Skip to contentSkip to conversation

Add audio support for Microsoft Surface 3 tablet

PATCH Superseded Stephen Just 2 participants 5 messages Jul 4, 2016 – Jul 8, 2016 1 message not in the archive

Subsystems (4)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

cover Add audio support for Microsoft Surface 3 tablet

This series adds audio support for the Surface 3 tablet.

This tablet identifes an rt5645 audio codec using the ACPI identifer 10EC5640, which is already associated with the rt5640, thus a quirk is required to have the correct drivers loaded.

Additionally, in order for jack-detection and the tablet's internal microphone to work, the Surface 3 must be configured in the audio codec driver similarly to other devices.

Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=98001

UCM configuration to be added to alsa-lib is included in patch 3, not included in the diffstat below.

Stephen Just (2):
ASoC: rt5645: Add support for Surface 3 tablet
ASoC: Intel: Atom: add quirk for CHT w/ RT5645

 sound/soc/codecs/rt5645.c               |  7 +++++++
 sound/soc/intel/atom/sst/sst_acpi.c     | 28 +++++++++++++++++++++++++++-
 sound/soc/intel/boards/cht_bsw_rt5645.c |  1 +
 3 files changed, 35 insertions(+), 1 deletion(-)
Signature · 1 line
2.7.4
#1 lore raw

PATCH 1/3 ASoC: rt5645: Add support for Surface 3 tablet

* Add a dmi match for Surface 3
* Add ACPI match "10EC5640"

The Surface 3 tablet identifies the codec in ACPI as 10EC5640, but other devices use this identifier to match the rt5640 codec. However, the probe code for each driver will filter out mismatches.

Cc Mark Brown <[email protected]>
Cc Vinod Koul <[email protected]>
---
 sound/soc/codecs/rt5645.c | 7 +++++++
 1 file changed, 7 insertions(+)
sound/soc/codecs/rt5645.c +7 -0
index 3c6594d..761ca88 100644
@@ -3531,6 +3531,7 @@ MODULE_DEVICE_TABLE(i2c, rt5645_i2c_id);
 static const struct acpi_device_id rt5645_acpi_match[] = {
 	{ "10EC5645", 0 },
 	{ "10EC5650", 0 },
+	{ "10EC5640", 0 },
 	{},
 };
 MODULE_DEVICE_TABLE(acpi, rt5645_acpi_match);
@@ -3561,6 +3562,12 @@ static const struct dmi_system_id dmi_platform_intel_braswell[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Setzer"),
 		},
 	},
+	{
+		.ident = "Microsoft Surface 3",
+		.matches = {
+			DMI_MATCH(DMI_PRODUCT_NAME, "Surface 3"),
+		},
+	},
 	{ }
 };
 
Signature · 1 line
2.7.4
maintainer
#2 lore raw

Applied "ASoC: rt5645: Add ACPI ID 10EC5640" to the asoc tree

The patch

ASoC: rt5645: Add ACPI ID 10EC5640

has been applied to the asoc tree at

git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

Quoted 1 line

From 79c89031e0b6de9e3dc2318b211f1872c99753f7 Mon Sep 17 00:00:00 2001

From: Vinod Koul <[email protected]>
Date: Fri, 8 Jul 2016 15:39:50 +0530
Subject: [PATCH] ASoC: rt5645: Add ACPI ID 10EC5640

Some CHT platforms use RT5645 codec which has entry 10EC5640 so add it. Also add DMI quirk for jack detection.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=98001

---
 sound/soc/codecs/rt5645.c | 7 +++++++
 1 file changed, 7 insertions(+)
sound/soc/codecs/rt5645.c +7 -0
index dbf05600b5ff..e5556a19c995 100644
@@ -3543,6 +3543,7 @@ MODULE_DEVICE_TABLE(i2c, rt5645_i2c_id);
 static const struct acpi_device_id rt5645_acpi_match[] = {
 	{ "10EC5645", 0 },
 	{ "10EC5650", 0 },
+	{ "10EC5640", 0 },
 	{},
 };
 MODULE_DEVICE_TABLE(acpi, rt5645_acpi_match);
@@ -3573,6 +3574,12 @@ static const struct dmi_system_id dmi_platform_intel_braswell[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Setzer"),
 		},
 	},
+	{
+		.ident = "Microsoft Surface 3",
+		.matches = {
+			DMI_MATCH(DMI_PRODUCT_NAME, "Surface 3"),
+		},
+	},
 	{ }
 };
 
Signature · 1 line
2.8.1
#3 lore raw

PATCH 2/3 ASoC: Intel: Atom: add quirk for CHT w/ RT5645

In reply to Stephen Just

The Surface 3 uses an RT5645 audio codec, but the ACPI identifier used is that for the RT5640. Use a DMI match to override the driver_data provided by ACPI to workaround ID conflict.

