Skip to contentSkip to conversation

net: stmmac: qcom-ethqos: more cleanups

PATCH Applied Russell King (Oracle) 4 participants 19 messages Mar 27 – Mar 31

Subsystems (6)
lore
Share & tools
lore
#0 lore raw

v2 cover net: stmmac: qcom-ethqos: more cleanups

Further cleanups to qcom-ethqos, mainly concentrating on the RGMII code, making it clearer what the differences are for each speed, thus making the code more readable.

I'm still not really happy with this. The speed specific configuration remains split between ethqos_fix_mac_speed_rgmii() and ethqos_rgmii_macro_init(), where the latter is only ever called from the former. So, I think further work is needed here - maybe it needs restructuring into the various componenet parts of the RGMII block?

v2:
- patch 2: fix typo in commit message
- patch 3: fix ethqos_fix_mac_speed() comment

 .../ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c    | 220 ++++++++-------------
 1 file changed, 87 insertions(+), 133 deletions(-)
Signature · 2 lines
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
#1 lore raw

PATCH v2 1/15 net: stmmac: qcom-ethqos: remove ethqos_configure()

ethqos_configure() does nothing more than indirect via ethqos->configure_func, and is only called from ethqos_fix_mac_speed() just below. Move the indirect call into ethqos_fix_mac_speed().

---
 drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +1 -7
index 3ccf20fdf52a..502f2b184a87 100644
@@ -623,18 +623,12 @@ static void ethqos_configure_sgmii(struct qcom_ethqos *ethqos,
 	ethqos_pcs_set_inband(priv, interface == PHY_INTERFACE_MODE_SGMII);
 }
 
-static void ethqos_configure(struct qcom_ethqos *ethqos,
-			     phy_interface_t interface, int speed)
-{
-	return ethqos->configure_func(ethqos, interface, speed);
-}
-
 static void ethqos_fix_mac_speed(void *priv, phy_interface_t interface,
 				 int speed, unsigned int mode)
 {
 	struct qcom_ethqos *ethqos = priv;
 
-	ethqos_configure(ethqos, interface, speed);
+	ethqos->configure_func(ethqos, interface, speed);
 }
 
 static int qcom_ethqos_serdes_powerup(struct net_device *ndev, void *priv)
Signature · 1 line
2.47.3
#2 lore raw

PATCH v2 2/15 net: stmmac: qcom-ethqos: pass ethqos to ethqos_pcs_set_inband()

In reply to Russell King (Oracle)

Rather than getting the stmmac_priv pointer in ethqos_configure_sgmii(), move it into ethqos_pcs_set_inband() and pass the struct qcom_ethqos pointer instead.

---
 .../net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c    | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +5 -5
index 502f2b184a87..b9cfcf32cebc 100644
@@ -590,8 +590,11 @@ static void ethqos_configure_rgmii(struct qcom_ethqos *ethqos,
 	ethqos_rgmii_macro_init(ethqos, speed);
 }
 
-static void ethqos_pcs_set_inband(struct stmmac_priv *priv, bool enable)
+static void ethqos_pcs_set_inband(struct qcom_ethqos *ethqos, bool enable)
 {
+	struct net_device *dev = platform_get_drvdata(ethqos->pdev);
+	struct stmmac_priv *priv = netdev_priv(dev);
+
 	stmmac_pcs_ctrl_ane(priv, enable, 0);
 }
 
@@ -601,9 +604,6 @@ static void ethqos_pcs_set_inband(struct stmmac_priv *priv, bool enable)
 static void ethqos_configure_sgmii(struct qcom_ethqos *ethqos,
 				   phy_interface_t interface, int speed)
 {
-	struct net_device *dev = platform_get_drvdata(ethqos->pdev);
-	struct stmmac_priv *priv = netdev_priv(dev);
-
 	switch (speed) {
 	case SPEED_2500:
 	case SPEED_1000:
@@ -620,7 +620,7 @@ static void ethqos_configure_sgmii(struct qcom_ethqos *ethqos,
 		break;
 	}
 
-	ethqos_pcs_set_inband(priv, interface == PHY_INTERFACE_MODE_SGMII);
+	ethqos_pcs_set_inband(ethqos, interface == PHY_INTERFACE_MODE_SGMII);
 }
 
 static void ethqos_fix_mac_speed(void *priv, phy_interface_t interface,
Signature · 1 line
2.47.3
#3 lore raw

PATCH v2 3/15 net: stmmac: qcom-ethqos: eliminate configure_func

In reply to Russell King (Oracle)

Since ethqos_fix_mac_speed() is called via a function pointer, and only indirects via the configure_func function pointer, eliminate this unnecessary indirection.

---
 .../stmicro/stmmac/dwmac-qcom-ethqos.c        | 35 ++++++++-----------
 1 file changed, 15 insertions(+), 20 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +15 -20
index b9cfcf32cebc..f7e3a2b8803f 100644
@@ -100,9 +100,6 @@ struct ethqos_emac_driver_data {
 struct qcom_ethqos {
 	struct platform_device *pdev;
 	void __iomem *rgmii_base;
-	void (*configure_func)(struct qcom_ethqos *ethqos,
-			       phy_interface_t interface, int speed);
-
 	struct clk *link_clk;
 	struct phy *serdes_phy;
 	phy_interface_t phy_mode;
@@ -521,13 +518,17 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 	return 0;
 }
 
-static void ethqos_configure_rgmii(struct qcom_ethqos *ethqos,
-				   phy_interface_t interface, int speed)
+static void ethqos_fix_mac_speed_rgmii(void *bsp_priv,
+				       phy_interface_t interface, int speed,
+				       unsigned int mode)
 {
-	struct device *dev = &ethqos->pdev->dev;
+	struct qcom_ethqos *ethqos = bsp_priv;
+	struct device *dev;
 	unsigned int i;
 	u32 val;
 
