32xx_usbddata;
drivers/usb/host/ehci-atmel.c +3 -2
@@ -92,8 +92,9 @@ static int ehci_atmel_drv_probe(struct platform_device *pdev)*/ if (!pdev->dev.dma_mask) pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; -if (!pdev->dev.coherent_dma_mask) - pdev->dev.coherent_dma_mask =DMA_BIT_MASK (32 ); + retval =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (32 )); +if (retval) + goto fail_create_hcd; hcd =usb_create_hcd (driver, &pdev->dev,dev_name (&pdev->dev));if (!hcd) {
drivers/usb/host/ehci-octeon.c +3 -1
@@ -116,8 +116,10 @@ static int ehci_octeon_drv_probe(struct platform_device *pdev)* We can DMA from anywhere. But the descriptors must be in * the lower 4GB. */ - pdev->dev.coherent_dma_mask =DMA_BIT_MASK (32 ); pdev->dev.dma_mask = &ehci_octeon_dma_mask; + ret =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (32 )); +if (ret) +return ret; hcd =usb_create_hcd (&ehci_octeon_hc_driver, &pdev->dev,"octeon" );if (!hcd)
drivers/usb/host/ehci-omap.c +5 -3
@@ -104,7 +104,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)struct resource *res;struct usb_hcd *hcd;void __iomem *regs; -int ret = -ENODEV ; +int ret;int irq;int i;struct omap_hcd *omap;
@@ -146,9 +146,11 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)*/ if (!dev->dma_mask) dev->dma_mask = &dev->coherent_dma_mask; -if (!dev->coherent_dma_mask) - dev->coherent_dma_mask =DMA_BIT_MASK (32 ); + ret =dma_set_coherent_mask (dev,DMA_BIT_MASK (32 )); +if (ret) +return ret; + ret = -ENODEV ; hcd =usb_create_hcd (&ehci_omap_hc_driver, dev,dev_name (dev));if (!hcd) {
drivers/usb/host/ehci-orion.c +3 -2
@@ -182,8 +182,9 @@ static int ehci_orion_drv_probe(struct platform_device *pdev)*/ if (!pdev->dev.dma_mask) pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; -if (!pdev->dev.coherent_dma_mask) - pdev->dev.coherent_dma_mask =DMA_BIT_MASK (32 ); + err =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (32 )); +if (err) + goto err1;if (!request_mem_region (res->start,resource_size (res), ehci_orion_hc_driver.description)) {
drivers/usb/host/ehci-platform.c +4 -3
@@ -78,7 +78,7 @@ static int ehci_platform_probe(struct platform_device *dev)struct resource *res_mem;struct usb_ehci_pdata *pdata;int irq; -int err = -ENOMEM ; +int err;if (usb_disabled ())return -ENODEV ;
@@ -91,8 +91,9 @@ static int ehci_platform_probe(struct platform_device *dev) dev->dev.platform_data = &ehci_platform_defaults;if (!dev->dev.dma_mask) dev->dev.dma_mask = &dev->dev.coherent_dma_mask; -if (!dev->dev.coherent_dma_mask) - dev->dev.coherent_dma_mask =DMA_BIT_MASK (32 ); + err =dma_set_coherent_mask (&dev->dev,DMA_BIT_MASK (32 )); +if (err) +return err; pdata = dev->dev.platform_data;
drivers/usb/host/ehci-s5p.c +3 -2
@@ -91,8 +91,9 @@ static int s5p_ehci_probe(struct platform_device *pdev)*/ if (!pdev->dev.dma_mask) pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; -if (!pdev->dev.coherent_dma_mask) - pdev->dev.coherent_dma_mask =DMA_BIT_MASK (32 ); + err =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (32 )); +if (err) +return err;s5p_setup_vbus_gpio (pdev);
drivers/usb/host/ehci-spear.c +3 -2
@@ -83,8 +83,9 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev)*/ if (!pdev->dev.dma_mask) pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; -if (!pdev->dev.coherent_dma_mask) - pdev->dev.coherent_dma_mask =DMA_BIT_MASK (32 ); + retval =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (32 )); +if (retval) + goto fail; usbh_clk =devm_clk_get (&pdev->dev,NULL );if (IS_ERR (usbh_clk)) {
drivers/usb/host/ehci-tegra.c +3 -2
@@ -373,8 +373,9 @@ static int tegra_ehci_probe(struct platform_device *pdev)*/ if (!pdev->dev.dma_mask) pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; -if (!pdev->dev.coherent_dma_mask) - pdev->dev.coherent_dma_mask =DMA_BIT_MASK (32 ); + err =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (32 )); +if (err) +return err;setup_vbus_gpio (pdev, pdata);
drivers/usb/host/ohci-at91.c +4 -3
@@ -507,7 +507,7 @@ MODULE_DEVICE_TABLE(of, at91_ohci_dt_ids);static int ohci_at91_of_init (struct platform_device *pdev) {struct device_node *np = pdev->dev.of_node; -int i, gpio; +int i, gpio, ret;enum of_gpio_flags flags;struct at91_usbh_data *pdata;u32 ports;
@@ -521,8 +521,9 @@ static int ohci_at91_of_init(struct platform_device *pdev)*/ if (!pdev->dev.dma_mask) pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; -if (!pdev->dev.coherent_dma_mask) - pdev->dev.coherent_dma_mask =DMA_BIT_MASK (32 ); + ret =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (32 )); +if (ret) +return ret; pdata =devm_kzalloc (&pdev->dev,sizeof (*pdata),GFP_KERNEL );if (!pdata)
drivers/usb/host/ohci-exynos.c +3 -2
@@ -116,8 +116,9 @@ static int exynos_ohci_probe(struct platform_device *pdev)*/ if (!pdev->dev.dma_mask) pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; -if (!pdev->dev.coherent_dma_mask) - pdev->dev.coherent_dma_mask =DMA_BIT_MASK (32 ); + err =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (32 )); +if (err) +return err; exynos_ohci =devm_kzalloc (&pdev->dev,sizeof (struct exynos_ohci_hcd ),GFP_KERNEL );
drivers/usb/host/ohci-nxp.c +3 -1
@@ -226,8 +226,10 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)return -EPROBE_DEFER ; } - pdev->dev.coherent_dma_mask =DMA_BIT_MASK (32 ); pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + ret =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (32 )); +if (ret) + goto fail_disable;dev_dbg (&pdev->dev,"%s: " DRIVER_DESC " (nxp)\n" , hcd_name);if (usb_disabled ()) {
drivers/usb/host/ohci-octeon.c +3 -1
@@ -127,8 +127,10 @@ static int ohci_octeon_drv_probe(struct platform_device *pdev) }/* Ohci is a 32-bit device. */ - pdev->dev.coherent_dma_mask =DMA_BIT_MASK (32 ); pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + ret =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (32 )); +if (ret) +return ret; hcd =usb_create_hcd (&ohci_octeon_hc_driver, &pdev->dev,"octeon" );if (!hcd)
drivers/usb/host/ohci-omap3.c +5 -3
@@ -132,7 +132,7 @@ static int ohci_hcd_omap3_probe(struct platform_device *pdev)struct usb_hcd *hcd =NULL ;void __iomem *regs =NULL ;struct resource *res; -int ret = -ENODEV ; +int ret;int irq;if (usb_disabled ())
@@ -168,9 +168,11 @@ static int ohci_hcd_omap3_probe(struct platform_device *pdev)*/ if (!dev->dma_mask) dev->dma_mask = &dev->coherent_dma_mask; -if (!dev->coherent_dma_mask) - dev->coherent_dma_mask =DMA_BIT_MASK (32 ); + ret =dma_set_coherent_mask (dev,DMA_BIT_MASK (32 )); +if (ret) + goto err_io; + ret = -ENODEV ; hcd =usb_create_hcd (&ohci_omap3_hc_driver, dev,dev_name (dev));if (!hcd) {
drivers/usb/host/ohci-pxa27x.c +4 -2
@@ -287,6 +287,7 @@ static int ohci_pxa_of_init(struct platform_device *pdev)struct device_node *np = pdev->dev.of_node;struct pxaohci_platform_data *pdata;u32 tmp; +int ret;if (!np)return 0 ;
@@ -297,8 +298,9 @@ static int ohci_pxa_of_init(struct platform_device *pdev)*/ if (!pdev->dev.dma_mask) pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; -if (!pdev->dev.coherent_dma_mask) - pdev->dev.coherent_dma_mask =DMA_BIT_MASK (32 ); + ret =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (32 )); +if (ret) +return ret; pdata =devm_kzalloc (&pdev->dev,sizeof (*pdata),GFP_KERNEL );if (!pdata)
drivers/usb/host/ohci-spear.c +3 -2
@@ -113,8 +113,9 @@ static int spear_ohci_hcd_drv_probe(struct platform_device *pdev)*/ if (!pdev->dev.dma_mask) pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; -if (!pdev->dev.coherent_dma_mask) - pdev->dev.coherent_dma_mask =DMA_BIT_MASK (32 ); + retval =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (32 )); +if (retval) + goto fail; usbh_clk =devm_clk_get (&pdev->dev,NULL );if (IS_ERR (usbh_clk)) {
drivers/usb/host/uhci-platform.c +3 -2
@@ -77,8 +77,9 @@ static int uhci_hcd_platform_probe(struct platform_device *pdev)*/ if (!pdev->dev.dma_mask) pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; -if (!pdev->dev.coherent_dma_mask) - pdev->dev.coherent_dma_mask =DMA_BIT_MASK (32 ); + ret =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (32 )); +if (ret) +return ret; hcd =usb_create_hcd (&uhci_platform_hc_driver, &pdev->dev, pdev->name);
Signature · 1 line
1.7.4.4
RFC PATCH 37/51 DMA-API: usb: use new dma_coerce_mask_and_coherent()
