regulator: pfuze100: Switch to SPDX identifier
PATCH 1/5 regulator: pfuze100: Switch to SPDX identifier
From: Fabio Estevam <[email protected]>
Adopt the SPDX license identifier headers to ease license compliance management.
--- drivers/regulator/pfuze100-regulator.c | 21 ++++----------------- 1 file changed, 4 insertions(+), 17 deletions(-)
drivers/regulator/pfuze100-regulator.c +4 -17
@@ -1,20 +1,7 @@ -/* -* Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved. -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License as published by -* the Free Software Foundation; either version 2 of the License, or -* (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved. +#include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h>
Signature · 1 line
2.7.4
PATCH 2/5 regulator: anatop: Switch to SPDX identifier
From: Fabio Estevam <[email protected]>
Adopt the SPDX license identifier headers to ease license compliance management.
--- drivers/regulator/anatop-regulator.c | 22 +++------------------- 1 file changed, 3 insertions(+), 19 deletions(-)
drivers/regulator/anatop-regulator.c +3 -19
@@ -1,22 +1,6 @@ -/* -* Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. -*/ - -/* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License as published by -* the Free Software Foundation; either version 2 of the License, or -* (at your option) any later version. - -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. - -* You should have received a copy of the GNU General Public License along -* with this program; if not, write to the Free Software Foundation, Inc., -* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. -*/ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. #include <linux/slab.h> #include <linux/device.h>
Signature · 1 line
2.7.4
Mark Brown
maintainerApplied "regulator: anatop: Switch to SPDX identifier" to the regulator tree
The patch
regulator: anatop: Switch to SPDX identifier
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
Quoted 1 line
From
c07bbfe70263a443a59ec20f1af87af469a1e5b2Mon Sep 17 00:00:00 2001
From: Fabio Estevam <[email protected]>
Date: Wed, 23 May 2018 16:17:35 -0300
Subject: [PATCH] regulator: anatop: Switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance management.
--- drivers/regulator/anatop-regulator.c | 22 +++------------------- 1 file changed, 3 insertions(+), 19 deletions(-)
drivers/regulator/anatop-regulator.c +3 -19
@@ -1,22 +1,6 @@ -/* -* Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. -*/ - -/* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License as published by -* the Free Software Foundation; either version 2 of the License, or -* (at your option) any later version. - -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. - -* You should have received a copy of the GNU General Public License along -* with this program; if not, write to the Free Software Foundation, Inc., -* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. -*/ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. #include <linux/slab.h> #include <linux/device.h>
Signature · 1 line
2.17.0
PATCH 3/5 regulator: mc13783: Switch to SPDX identifier
In reply to Fabio EstevamFrom: Fabio Estevam <[email protected]>
Adopt the SPDX license identifier headers to ease license compliance management.
--- drivers/regulator/mc13783-regulator.c | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-)
drivers/regulator/mc13783-regulator.c +7 -11
@@ -1,14 +1,10 @@ -/* -* Regulator Driver for Freescale MC13783 PMIC -* -* Copyright 2010 Yong Shen <[email protected]> -* Copyright (C) 2008 Sascha Hauer, Pengutronix <[email protected]> -* Copyright 2009 Alberto Panizzo <[email protected]> -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Regulator Driver for Freescale MC13783 PMIC +// +// Copyright 2010 Yong Shen <[email protected]> +// Copyright (C) 2008 Sascha Hauer, Pengutronix <[email protected]> +// Copyright 2009 Alberto Panizzo <[email protected]> #include <linux/mfd/mc13783.h> #include <linux/regulator/machine.h>
Signature · 1 line
2.7.4
Mark Brown
maintainerApplied "regulator: mc13783: Switch to SPDX identifier" to the regulator tree
The patch
regulator: mc13783: Switch to SPDX identifier
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
Quoted 1 line
From
acd70ba4354684d77dc06309a16540fe60f24835Mon Sep 17 00:00:00 2001
From: Fabio Estevam <[email protected]>
Date: Wed, 23 May 2018 16:17:36 -0300
Subject: [PATCH] regulator: mc13783: Switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance management.
--- drivers/regulator/mc13783-regulator.c | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-)
drivers/regulator/mc13783-regulator.c +7 -11
@@ -1,14 +1,10 @@ -/* -* Regulator Driver for Freescale MC13783 PMIC -* -* Copyright 2010 Yong Shen <[email protected]> -* Copyright (C) 2008 Sascha Hauer, Pengutronix <[email protected]> -* Copyright 2009 Alberto Panizzo <[email protected]> -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Regulator Driver for Freescale MC13783 PMIC +// +// Copyright 2010 Yong Shen <[email protected]> +// Copyright (C) 2008 Sascha Hauer, Pengutronix <[email protected]> +// Copyright 2009 Alberto Panizzo <[email protected]> #include <linux/mfd/mc13783.h> #include <linux/regulator/machine.h>
Signature · 1 line
2.17.0
PATCH 4/5 regulator: mc13892: Switch to SPDX identifier
In reply to Fabio EstevamFrom: Fabio Estevam <[email protected]>
Adopt the SPDX license identifier headers to ease license compliance management.
