ASoC: Correct DT binding examples IRQ usage for da7218/9

Currently in the DT bindings documents for DA7218 and DA7219, the examples for bindings usage show ACTIVE_HIGH IRQ usage. For both devices this is incorrect as the devices themselves only suport ACTIVE_LOW. This patch set rectifies the inconsistency.

Adam Thomson (2):
ASoC: da7219: Correct IRQ level in DT binding example
ASoC: da7218: Correct IRQ level in DT binding example

 Documentation/devicetree/bindings/sound/da7218.txt | 2 +-
 Documentation/devicetree/bindings/sound/da7219.txt | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Current DT binding documentation shows an example where the IRQ for the device is chosen to be ACTIVE_HIGH. This is incorrect as the device only supports ACTIVE_LOW, so this commit fixes that discrepancy.

---
 Documentation/devicetree/bindings/sound/da7219.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index cf61681..5b54d2d 100644
@@ -77,7 +77,7 @@ Example:
 		reg = <0x1a>;
 
 		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 
 		VDD-supply = <&reg_audio>;
 		VDDMIC-supply = <&reg_audio>;

1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

The patch

ASoC: da7219: Correct IRQ level in DT binding example

has been applied to the asoc tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

From: Adam Thomson <[email protected]>
Date: Fri, 17 Nov 2017 15:09:27 +0000
Subject: [PATCH] ASoC: da7219: Correct IRQ level in DT binding example

Current DT binding documentation shows an example where the IRQ for the device is chosen to be ACTIVE_HIGH. This is incorrect as the device only supports ACTIVE_LOW, so this commit fixes that discrepancy.

---
 Documentation/devicetree/bindings/sound/da7219.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index cf61681826b6..5b54d2d045c3 100644
@@ -77,7 +77,7 @@ Example:
 		reg = <0x1a>;
 
 		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 
 		VDD-supply = <&reg_audio>;
 		VDDMIC-supply = <&reg_audio>;

2.15.0

Current DT binding documentation shows an example where the IRQ for the device is chosen to be ACTIVE_HIGH. This is incorrect as the device only supports ACTIVE_LOW, so this commit fixes that discrepancy.

---
 Documentation/devicetree/bindings/sound/da7218.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 5ca5a70..3ab9dfe 100644
@@ -73,7 +73,7 @@ Example:
 		compatible = "dlg,da7218";
 		reg = <0x1a>;
 		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		wakeup-source;
 
 		VDD-supply = <&reg_audio>;

1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

The patch

ASoC: da7218: Correct IRQ level in DT binding example

has been applied to the asoc tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

From: Adam Thomson <[email protected]>
Date: Fri, 17 Nov 2017 15:09:28 +0000
Subject: [PATCH] ASoC: da7218: Correct IRQ level in DT binding example

Current DT binding documentation shows an example where the IRQ for the device is chosen to be ACTIVE_HIGH. This is incorrect as the device only supports ACTIVE_LOW, so this commit fixes that discrepancy.

---
 Documentation/devicetree/bindings/sound/da7218.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 5ca5a709b6aa..3ab9dfef38d1 100644
@@ -73,7 +73,7 @@ Example:
 		compatible = "dlg,da7218";
 		reg = <0x1a>;
 		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		wakeup-source;
 
 		VDD-supply = <&reg_audio>;

2.15.0