+	dev = &ethqos->pdev->dev;
+
 	/* Reset to POR values and enable clk */
 	for (i = 0; i < ethqos->num_rgmii_por; i++)
 		rgmii_writel(ethqos, ethqos->rgmii_por[i].value,
@@ -601,9 +602,12 @@ static void ethqos_pcs_set_inband(struct qcom_ethqos *ethqos, bool enable)
 /* On interface toggle MAC registers gets reset.
  * Configure MAC block for SGMII on ethernet phy link up
  */
-static void ethqos_configure_sgmii(struct qcom_ethqos *ethqos,
-				   phy_interface_t interface, int speed)
+static void ethqos_fix_mac_speed_sgmii(void *bsp_priv,
+				       phy_interface_t interface, int speed,
+				       unsigned int mode)
 {
+	struct qcom_ethqos *ethqos = bsp_priv;
+
 	switch (speed) {
 	case SPEED_2500:
 	case SPEED_1000:
@@ -623,14 +627,6 @@ static void ethqos_configure_sgmii(struct qcom_ethqos *ethqos,
 	ethqos_pcs_set_inband(ethqos, interface == PHY_INTERFACE_MODE_SGMII);
 }
 
-static void ethqos_fix_mac_speed(void *priv, phy_interface_t interface,
-				 int speed, unsigned int mode)
-{
-	struct qcom_ethqos *ethqos = priv;
-
-	ethqos->configure_func(ethqos, interface, speed);
-}
-
 static int qcom_ethqos_serdes_powerup(struct net_device *ndev, void *priv)
 {
 	struct qcom_ethqos *ethqos = priv;
@@ -687,7 +683,7 @@ static int ethqos_clks_config(void *priv, bool enabled)
 		/* Enable functional clock to prevent DMA reset to timeout due
 		 * to lacking PHY clock after the hardware block has been power
 		 * cycled. The actual configuration will be adjusted once
-		 * ethqos_fix_mac_speed() is invoked.
+		 * ethqos' fix_mac_speed() method is invoked.
 		 */
 		qcom_ethqos_set_sgmii_loopback(ethqos, true);
 		ethqos_set_func_clk_en(ethqos);
@@ -753,11 +749,11 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 	case PHY_INTERFACE_MODE_RGMII_ID:
 	case PHY_INTERFACE_MODE_RGMII_RXID:
 	case PHY_INTERFACE_MODE_RGMII_TXID:
-		ethqos->configure_func = ethqos_configure_rgmii;
+		plat_dat->fix_mac_speed = ethqos_fix_mac_speed_rgmii;
 		break;
 	case PHY_INTERFACE_MODE_2500BASEX:
 	case PHY_INTERFACE_MODE_SGMII:
-		ethqos->configure_func = ethqos_configure_sgmii;
+		plat_dat->fix_mac_speed = ethqos_fix_mac_speed_sgmii;
 		plat_dat->mac_finish = ethqos_mac_finish_serdes;
 		break;
 	default:
@@ -805,7 +801,6 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 
 	plat_dat->bsp_priv = ethqos;
 	plat_dat->set_clk_tx_rate = ethqos_set_clk_tx_rate;
-	plat_dat->fix_mac_speed = ethqos_fix_mac_speed;
 	plat_dat->dump_debug_regs = rgmii_dump;
 	plat_dat->ptp_clk_freq_config = ethqos_ptp_clk_freq_config;
 	plat_dat->core_type = DWMAC_CORE_GMAC4;
Signature · 1 line
2.47.3
#4 lore raw

Re: [PATCH net-next v2 03/15] net: stmmac: qcom-ethqos: eliminate configure_func

Quoted 6 lines · Russell King (Oracle)
drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +1 -1
@@ -687,7 +683,7 @@ static int ethqos_clks_config(void *priv, bool enabled)
 		/* Enable functional clock to prevent DMA reset to timeout due
 		 * to lacking PHY clock after the hardware block has been power
 		 * cycled. The actual configuration will be adjusted once
-		 * ethqos_fix_mac_speed() is invoked.
+		 * ethqos' fix_mac_speed() method is invoked.

...

Quoted 2 lines
drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +1 -1
-		ethqos->configure_func = ethqos_configure_rgmii;
+		plat_dat->fix_mac_speed = ethqos_fix_mac_speed_rgmii;

...

drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c static int qcom_ethqos_probe(struct platform_device *pdev) · line 756

Quoted 2 lines
drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +1 -1
-		ethqos->configure_func = ethqos_configure_sgmii;
+		plat_dat->fix_mac_speed = ethqos_fix_mac_speed_sgmii;

AI review of this patch is still complaining about the comment above:

The comment still references 'fix_mac_speed() method' but the function ethqos_fix_mac_speed() was removed in this patch. Should this comment be updated to reference either ethqos_fix_mac_speed_rgmii() or ethqos_fix_mac_speed_sgmii(), or perhaps just 'the fix_mac_speed callback' to remain implementation-agnostic?

Artifical Stupidity at its best! :/

Signature · 2 lines
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
#5 lore raw

PATCH v2 4/15 net: stmmac: qcom-ethqos: move detection of invalid RGMII speed

In reply to Russell King (Oracle)

Move detection of invalid RGMII speeds (which will never be triggered) before the switch() to allow register modifications that are common to all speeds to be moved out of the switch.