In reply to Russell King - ARM Linux--- drivers/usb/chipidea/ci_hdrc_imx.c | 4 +--- drivers/usb/dwc3/dwc3-exynos.c | 4 +--- drivers/usb/host/ehci-atmel.c | 4 +--- drivers/usb/host/ehci-omap.c | 4 +--- drivers/usb/host/ehci-orion.c | 4 +--- drivers/usb/host/ehci-platform.c | 5 ++--- drivers/usb/host/ehci-s5p.c | 4 +--- drivers/usb/host/ehci-spear.c | 4 +--- drivers/usb/host/ehci-tegra.c | 4 +--- drivers/usb/host/ohci-at91.c | 4 +--- drivers/usb/host/ohci-exynos.c | 4 +--- drivers/usb/host/ohci-nxp.c | 3 +-- drivers/usb/host/ohci-octeon.c | 3 +-- drivers/usb/host/ohci-omap3.c | 4 +--- drivers/usb/host/ohci-pxa27x.c | 4 +--- drivers/usb/host/ohci-spear.c | 4 +--- drivers/usb/host/uhci-platform.c | 4 +--- 17 files changed, 18 insertions(+), 49 deletions(-)
drivers/usb/chipidea/ci_hdrc_imx.c +1 -3
@@ -157,9 +157,7 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) pdata.phy = data->phy; -if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - ret =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (32 )); + ret =dma_coerce_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (32 ));if (ret) goto err;
drivers/usb/dwc3/dwc3-exynos.c +1 -3
@@ -115,9 +115,7 @@ static int dwc3_exynos_probe(struct platform_device *pdev)* Since shared usb code relies on it, set it here for now. * Once we move to full device tree support this will vanish off. */ -if (!dev->dma_mask) - dev->dma_mask = &dev->coherent_dma_mask; - ret =dma_set_coherent_mask (dev,DMA_BIT_MASK (32 )); + ret =dma_coerce_mask_and_coherent (dev,DMA_BIT_MASK (32 ));if (ret) goto err1;
drivers/usb/host/ehci-atmel.c +1 -3
@@ -90,9 +90,7 @@ static int ehci_atmel_drv_probe(struct platform_device *pdev)* Since shared usb code relies on it, set it here for now. * Once we have dma capability bindings this can go away. */ -if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - retval =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (32 )); + retval =dma_coerce_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (32 ));if (retval) goto fail_create_hcd;
drivers/usb/host/ehci-omap.c +1 -3
@@ -144,9 +144,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)* Since shared usb code relies on it, set it here for now. * Once we have dma capability bindings this can go away. */ -if (!dev->dma_mask) - dev->dma_mask = &dev->coherent_dma_mask; - ret =dma_set_coherent_mask (dev,DMA_BIT_MASK (32 )); + ret =dma_coerce_mask_and_coherent (dev,DMA_BIT_MASK (32 ));if (ret)return ret;
drivers/usb/host/ehci-orion.c +1 -3
@@ -180,9 +180,7 @@ static int ehci_orion_drv_probe(struct platform_device *pdev)* set. Since shared usb code relies on it, set it here for * now. Once we have dma capability bindings this can go away. */ -if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - err =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (32 )); + err =dma_coerce_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (32 ));if (err) goto err1;
drivers/usb/host/ehci-platform.c +2 -3
@@ -89,9 +89,8 @@ static int ehci_platform_probe(struct platform_device *dev)*/ if (!dev->dev.platform_data) dev->dev.platform_data = &ehci_platform_defaults; -if (!dev->dev.dma_mask) - dev->dev.dma_mask = &dev->dev.coherent_dma_mask; - err =dma_set_coherent_mask (&dev->dev,DMA_BIT_MASK (32 )); + + err =dma_coerce_mask_and_coherent (&dev->dev,DMA_BIT_MASK (32 ));if (err)return err;
drivers/usb/host/ehci-s5p.c +1 -3
@@ -89,9 +89,7 @@ static int s5p_ehci_probe(struct platform_device *pdev)* Since shared usb code relies on it, set it here for now. * Once we move to full device tree support this will vanish off. */ -if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - err =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (32 )); + err =dma_coerce_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (32 ));if (err)return err;
drivers/usb/host/ehci-spear.c +1 -3
@@ -81,9 +81,7 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev)* Since shared usb code relies on it, set it here for now. * Once we have dma capability bindings this can go away. */ -if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - retval =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (32 )); + retval =dma_coerce_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (32 ));if (retval) goto fail;
drivers/usb/host/ehci-tegra.c +1 -3
@@ -371,9 +371,7 @@ static int tegra_ehci_probe(struct platform_device *pdev)* Since shared usb code relies on it, set it here for now. * Once we have dma capability bindings this can go away. */ -if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - err =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (32 )); + err =dma_coerce_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (32 ));if (err)return err;
drivers/usb/host/ohci-at91.c +1 -3
@@ -519,9 +519,7 @@ static int ohci_at91_of_init(struct platform_device *pdev)* Since shared usb code relies on it, set it here for now. * Once we have dma capability bindings this can go away. */ -if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - ret =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (32 )); + ret =dma_coerce_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (32 ));if (ret)return ret;
drivers/usb/host/ohci-exynos.c +1 -3
@@ -114,9 +114,7 @@ static int exynos_ohci_probe(struct platform_device *pdev)* Since shared usb code relies on it, set it here for now. * Once we move to full device tree support this will vanish off. */ -if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - err =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (32 )); + err =dma_coerce_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (32 ));if (err)return err;
drivers/usb/host/ohci-nxp.c +1 -2
@@ -226,8 +226,7 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)return -EPROBE_DEFER ; } - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - ret =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (32 )); + ret =dma_coerce_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (32 ));if (ret) goto fail_disable;
drivers/usb/host/ohci-octeon.c +1 -2
@@ -127,8 +127,7 @@ static int ohci_octeon_drv_probe(struct platform_device *pdev) }/* Ohci is a 32-bit device. */ - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - ret =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (32 )); + ret =dma_coerce_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (32 ));if (ret)return ret;
drivers/usb/host/ohci-omap3.c +1 -3
@@ -166,9 +166,7 @@ static int ohci_hcd_omap3_probe(struct platform_device *pdev)* Since shared usb code relies on it, set it here for now. * Once we have dma capability bindings this can go away. */ -if (!dev->dma_mask) - dev->dma_mask = &dev->coherent_dma_mask; - ret =dma_set_coherent_mask (dev,DMA_BIT_MASK (32 )); + ret =dma_coerce_mask_and_coherent (dev,DMA_BIT_MASK (32 ));if (ret) goto err_io;
drivers/usb/host/ohci-pxa27x.c +1 -3
@@ -296,9 +296,7 @@ static int ohci_pxa_of_init(struct platform_device *pdev)* Since shared usb code relies on it, set it here for now. * Once we have dma capability bindings this can go away. */ -if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - ret =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (32 )); + ret =dma_coerce_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (32 ));if (ret)return ret;
drivers/usb/host/ohci-spear.c +1 -3
@@ -111,9 +111,7 @@ static int spear_ohci_hcd_drv_probe(struct platform_device *pdev)* Since shared usb code relies on it, set it here for now. * Once we have dma capability bindings this can go away. */ -if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - retval =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (32 )); + retval =dma_coerce_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (32 ));if (retval) goto fail;
drivers/usb/host/uhci-platform.c +1 -3
@@ -75,9 +75,7 @@ static int uhci_hcd_platform_probe(struct platform_device *pdev)* Since shared usb code relies on it, set it here for now. * Once we have dma capability bindings this can go away. */ -if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - ret =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (32 )); + ret =dma_coerce_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (32 ));if (ret)return ret;
Signature · 1 line
1.7.4.4
RFC PATCH 38/51 DMA-API: staging: use dma_set_coherent_mask()
In reply to Russell King - ARM LinuxThe correct way for a driver to specify the coherent DMA mask is not to directly access the field in the struct device, but to use dma_set_coherent_mask(). Only arch and bus code should access this member directly.
