9pfs: disable msize warning for synth driver
PATCH 1/1 9pfs: disable msize warning for synth driver
Previous patch introduced a performance warning being logged on host side if client connected with an 'msize' <= 8192. Disable this performance warning for the synth driver to prevent that warning from being printed whenever the 9pfs (qtest) test cases are running.
Introduce a new export flag V9FS_NO_PERF_WARN for that purpose, which might also be used to disable such warnings from the CLI in future.
We could have also prevented the warning by simply raising P9_MAX_SIZE in virtio-9p-test.c to any value larger than 8192, however in the context of test cases it makes sense running for edge cases, which includes the lowest 'msize' value supported by the server which is 4096, hence we want to preserve an msize of 4096 for the test client.
--- fsdev/file-op-9p.h | 4 ++++ hw/9pfs/9p-synth.c | 2 ++ hw/9pfs/9p.c | 2 +- 3 files changed, 7 insertions(+), 1 deletion(-)
fsdev/file-op-9p.h +4 -0
@@ -64,6 +64,10 @@ typedef struct ExtendedOps {*/ #define V9FS_REMAP_INODES 0x00000200#define V9FS_FORBID_MULTIDEVS 0x00000400 +/* +* Disables certain performance warnings from being logged on host side. +*/ +#define V9FS_NO_PERF_WARN 0x00000800#define V9FS_SEC_MASK 0x0000003C
hw/9pfs/9p-synth.c +2 -0
@@ -541,6 +541,8 @@ static int synth_init(FsContext *ctx, Error **errp)QLIST_INIT (&synth_root.child);qemu_mutex_init (&synth_mutex); + ctx->export_flags |=V9FS_NO_PERF_WARN ; +/* Add "." and ".." entries for root */ v9fs_add_dir_node (&synth_root, synth_root.attr->mode,".." , synth_root.attr, synth_root.attr->inode);
hw/9pfs/9p.c +1 -1
@@ -1354,7 +1354,7 @@ static void coroutine_fn v9fs_version(void *opaque) }/* 8192 is the default msize of Linux clients */ -if (s->msize <=8192 ) { +if (s->msize <=8192 && !(s->ctx.export_flags &V9FS_NO_PERF_WARN )) {warn_report_once ("9p: degraded performance: a reasonable high msize should be " "chosen on client/guest side (chosen msize is <= 8192). See "
Signature · 1 line
2.20.1
Quoted 8 lines · On Sun, 6 Sep 2020 18:50:32 +0200 Christian Schoenebeck…
Previous patch introduced a performance warning being logged on host side if client connected with an 'msize' <= 8192. Disable this performance warning for the synth driver to prevent that warning from being printed whenever the 9pfs (qtest) test cases are running.
Introduce a new export flag
V9FS_NO_PERF_WARNfor that purpose, which might also be used to disable such warnings from the CLI in future.
Quoted 8 lines
We could have also prevented the warning by simply raising
P9_MAX_SIZEinvirtio-9p-test.cto any value larger than 8192, however in the context of test cases it makes sense running for edge cases, which includes the lowest 'msize' value supported by the server which is 4096, hence we want to preserve an msize of 4096 for the test client.Signed-off-by Christian Schoenebeck <[email protected]>---
Heh, yes I guess it makes sense :)
I guess you could maybe queue this patch before the other one.