---
 drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +5 -3
index f7e3a2b8803f..d19331067459 100644
@@ -397,6 +397,11 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 	/* Select RGMII, write 0 to interface select */
 	rgmii_clrmask(ethqos, RGMII_CONFIG_INTF_SEL, RGMII_IO_MACRO_CONFIG);
 
+	if (speed != SPEED_1000 && speed != SPEED_100 && speed != SPEED_10) {
+		dev_err(dev, "Invalid speed %d\n", speed);
+		return -EINVAL;
+	}
+
 	switch (speed) {
 	case SPEED_1000:
 		rgmii_setmask(ethqos, RGMII_CONFIG_DDR_MODE,
@@ -510,9 +515,6 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 		rgmii_updatel(ethqos, RGMII_CONFIG_LOOPBACK_EN,
 			      loopback, RGMII_IO_MACRO_CONFIG);
 		break;
-	default:
-		dev_err(dev, "Invalid speed %d\n", speed);
-		return -EINVAL;
 	}
 
 	return 0;
Signature · 1 line
2.47.3
#6 lore raw

PATCH v2 5/15 net: stmmac: qcom-ethqos: move RGMII_CONFIG_DDR_MODE

In reply to Russell King (Oracle)

RGMII_CONFIG_DDR_MODE is always set irrespective of the speed. Move this out of the switch.

---
 drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +2 -6
index d19331067459..34d9a6b2d023 100644
@@ -402,10 +402,10 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 		return -EINVAL;
 	}
 
+	rgmii_setmask(ethqos, RGMII_CONFIG_DDR_MODE, RGMII_IO_MACRO_CONFIG);
+
 	switch (speed) {
 	case SPEED_1000:
-		rgmii_setmask(ethqos, RGMII_CONFIG_DDR_MODE,
-			      RGMII_IO_MACRO_CONFIG);
 		rgmii_clrmask(ethqos, RGMII_CONFIG_BYPASS_TX_ID_EN,
 			      RGMII_IO_MACRO_CONFIG);
 		rgmii_setmask(ethqos, RGMII_CONFIG_POS_NEG_DATA_SEL,
@@ -443,8 +443,6 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 		break;
 
 	case SPEED_100:
-		rgmii_setmask(ethqos, RGMII_CONFIG_DDR_MODE,
-			      RGMII_IO_MACRO_CONFIG);
 		rgmii_setmask(ethqos, RGMII_CONFIG_BYPASS_TX_ID_EN,
 			      RGMII_IO_MACRO_CONFIG);
 		rgmii_clrmask(ethqos, RGMII_CONFIG_POS_NEG_DATA_SEL,
@@ -481,8 +479,6 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 		break;
 
 	case SPEED_10:
-		rgmii_setmask(ethqos, RGMII_CONFIG_DDR_MODE,
-			      RGMII_IO_MACRO_CONFIG);
 		rgmii_setmask(ethqos, RGMII_CONFIG_BYPASS_TX_ID_EN,
 			      RGMII_IO_MACRO_CONFIG);
 		rgmii_clrmask(ethqos, RGMII_CONFIG_POS_NEG_DATA_SEL,
Signature · 1 line
2.47.3
#7 lore raw

PATCH v2 6/15 net: stmmac: qcom-ethqos: move 1G vs 100M/10M RGMII settings

In reply to Russell King (Oracle)

Move RGMII_CONFIG_BYPASS_TX_ID_EN, RGMII_CONFIG_POS_NEG_DATA_SEL and RGMII_CONFIG_PROG_SWAP. There are two states for these: one group for 1G, and the logical inversion for 100M and 10M. Move this out of the switch into an if-else clause.

---
 .../stmicro/stmmac/dwmac-qcom-ethqos.c        | 26 +++++++++----------
 1 file changed, 12 insertions(+), 14 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +12 -14
index 34d9a6b2d023..e9d8c8a7146a 100644
@@ -404,14 +404,24 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 
 	rgmii_setmask(ethqos, RGMII_CONFIG_DDR_MODE, RGMII_IO_MACRO_CONFIG);
 
-	switch (speed) {
-	case SPEED_1000:
+	if (speed == SPEED_1000) {
 		rgmii_clrmask(ethqos, RGMII_CONFIG_BYPASS_TX_ID_EN,
 			      RGMII_IO_MACRO_CONFIG);
 		rgmii_setmask(ethqos, RGMII_CONFIG_POS_NEG_DATA_SEL,
 			      RGMII_IO_MACRO_CONFIG);
 		rgmii_setmask(ethqos, RGMII_CONFIG_PROG_SWAP,
 			      RGMII_IO_MACRO_CONFIG);
+	} else {
+		rgmii_setmask(ethqos, RGMII_CONFIG_BYPASS_TX_ID_EN,
+			      RGMII_IO_MACRO_CONFIG);
+		rgmii_clrmask(ethqos, RGMII_CONFIG_POS_NEG_DATA_SEL,
+			      RGMII_IO_MACRO_CONFIG);
+		rgmii_clrmask(ethqos, RGMII_CONFIG_PROG_SWAP,
+			      RGMII_IO_MACRO_CONFIG);
+	}
+
+	switch (speed) {
+	case SPEED_1000:
 		rgmii_clrmask(ethqos, RGMII_CONFIG2_DATA_DIVIDE_CLK_SEL,
 			      RGMII_IO_MACRO_CONFIG2);
 
@@ -443,12 +453,6 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 		break;
 
 	case SPEED_100:
-		rgmii_setmask(ethqos, RGMII_CONFIG_BYPASS_TX_ID_EN,
-			      RGMII_IO_MACRO_CONFIG);
-		rgmii_clrmask(ethqos, RGMII_CONFIG_POS_NEG_DATA_SEL,
-			      RGMII_IO_MACRO_CONFIG);
-		rgmii_clrmask(ethqos, RGMII_CONFIG_PROG_SWAP,
-			      RGMII_IO_MACRO_CONFIG);
 		rgmii_clrmask(ethqos, RGMII_CONFIG2_DATA_DIVIDE_CLK_SEL,
 			      RGMII_IO_MACRO_CONFIG2);
 		rgmii_updatel(ethqos, RGMII_CONFIG2_TX_CLK_PHASE_SHIFT_EN,
@@ -479,12 +483,6 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 		break;
 