Convert all direct write accesses to using the correct API.
--- drivers/staging/dwc2/platform.c | 5 +++-- drivers/staging/imx-drm/imx-drm-core.c | 8 ++++++-- drivers/staging/imx-drm/ipuv3-crtc.c | 4 +++- 3 files changed, 12 insertions(+), 5 deletions(-)
drivers/staging/dwc2/platform.c +3 -2
@@ -100,8 +100,9 @@ static int dwc2_driver_probe(struct platform_device *dev)*/ if (!dev->dev.dma_mask) dev->dev.dma_mask = &dev->dev.coherent_dma_mask; -if (!dev->dev.coherent_dma_mask) - dev->dev.coherent_dma_mask =DMA_BIT_MASK (32 ); + retval =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (32 )); +if (retval) +return retval; irq =platform_get_irq (dev,0 );if (irq <0 ) {
drivers/staging/imx-drm/imx-drm-core.c +6 -2
@@ -815,6 +815,12 @@ static struct drm_driver imx_drm_driver = {static int imx_drm_platform_probe (struct platform_device *pdev) { +int ret; + + ret =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (32 )); +if (ret) +return ret; + imx_drm_device->dev = &pdev->dev;return drm_platform_init (&imx_drm_driver, pdev);
@@ -857,8 +863,6 @@ static int __init imx_drm_init(void) goto err_pdev; } - imx_drm_pdev->dev.coherent_dma_mask =DMA_BIT_MASK (32 ), - ret =platform_driver_register (&imx_drm_pdrv);if (ret) goto err_pdrv;
drivers/staging/imx-drm/ipuv3-crtc.c +3 -1
@@ -522,7 +522,9 @@ static int ipu_drm_probe(struct platform_device *pdev)if (!pdata)return -EINVAL ; - pdev->dev.coherent_dma_mask =DMA_BIT_MASK (32 ); + ret =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (32 )); +if (ret) +return ret; ipu_crtc =devm_kzalloc (&pdev->dev,sizeof (*ipu_crtc),GFP_KERNEL );if (!ipu_crtc)
Signature · 1 line
1.7.4.4
RFC PATCH 39/51 DMA-API: others: use dma_set_coherent_mask()
In reply to Russell King - ARM LinuxThe correct way for a driver to specify the coherent DMA mask is not to directly access the field in the struct device, but to use dma_set_coherent_mask(). Only arch and bus code should access this member directly.
Convert all direct write accesses to using the correct API.
--- drivers/ata/pata_ixp4xx_cf.c | 5 ++++- drivers/gpu/drm/exynos/exynos_drm_drv.c | 7 ++++++- drivers/gpu/drm/omapdrm/omap_dmm_tiler.c | 5 +++-- 3 files changed, 13 insertions(+), 4 deletions(-)
drivers/ata/pata_ixp4xx_cf.c +4 -1
@@ -144,6 +144,7 @@ static int ixp4xx_pata_probe(struct platform_device *pdev)struct ata_host *host;struct ata_port *ap;struct ixp4xx_pata_data *data = pdev->dev.platform_data; +int ret; cs0 =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); cs1 =platform_get_resource (pdev,IORESOURCE_MEM ,1 );
@@ -157,7 +158,9 @@ static int ixp4xx_pata_probe(struct platform_device *pdev)return -ENOMEM ;/* acquire resources and fill host */ - pdev->dev.coherent_dma_mask =DMA_BIT_MASK (32 ); + ret =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (32 )); +if (ret) +return ret; data->cs0 =devm_ioremap (&pdev->dev, cs0->start,0x1000 ); data->cs1 =devm_ioremap (&pdev->dev, cs1->start,0x1000 );
drivers/gpu/drm/exynos/exynos_drm_drv.c +6 -1
@@ -287,7 +287,12 @@ static struct drm_driver exynos_drm_driver = {static int exynos_drm_platform_probe (struct platform_device *pdev) { - pdev->dev.coherent_dma_mask =DMA_BIT_MASK (32 ); +int ret; + + ret =dma_set_coherent_mask (&pdev->dev,DMA_BIT_MASK (32 )); +if (ret) +return ret; + exynos_drm_driver.num_ioctls =DRM_ARRAY_SIZE (exynos_ioctls);return drm_platform_init (&exynos_drm_driver, pdev);
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c +3 -2
@@ -664,8 +664,9 @@ static int omap_dmm_probe(struct platform_device *dev) }/* set dma mask for device */ -/* NOTE: this is a workaround for the hwmod not initializing properly */ - dev->dev.coherent_dma_mask =DMA_BIT_MASK (32 ); + ret =dma_set_coherent_mask (&dev->dev,DMA_BIT_MASK (32 )); +if (ret) + goto fail; omap_dmm->dummy_pa =page_to_phys (omap_dmm->dummy_page);
Signature · 1 line
1.7.4.4
RFC PATCH 40/51 DMA-API: crypto: fix ixp4xx crypto platform device support
In reply to Russell King - ARM LinuxDon't statically allocate struct device's in modules, and shut the warning up with an empty release() function. There's a reason that warning is there and that's not for people to hide in this way. It's there to persuade people to use the correct APIs to allocate platform devices.
