regulator: aat2870-regulator: constify regulator_ops structure

Declare regulator_ops structure as const as it is only stored in the ops field of a regulator_desc structure. This field is of type const, so regulator_ops structures having this property can be made const too.

File size before: drivers/regulator/aat2870-regulator.o

   text	   data	    bss	    dec	    hex	filename
    938	   1424	      0	   2362	    93a regulator/aat2870-regulator.o

File size after: drivers/regulator/aat2870-regulator.o

   text	   data	    bss	    dec	    hex	filename
   1194	   1168	      0	   2362	    93a regulator/aat2870-regulator.o

---
 drivers/regulator/aat2870-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 9dfabda..afc5b59 100644
@@ -97,7 +97,7 @@ static int aat2870_ldo_is_enabled(struct regulator_dev *rdev)
 	return val & ri->enable_mask ? 1 : 0;
 }
 
-static struct regulator_ops aat2870_ldo_ops = {
+static const struct regulator_ops aat2870_ldo_ops = {
 	.list_voltage = regulator_list_voltage_table,
 	.map_voltage = regulator_map_voltage_ascend,
 	.set_voltage_sel = aat2870_ldo_set_voltage_sel,

1.9.1

The patch

regulator: aat2870-regulator: constify regulator_ops structure

has been applied to the regulator tree at

git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

From: Bhumika Goyal <[email protected]>
Date: Sat, 28 Jan 2017 19:00:52 +0530
Subject: [PATCH] regulator: aat2870-regulator: constify regulator_ops
structure

Declare regulator_ops structure as const as it is only stored in the ops field of a regulator_desc structure. This field is of type const, so regulator_ops structures having this property can be made const too.

File size before: drivers/regulator/aat2870-regulator.o

   text	   data	    bss	    dec	    hex	filename
    938	   1424	      0	   2362	    93a regulator/aat2870-regulator.o

File size after: drivers/regulator/aat2870-regulator.o

   text	   data	    bss	    dec	    hex	filename
   1194	   1168	      0	   2362	    93a regulator/aat2870-regulator.o

---
 drivers/regulator/aat2870-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 9dfabda8f478..afc5b5900181 100644
@@ -97,7 +97,7 @@ static int aat2870_ldo_is_enabled(struct regulator_dev *rdev)
 	return val & ri->enable_mask ? 1 : 0;
 }
 
-static struct regulator_ops aat2870_ldo_ops = {
+static const struct regulator_ops aat2870_ldo_ops = {
 	.list_voltage = regulator_list_voltage_table,
 	.map_voltage = regulator_map_voltage_ascend,
 	.set_voltage_sel = aat2870_ldo_set_voltage_sel,

2.11.0