Quoted 46 lines
fsdev/file-op-9p.h | 4 ++++ hw/9pfs/9p-synth.c | 2 ++ hw/9pfs/9p.c | 2 +- 3 files changed, 7 insertions(+), 1 deletion(-)fsdev/file-op-9p.h +4
-0@@ -64,6 +64,10 @@ typedef struct ExtendedOps {*/ #define V9FS_REMAP_INODES 0x00000200#define V9FS_FORBID_MULTIDEVS 0x00000400 +/* +* Disables certain performance warnings from being logged on host side. +*/ +#define V9FS_NO_PERF_WARN 0x00000800#define V9FS_SEC_MASK 0x0000003Chw/9pfs/9p-synth.c +2
-0@@ -541,6 +541,8 @@ static int synth_init(FsContext *ctx, Error **errp)QLIST_INIT (&synth_root.child);qemu_mutex_init (&synth_mutex); + ctx->export_flags |=V9FS_NO_PERF_WARN ; +/* Add "." and ".." entries for root */ v9fs_add_dir_node (&synth_root, synth_root.attr->mode,".." , synth_root.attr, synth_root.attr->inode);hw/9pfs/9p.c +1
-1@@ -1354,7 +1354,7 @@ static void coroutine_fn v9fs_version(void *opaque) }/* 8192 is the default msize of Linux clients */ -if (s->msize <=8192 ) { +if (s->msize <=8192 && !(s->ctx.export_flags &V9FS_NO_PERF_WARN )) {warn_report_once ("9p: degraded performance: a reasonable high msize should be " "chosen on client/guest side (chosen msize is <= 8192). See "
Quoted 17 lines · On Montag, 7. September 2020 11:57:58 CEST Greg Kurz wrote:
On Sun, 6 Sep 2020 18:50:32 +0200
Quoted 14 lines · Christian Schoenebeck
Previous patch introduced a performance warning being logged on host side if client connected with an 'msize' <= 8192. Disable this performance warning for the synth driver to prevent that warning from being printed whenever the 9pfs (qtest) test cases are running.
Introduce a new export flag
V9FS_NO_PERF_WARNfor that purpose, which might also be used to disable such warnings from the CLI in future.We could have also prevented the warning by simply raising
P9_MAX_SIZEinvirtio-9p-test.cto any value larger than 8192, however in the context of test cases it makes sense running for edge cases, which includes the lowest 'msize' value supported by the server which is 4096, hence we want to preserve an msize of 4096 for the test client.
Quoted 8 lines
Quoted 2 lines
Signed-off-by Christian Schoenebeck <[email protected]>---
Heh, yes I guess it makes sense :)
I guess you could maybe queue this patch before the other one.
Reviewed-by Greg Kurz <[email protected]>
Thanks!
BTW, have you ever tried dealing with patchwork client's 'state' feature for already transmited patches on the list (new, rejected, etc.)?
Not that there were many 9p patches for actually needing that; just curious if that's an LKML only feature.
Best regards,
Christian Schoenebeck
Quoted 23 lines · On Mon, 07 Sep 2020 13:55:52 +0200 Christian Schoenebeck…
Quoted 22 lines · On Montag, 7. September 2020 11:57:58 CEST Greg Kurz wrote:
On Sun, 6 Sep 2020 18:50:32 +0200
Quoted 8 lines · Christian Schoenebeck
Previous patch introduced a performance warning being logged on host side if client connected with an 'msize' <= 8192. Disable this performance warning for the synth driver to prevent that warning from being printed whenever the 9pfs (qtest) test cases are running.
Introduce a new export flag
V9FS_NO_PERF_WARNfor that purpose, which might also be used to disable such warnings from the CLI in future.Quoted 8 lines
We could have also prevented the warning by simply raising
P9_MAX_SIZEinvirtio-9p-test.cto any value larger than 8192, however in the context of test cases it makes sense running for edge cases, which includes the lowest 'msize' value supported by the server which is 4096, hence we want to preserve an msize of 4096 for the test client.Signed-off-by Christian Schoenebeck <[email protected]>---
Heh, yes I guess it makes sense :)
Quoted 9 lines
Quoted 3 lines
I guess you could maybe queue this patch before the other one.
Reviewed-by Greg Kurz <[email protected]>Thanks!
BTW, have you ever tried dealing with patchwork client's 'state' feature for already transmited patches on the list (new, rejected, etc.)?