--- drivers/crypto/ixp4xx_crypto.c | 37 +++++++++++++++++-------------------- 1 files changed, 17 insertions(+), 20 deletions(-)
drivers/crypto/ixp4xx_crypto.c +17 -20
@@ -218,23 +218,10 @@ static dma_addr_t crypt_phys;static int support_aes =1 ; -static void dev_release (struct device *dev) -{ -return ; -} -#define DRIVER_NAME "ixp4xx_crypto" -static struct platform_device pseudo_dev = { - .name =DRIVER_NAME , - .id =0 , - .num_resources =0 , - .dev = { - .coherent_dma_mask =DMA_BIT_MASK (32 ), - .release = dev_release, - } -}; -static struct device *dev = &pseudo_dev.dev; +static struct platform_device *pdev; +static struct device *dev;static inline dma_addr_t crypt_virt2phys (struct crypt_ctl *virt) {
@@ -1418,20 +1405,30 @@ static struct ixp_alg ixp4xx_algos[] = { } };#define IXP_POSTFIX "-ixp4xx" + +static const struct platform_device_info ixp_dev_info__initdata = { + .name =DRIVER_NAME , + .id =0 , + .dma_mask =DMA_BIT_MASK (32 ), +}; +static int __init ixp_module_init (void ) {int num =ARRAY_SIZE (ixp4xx_algos); -int i,err ; +int i, err ; -if (platform_device_register (&pseudo_dev)) -return -ENODEV ; + pdev =platform_device_register_full (&ixp_dev_info); +if (IS_ERR (pdev)) +return PTR_ERR (pdev); + + dev = &pdev->dev;spin_lock_init (&desc_lock);spin_lock_init (&emerg_lock); err =init_ixp_crypto ();if (err) { -platform_device_unregister (&pseudo_dev); +platform_device_unregister (pdev);return err; }for (i=0 ; i< num; i++) {
@@ -1496,7 +1493,7 @@ static void __exit ixp_module_exit(void)crypto_unregister_alg (&ixp4xx_algos[i].crypto); }release_ixp_crypto (); -platform_device_unregister (&pseudo_dev); +platform_device_unregister (pdev); }module_init (ixp_module_init);
Signature · 1 line
1.7.4.4
RFC PATCH 41/51 DMA-API: crypto: remove last references to 'static struct device *dev'
In reply to Russell King - ARM Linux--- drivers/crypto/ixp4xx_crypto.c | 13 ++++++++----- 1 files changed, 8 insertions(+), 5 deletions(-)
drivers/crypto/ixp4xx_crypto.c +8 -5
@@ -221,7 +221,6 @@ static int support_aes = 1;#define DRIVER_NAME "ixp4xx_crypto"static struct platform_device *pdev; -static struct device *dev;static inline dma_addr_t crypt_virt2phys (struct crypt_ctl *virt) {
@@ -250,6 +249,7 @@ static inline const struct ix_hash_algo *ix_hash(struct crypto_tfm *tfm)static int setup_crypt_desc (void ) { +struct device *dev = &pdev->dev;BUILD_BUG_ON (sizeof (struct crypt_ctl ) !=64 ); crypt_virt = dma_alloc_coherent(dev, NPE_QLEN * sizeof(struct crypt_ctl),
@@ -350,6 +350,7 @@ static void finish_scattered_hmac(struct crypt_ctl *crypt)static void one_packet (dma_addr_t phys) { +struct device *dev = &pdev->dev;struct crypt_ctl *crypt;struct ixp_ctx *ctx;int failed;
@@ -419,7 +420,7 @@ static void crypto_done_action(unsigned long arg)tasklet_schedule (&crypto_done_tasklet); } -static int init_ixp_crypto (void ) +static int init_ixp_crypto (struct device *dev) {int ret = -ENODEV ;u32 msg[2 ] = {0 ,0 };
@@ -506,7 +507,7 @@ static int init_ixp_crypto(void)return ret; } -static void release_ixp_crypto (void ) +static void release_ixp_crypto (struct device *dev) {qmgr_disable_irq (RECV_QID );tasklet_kill (&crypto_done_tasklet);
@@ -873,6 +874,7 @@ static int ablk_perform(struct ablkcipher_request *req, int encrypt)enum dma_data_direction src_direction =DMA_BIDIRECTIONAL ;struct ablk_ctx *req_ctx =ablkcipher_request_ctx (req);struct buffer_desc src_hook; +struct device *dev = &pdev->dev;gfp_t flags = req->base.flags &CRYPTO_TFM_REQ_MAY_SLEEP ?GFP_KERNEL :GFP_ATOMIC ;
@@ -997,6 +999,7 @@ static int aead_perform(struct aead_request *req, int encrypt,unsigned int cryptlen;struct buffer_desc *buf, src_hook;struct aead_ctx *req_ctx =aead_request_ctx (req); +struct device *dev = &pdev->dev;gfp_t flags = req->base.flags &CRYPTO_TFM_REQ_MAY_SLEEP ?GFP_KERNEL :GFP_ATOMIC ;
@@ -1426,7 +1429,7 @@ static int __init ixp_module_init(void)spin_lock_init (&desc_lock);spin_lock_init (&emerg_lock); - err =init_ixp_crypto (); + err =init_ixp_crypto (&pdev->dev);if (err) {platform_device_unregister (pdev);return err;
@@ -1492,7 +1495,7 @@ static void __exit ixp_module_exit(void)if (ixp4xx_algos[i].registered)crypto_unregister_alg (&ixp4xx_algos[i].crypto); } -release_ixp_crypto (); +release_ixp_crypto (&pdev->dev);platform_device_unregister (pdev); }
Signature · 1 line
1.7.4.4
RFC PATCH 42/51 DMA-API: usb: musb: use platform_device_register_full() to avoid directly messing with dma masks
In reply to Russell King - ARM LinuxUse platform_device_register_full() for those drivers which can, to avoid messing directly with DMA masks. This can only be done when the driver does not need to access the allocated musb platform device from within its callbacks, which may be called during the musb device probing.
--- drivers/usb/musb/am35x.c | 50 ++++++++++++++---------------------------- drivers/usb/musb/da8xx.c | 49 ++++++++++++++--------------------------- drivers/usb/musb/davinci.c | 48 ++++++++++++++-------------------------- drivers/usb/musb/tusb6010.c | 49 ++++++++++++++--------------------------- 4 files changed, 68 insertions(+), 128 deletions(-)
drivers/usb/musb/am35x.c +17 -33
@@ -89,7 +89,6 @@ struct am35x_glue {struct clk *phy_clk;struct clk *clk; }; -#define glue_to_musb (g) platform_get_drvdata(g->musb)/* * am35x_musb_enable - enable interrupts
@@ -452,14 +451,18 @@ static const struct musb_platform_ops am35x_ops = { .set_vbus = am35x_musb_set_vbus, }; -static u64 am35x_dmamask =DMA_BIT_MASK (32 ); +static const struct platform_device_info am35x_dev_info = { + .name ="musb-hdrc" , + .id =PLATFORM_DEVID_AUTO , + .dma_mask =DMA_BIT_MASK (32 ), +};static int am35x_probe (struct platform_device *pdev) {struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data;struct platform_device *musb;struct am35x_glue *glue; - +struct platform_device_info pinfo;struct clk *phy_clk;struct clk *clk;
@@ -471,12 +474,6 @@ static int am35x_probe(struct platform_device *pdev) goto err0; } - musb =platform_device_alloc ("musb-hdrc" ,PLATFORM_DEVID_AUTO ); -if (!musb) { -dev_err (&pdev->dev,"failed to allocate musb device\n" ); - goto err1; - } - phy_clk =clk_get (&pdev->dev,"fck" );if (IS_ERR (phy_clk)) {dev_err (&pdev->dev,"failed to get PHY clock\n" );
@@ -503,12 +500,7 @@ static int am35x_probe(struct platform_device *pdev) goto err6; } - musb->dev.parent = &pdev->dev; - musb->dev.dma_mask = &am35x_dmamask; - musb->dev.coherent_dma_mask = am35x_dmamask; - glue->dev = &pdev->dev; - glue->musb = musb; glue->phy_clk = phy_clk; glue->clk = clk;
@@ -516,22 +508,17 @@ static int am35x_probe(struct platform_device *pdev)platform_set_drvdata (pdev, glue); - ret =platform_device_add_resources (musb, pdev->resource, - pdev->num_resources); -if (ret) { -dev_err (&pdev->dev,"failed to add resources\n" ); - goto err7; - } - - ret =platform_device_add_data (musb, pdata,sizeof (*pdata)); -if (ret) { -dev_err (&pdev->dev,"failed to add platform_data\n" ); - goto err7; - } - - ret =platform_device_add (musb); -if (ret) { -dev_err (&pdev->dev,"failed to register musb device\n" ); + pinfo = am35x_dev_info; + pinfo.parent = &pdev->dev; + pinfo.res = pdev->resource; + pinfo.num_res = pdev->num_resources; + pinfo.data = pdata; + pinfo.size_data =sizeof (*pdata); + + glue->musb = musb =platform_device_register_full (&pinfo); +if (IS_ERR (musb)) { + ret =PTR_ERR (musb); +dev_err (&pdev->dev,"failed to register musb device: %d\n" , ret); goto err7; }
@@ -550,9 +537,6 @@ static int am35x_probe(struct platform_device *pdev)clk_put (phy_clk); err3: -platform_device_put (musb); - -err1:kfree (glue); err0:
drivers/usb/musb/da8xx.c +17 -32
86 lines not on this page · raw message
drivers/usb/musb/davinci.c +17 -31
85 lines not on this page · raw message
drivers/usb/musb/tusb6010.c +17 -32
80 lines not on this page · raw message
Signature · 1 line
1.7.4.4
RFC PATCH 43/51 DMA-API: dma: edma.c: no need to explicitly initialize DMA masks
In reply to Russell King - ARM Linuxregister_platform_device_full() can setup the DMA mask provided the appropriate member is set in struct platform_device_info. So lets make that be the case. This avoids a direct reference to the DMA masks by this driver.
