net: pcs: lynx: consolidate gigabit code
Subsystems (5)
Russell King (Oracle)
maintainercover net: pcs: lynx: consolidate gigabit code
Hi,
This series consolidates the gigabit setup code in the Lynx PCS driver. In order to do this properly, we first need to fix phylink's advertisement encoding function to handle QSGMII.
I'd be grateful if someone can test this please.
Thanks.
drivers/net/pcs/pcs-lynx.c | 56 +++++++++++++++++----------------------------- drivers/net/phy/phylink.c | 1 + 2 files changed, 22 insertions(+), 35 deletions(-)
Signature · 2 lines
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
PATCH 1/2 net: phylink: add QSGMII support to phylink_mii_c22_pcs_encode_advertisement()
The QSGMII MAC-to-PHY reply is the same as the SGMII MAC-to-PHY reply. Add support for this to phylink_mii_c22_pcs_encode_advertisement().
--- drivers/net/phy/phylink.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/phy/phylink.c +1 -0
@@ -2991,6 +2991,7 @@ int phylink_mii_c22_pcs_encode_advertisement(phy_interface_t interface, adv |=ADVERTISE_1000XPSE_ASYM ;return adv;case PHY_INTERFACE_MODE_SGMII : +case PHY_INTERFACE_MODE_QSGMII :return 0x0001 ;default :/* Nothing to do for other modes */
Signature · 1 line
2.30.2
PATCH 2/2 net: pcs: lynx: consolidate sgmii and 1000base-x config code
In reply to Russell King (Oracle)Consolidate lynx_pcs_config_1000basex() and lynx_pcs_config_sgmii() into a single function. The differences between these two are:
- The value that the link timer is set to.
- The value of the IF_MODE register.
Everything else is identical.
This patch depends on "net: phylink: add QSGMII support to phylink_mii_c22_pcs_encode_advertisement()".
--- drivers/net/pcs/pcs-lynx.c | 56 ++++++++++++++------------------------ 1 file changed, 21 insertions(+), 35 deletions(-)
drivers/net/pcs/pcs-lynx.c +21 -35
@@ -122,53 +122,39 @@ static void lynx_pcs_get_state(struct phylink_pcs *pcs, state->link, state->an_enabled, state->an_complete); } -static int lynx_pcs_config_1000basex (struct mdio_device *pcs, -unsigned int mode, -const unsigned long *advertising) +static int lynx_pcs_config_giga (struct mdio_device *pcs,unsigned int mode, +phy_interface_t interface, +const unsigned long *advertising) {u32 link_timer; -int err; - - link_timer =LINK_TIMER_VAL (IEEE8023_LINK_TIMER_NS ); -mdiodev_write (pcs,LINK_TIMER_LO , link_timer &0xffff ); -mdiodev_write (pcs,LINK_TIMER_HI , link_timer >>16 ); - - err =mdiodev_modify (pcs,IF_MODE , -IF_MODE_SGMII_EN |IF_MODE_USE_SGMII_AN , -0 ); -if (err) -return err; - -return phylink_mii_c22_pcs_config (pcs, mode, -PHY_INTERFACE_MODE_1000BASEX , - advertising); -} - -static int lynx_pcs_config_sgmii (struct mdio_device *pcs,unsigned int mode, -const unsigned long *advertising) -{u16 if_mode;int err; - if_mode =IF_MODE_SGMII_EN ; -if (mode ==MLO_AN_INBAND ) { -u32 link_timer; - - if_mode |=IF_MODE_USE_SGMII_AN ; - -/* Adjust link timer for SGMII */ - link_timer =LINK_TIMER_VAL (SGMII_AN_LINK_TIMER_NS ); +if (interface ==PHY_INTERFACE_MODE_1000BASEX ) { + link_timer =LINK_TIMER_VAL (IEEE8023_LINK_TIMER_NS );mdiodev_write (pcs,LINK_TIMER_LO , link_timer &0xffff );mdiodev_write (pcs,LINK_TIMER_HI , link_timer >>16 ); + + if_mode =0 ; + }else { + if_mode =IF_MODE_SGMII_EN ; +if (mode ==MLO_AN_INBAND ) { + if_mode |=IF_MODE_USE_SGMII_AN ; + +/* Adjust link timer for SGMII */ + link_timer =LINK_TIMER_VAL (SGMII_AN_LINK_TIMER_NS ); +mdiodev_write (pcs,LINK_TIMER_LO , link_timer &0xffff ); +mdiodev_write (pcs,LINK_TIMER_HI , link_timer >>16 ); + } } + err =mdiodev_modify (pcs,IF_MODE ,IF_MODE_SGMII_EN |IF_MODE_USE_SGMII_AN , if_mode);if (err)return err; -return phylink_mii_c22_pcs_config (pcs, mode,PHY_INTERFACE_MODE_SGMII , - advertising); +return phylink_mii_c22_pcs_config (pcs, mode, interface, advertising); } static int lynx_pcs_config_usxgmii(struct mdio_device *pcs, unsigned int mode,
@@ -198,10 +184,10 @@ static int lynx_pcs_config(struct phylink_pcs *pcs, unsigned int mode,switch (ifmode) {case PHY_INTERFACE_MODE_1000BASEX : -return lynx_pcs_config_1000basex (lynx->mdio, mode, advertising);case PHY_INTERFACE_MODE_SGMII :case PHY_INTERFACE_MODE_QSGMII : -return lynx_pcs_config_sgmii (lynx->mdio, mode, advertising); +return lynx_pcs_config_giga (lynx->mdio, mode, ifmode, + advertising);case PHY_INTERFACE_MODE_2500BASEX :if (phylink_autoneg_inband (mode)) { dev_err(&lynx->mdio->dev,
Signature · 1 line
2.30.2
Quoted 9 lines · Russell King (Oracle)
Hi,
This series consolidates the gigabit setup code in the Lynx PCS driver. In order to do this properly, we first need to fix phylink's advertisement encoding function to handle QSGMII.
I'd be grateful if someone can test this please.
Thanks.
Thanks!
This series was applied to netdev/net-next.git (master) by Jakub Kicinski <[email protected]>:
Hello:
This series was applied to netdev/net-next.git (master) by Jakub Kicinski <[email protected]>:
Quoted 9 lines · On Thu, 23 Jun 2022 13:24:44 +0100 you wrote:
Hi,
This series consolidates the gigabit setup code in the Lynx PCS driver. In order to do this properly, we first need to fix phylink's advertisement encoding function to handle QSGMII.
I'd be grateful if someone can test this please.
[...]
Here is the summary with links:
- [net-next,1/2] net: phylink: add QSGMII support to phylink_mii_c22_pcs_encode_advertisement()
https://git.kernel.org/netdev/net-next/c/f56866c486fa - [net-next,2/2] net: pcs: lynx: consolidate sgmii and 1000base-x config code https://git.kernel.org/netdev/net-next/c/06f9a6148e28
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html