Cc Pierre-Louis Bossart <[email protected]>
Cc Mark Brown <[email protected]>
Cc Vinod Koul <[email protected]>
---
 sound/soc/intel/atom/sst/sst_acpi.c     | 29 ++++++++++++++++++++++++++++-
 sound/soc/intel/boards/cht_bsw_rt5645.c |  1 +
 2 files changed, 29 insertions(+), 1 deletion(-)
sound/soc/intel/atom/sst/sst_acpi.c +28 -1
index 3bc4b63..ef40608 100644
@@ -19,6 +19,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/dmi.h>
 #include <linux/fs.h>
 #include <linux/interrupt.h>
 #include <linux/slab.h>
@@ -131,6 +132,8 @@ static struct sst_platform_info chv_platform_data = {
 	.platform = "sst-mfld-platform",
 };
 
+static const struct dmi_system_id dmi_platform_quirk_table[];
+
 static int sst_platform_get_resources(struct intel_sst_drv *ctx)
 {
 	struct resource *rsrc;
@@ -224,6 +227,7 @@ static int sst_acpi_probe(struct platform_device *pdev)
 	struct platform_device *mdev;
 	struct platform_device *plat_dev;
 	struct sst_platform_info *pdata;
+	const struct dmi_system_id *dmi_match;
 	unsigned int dev_id;
 
 	id = acpi_match_device(dev->driver->acpi_match_table, dev);
@@ -231,7 +235,13 @@ static int sst_acpi_probe(struct platform_device *pdev)
 		return -ENODEV;
 	dev_dbg(dev, "for %s", id->id);
 
-	mach = (struct sst_acpi_mach *)id->driver_data;
+	/* check for quirk when getting driver_data */
+	dmi_match = dmi_first_match(dmi_platform_quirk_table);
+	if (dmi_match)
+		mach = (struct sst_acpi_mach *)dmi_match->driver_data;
+	else
+		mach = (struct sst_acpi_mach *)id->driver_data;
+
 	mach = sst_acpi_find_machine(mach);
 	if (mach == NULL) {
 		dev_err(dev, "No matching machine driver found\n");
@@ -345,7 +355,24 @@ static struct sst_acpi_mach sst_acpi_chv[] = {
 	/* some CHT-T platforms rely on RT5640, use Baytrail machine driver */
 	{"10EC5640", "bytcr_rt5640", "intel/fw_sst_22a8.bin", "bytcr_rt5640", NULL,
 						&chv_platform_data },
+	{},
+};
 
+static struct sst_acpi_mach sst_acpi_chv_quirk[] = {
+	/* some CHT-T platforms rely on RT5645 but use the ID from RT5640 */
+	{"10EC5640", "cht-bsw-rt5645", "intel/fw_sst_22a8.bin", "cht-bsw", NULL,
+						&chv_platform_data },
+	{},
+};
+
+static const struct dmi_system_id dmi_platform_quirk_table[] = {
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Surface 3"),
+		},
+		.driver_data = (unsigned long *) &sst_acpi_chv_quirk,
+	},
 	{},
 };
 
sound/soc/intel/boards/cht_bsw_rt5645.c +1 -0
index d7ef292..bf99efb 100644
@@ -340,6 +340,7 @@ static struct snd_soc_card snd_soc_card_chtrt5650 = {
 };
 
 static struct cht_acpi_card snd_soc_cards[] = {
+	{"10EC5640", CODEC_TYPE_RT5645, &snd_soc_card_chtrt5645},
 	{"10EC5645", CODEC_TYPE_RT5645, &snd_soc_card_chtrt5645},
 	{"10EC5650", CODEC_TYPE_RT5650, &snd_soc_card_chtrt5650},
 };
Signature · 1 line
2.7.4

A message that is not in the archive (sent off-list or not yet received): [email protected]

maintainer
#5 lore raw

Re: [PATCH 3/3] [alsa-lib] conf/ucm: chtrt5645: Add UCM config for chtrt5645

Quoted 2 lines · Stephen Just

Add a UCM configuration for the rt5645 codec on Intel's Cherry-Trail platform. Tested on the Microsoft Surface 3.

This is not a kernel patch, it should be sent separately and sent to the alsa-lib maintainers (at least Taksahi).