--- drivers/regulator/mc13892-regulator.c | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-)
drivers/regulator/mc13892-regulator.c +7 -11
@@ -1,14 +1,10 @@ -/* -* Regulator Driver for Freescale MC13892 PMIC -* -* Copyright 2010 Yong Shen <[email protected]> -* -* Based on draft driver from Arnaud Patard <[email protected]> -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Regulator Driver for Freescale MC13892 PMIC +// +// Copyright 2010 Yong Shen <[email protected]> +// +// Based on draft driver from Arnaud Patard <[email protected]> #include <linux/mfd/mc13892.h> #include <linux/regulator/machine.h>
Signature · 1 line
2.7.4
Mark Brown
maintainerApplied "regulator: mc13892: Switch to SPDX identifier" to the regulator tree
The patch
regulator: mc13892: Switch to SPDX identifier
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
Quoted 1 line
From
0f56839902fedfb95cb00d30342dd0ce5a69f7c3Mon Sep 17 00:00:00 2001
From: Fabio Estevam <[email protected]>
Date: Wed, 23 May 2018 16:17:37 -0300
Subject: [PATCH] regulator: mc13892: Switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance management.
--- drivers/regulator/mc13892-regulator.c | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-)
drivers/regulator/mc13892-regulator.c +7 -11
@@ -1,14 +1,10 @@ -/* -* Regulator Driver for Freescale MC13892 PMIC -* -* Copyright 2010 Yong Shen <[email protected]> -* -* Based on draft driver from Arnaud Patard <[email protected]> -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Regulator Driver for Freescale MC13892 PMIC +// +// Copyright 2010 Yong Shen <[email protected]> +// +// Based on draft driver from Arnaud Patard <[email protected]> #include <linux/mfd/mc13892.h> #include <linux/regulator/machine.h>
Signature · 1 line
2.17.0
PATCH 5/5 regulator: mc13xxx-core: Switch to SPDX identifier
In reply to Fabio EstevamFrom: Fabio Estevam <[email protected]>
Adopt the SPDX license identifier headers to ease license compliance management.
--- drivers/regulator/mc13xxx-regulator-core.c | 28 ++++++++++++---------------- 1 file changed, 12 insertions(+), 16 deletions(-)
drivers/regulator/mc13xxx-regulator-core.c +12 -16
@@ -1,19 +1,15 @@ -/* -* Regulator Driver for Freescale MC13xxx PMIC -* -* Copyright 2010 Yong Shen <[email protected]> -* -* Based on mc13783 regulator driver : -* Copyright (C) 2008 Sascha Hauer, Pengutronix <[email protected]> -* Copyright 2009 Alberto Panizzo <[email protected]> -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -* -* Regs infos taken from mc13xxx drivers from freescale and mc13xxx.pdf file -* from freescale -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Regulator Driver for Freescale MC13xxx PMIC +// +// Copyright 2010 Yong Shen <[email protected]> +// +// Based on mc13783 regulator driver : +// Copyright (C) 2008 Sascha Hauer, Pengutronix <[email protected]> +// Copyright 2009 Alberto Panizzo <[email protected]> +// +// Regs infos taken from mc13xxx drivers from freescale and mc13xxx.pdf file +// from freescale #include <linux/mfd/mc13xxx.h> #include <linux/regulator/machine.h>
Signature · 1 line
2.7.4
Mark Brown
maintainerApplied "regulator: mc13xxx-core: Switch to SPDX identifier" to the regulator tree
The patch
regulator: mc13xxx-core: Switch to SPDX identifier
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
Quoted 1 line
From
910adc0e1bf50cc4c9eddf1d8764e6fe4055adf4Mon Sep 17 00:00:00 2001
From: Fabio Estevam <[email protected]>
Date: Wed, 23 May 2018 16:17:38 -0300
Subject: [PATCH] regulator: mc13xxx-core: Switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance management.
--- drivers/regulator/mc13xxx-regulator-core.c | 28 ++++++++++------------ 1 file changed, 12 insertions(+), 16 deletions(-)
drivers/regulator/mc13xxx-regulator-core.c +12 -16
@@ -1,19 +1,15 @@ -/* -* Regulator Driver for Freescale MC13xxx PMIC -* -* Copyright 2010 Yong Shen <[email protected]> -* -* Based on mc13783 regulator driver : -* Copyright (C) 2008 Sascha Hauer, Pengutronix <[email protected]> -* Copyright 2009 Alberto Panizzo <[email protected]> -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -* -* Regs infos taken from mc13xxx drivers from freescale and mc13xxx.pdf file -* from freescale -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Regulator Driver for Freescale MC13xxx PMIC +// +// Copyright 2010 Yong Shen <[email protected]> +// +// Based on mc13783 regulator driver : +// Copyright (C) 2008 Sascha Hauer, Pengutronix <[email protected]> +// Copyright 2009 Alberto Panizzo <[email protected]> +// +// Regs infos taken from mc13xxx drivers from freescale and mc13xxx.pdf file +// from freescale #include <linux/mfd/mc13xxx.h> #include <linux/regulator/machine.h>
Signature · 1 line
2.17.0
Mark Brown
maintainerApplied "regulator: pfuze100: Switch to SPDX identifier" to the regulator tree
In reply to Fabio EstevamThe patch
regulator: pfuze100: Switch to SPDX identifier
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
Quoted 1 line
From
809858cd44c5e28a95fcba953d8ddf58ab53180cMon Sep 17 00:00:00 2001
From: Fabio Estevam <[email protected]>
Date: Wed, 23 May 2018 16:17:34 -0300
Subject: [PATCH] regulator: pfuze100: Switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance management.
--- drivers/regulator/pfuze100-regulator.c | 21 ++++----------------- 1 file changed, 4 insertions(+), 17 deletions(-)
drivers/regulator/pfuze100-regulator.c +4 -17
@@ -1,20 +1,7 @@ -/* -* Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved. -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License as published by -* the Free Software Foundation; either version 2 of the License, or -* (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved. +#include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h>
Signature · 1 line
2.17.0