Skip to contentSkip to conversation

arm: include config.h in vectors.S

PATCH New Chris Packham 3 participants 4 messages Jul 14, 2014 – Aug 20, 2014 Arm (32-bit)

lore
Share & tools
lore

Chris Packham

author
#0 lore raw

PATCH 1/1 arm: include config.h in vectors.S

In order to use configuration flags it is necessary to include config.h. Without this arm targets that use CONFIG_USE_IRQ or CONFIG_SPL_BUILD won't get the correct code.

Signed-off-by Chris Packham <[email protected]>

---
Resent without corporate disclaimer

 arch/arm/lib/vectors.S |    1 +
 1 file changed, 1 insertion(+)
arch/arm/lib/vectors.S +1 -0
index e6538ef..a8b6c53 100644
@@ -12,6 +12,7 @@
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
+#include <config.h>
 
 /*
  *************************************************************************
Signature · 1 line
1.7.9.5
author
#1 lore raw

PATCH 1/1 arm: include config.h in vectors.S

Quoted 17 lines · Chris Packham

In order to use configuration flags it is necessary to include config.h. Without this arm targets that use CONFIG_USE_IRQ or CONFIG_SPL_BUILD won't get the correct code.

Signed-off-by Chris Packham <[email protected]>

---
Resent without corporate disclaimer

 arch/arm/lib/vectors.S |    1 +
 1 file changed, 1 insertion(+)
arch/arm/lib/vectors.S +0 -0
index e6538ef..a8b6c53 100644

arch/arm/lib/vectors.S line 18

Quoted 7 lines
arch/arm/lib/vectors.S +1 -0
@@ -12,6 +12,7 @@
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
+#include <config.h>
 
 /*
  *************************************************************************

Ping?

#2 lore raw

PATCH 1/1 arm: include config.h in vectors.S

Hi Albert,

Quoted 6 lines · Chris Packham
Quoted 5 lines · Chris Packham

In order to use configuration flags it is necessary to include config.h. Without this arm targets that use CONFIG_USE_IRQ or CONFIG_SPL_BUILD won't get the correct code.

Signed-off-by Chris Packham <[email protected]>

I submitted a similar patch on July 7, see
http://patchwork.ozlabs.org/patch/367453/. Please apply either of them to get the issue fixed.
Thanks,
Christian

Quoted 25 lines
Quoted 12 lines

---
Resent without corporate disclaimer

 arch/arm/lib/vectors.S |    1 +
 1 file changed, 1 insertion(+)
arch/arm/lib/vectors.S +0 -0
index e6538ef..a8b6c53 100644

arch/arm/lib/vectors.S line 18

Quoted 7 lines
arch/arm/lib/vectors.S +1 -0
@@ -12,6 +12,7 @@
  *
  * SPDX-License-Identifier:  GPL-2.0+
  */
+#include <config.h>
 
 /*
  *************************************************************************

Ping?
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

#3 lore raw

PATCH 1/1 arm: include config.h in vectors.S

In reply to Chris Packham

Hi Chris,

Quoted 22 lines · Chris Packham
Quoted 21 lines · Chris Packham

In order to use configuration flags it is necessary to include config.h. Without this arm targets that use CONFIG_USE_IRQ or CONFIG_SPL_BUILD won't get the correct code.

Signed-off-by Chris Packham <[email protected]>

---
Resent without corporate disclaimer

 arch/arm/lib/vectors.S |    1 +
 1 file changed, 1 insertion(+)
arch/arm/lib/vectors.S +1 -0
index e6538ef..a8b6c53 100644
@@ -12,6 +12,7 @@
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
+#include <config.h>
Quoted 5 lines

arch/arm/lib/vectors.S line 18

Quoted 3 lines
arch/arm/lib/vectors.S +0 -0
 /*
  *************************************************************************

Ping?

Underway -- will get in Real Soon Now.

Amicalement,

Signature · 1 line
Albert.