 	case SPEED_10:
-		rgmii_setmask(ethqos, RGMII_CONFIG_BYPASS_TX_ID_EN,
-			      RGMII_IO_MACRO_CONFIG);
-		rgmii_clrmask(ethqos, RGMII_CONFIG_POS_NEG_DATA_SEL,
-			      RGMII_IO_MACRO_CONFIG);
-		rgmii_clrmask(ethqos, RGMII_CONFIG_PROG_SWAP,
-			      RGMII_IO_MACRO_CONFIG);
 		rgmii_clrmask(ethqos, RGMII_CONFIG2_DATA_DIVIDE_CLK_SEL,
 			      RGMII_IO_MACRO_CONFIG2);
 		rgmii_updatel(ethqos, RGMII_CONFIG2_TX_CLK_PHASE_SHIFT_EN,
Signature · 1 line
2.47.3
#8 lore raw

PATCH v2 7/15 net: stmmac: qcom-ethqos: move two more RGMII_IO_MACRO_CONFIG2 out

In reply to Russell King (Oracle)

RGMII_CONFIG2_DATA_DIVIDE_CLK_SEL is always cleared, and RGMII_CONFIG2_TX_CLK_PHASE_SHIFT_EN is always updated with the phase shift in each path through the switch, so these are independent of the speed. Move them out.

---
 .../stmicro/stmmac/dwmac-qcom-ethqos.c         | 18 +++++-------------
 1 file changed, 5 insertions(+), 13 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +5 -13
index e9d8c8a7146a..ab6554f58214 100644
@@ -420,13 +420,13 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 			      RGMII_IO_MACRO_CONFIG);
 	}
 
+	rgmii_clrmask(ethqos, RGMII_CONFIG2_DATA_DIVIDE_CLK_SEL,
+		      RGMII_IO_MACRO_CONFIG2);
+	rgmii_updatel(ethqos, RGMII_CONFIG2_TX_CLK_PHASE_SHIFT_EN, phase_shift,
+		      RGMII_IO_MACRO_CONFIG2);
+
 	switch (speed) {
 	case SPEED_1000:
-		rgmii_clrmask(ethqos, RGMII_CONFIG2_DATA_DIVIDE_CLK_SEL,
-			      RGMII_IO_MACRO_CONFIG2);
-
-		rgmii_updatel(ethqos, RGMII_CONFIG2_TX_CLK_PHASE_SHIFT_EN,
-			      phase_shift, RGMII_IO_MACRO_CONFIG2);
 		rgmii_clrmask(ethqos, RGMII_CONFIG2_RSVD_CONFIG15,
 			      RGMII_IO_MACRO_CONFIG2);
 		rgmii_setmask(ethqos, RGMII_CONFIG2_RX_PROG_SWAP,
@@ -453,10 +453,6 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 		break;
 
 	case SPEED_100:
-		rgmii_clrmask(ethqos, RGMII_CONFIG2_DATA_DIVIDE_CLK_SEL,
-			      RGMII_IO_MACRO_CONFIG2);
-		rgmii_updatel(ethqos, RGMII_CONFIG2_TX_CLK_PHASE_SHIFT_EN,
-			      phase_shift, RGMII_IO_MACRO_CONFIG2);
 		rgmii_updatel(ethqos, RGMII_CONFIG_MAX_SPD_PRG_2,
 			      FIELD_PREP(RGMII_CONFIG_MAX_SPD_PRG_2, 1),
 			      RGMII_IO_MACRO_CONFIG);
@@ -483,10 +479,6 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 		break;
 
 	case SPEED_10:
-		rgmii_clrmask(ethqos, RGMII_CONFIG2_DATA_DIVIDE_CLK_SEL,
-			      RGMII_IO_MACRO_CONFIG2);
-		rgmii_updatel(ethqos, RGMII_CONFIG2_TX_CLK_PHASE_SHIFT_EN,
-			      phase_shift, RGMII_IO_MACRO_CONFIG2);
 		rgmii_updatel(ethqos, RGMII_CONFIG_MAX_SPD_PRG_9,
 			      FIELD_PREP(RGMII_CONFIG_MAX_SPD_PRG_9, 19),
 			      RGMII_IO_MACRO_CONFIG);
Signature · 1 line
2.47.3
#9 lore raw

PATCH v2 8/15 net: stmmac: qcom-ethqos: move 100M/10M speed programming

In reply to Russell King (Oracle)

Move the speed programming for 100M and 10M out of the switch. There is no programming done for 1G speed.

It looks like there are two fields, 7:6 which are programemd to '1' to select a /2 divisor for 100M, and bits 16:8 which are programmed to '19' to select a /20 divisor.

---
 .../ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c   | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +9 -6
index ab6554f58214..2751def922df 100644
@@ -425,6 +425,15 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 	rgmii_updatel(ethqos, RGMII_CONFIG2_TX_CLK_PHASE_SHIFT_EN, phase_shift,
 		      RGMII_IO_MACRO_CONFIG2);
 
+	if (speed == SPEED_100)
+		rgmii_updatel(ethqos, RGMII_CONFIG_MAX_SPD_PRG_2,
+			      FIELD_PREP(RGMII_CONFIG_MAX_SPD_PRG_2, 1),
+			      RGMII_IO_MACRO_CONFIG);
+	else if (speed == SPEED_10)
+		rgmii_updatel(ethqos, RGMII_CONFIG_MAX_SPD_PRG_9,
+			      FIELD_PREP(RGMII_CONFIG_MAX_SPD_PRG_9, 19),
+			      RGMII_IO_MACRO_CONFIG);
+
 	switch (speed) {
 	case SPEED_1000:
 		rgmii_clrmask(ethqos, RGMII_CONFIG2_RSVD_CONFIG15,
@@ -453,9 +462,6 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 		break;
 
 	case SPEED_100:
-		rgmii_updatel(ethqos, RGMII_CONFIG_MAX_SPD_PRG_2,
-			      FIELD_PREP(RGMII_CONFIG_MAX_SPD_PRG_2, 1),
-			      RGMII_IO_MACRO_CONFIG);
 		rgmii_clrmask(ethqos, RGMII_CONFIG2_RSVD_CONFIG15,
 			      RGMII_IO_MACRO_CONFIG2);
 