--- drivers/dma/edma.c | 6 ++---- 1 files changed, 2 insertions(+), 4 deletions(-)
drivers/dma/edma.c +2 -4
@@ -620,11 +620,13 @@ static struct platform_device *pdev0, *pdev1;static const struct platform_device_info edma_dev_info0 = { .name ="edma-dma-engine" , .id =0 , + .dma_mask =DMA_BIT_MASK (32 ), };static const struct platform_device_info edma_dev_info1 = { .name ="edma-dma-engine" , .id =1 , + .dma_mask =DMA_BIT_MASK (32 ), };static int edma_init (void )
@@ -638,8 +640,6 @@ static int edma_init(void) ret =PTR_ERR (pdev0); goto out; } - pdev0->dev.dma_mask = &pdev0->dev.coherent_dma_mask; - pdev0->dev.coherent_dma_mask =DMA_BIT_MASK (32 ); }if (EDMA_CTLRS ==2 ) {
@@ -649,8 +649,6 @@ static int edma_init(void)platform_device_unregister (pdev0); ret =PTR_ERR (pdev1); } - pdev1->dev.dma_mask = &pdev1->dev.coherent_dma_mask; - pdev1->dev.coherent_dma_mask =DMA_BIT_MASK (32 ); } out:
Signature · 1 line
1.7.4.4
RFC PATCH 44/51 DMA-API: dcdbas: update DMA mask handing
In reply to Russell King - ARM Linuxdcdbas was explicitly initializing DMA masks thusly:
dcdbas_pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); dcdbas_pdev->dev.dma_mask = &dcdbas_pdev->dev.coherent_dma_mask;
which bypasses the architecture check. Moreover, it is creating the dcdbas_pdev device itself, and using the platform_device_register_full() avoids some of this explicit initialization.
Convert the driver to use platform_device_register_full(), and as it makes use of coherent DMA, also call dma_set_coherent_mask() to ensure that the architecture gets to check the mask.
--- drivers/firmware/dcdbas.c | 23 ++++++++++++----------- 1 files changed, 12 insertions(+), 11 deletions(-)
drivers/firmware/dcdbas.c +12 -11
@@ -548,8 +548,9 @@ static int dcdbas_probe(struct platform_device *dev)* BIOS SMI calls require buffer addresses be in 32-bit address space. * This is done by setting the DMA mask below. */ - dcdbas_pdev->dev.coherent_dma_mask =DMA_BIT_MASK (32 ); - dcdbas_pdev->dev.dma_mask = &dcdbas_pdev->dev.coherent_dma_mask; + error =dma_set_coherent_mask (&dcdbas_pdev->dev,DMA_BIT_MASK (32 )); +if (error) +return error; error =sysfs_create_group (&dev->dev.kobj, &dcdbas_attr_group);if (error)
@@ -596,6 +597,12 @@ static struct platform_driver dcdbas_driver = { .remove = dcdbas_remove, }; +static const struct platform_device_info dcdbas_dev_info__initdata = { + .name =DRIVER_NAME , + .id =-1 , + .dma_mask =DMA_BIT_MASK (32 ), +}; +/** * dcdbas_init: initialize driver */
@@ -607,20 +614,14 @@ static int __init dcdbas_init(void)if (error)return error; - dcdbas_pdev =platform_device_alloc (DRIVER_NAME ,-1 ); -if (!dcdbas_pdev) { - error = -ENOMEM ; + dcdbas_pdev =platform_device_register_full (&dcdbas_dev_info); +if (IS_ERR (dcdbas_pdev)) { + error =PTR_ERR (dcdbas_pdev); goto err_unregister_driver; } - error =platform_device_add (dcdbas_pdev); -if (error) - goto err_free_device; -return 0 ; - err_free_device: -platform_device_put (dcdbas_pdev); err_unregister_driver:platform_driver_unregister (&dcdbas_driver);return error;
Signature · 1 line
1.7.4.4
RFC PATCH 45/51 DMA-API: firmware/google/gsmi.c: avoid direct access to DMA masks
In reply to Russell King - ARM LinuxThis driver doesn't need to directly access DMA masks if it uses the platform_device_register_full() API rather than platform_device_register_simple() - the former function can initialize the DMA mask appropriately.
--- drivers/firmware/google/gsmi.c | 13 ++++++++----- 1 files changed, 8 insertions(+), 5 deletions(-)
drivers/firmware/google/gsmi.c +8 -5
@@ -764,6 +764,13 @@ static __init int gsmi_system_valid(void)static struct kobject *gsmi_kobj;static struct efivars efivars; +static const struct platform_device_info gsmi_dev_info = { + .name ="gsmi" , + .id =-1 , +/* SMI callbacks require 32bit addresses */ + .dma_mask =DMA_BIT_MASK (32 ), +}; +static __init int gsmi_init (void ) {unsigned long flags;
@@ -776,7 +783,7 @@ static __init int gsmi_init(void) gsmi_dev.smi_cmd = acpi_gbl_FADT.smi_command;/* register device */ - gsmi_dev.pdev =platform_device_register_simple ("gsmi" ,-1 ,NULL ,0 ); + gsmi_dev.pdev =platform_device_register_full (&gsmi_dev_info);if (IS_ERR (gsmi_dev.pdev)) {printk (KERN_ERR "gsmi: unable to register platform device\n" );return PTR_ERR (gsmi_dev.pdev);
@@ -785,10 +792,6 @@ static __init int gsmi_init(void)/* SMI access needs to be serialized */ spin_lock_init (&gsmi_dev.lock); -/* SMI callbacks require 32bit addresses */ - gsmi_dev.pdev->dev.coherent_dma_mask =DMA_BIT_MASK (32 ); - gsmi_dev.pdev->dev.dma_mask = - &gsmi_dev.pdev->dev.coherent_dma_mask; ret = -ENOMEM ; gsmi_dev.dma_pool =dma_pool_create ("gsmi" , &gsmi_dev.pdev->dev,GSMI_BUF_SIZE ,GSMI_BUF_ALIGN ,0 );
Signature · 1 line
1.7.4.4
RFC PATCH 46/51 ARM: DMA-API: better handing of DMA masks for coherent allocations
In reply to Russell King - ARM LinuxWe need to start treating DMA masks as something which is specific to the bus that the device resides on, otherwise we're going to hit all sorts of nasty issues with LPAE and 32-bit DMA controllers in >32-bit systems, where memory is offset from PFN 0.
In order to start doing this, we convert the DMA mask to a PFN using the device specific dma_to_pfn() macro. This is the reverse of the pfn_to_dma() macro which is used to get the DMA address for the device.
This gives us a PFN mask, which we can then check against the PFN limit of the DMA zone.