Nope, never used patchwork's state at all and I've no idea on how it works... but I can ask to my former IBM colleagues at Ozlabs.
Quoted 7 lines
Not that there were many 9p patches for actually needing that; just curious if that's an LKML only feature.
Best regards,
Christian Schoenebeck
Quoted 30 lines · On Mon, 7 Sep 2020 14:27:19 +0200 Greg Kurz <[email protected]> wrote:
Quoted 27 lines · On Mon, 07 Sep 2020 13:55:52 +0200 Christian Schoenebeck…
Quoted 25 lines · On Montag, 7. September 2020 11:57:58 CEST Greg Kurz wrote:
On Sun, 6 Sep 2020 18:50:32 +0200
Quoted 8 lines · Christian Schoenebeck
Previous patch introduced a performance warning being logged on host side if client connected with an 'msize' <= 8192. Disable this performance warning for the synth driver to prevent that warning from being printed whenever the 9pfs (qtest) test cases are running.
Introduce a new export flag
V9FS_NO_PERF_WARNfor that purpose, which might also be used to disable such warnings from the CLI in future.Quoted 8 lines
We could have also prevented the warning by simply raising
P9_MAX_SIZEinvirtio-9p-test.cto any value larger than 8192, however in the context of test cases it makes sense running for edge cases, which includes the lowest 'msize' value supported by the server which is 4096, hence we want to preserve an msize of 4096 for the test client.Signed-off-by Christian Schoenebeck <[email protected]>---
Heh, yes I guess it makes sense :)
I guess you could maybe queue this patch before the other one.
Reviewed-by Greg Kurz <[email protected]>
Quoted 9 lines
Quoted 5 lines
Thanks!
BTW, have you ever tried dealing with patchwork client's 'state' feature for already transmited patches on the list (new, rejected, etc.)?
Nope, never used patchwork's state at all and I've no idea on how it works... but I can ask to my former IBM colleagues at Ozlabs.
It seems that you need to be a "maintainer" from a patchwork standpoint to manipulate patch states.
https://patchwork.readthedocs.io/en/latest/usage/overview/#maintainers
===========
Maintainers
Maintainers are a special type of user that with permissions to do certain operations that regular Patchwork users can’t. Patchwork maintainers usually have a 1:1 mapping with a project’s code maintainers though this is not necessary.
The operations that a maintainer can invoke include:
Change the state of a patch
Archive a patch
Delegate a patch, or be delegated a patch
===========
No clue how to upgrade to maintainer though...
Quoted 8 lines
Quoted 7 lines
Not that there were many 9p patches for actually needing that; just curious if that's an LKML only feature.
Best regards,
Christian Schoenebeck
Quoted 19 lines · On Dienstag, 8. September 2020 10:10:36 CEST Greg Kurz wrote:
Quoted 5 lines
Quoted 2 lines
BTW, have you ever tried dealing with patchwork client's 'state' feature for already transmited patches on the list (new, rejected, etc.)?
Nope, never used patchwork's state at all and I've no idea on how it works... but I can ask to my former IBM colleagues at Ozlabs.
It seems that you need to be a "maintainer" from a patchwork standpoint to manipulate patch states.
https://patchwork.readthedocs.io/en/latest/usage/overview/#maintainers
===========
MaintainersMaintainers are a special type of user that with permissions to do certain operations that regular Patchwork users can’t. Patchwork maintainers usually have a 1:1 mapping with a project’s code maintainers though this is not necessary.
Quoted 8 lines
The operations that a maintainer can invoke include:
Change the state of a patch
Archive a patch
Delegate a patch, or be delegated a patch
===========No clue how to upgrade to maintainer though...
The command to change a patch state is, e.g.:
pwclient update -s Queued 11759645
When I do that I get this error:
The update action requires authentication, but no username or password is configured
So looks like it would require somebody to create an account somewhere, wherever that is.