@@ -479,9 +485,6 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 		break;
 
 	case SPEED_10:
-		rgmii_updatel(ethqos, RGMII_CONFIG_MAX_SPD_PRG_9,
-			      FIELD_PREP(RGMII_CONFIG_MAX_SPD_PRG_9, 19),
-			      RGMII_IO_MACRO_CONFIG);
 		rgmii_clrmask(ethqos, RGMII_CONFIG2_RSVD_CONFIG15,
 			      RGMII_IO_MACRO_CONFIG2);
 		if (ethqos->has_emac_ge_3)
Signature · 1 line
2.47.3
#10 lore raw

PATCH v2 9/15 net: stmmac: qcom-ethqos: move RGMII_CONFIG2_RSVD_CONFIG15 out

In reply to Russell King (Oracle)

All paths through the switch clear the RGMII_CONFIG2_RSVD_CONFIG15 field. move it out of the switch statement.

---
 .../net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c    | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +3 -7
index 2751def922df..13f4df0a90d7 100644
@@ -434,10 +434,11 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 			      FIELD_PREP(RGMII_CONFIG_MAX_SPD_PRG_9, 19),
 			      RGMII_IO_MACRO_CONFIG);
 
+	rgmii_clrmask(ethqos, RGMII_CONFIG2_RSVD_CONFIG15,
+		      RGMII_IO_MACRO_CONFIG2);
+
 	switch (speed) {
 	case SPEED_1000:
-		rgmii_clrmask(ethqos, RGMII_CONFIG2_RSVD_CONFIG15,
-			      RGMII_IO_MACRO_CONFIG2);
 		rgmii_setmask(ethqos, RGMII_CONFIG2_RX_PROG_SWAP,
 			      RGMII_IO_MACRO_CONFIG2);
 
@@ -462,9 +463,6 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 		break;
 
 	case SPEED_100:
-		rgmii_clrmask(ethqos, RGMII_CONFIG2_RSVD_CONFIG15,
-			      RGMII_IO_MACRO_CONFIG2);
-
 		if (ethqos->has_emac_ge_3)
 			rgmii_setmask(ethqos, RGMII_CONFIG2_RX_PROG_SWAP,
 				      RGMII_IO_MACRO_CONFIG2);
@@ -485,8 +483,6 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 		break;
 
 	case SPEED_10:
-		rgmii_clrmask(ethqos, RGMII_CONFIG2_RSVD_CONFIG15,
-			      RGMII_IO_MACRO_CONFIG2);
 		if (ethqos->has_emac_ge_3)
 			rgmii_setmask(ethqos, RGMII_CONFIG2_RX_PROG_SWAP,
 				      RGMII_IO_MACRO_CONFIG2);
Signature · 1 line
2.47.3
#11 lore raw

PATCH v2 10/15 net: stmmac: qcom-ethqos: move RGMII_CONFIG2_RX_PROG_SWAP

In reply to Russell King (Oracle)

Move RGMII_CONFIG2_RX_PROG_SWAP out of the switch. 1G speed always sets this field. 100M and 10M sets it for has_emac_ge_3 devices, otherwise it is cleared.

---
 .../stmicro/stmmac/dwmac-qcom-ethqos.c        | 21 ++++++-------------
 1 file changed, 6 insertions(+), 15 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +6 -15
index 13f4df0a90d7..b4c61cb24e1d 100644
@@ -437,11 +437,15 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 	rgmii_clrmask(ethqos, RGMII_CONFIG2_RSVD_CONFIG15,
 		      RGMII_IO_MACRO_CONFIG2);
 
-	switch (speed) {
-	case SPEED_1000:
+	if (speed == SPEED_1000 || ethqos->has_emac_ge_3)
 		rgmii_setmask(ethqos, RGMII_CONFIG2_RX_PROG_SWAP,
 			      RGMII_IO_MACRO_CONFIG2);
+	else
+		rgmii_clrmask(ethqos, RGMII_CONFIG2_RX_PROG_SWAP,
+			      RGMII_IO_MACRO_CONFIG2);
 
+	switch (speed) {
+	case SPEED_1000:
 		/* PRG_RCLK_DLY = TCXO period * TCXO_CYCLES_CNT / 2 * RX delay ns,
 		 * in practice this becomes PRG_RCLK_DLY = 52 * 4 / 2 * RX delay ns
 		 */
@@ -463,13 +467,6 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 		break;
 
 	case SPEED_100:
-		if (ethqos->has_emac_ge_3)
-			rgmii_setmask(ethqos, RGMII_CONFIG2_RX_PROG_SWAP,
-				      RGMII_IO_MACRO_CONFIG2);
-		else
-			rgmii_clrmask(ethqos, RGMII_CONFIG2_RX_PROG_SWAP,
-				      RGMII_IO_MACRO_CONFIG2);
-
 		/* Write 0x5 to PRG_RCLK_DLY_CODE */
 		rgmii_updatel(ethqos, SDCC_DDR_CONFIG_EXT_PRG_RCLK_DLY_CODE,
 			      FIELD_PREP(SDCC_DDR_CONFIG_EXT_PRG_RCLK_DLY_CODE,
@@ -483,12 +480,6 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 		break;
 
 	case SPEED_10:
-		if (ethqos->has_emac_ge_3)
-			rgmii_setmask(ethqos, RGMII_CONFIG2_RX_PROG_SWAP,
-				      RGMII_IO_MACRO_CONFIG2);
-		else
-			rgmii_clrmask(ethqos, RGMII_CONFIG2_RX_PROG_SWAP,
-				      RGMII_IO_MACRO_CONFIG2);
 		/* Write 0x5 to PRG_RCLK_DLY_CODE */
 		rgmii_updatel(ethqos, SDCC_DDR_CONFIG_EXT_PRG_RCLK_DLY_CODE,
 			      FIELD_PREP(SDCC_DDR_CONFIG_EXT_PRG_RCLK_DLY_CODE,
Signature · 1 line
2.47.3
#12 lore raw