--- arch/arm/mm/dma-mapping.c | 49 ++++++++++++++++++++++++++++++++++++++++---- arch/arm/mm/init.c | 2 + arch/arm/mm/mm.h | 2 + 3 files changed, 48 insertions(+), 5 deletions(-)
arch/arm/mm/dma-mapping.c +44 -5
@@ -173,10 +173,30 @@ static u64 get_coherent_dma_mask(struct device *dev)return 0 ; } -if ((~mask) & (u64 )arm_dma_limit) { -dev_warn (dev,"coherent DMA mask %#llx is smaller " -"than system GFP_DMA mask %#llx\n" , - mask, (u64 )arm_dma_limit); +/* +* If the mask allows for more memory than we can address, +* and we actually have that much memory, then fail the +* allocation. +*/ +if (sizeof (mask) !=sizeof (dma_addr_t) && + mask > (dma_addr_t )~0 && +dma_to_pfn (dev, ~0 ) > arm_dma_pfn_limit) { +dev_warn (dev,"Coherent DMA mask %#llx is larger than dma_addr_t allows\n" , + mask); +dev_warn (dev,"Driver did not use or check the return value from dma_set_coherent_mask()?\n" ); +return 0 ; + } + +/* +* Now check that the mask, when translated to a PFN, +* fits within the allowable addresses which we can +* allocate. +*/ +if (dma_to_pfn (dev, mask) < arm_dma_pfn_limit) { +dev_warn (dev,"Coherent DMA mask %#llx (pfn %#lx-%#lx) covers a smaller range of system memory than the DMA zone pfn 0x0-%#lx\n" , + mask, +dma_to_pfn (dev,0 ),dma_to_pfn (dev, mask) +1 , + arm_dma_pfn_limit +1 );return 0 ; } }
@@ -1008,8 +1028,27 @@ void arm_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,*/ int dma_supported (struct device *dev,u64 mask) { -if (mask < (u64 )arm_dma_limit) +unsigned long limit; + +/* +* If the mask allows for more memory than we can address, +* and we actually have that much memory, then we must +* indicate that DMA to this device is not supported. +*/ +if (sizeof (mask) !=sizeof (dma_addr_t) && + mask > (dma_addr_t )~0 && +dma_to_pfn (dev, ~0 ) > arm_dma_pfn_limit) +return 0 ; + +/* +* Translate the device's DMA mask to a PFN limit. This +* PFN number includes the page which we can DMA to. +*/ + limit =dma_to_pfn (dev, mask); + +if (limit < arm_dma_pfn_limit)return 0 ; +return 1 ; }EXPORT_SYMBOL (dma_supported);
arch/arm/mm/init.c +2 -0
@@ -217,6 +217,7 @@ EXPORT_SYMBOL(arm_dma_zone_size);* so a successful GFP_DMA allocation will always satisfy this. */ phys_addr_t arm_dma_limit; +unsigned long arm_dma_pfn_limit;static void __init arm_adjust_dma_zone (unsigned long *size,unsigned long *hole,unsigned long dma_size)
@@ -239,6 +240,7 @@ void __init setup_dma_zone(struct machine_desc *mdesc) arm_dma_limit = PHYS_OFFSET + arm_dma_zone_size - 1; }else arm_dma_limit =0xffffffff ; + arm_dma_pfn_limit = arm_dma_limit >>PAGE_SHIFT ;#endif }
arch/arm/mm/mm.h +2 -0
@@ -81,8 +81,10 @@ extern __init void add_static_vm_early(struct static_vm *svm);#ifdef CONFIG_ZONE_DMA extern phys_addr_t arm_dma_limit; +extern unsigned long arm_dma_pfn_limit;#else #define arm_dma_limit ((phys_addr_t)~0) +#define arm_dma_pfn_limit (~0ul >> PAGE_SHIFT)#endif extern phys_addr_t arm_lowmem_limit;
Signature · 1 line
1.7.4.4
Re: [PATCH RFC 46/51] ARM: DMA-API: better handing of DMA masks for coherent allocations
Quoted 12 lines · Russell King
We need to start treating DMA masks as something which is specific to the bus that the device resides on, otherwise we're going to hit all sorts of nasty issues with LPAE and 32-bit DMA controllers in >32-bit systems, where memory is offset from PFN 0.
In order to start doing this, we convert the DMA mask to a PFN using the device specific
dma_to_pfn()macro. This is the reverse of thepfn_to_dma()macro which is used to get the DMA address for the device.This gives us a PFN mask, which we can then check against the PFN limit of the DMA zone.
Quoted 6 lines
Signed-off-by Russell King <[email protected]>--- arch/arm/mm/dma-mapping.c | 49 ++++++++++++++++++++++++++++++++++++++++---- arch/arm/mm/init.c | 2 + arch/arm/mm/mm.h | 2 + 3 files changed, 48 insertions(+), 5 deletions(-)
I believe you missed handling __dma_alloc. I have a different fix than what Andreas posted. I think DMA zone handling is broken in all cases here. Feel free to combine this in to your patch if you agree.
Author: Rob Herring <[email protected]> Date: Thu Aug 1 15:51:17 2013 -0500
ARM: fix dma-mapping on LPAE
With LPAE, the DMA zone size may be 4GB, so the GFP_DMA flag needs to be set when the mask is less than or equal to the arm_dma_limit. This also fixes a bug with DMA zone mask handling. GFP_DMA should be set for any mask less than or equal to arm_dma_limit, not just less than ~0UL.
arch/arm/mm/dma-mapping.c +0 -0
@@ -651,7 +651,7 @@ static void *__dma_alloc(struct device *dev,
size_t size, dma_addr_t *handle,
if (!mask)
return NULL;- if (mask < 0xffffffffULL)
+ if (mask <= (u64)arm_dma_limit)
gfp |= GFP_DMA;
/*Quoted 112 lines
arch/arm/mm/dma-mapping.c +44
-5@@ -173,10 +173,30 @@ static u64 get_coherent_dma_mask(struct device *dev)return 0 ; } -if ((~mask) & (u64 )arm_dma_limit) { -dev_warn (dev,"coherent DMA mask %#llx is smaller " -"than system GFP_DMA mask %#llx\n" , - mask, (u64 )arm_dma_limit); +/* +* If the mask allows for more memory than we can address, +* and we actually have that much memory, then fail the +* allocation. +*/ +if (sizeof (mask) !=sizeof (dma_addr_t) && + mask > (dma_addr_t )~0 && +dma_to_pfn (dev, ~0 ) > arm_dma_pfn_limit) { +dev_warn (dev,"Coherent DMA mask %#llx is larger than dma_addr_t allows\n" , + mask); +dev_warn (dev,"Driver did not use or check the return value from dma_set_coherent_mask()?\n" ); +return 0 ; + } + +/* +* Now check that the mask, when translated to a PFN, +* fits within the allowable addresses which we can +* allocate. +*/ +if (dma_to_pfn (dev, mask) < arm_dma_pfn_limit) { +dev_warn (dev,"Coherent DMA mask %#llx (pfn %#lx-%#lx) covers a smaller range of system memory than the DMA zone pfn 0x0-%#lx\n" , + mask, +dma_to_pfn (dev,0 ),dma_to_pfn (dev, mask) +1 , + arm_dma_pfn_limit +1 );return 0 ; } }@@ -1008,8 +1028,27 @@ void arm_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,*/ int dma_supported (struct device *dev,u64 mask) { -if (mask < (u64 )arm_dma_limit) +unsigned long limit; + +/* +* If the mask allows for more memory than we can address, +* and we actually have that much memory, then we must +* indicate that DMA to this device is not supported. +*/ +if (sizeof (mask) !=sizeof (dma_addr_t) && + mask > (dma_addr_t )~0 && +dma_to_pfn (dev, ~0 ) > arm_dma_pfn_limit) +return 0 ; + +/* +* Translate the device's DMA mask to a PFN limit. This +* PFN number includes the page which we can DMA to. +*/ + limit =dma_to_pfn (dev, mask); + +if (limit < arm_dma_pfn_limit)return 0 ; +return 1 ; }EXPORT_SYMBOL (dma_supported);arch/arm/mm/init.c +2
-0@@ -217,6 +217,7 @@ EXPORT_SYMBOL(arm_dma_zone_size);* so a successful GFP_DMA allocation will always satisfy this. */ phys_addr_t arm_dma_limit; +unsigned long arm_dma_pfn_limit;static void __init arm_adjust_dma_zone (unsigned long *size,unsigned long *hole,unsigned long dma_size)@@ -239,6 +240,7 @@ void __init setup_dma_zone(struct machine_desc *mdesc) arm_dma_limit = PHYS_OFFSET + arm_dma_zone_size - 1; }else arm_dma_limit =0xffffffff ; + arm_dma_pfn_limit = arm_dma_limit >>PAGE_SHIFT ;#endif }arch/arm/mm/mm.h +2
-1@@ -81,8 +81,10 @@ extern __init void add_static_vm_early(struct static_vm *svm);#ifdef CONFIG_ZONE_DMA extern phys_addr_t arm_dma_limit; +extern unsigned long arm_dma_pfn_limit;#else #define arm_dma_limit ((phys_addr_t)~0) +#define arm_dma_pfn_limit (~0ul >> PAGE_SHIFT)#endif extern phys_addr_t arm_lowmem_limit; --1.7.4.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH RFC 46/51] ARM: DMA-API: better handing of DMA masks for coherent allocations
Quoted 21 lines · Rob Herring
Quoted 12 lines · Russell King
We need to start treating DMA masks as something which is specific to the bus that the device resides on, otherwise we're going to hit all sorts of nasty issues with LPAE and 32-bit DMA controllers in >32-bit systems, where memory is offset from PFN 0.