Best regards,
Christian Schoenebeck
Quoted 33 lines · On Tue, 08 Sep 2020 11:01:15 +0200 Christian Schoenebeck…
Quoted 19 lines · On Dienstag, 8. September 2020 10:10:36 CEST Greg Kurz wrote:
Quoted 5 lines
Quoted 2 lines
BTW, have you ever tried dealing with patchwork client's 'state' feature for already transmited patches on the list (new, rejected, etc.)?
Nope, never used patchwork's state at all and I've no idea on how it works... but I can ask to my former IBM colleagues at Ozlabs.
It seems that you need to be a "maintainer" from a patchwork standpoint to manipulate patch states.
https://patchwork.readthedocs.io/en/latest/usage/overview/#maintainers
===========
MaintainersMaintainers are a special type of user that with permissions to do certain operations that regular Patchwork users can’t. Patchwork maintainers usually have a 1:1 mapping with a project’s code maintainers though this is not necessary.
Quoted 8 lines
The operations that a maintainer can invoke include:
Change the state of a patch
Archive a patch
Delegate a patch, or be delegated a patch
===========No clue how to upgrade to maintainer though...
The command to change a patch state is, e.g.:
pwclient update -s Queued 11759645
Quoted 8 lines
When I do that I get this error:
The update action requires authentication, but no username or password is configured
So looks like it would require somebody to create an account somewhere, wherever that is.
Which patchwork site are you using ?
https://patchwork.ozlabs.org/ or https://patchwork.kernel.org/ ?
Anyway, both support self account creation:
https://patchwork.ozlabs.org/register/
https://patchwork.kernel.org/register/
This allows you to update your own patches, but you need to be maintainer to update other's.
Quoted 4 lines
Best regards,
Christian Schoenebeck
Quoted 47 lines · On Dienstag, 8. September 2020 11:34:28 CEST Greg Kurz wrote:
On Tue, 08 Sep 2020 11:01:15 +0200
Quoted 31 lines · Christian Schoenebeck
Quoted 20 lines · On Dienstag, 8. September 2020 10:10:36 CEST Greg Kurz wrote:
Quoted 6 lines
Quoted 3 lines
BTW, have you ever tried dealing with patchwork client's 'state' feature
for already transmited patches on the list (new, rejected, etc.)?Nope, never used patchwork's state at all and I've no idea on how it works... but I can ask to my former IBM colleagues at Ozlabs.
It seems that you need to be a "maintainer" from a patchwork standpoint to manipulate patch states.
https://patchwork.readthedocs.io/en/latest/usage/overview/#maintainers
===========
MaintainersMaintainers are a special type of user that with permissions to do certain operations that regular Patchwork users can’t. Patchwork maintainers usually have a 1:1 mapping with a project’s code maintainers though this is not necessary.
Quoted 8 lines
The operations that a maintainer can invoke include:
Change the state of a patch
Archive a patch
Delegate a patch, or be delegated a patch===========
No clue how to upgrade to maintainer though...
The command to change a patch state is, e.g.:
Quoted 8 lines
pwclient update -s Queued 11759645When I do that I get this error:
The update action requires authentication, but no username or password is configuredSo looks like it would require somebody to create an account somewhere, wherever that is.
Which patchwork site are you using ?
https://patchwork.ozlabs.org/ or https://patchwork.kernel.org/ ?
Quoted 8 lines
Anyway, both support self account creation:
https://patchwork.ozlabs.org/register/
https://patchwork.kernel.org/register/
This allows you to update your own patches, but you need to be maintainer to update other's.
Currently there are 3 maintainers registered for the QEMU patchwork project on ozlabs.org:
https://patchwork.ozlabs.org/api/1.0/projects/14/
None for qemu on kernel.org:
https://patchwork.kernel.org/api/1.0/projects/301/
My other test, setting state by email header didn't work BTW.