PATCH v2 11/15 net: stmmac: qcom-ethqos: finally eliminate the switch

In reply to Russell King (Oracle)

Move the RCLK delay configuration out of the switch, which just leaves the RGMII_CONFIG_LOOPBACK_EN setting in all three paths. This makes it trivial to eliminate the switch.

---
 .../stmicro/stmmac/dwmac-qcom-ethqos.c        | 47 +++++++------------
 1 file changed, 16 insertions(+), 31 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +16 -31
index b4c61cb24e1d..7690ae0bb008 100644
@@ -444,8 +444,18 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 		rgmii_clrmask(ethqos, RGMII_CONFIG2_RX_PROG_SWAP,
 			      RGMII_IO_MACRO_CONFIG2);
 
-	switch (speed) {
-	case SPEED_1000:
+	if (speed != SPEED_1000) {
+		/* Write 0x5 to PRG_RCLK_DLY_CODE */
+		rgmii_updatel(ethqos, SDCC_DDR_CONFIG_EXT_PRG_RCLK_DLY_CODE,
+			      FIELD_PREP(SDCC_DDR_CONFIG_EXT_PRG_RCLK_DLY_CODE,
+					 5), SDCC_HC_REG_DDR_CONFIG);
+
+		rgmii_setmask(ethqos, SDCC_DDR_CONFIG_EXT_PRG_RCLK_DLY,
+			      SDCC_HC_REG_DDR_CONFIG);
+
+		rgmii_setmask(ethqos, SDCC_DDR_CONFIG_EXT_PRG_RCLK_DLY_EN,
+			      SDCC_HC_REG_DDR_CONFIG);
+	} else {
 		/* PRG_RCLK_DLY = TCXO period * TCXO_CYCLES_CNT / 2 * RX delay ns,
 		 * in practice this becomes PRG_RCLK_DLY = 52 * 4 / 2 * RX delay ns
 		 */
@@ -460,39 +470,14 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 				      FIELD_PREP(SDCC_DDR_CONFIG_PRG_RCLK_DLY,
 						 57), SDCC_HC_REG_DDR_CONFIG);
 		}
-		rgmii_setmask(ethqos, SDCC_DDR_CONFIG_PRG_DLY_EN,
-			      SDCC_HC_REG_DDR_CONFIG);
-		rgmii_updatel(ethqos, RGMII_CONFIG_LOOPBACK_EN,
-			      loopback, RGMII_IO_MACRO_CONFIG);
-		break;
-
-	case SPEED_100:
-		/* Write 0x5 to PRG_RCLK_DLY_CODE */
-		rgmii_updatel(ethqos, SDCC_DDR_CONFIG_EXT_PRG_RCLK_DLY_CODE,
-			      FIELD_PREP(SDCC_DDR_CONFIG_EXT_PRG_RCLK_DLY_CODE,
-					 5), SDCC_HC_REG_DDR_CONFIG);
-		rgmii_setmask(ethqos, SDCC_DDR_CONFIG_EXT_PRG_RCLK_DLY,
-			      SDCC_HC_REG_DDR_CONFIG);
-		rgmii_setmask(ethqos, SDCC_DDR_CONFIG_EXT_PRG_RCLK_DLY_EN,
-			      SDCC_HC_REG_DDR_CONFIG);
-		rgmii_updatel(ethqos, RGMII_CONFIG_LOOPBACK_EN,
-			      loopback, RGMII_IO_MACRO_CONFIG);
-		break;
 
-	case SPEED_10:
-		/* Write 0x5 to PRG_RCLK_DLY_CODE */
-		rgmii_updatel(ethqos, SDCC_DDR_CONFIG_EXT_PRG_RCLK_DLY_CODE,
-			      FIELD_PREP(SDCC_DDR_CONFIG_EXT_PRG_RCLK_DLY_CODE,
-					 5), SDCC_HC_REG_DDR_CONFIG);
-		rgmii_setmask(ethqos, SDCC_DDR_CONFIG_EXT_PRG_RCLK_DLY,
-			      SDCC_HC_REG_DDR_CONFIG);
-		rgmii_setmask(ethqos, SDCC_DDR_CONFIG_EXT_PRG_RCLK_DLY_EN,
+		rgmii_setmask(ethqos, SDCC_DDR_CONFIG_PRG_DLY_EN,
 			      SDCC_HC_REG_DDR_CONFIG);
-		rgmii_updatel(ethqos, RGMII_CONFIG_LOOPBACK_EN,
-			      loopback, RGMII_IO_MACRO_CONFIG);
-		break;
 	}
 
+	rgmii_updatel(ethqos, RGMII_CONFIG_LOOPBACK_EN, loopback,
+		      RGMII_IO_MACRO_CONFIG);
+
 	return 0;
 }
 
Signature · 1 line
2.47.3
#13 lore raw

PATCH v2 12/15 net: stmmac: qcom-ethqos: simplify prg_rclk_dly programming

In reply to Russell King (Oracle)

Rather than coding the entire register update twice with different values, use a local variable to specify the value and have one register update statement that uses this local variable. This results in neater code.