In order to start doing this, we convert the DMA mask to a PFN using the device specific
dma_to_pfn()macro. This is the reverse of thepfn_to_dma()macro which is used to get the DMA address for the device.This gives us a PFN mask, which we can then check against the PFN limit of the DMA zone.
Quoted 6 lines
Signed-off-by Russell King <[email protected]>--- arch/arm/mm/dma-mapping.c | 49 ++++++++++++++++++++++++++++++++++++++++---- arch/arm/mm/init.c | 2 + arch/arm/mm/mm.h | 2 + 3 files changed, 48 insertions(+), 5 deletions(-)
Quoted 3 lines
I believe you missed handling
__dma_alloc. I have a different fix than what Andreas posted. I think DMA zone handling is broken in all cases here. Feel free to combine this in to your patch if you agree.
I was starting to wonder if whether anyone was going to look at those patches...
arch/arm/mm/dma-mapping.c static void *__dma_alloc(struct device *dev, · line 656
Quoted 12 lines
arch/arm/mm/dma-mapping.c +1
-1@@ -651,7 +651,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, if (!mask) return NULL; -if (mask <0xffffffffULL ) +if (mask <= (u64 )arm_dma_limit) gfp |=GFP_DMA ;
I'm not convinced on that - I think you've missed the entire point in this patch series about what address space the 'mask' is in. 'mask' is in the device's address space, which may not be the same as the physical address space.
With LPAE, the two can become quite different address spaces with a 4GB offset between them. That's why we must stop the old-school thinking that DMA addresses and physical addresses are the same thing. We also need to stop doing stuff like passing dma_addr_t variables into phys_to_virt(). (All those short-cuts are going to break!)
arm_dma_limit is the physical address space. So, comparing the two makes no sense what so ever.
However, the use of arm_dma_limit at the top of get_coherent_dma_mask() is a bug, I think that should just become something like a 24-bit constant mask, so the NULL device gets GFP_DMA allocations like they do on x86 for that case.
I also think that 'mask' should be converted to a pfn at the location you point out before comparing with the amount of memory in the DMA zone.
Re: [PATCH RFC 46/51] ARM: DMA-API: better handing of DMA masks for coherent allocations
In reply to Russell KingQuoted 12 lines · Russell King
We need to start treating DMA masks as something which is specific to the bus that the device resides on, otherwise we're going to hit all sorts of nasty issues with LPAE and 32-bit DMA controllers in >32-bit systems, where memory is offset from PFN 0.
In order to start doing this, we convert the DMA mask to a PFN using the device specific
dma_to_pfn()macro. This is the reverse of thepfn_to_dma()macro which is used to get the DMA address for the device.This gives us a PFN mask, which we can then check against the PFN limit of the DMA zone.
Quoted 7 lines
Signed-off-by Russell King <[email protected]>--- arch/arm/mm/dma-mapping.c | 49 ++++++++++++++++++++++++++++++++++++++++---- arch/arm/mm/init.c | 2 + arch/arm/mm/mm.h | 2 + 3 files changed, 48 insertions(+), 5 deletions(-)
Tested on Arndale board with ARM_LPAE enabled.
Signature · 1 line
Tushar Behera
RFC PATCH 47/51 ARM: 7794/1: block: Rename parameter dma_mask to max_addr for blk_queue_bounce_limit()
In reply to Russell King - ARM LinuxThe blk_queue_bounce_limit() API parameter 'dma_mask' is actually the maximum address the device can handle rather than a dma_mask. Rename it accordingly to avoid it being interpreted as dma_mask.
No functional change.
The idea is to fix the bad assumptions about dma_mask wherever it could be miss-interpreted.
--- block/blk-settings.c | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-)
block/blk-settings.c +4 -4
@@ -195,17 +195,17 @@ EXPORT_SYMBOL(blk_queue_make_request);/** * blk_queue_bounce_limit - set bounce buffer limit for queue * @q: the request queue for the device -* @dma_mask: the maximum address the device can handle +* @max_addr: the maximum address the device can handle * * Description: * Different hardware can have different requirements as to what pages * it can do I/O directly to. A low level driver can call * blk_queue_bounce_limit to have lower memory pages allocated as bounce -* buffers for doing I/O to pages residing above @dma_mask. +* buffers for doing I/O to pages residing above @max_addr. **/ -void blk_queue_bounce_limit (struct request_queue *q,u64 dma_mask) +void blk_queue_bounce_limit (struct request_queue *q,u64 max_addr) { -unsigned long b_pfn = dma_mask >>PAGE_SHIFT ; +unsigned long b_pfn = max_addr >>PAGE_SHIFT ;int dma =0 ; q->bounce_gfp =GFP_NOIO ;
Signature · 1 line
1.7.4.4
Re: [PATCH RFC 47/51] ARM: 7794/1: block: Rename parameter dma_mask to max_addr for blk_queue_bounce_limit()
Sorry, these last patches were of course sent my me and not Santosh.
Quoted 49 lines · Santosh Shilimkar
The
blk_queue_bounce_limit()API parameter 'dma_mask' is actually the maximum address the device can handle rather than adma_mask. Rename it accordingly to avoid it being interpreted asdma_mask.No functional change.
The idea is to fix the bad assumptions about
dma_maskwherever it could be miss-interpreted.Signed-off-by Santosh Shilimkar <[email protected]>Signed-off-by Russell King <[email protected]>--- block/blk-settings.c | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-)block/blk-settings.c +4
-4@@ -195,17 +195,17 @@ EXPORT_SYMBOL(blk_queue_make_request);/** * blk_queue_bounce_limit - set bounce buffer limit for queue * @q: the request queue for the device -* @dma_mask: the maximum address the device can handle +* @max_addr: the maximum address the device can handle * * Description: * Different hardware can have different requirements as to what pages * it can do I/O directly to. A low level driver can call * blk_queue_bounce_limit to have lower memory pages allocated as bounce -* buffers for doing I/O to pages residing above @dma_mask. +* buffers for doing I/O to pages residing above @max_addr. **/ -void blk_queue_bounce_limit (struct request_queue *q,u64 dma_mask) +void blk_queue_bounce_limit (struct request_queue *q,u64 max_addr) { -unsigned long b_pfn = dma_mask >>PAGE_SHIFT ; +unsigned long b_pfn = max_addr >>PAGE_SHIFT ;int dma =0 ; q->bounce_gfp =GFP_NOIO ;Signature · 7 lines
1.7.4.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel at lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
RFC PATCH 48/51 ARM: 7795/1: mm: dma-mapping: Add dma_max_pfn(dev) helper function
In reply to Russell King - ARM LinuxMost of the kernel assumes that PFN0 is the start of the physical memory (RAM). This assumptions is not true on most of the ARM SOCs and hence and if one try to update the ARM port to follow the assumptions, we end of breaking the dma bounce limit for few block layer drivers. One such example is trying to unify the meaning of max*_pfn on ARM as the bootmem layer expects, breaks few block layer driver dma bounce limit.
To fix this problem, we introduce dma_max_pfn(dev) generic helper with a possibility of override from the architecture code. The helper converts a DMA bitmask of bits to a block PFN number. In all the generic cases, it is just "dev->dma_mask >> PAGE_SHIFT" and hence default behavior is maintained as is.
Subsequent patches will make use of the helper. No functional change.
