ASoC: ssm4567: Reset device before regcache_sync()
Subsystems (3)
Lars-Peter Clausen
maintainerPATCH 1/1 ASoC: ssm4567: Reset device before regcache_sync()
When the ssm4567 is powered up the driver calles regcache_sync() to restore the register map content. regcache_sync() assumes that the device is in its power-on reset state. Make sure that this is the case by explicitly resetting the ssm4567 register map before calling regcache_sync() otherwise we might end up with a incorrect register map which leads to undefined behaviour.
One such undefined behaviour was observed when returning from system suspend while a playback stream is active, in that case the ssm4567 was kept muted after resume.
--- sound/soc/codecs/ssm4567.c | 5 +++++ 1 file changed, 5 insertions(+)
sound/soc/codecs/ssm4567.c +5 -0
@@ -352,6 +352,11 @@ static int ssm4567_set_power(struct ssm4567 *ssm4567, bool enable)regcache_cache_only (ssm4567->regmap, !enable);if (enable) { + ret =regmap_write (ssm4567->regmap,SSM4567_REG_SOFT_RESET , +0x00 ); +if (ret) +return ret; + ret =regmap_update_bits (ssm4567->regmap,SSM4567_REG_POWER_CTRL ,SSM4567_POWER_SPWDN ,0x00 );
Signature · 1 line
2.1.4
Mark Brown
maintainerApplied "ASoC: ssm4567: Reset device before regcache_sync()" to the asoc tree
The patch
ASoC: ssm4567: Reset device before regcache_sync()
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
Quoted 1 line
From
712a8038cc24dba668afe82f0413714ca87184e0Mon Sep 17 00:00:00 2001
From: Lars-Peter Clausen <[email protected]>
Date: Wed, 27 Jan 2016 14:26:18 +0100
Subject: [PATCH] ASoC: ssm4567: Reset device before regcache_sync()
When the ssm4567 is powered up the driver calles regcache_sync() to restore the register map content. regcache_sync() assumes that the device is in its power-on reset state. Make sure that this is the case by explicitly resetting the ssm4567 register map before calling regcache_sync() otherwise we might end up with a incorrect register map which leads to undefined behaviour.
One such undefined behaviour was observed when returning from system suspend while a playback stream is active, in that case the ssm4567 was kept muted after resume.
--- sound/soc/codecs/ssm4567.c | 5 +++++ 1 file changed, 5 insertions(+)
sound/soc/codecs/ssm4567.c +5 -0
@@ -352,6 +352,11 @@ static int ssm4567_set_power(struct ssm4567 *ssm4567, bool enable)regcache_cache_only (ssm4567->regmap, !enable);if (enable) { + ret =regmap_write (ssm4567->regmap,SSM4567_REG_SOFT_RESET , +0x00 ); +if (ret) +return ret; + ret =regmap_update_bits (ssm4567->regmap,SSM4567_REG_POWER_CTRL ,SSM4567_POWER_SPWDN ,0x00 );
Signature · 1 line
2.7.0.rc3