---
 .../net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +7 -6
index 7690ae0bb008..580deec1dc30 100644
@@ -374,6 +374,7 @@ static int ethqos_dll_configure(struct qcom_ethqos *ethqos)
 static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 {
 	struct device *dev = &ethqos->pdev->dev;
+	unsigned int prg_rclk_dly;
 	int phase_shift;
 	int loopback;
 
@@ -461,16 +462,16 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 		 */
 		if (ethqos->has_emac_ge_3) {
 			/* 0.9 ns */
-			rgmii_updatel(ethqos, SDCC_DDR_CONFIG_PRG_RCLK_DLY,
-				      FIELD_PREP(SDCC_DDR_CONFIG_PRG_RCLK_DLY,
-						 115), SDCC_HC_REG_DDR_CONFIG);
+			prg_rclk_dly = 115;
 		} else {
 			/* 1.8 ns */
-			rgmii_updatel(ethqos, SDCC_DDR_CONFIG_PRG_RCLK_DLY,
-				      FIELD_PREP(SDCC_DDR_CONFIG_PRG_RCLK_DLY,
-						 57), SDCC_HC_REG_DDR_CONFIG);
+			prg_rclk_dly = 57;
 		}
 
+		rgmii_updatel(ethqos, SDCC_DDR_CONFIG_PRG_RCLK_DLY,
+			      FIELD_PREP(SDCC_DDR_CONFIG_PRG_RCLK_DLY,
+					 prg_rclk_dly), SDCC_HC_REG_DDR_CONFIG);
+
 		rgmii_setmask(ethqos, SDCC_DDR_CONFIG_PRG_DLY_EN,
 			      SDCC_HC_REG_DDR_CONFIG);
 	}
Signature · 1 line
2.47.3
#14 lore raw

PATCH v2 13/15 net: stmmac: qcom-ethqos: move loopback decision next to reg update

In reply to Russell King (Oracle)

Move the loopback decision next to the register update, and make the local variable unsigned. As a result, there is now no need for the comment referring to the programming being later.

---
 .../ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c    | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +6 -8
index 580deec1dc30..9dae40c27903 100644
@@ -374,9 +374,8 @@ static int ethqos_dll_configure(struct qcom_ethqos *ethqos)
 static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 {
 	struct device *dev = &ethqos->pdev->dev;
-	unsigned int prg_rclk_dly;
+	unsigned int prg_rclk_dly, loopback;
 	int phase_shift;
-	int loopback;
 
 	/* Determine if the PHY adds a 2 ns TX delay or the MAC handles it */
 	if (ethqos->phy_mode == PHY_INTERFACE_MODE_RGMII_ID ||
@@ -389,12 +388,6 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 	rgmii_clrmask(ethqos, RGMII_CONFIG2_TX_TO_RX_LOOPBACK_EN,
 		      RGMII_IO_MACRO_CONFIG2);
 
-	/* Determine if this platform wants loopback enabled after programming */
-	if (ethqos->rgmii_config_loopback_en)
-		loopback = RGMII_CONFIG_LOOPBACK_EN;
-	else
-		loopback = 0;
-
 	/* Select RGMII, write 0 to interface select */
 	rgmii_clrmask(ethqos, RGMII_CONFIG_INTF_SEL, RGMII_IO_MACRO_CONFIG);
 
@@ -476,6 +469,11 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 			      SDCC_HC_REG_DDR_CONFIG);
 	}
 
+	if (ethqos->rgmii_config_loopback_en)
+		loopback = RGMII_CONFIG_LOOPBACK_EN;
+	else
+		loopback = 0;
+
 	rgmii_updatel(ethqos, RGMII_CONFIG_LOOPBACK_EN, loopback,
 		      RGMII_IO_MACRO_CONFIG);
 
Signature · 1 line
2.47.3
#15 lore raw

PATCH v2 14/15 net: stmmac: qcom-ethqos: correct prg_rclk_dly comment

In reply to Russell King (Oracle)

The comment for calculating the prg_rclk_dly value is incorrect as it omits the brackets around the divisor. Add the brackets to allow the reader to correctly evaluate the value. Validated with the values given in the driver.

---
 drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +4 -2
index 9dae40c27903..667676c29a95 100644
@@ -450,8 +450,10 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 		rgmii_setmask(ethqos, SDCC_DDR_CONFIG_EXT_PRG_RCLK_DLY_EN,
 			      SDCC_HC_REG_DDR_CONFIG);
 	} else {
-		/* PRG_RCLK_DLY = TCXO period * TCXO_CYCLES_CNT / 2 * RX delay ns,
-		 * in practice this becomes PRG_RCLK_DLY = 52 * 4 / 2 * RX delay ns
+		/* PRG_RCLK_DLY = TCXO period * TCXO_CYCLES_CNT /
+		 *  (2 * RX delay ns),
+		 * in practice this becomes PRG_RCLK_DLY = 52 * 4 /
+		 *  (2 * RX delay ns)
 		 */
 		if (ethqos->has_emac_ge_3) {
 			/* 0.9 ns */
Signature · 1 line
2.47.3
#16 lore raw

PATCH v2 15/15 net: stmmac: qcom-ethqos: move phase_shift to register update site

In reply to Russell King (Oracle)

Move the determination of the phase shift enable alongside the register update, and make "phase_shift" unsigned.

