Skip to contentSkip to conversation

net: dsa: actually force the speed on the CPU port

PATCH In review Russell King 2 participants 2 messages Sep 14, 2015 – Sep 21, 2015

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 net: dsa: actually force the speed on the CPU port

Commit 54d792f257c6 ("net: dsa: Centralise global and port setup code into mv88e6xxx.") merged in the 4.2 merge window broke the link speed forcing for the CPU port of Marvell DSA switches. The original code was:

        /* MAC Forcing register: don't force link, speed, duplex
         * or flow control state to any particular values on physical
         * ports, but force the CPU port and all DSA ports to 1000 Mb/s
         * full duplex.
         */
        if (dsa_is_cpu_port(ds, p) || ds->dsa_port_mask & (1 << p))
                REG_WRITE(addr, 0x01, 0x003e);
        else
                REG_WRITE(addr, 0x01, 0x0003);

but the new code does a read-modify-write:

                reg = _mv88e6xxx_reg_read(ds, REG_PORT(port), PORT_PCS_CTRL);
                if (dsa_is_cpu_port(ds, port) ||
                    ds->dsa_port_mask & (1 << port)) {
                        reg |= PORT_PCS_CTRL_FORCE_LINK |
                                PORT_PCS_CTRL_LINK_UP |
                                PORT_PCS_CTRL_DUPLEX_FULL |
                                PORT_PCS_CTRL_FORCE_DUPLEX;
                        if (mv88e6xxx_6065_family(ds))
                                reg |= PORT_PCS_CTRL_100;
                        else
                                reg |= PORT_PCS_CTRL_1000;

The link speed in the PCS control register is a two bit field. Forcing the link speed in this way doesn't ensure that the bit field is set to the correct value - on the hardware I have here, the speed bitfield remains set to 0x03, resulting in the speed not being forced to gigabit.

We must clear both bits before forcing the link speed.

Fixes 54d792f257c6 ("net: dsa: Centralise global and port setup code into mv88e6xxx.")
---
 drivers/net/dsa/mv88e6xxx.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/dsa/mv88e6xxx.c +1 -0
index 561342466076..26ec2fbfaa89 100644
@@ -1387,6 +1387,7 @@ static int mv88e6xxx_setup_port(struct dsa_switch *ds, int port)
 		reg = _mv88e6xxx_reg_read(ds, REG_PORT(port), PORT_PCS_CTRL);
 		if (dsa_is_cpu_port(ds, port) ||
 		    ds->dsa_port_mask & (1 << port)) {
+			reg &= ~PORT_PCS_CTRL_UNFORCED;
 			reg |= PORT_PCS_CTRL_FORCE_LINK |
 				PORT_PCS_CTRL_LINK_UP |
 				PORT_PCS_CTRL_DUPLEX_FULL |
Signature · 1 line
2.1.0
maintainer
#1 lore raw

From: Russell King <[email protected]>
Date: Mon, 14 Sep 2015 13:09:04 +0100

Quoted 34 lines

Commit 54d792f257c6 ("net: dsa: Centralise global and port setup code into mv88e6xxx.") merged in the 4.2 merge window broke the link speed forcing for the CPU port of Marvell DSA switches. The original code was:

        /* MAC Forcing register: don't force link, speed, duplex
         * or flow control state to any particular values on physical
         * ports, but force the CPU port and all DSA ports to 1000 Mb/s
         * full duplex.
         */
        if (dsa_is_cpu_port(ds, p) || ds->dsa_port_mask & (1 << p))
                REG_WRITE(addr, 0x01, 0x003e);
        else
                REG_WRITE(addr, 0x01, 0x0003);

but the new code does a read-modify-write:

                reg = _mv88e6xxx_reg_read(ds, REG_PORT(port), PORT_PCS_CTRL);
                if (dsa_is_cpu_port(ds, port) ||
                    ds->dsa_port_mask & (1 << port)) {
                        reg |= PORT_PCS_CTRL_FORCE_LINK |
                                PORT_PCS_CTRL_LINK_UP |
                                PORT_PCS_CTRL_DUPLEX_FULL |
                                PORT_PCS_CTRL_FORCE_DUPLEX;
                        if (mv88e6xxx_6065_family(ds))
                                reg |= PORT_PCS_CTRL_100;
                        else
                                reg |= PORT_PCS_CTRL_1000;

The link speed in the PCS control register is a two bit field. Forcing the link speed in this way doesn't ensure that the bit field is set to the correct value - on the hardware I have here, the speed bitfield remains set to 0x03, resulting in the speed not being forced to gigabit.

Quoted 4 lines

We must clear both bits before forcing the link speed.

Fixes 54d792f257c6 ("net: dsa: Centralise global and port setup code into mv88e6xxx.")

This code looks really different now in the current tree, can you please respin?

Thanks.