arm64: dts: uDPU: remove i2c-fast-mode
Subsystems (3)
PATCH 2/2 arm64: dts: uDPU: remove i2c-fast-mode
The I2C bus violates the timing specifications when run in fast mode on the uDPU, so switch to 100kHz mode.
Signed-off-by Russell King <[email protected]>
--- arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts | 2 ++ 1 file changed, 2 insertions(+)
arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts +2 -0
@@ -119,12 +119,14 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; + /delete-property/mrvl,i2c-fast-mode; }; &i2c1 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins>; + /delete-property/mrvl,i2c-fast-mode; lm75@48 { status = "okay";
Signature · 1 line
2.20.1
Gregory CLEMENT
maintainerQuoted 4 lines · Russell King
The I2C bus violates the timing specifications when run in fast mode on the uDPU, so switch to 100kHz mode.
Signed-off-by Russell King <[email protected]>
Applied on mvebu/dt64
Thanks,
Gregory
Quoted 26 lines
--- arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts | 2 ++ 1 file changed, 2 insertions(+)arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts +2
-0@@ -119,12 +119,14 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; + /delete-property/mrvl,i2c-fast-mode; }; &i2c1 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins>; + /delete-property/mrvl,i2c-fast-mode; lm75@48 { status = "okay";Signature · 1 line
2.20.1
Signature · 3 lines
Gregory Clement, Bootlin Embedded Linux and Kernel engineering http://bootlin.com