---
 .../ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +9 -8
index 667676c29a95..ad3a983d2a08 100644
@@ -375,14 +375,7 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 {
 	struct device *dev = &ethqos->pdev->dev;
 	unsigned int prg_rclk_dly, loopback;
-	int phase_shift;
-
-	/* Determine if the PHY adds a 2 ns TX delay or the MAC handles it */
-	if (ethqos->phy_mode == PHY_INTERFACE_MODE_RGMII_ID ||
-	    ethqos->phy_mode == PHY_INTERFACE_MODE_RGMII_TXID)
-		phase_shift = 0;
-	else
-		phase_shift = RGMII_CONFIG2_TX_CLK_PHASE_SHIFT_EN;
+	unsigned int phase_shift;
 
 	/* Disable loopback mode */
 	rgmii_clrmask(ethqos, RGMII_CONFIG2_TX_TO_RX_LOOPBACK_EN,
@@ -416,6 +409,14 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 
 	rgmii_clrmask(ethqos, RGMII_CONFIG2_DATA_DIVIDE_CLK_SEL,
 		      RGMII_IO_MACRO_CONFIG2);
+
+	/* Determine if the PHY adds a 2 ns TX delay or the MAC handles it */
+	if (ethqos->phy_mode == PHY_INTERFACE_MODE_RGMII_ID ||
+	    ethqos->phy_mode == PHY_INTERFACE_MODE_RGMII_TXID)
+		phase_shift = 0;
+	else
+		phase_shift = RGMII_CONFIG2_TX_CLK_PHASE_SHIFT_EN;
+
 	rgmii_updatel(ethqos, RGMII_CONFIG2_TX_CLK_PHASE_SHIFT_EN, phase_shift,
 		      RGMII_IO_MACRO_CONFIG2);
 
Signature · 1 line
2.47.3
maintainer Tested-by on the v2 series
#17 lore raw
In reply to Russell King (Oracle)

Hi Russell,

Quoted 10 lines · Russell King (Oracle)

Further cleanups to qcom-ethqos, mainly concentrating on the RGMII code, making it clearer what the differences are for each speed, thus making the code more readable.

I'm still not really happy with this. The speed specific configuration remains split between ethqos_fix_mac_speed_rgmii() and ethqos_rgmii_macro_init(), where the latter is only ever called from the former. So, I think further work is needed here - maybe it needs restructuring into the various componenet parts of the RGMII block?

Quoted 7 lines

v2:
- patch 2: fix typo in commit message
- patch 3: fix ethqos_fix_mac_speed() comment

 .../ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c    | 220 ++++++++-------------
 1 file changed, 87 insertions(+), 133 deletions(-)

No issues found at 100M and 1G on the QCS615 Ride board with the KSZ9031 RGMII PHY. As noted earlier, Ethernet support for this board is not yet upstream, but I have some local changes to make it work.

10M could not be tested due to limitations of the link partner. But with 100M working fine, I am fairly certain that this series will not introduce any new issues at 10M.

Please feel free to add my:

Ayaan

#18 lore raw
In reply to Russell King (Oracle)
This series was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:

Hello:

This series was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:

Quoted 11 lines · On Fri, 27 Mar 2026 08:42:58 +0000 you wrote:

Further cleanups to qcom-ethqos, mainly concentrating on the RGMII code, making it clearer what the differences are for each speed, thus making the code more readable.

I'm still not really happy with this. The speed specific configuration remains split between ethqos_fix_mac_speed_rgmii() and ethqos_rgmii_macro_init(), where the latter is only ever called from the former. So, I think further work is needed here - maybe it needs restructuring into the various componenet parts of the RGMII block?

[...]

Here is the summary with links:
- [net-next,v2,01/15] net: stmmac: qcom-ethqos: remove ethqos_configure()

    https://git.kernel.org/netdev/net-next/c/c3dd3b1e76e0
  - [net-next,v2,02/15] net: stmmac: qcom-ethqos: pass ethqos to ethqos_pcs_set_inband()
    https://git.kernel.org/netdev/net-next/c/673416fb5b41
  - [net-next,v2,03/15] net: stmmac: qcom-ethqos: eliminate configure_func
    https://git.kernel.org/netdev/net-next/c/e9ed46a0b129
  - [net-next,v2,04/15] net: stmmac: qcom-ethqos: move detection of invalid RGMII speed
    https://git.kernel.org/netdev/net-next/c/426ce4677e81
  - [net-next,v2,05/15] net: stmmac: qcom-ethqos: move RGMII_CONFIG_DDR_MODE
    https://git.kernel.org/netdev/net-next/c/6be23c4c636a
  - [net-next,v2,06/15] net: stmmac: qcom-ethqos: move 1G vs 100M/10M RGMII settings
    https://git.kernel.org/netdev/net-next/c/82d5fdc82a33
  - [net-next,v2,07/15] net: stmmac: qcom-ethqos: move two more RGMII_IO_MACRO_CONFIG2 out
    https://git.kernel.org/netdev/net-next/c/dd07f2f9149a
  - [net-next,v2,08/15] net: stmmac: qcom-ethqos: move 100M/10M speed programming
    https://git.kernel.org/netdev/net-next/c/8b19a9184420
  - [net-next,v2,09/15] net: stmmac: qcom-ethqos: move RGMII_CONFIG2_RSVD_CONFIG15 out
    https://git.kernel.org/netdev/net-next/c/dae1de3df3e1
  - [net-next,v2,10/15] net: stmmac: qcom-ethqos: move RGMII_CONFIG2_RX_PROG_SWAP
    https://git.kernel.org/netdev/net-next/c/432c8a9f5528
  - [net-next,v2,11/15] net: stmmac: qcom-ethqos: finally eliminate the switch
    https://git.kernel.org/netdev/net-next/c/439a27f21ecc
  - [net-next,v2,12/15] net: stmmac: qcom-ethqos: simplify prg_rclk_dly programming
    https://git.kernel.org/netdev/net-next/c/3df0e86f8f8d
  - [net-next,v2,13/15] net: stmmac: qcom-ethqos: move loopback decision next to reg update
    https://git.kernel.org/netdev/net-next/c/67343aa24e59
  - [net-next,v2,14/15] net: stmmac: qcom-ethqos: correct prg_rclk_dly comment
    https://git.kernel.org/netdev/net-next/c/2d350a892aad
  - [net-next,v2,15/15] net: stmmac: qcom-ethqos: move phase_shift to register update site
    https://git.kernel.org/netdev/net-next/c/7f9f30166005

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html