--- include/linux/dma-mapping.h | 7 +++++++ 1 files changed, 7 insertions(+), 0 deletions(-)
include/linux/dma-mapping.h +7 -0
@@ -153,6 +153,13 @@ static inline int dma_set_seg_boundary(struct device *dev, unsigned long mask)return -EIO ; } +#ifndef dma_max_pfn +static inline unsigned long dma_max_pfn (struct device *dev) +{ +return *dev->dma_mask >>PAGE_SHIFT ; +} +#endif +static inline void *dma_zalloc_coherent (struct device *dev,size_t size,dma_addr_t *dma_handle,gfp_t flag) {
Signature · 1 line
1.7.4.4
RFC PATCH 49/51 ARM: 7796/1: scsi: Use dma_max_pfn(dev) helper for bounce_limit calculations
In reply to Russell King - ARM LinuxDMA bounce limit is the maximum direct DMA'able memory beyond which bounce buffers has to be used to perform dma operations. SCSI driver relies on dma_mask but its calculation is based on max_*pfn which don't have uniform meaning across architectures. So make use of dma_max_pfn() which is expected to return the DMAable maximum pfn value across architectures.
--- drivers/scsi/scsi_lib.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/scsi/scsi_lib.c +1 -1
@@ -1684,7 +1684,7 @@ u64 scsi_calculate_bounce_limit(struct Scsi_Host *shost) host_dev =scsi_get_device (shost);if (host_dev && host_dev->dma_mask) - bounce_limit = *host_dev->dma_mask; + bounce_limit =dma_max_pfn (host_dev) <<PAGE_SHIFT ;return bounce_limit; }
Signature · 1 line
1.7.4.4
RFC PATCH 50/51 ARM: 7797/1: mmc: Use dma_max_pfn(dev) helper for bounce_limit calculations
In reply to Russell King - ARM LinuxDMA bounce limit is the maximum direct DMA'able memory beyond which bounce buffers has to be used to perform dma operations. MMC queue layr relies on dma_mask but its calculation is based on max_*pfn which don't have uniform meaning across architectures. So make use of dma_max_pfn() which is expected to return the DMAable maximum pfn value across architectures.
--- drivers/mmc/card/queue.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-)
drivers/mmc/card/queue.c +2 -1
@@ -15,6 +15,7 @@#include <linux/freezer.h> #include <linux/kthread.h> #include <linux/scatterlist.h> +#include <linux/dma-mapping.h> #include <linux/mmc/card.h> #include <linux/mmc/host.h>
@@ -196,7 +197,7 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card,struct mmc_queue_req *mqrq_prev = &mq->mqrq[1 ];if (mmc_dev (host)->dma_mask && *mmc_dev (host)->dma_mask) - limit = *mmc_dev (host)->dma_mask; + limit =dma_max_pfn (mmc_dev (host)) <<PAGE_SHIFT ; mq->card = card; mq->queue =blk_init_queue (mmc_request_fn, lock);
Signature · 1 line
1.7.4.4
RFC PATCH 51/51 ARM: 7805/1: mm: change max*pfn to include the physical offset of memory
In reply to Russell King - ARM LinuxMost of the kernel code assumes that max*pfn is maximum pfns because the physical start of memory is expected to be PFN0. Since this assumption is not true on ARM architectures, the meaning of max*pfn is number of memory pages. This is done to keep drivers happy which are making use of of these variable to calculate the dma bounce limit using dma_mask.
Now since we have a architecture override possibility for DMAable maximum pfns, lets make meaning of max*pfns as maximum pnfs on ARM as well.
--- arch/arm/include/asm/dma-mapping.h | 8 ++++++++ arch/arm/mm/init.c | 10 ++++------ 2 files changed, 12 insertions(+), 6 deletions(-)
arch/arm/include/asm/dma-mapping.h +8 -0
@@ -64,6 +64,7 @@ static inline dma_addr_t virt_to_dma(struct device *dev, void *addr) {return (dma_addr_t )__virt_to_bus ((unsigned long )(addr)); } +#else static inline dma_addr_t pfn_to_dma (struct device *dev,unsigned long pfn) {
@@ -86,6 +87,13 @@ static inline dma_addr_t virt_to_dma(struct device *dev, void *addr) }#endif +/* The ARM override for dma_max_pfn() */ +static inline unsigned long dma_max_pfn (struct device *dev) +{ +return PHYS_PFN_OFFSET +dma_to_pfn (dev, *dev->dma_mask); +} +#define dma_max_pfn (dev) dma_max_pfn(dev) +/* * DMA errors are defined by all-bits-set in the DMA address. */
arch/arm/mm/init.c +4 -6
@@ -422,12 +422,10 @@ void __init bootmem_init(void)* This doesn't seem to be used by the Linux memory manager any * more, but is used by ll_rw_block. If we can get rid of it, we * also get rid of some of the stuff above as well. -* -* Note: max_low_pfn and max_pfn reflect the number of _pages_ in -* the system, not the maximum PFN. */ - max_low_pfn = max_low -PHYS_PFN_OFFSET ; - max_pfn = max_high -PHYS_PFN_OFFSET ; + min_low_pfn = min; + max_low_pfn = max_low; + max_pfn = max_high; }/*
@@ -533,7 +531,7 @@ static inline void free_area_high(unsigned long pfn, unsigned long end)static void __init free_highpages (void ) {#ifdef CONFIG_HIGHMEM -unsigned long max_low = max_low_pfn +PHYS_PFN_OFFSET ; +unsigned long max_low = max_low_pfn;struct memblock_region *mem, *res;/* set highmem page free */
Signature · 1 line
1.7.4.4
Re: [PATCH RFC 51/51] ARM: 7805/1: mm: change max*pfn to include the physical offset of memory
Quoted 31 lines · Santosh Shilimkar
Most of the kernel code assumes that max*pfn is maximum pfns because the physical start of memory is expected to be PFN0. Since this assumption is not true on ARM architectures, the meaning of max*pfn is number of memory pages. This is done to keep drivers happy which are making use of of these variable to calculate the dma bounce limit using
dma_mask.Now since we have a architecture override possibility for DMAable maximum pfns, lets make meaning of max*pfns as maximum pnfs on ARM as well.
Signed-off-by Santosh Shilimkar <[email protected]>Signed-off-by Russell King <[email protected]>--- arch/arm/include/asm/dma-mapping.h | 8 ++++++++ arch/arm/mm/init.c | 10 ++++------ 2 files changed, 12 insertions(+), 6 deletions(-)arch/arm/include/asm/dma-mapping.h +1
-0@@ -64,6 +64,7 @@ static inline dma_addr_t virt_to_dma(struct device *dev, void *addr) {return (dma_addr_t )__virt_to_bus ((unsigned long )(addr)); } +#else static inline dma_addr_t pfn_to_dma (struct device *dev,unsigned long pfn) {
arch/arm/include/asm/dma-mapping.h static inline dma_addr_t virt_to_dma(struct device *dev, void *addr) · line 93
Quoted 7 lines
arch/arm/include/asm/dma-mapping.h +4
-0@@ -86,6 +87,13 @@ static inline dma_addr_t virt_to_dma(struct device *dev, void *addr) }#endif +/* The ARM override for dma_max_pfn() */ +static inline unsigned long dma_max_pfn (struct device *dev) +{ +return PHYS_PFN_OFFSET +dma_to_pfn (dev, *dev->dma_mask);
Do we need to handle dev == NULL case?
Rob
Re: [PATCH RFC 51/51] ARM: 7805/1: mm: change max*pfn to include the physical offset of memory
Quoted 8 lines · Rob Herring
arch/arm/include/asm/dma-mapping.h static inline dma_addr_t virt_to_dma(struct device *dev, void *addr) · line 93
Quoted 4 lines · Santosh Shilimkar
arch/arm/include/asm/dma-mapping.h +4
-0+/* The ARM override for dma_max_pfn() */ +static inline unsigned long dma_max_pfn (struct device *dev) +{ +return PHYS_PFN_OFFSET +dma_to_pfn (dev, *dev->dma_mask);Do we need to handle dev == NULL case?
No, look at where it's used and the code it's replacing. You'll find that its callsites handle the dev = NULL case.
Quoted 2 lines · Russell King - ARM Linux
So, this patch set is a preview of the DMA mask changes which I currently have in my tree.
Looking at the comments which this patch set has received, I see very little in the way of feedback. So I think it's time to move to the next stage. I will be re-posting these with a [PATCH] tag, with the appropriate CC's, and putting them into linux-next a few days after assuming no objections to them are forthcoming.