Best regards,
Christian Schoenebeck
Quoted 33 lines · On Dienstag, 8. September 2020 12:03:35 CEST Christian Schoenebeck wrote:
Quoted 32 lines · On Dienstag, 8. September 2020 11:34:28 CEST Greg Kurz wrote:
On Tue, 08 Sep 2020 11:01:15 +0200
Quoted 29 lines · Christian Schoenebeck
Quoted 28 lines · On Dienstag, 8. September 2020 10:10:36 CEST Greg Kurz wrote:
Quoted 6 lines
Quoted 3 lines
BTW, have you ever tried dealing with patchwork client's 'state' feature
for already transmited patches on the list (new, rejected, etc.)?Nope, never used patchwork's state at all and I've no idea on how it works... but I can ask to my former IBM colleagues at Ozlabs.
It seems that you need to be a "maintainer" from a patchwork standpoint
to manipulate patch states.https://patchwork.readthedocs.io/en/latest/usage/overview/#maintainers
===========
MaintainersMaintainers are a special type of user that with permissions to do certain operations that regular Patchwork users can’t. Patchwork maintainers usually have a 1:1 mapping with a project’s code maintainers though this is not necessary.
The operations that a maintainer can invoke include:
Change the state of a patch
Archive a patch
Delegate a patch, or be delegated a patch===========
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 1 line
No clue how to upgrade to maintainer though...
The command to change a patch state is, e.g.:
pwclient update -s Queued 11759645When I do that I get this error:
The update action requires authentication, but no username or
password
Quoted 21 lines
Quoted 9 lines
Quoted 4 lines
is configured
So looks like it would require somebody to create an account somewhere, wherever that is.
Which patchwork site are you using ?
https://patchwork.ozlabs.org/ or https://patchwork.kernel.org/ ?
Quoted 8 lines
Anyway, both support self account creation:
https://patchwork.ozlabs.org/register/
https://patchwork.kernel.org/register/
This allows you to update your own patches, but you need to be maintainer to update other's.
Currently there are 3 maintainers registered for the QEMU patchwork project on ozlabs.org:
Quoted 7 lines
https://patchwork.ozlabs.org/api/1.0/projects/14/None for qemu on kernel.org:
https://patchwork.kernel.org/api/1.0/projects/301/My other test, setting state by email header didn't work BTW.
Looks like adding/removing maintainers is done by first getting the project's current json data, e.g.:
https://patchwork.ozlabs.org/api/1.0/projects/14/
and then HTTP putting the (entire) modified json data with updated "maintainers" field:
PUT /api/1.0/projects/14/ HTTP/1.1
Host: patchwork.ozlabs.org
Content-Type: application/json
{
<json-data-here>
}or by just sending the updated "maintainers" json field with HTTP "PATCH" command instead:
PATCH /api/1.0/projects/14/ HTTP/1.1
Host: patchwork.ozlabs.org
Content-Type: application/json
{
"maintainers": ...
}As documented here:
https://patchwork.readthedocs.io/_/downloads/en/latest/pdf/
[page 90, 92]
As far as I can see, this is currently not implemented in the client. So that's manual, raw HTTP handling. No word in the docs though whether it's sufficient being a project maintainer for doing that, or if you even need to have a patchwork admin account.
And unfortunately patchwork does not seem to have a concept of submaintainers, so it seems to be all-or-nothing.
Best regards,
Christian Schoenebeck
Quoted 6 lines · On Dienstag, 8. September 2020 11:01:15 CEST Christian Schoenebeck wrote:
The command to change a patch state is, e.g.:
pwclient update -s Queued 11759645When I do that I get this error:
Quoted 8 lines
The update action requires authentication, but no username or password is configured
So looks like it would require somebody to create an account somewhere, wherever that is.
Best regards,
Christian Schoenebeck
This is just a test email to set patch state by X-Patchwork-State header, as documented here:
https://patchwork.readthedocs.io/_/downloads/en/latest/pdf/
Best regards,
Christian Schoenebeck