Applied "regulator: tps65023: add device tree support" to the regulator tree
Subsystems (2)
Mark Brown
maintainerThe patch
regulator: tps65023: add device tree support
has been applied to the regulator tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
Quoted 1 line
From
2d3eda67dd2a02087a2ae6916c92ee1966945b88Mon Sep 17 00:00:00 2001
From: Thomas Elste <[email protected]>
Date: Mon, 21 Sep 2015 16:30:47 +0200
Subject: [PATCH] regulator: tps65023: add device tree support
Add device tree based initialization support for tps65023 regulators. Therefore add macros for regulator definition setting of_match and regulators_node members. Add initialization of regulator_desc data using these macros. Remove old regulator_desc initialization.
Add device tree binding document for tps65023 regulators.
--- .../devicetree/bindings/regulator/tps65023.txt | 60 +++++ drivers/regulator/tps65023-regulator.c | 282 ++++++++------------- 2 files changed, 168 insertions(+), 174 deletions(-) create mode 100644 Documentation/devicetree/bindings/regulator/tps65023.txt
Documentation/devicetree/bindings/regulator/tps65023.txt new file +60 -0
@@ -0,0 +1,60 @@ +TPS65023 family of regulators + +Required properties: +- compatible: Must be one of the following. + "ti,tps65020", + "ti,tps65021", + "ti,tps65023", +- reg: I2C slave address +- regulators: list of regulators provided by this controller, must be named + after their hardware counterparts: VDCDC[1-3] and LDO[1-2] +- regulators: This is the list of child nodes that specify the regulator + initialization data for defined regulators. The definition for each of + these nodes is defined using the standard binding for regulators found at + Documentation/devicetree/bindings/regulator/regulator.txt. + +Each regulator is defined using the standard binding for regulators. + +Example: + + tps65023@48 { + compatible = "ti,tps65023"; + reg = <0x48>; + + regulators { + VDCDC1 { + regulator-name = "vdd_mpu"; + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + VDCDC2 { + regulator-name = "vdd_core"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + VDCDC3 { + regulator-name = "vdd_io"; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + LDO1 { + regulator-name = "vdd_usb18"; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + LDO2 { + regulator-name = "vdd_usb33"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; + };
drivers/regulator/tps65023-regulator.c +108 -174
361 lines not on this page · raw message
Signature · 1 line
2.5.0