Skip to contentSkip to conversation

net: stmmac: qcom-ethqos: set clk_csr

PATCH Applied Russell King (Oracle) 2 participants 2 messages Apr 2 – Apr 3

Subsystems (6)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 net: stmmac: qcom-ethqos: set clk_csr

The clocks for qcom-ethqos return a rate of zero as firmware manages their rate. According to hardware documentation, the clock which is fed to the slave AHB interface can range between 50 to 100MHz for non-RGMII and 30 to 75MHz for boards with a RGMII interfaces.

Currently, stmmac uses an undefined divisor value. Instead, use STMMAC_CSR_60_100M which will mean we meet IEEE 802.3 specification since this will generate:

714kHz @ 30MHz
1.19MHz @ 50MHz
1.79MHz @ 75MHz
2.42MHz @ 100MHz

This gives MDC rates within the IEEE 802.3 specification, although the 30MHz case is particularly slow.

Selecting the next lowest divisor, STMMAC_CSR_35_60M, which is /26 will give:

1.15MHz @ 30MHz
1.92MHz @ 50MHz
2.88MHz @ 75MHz (exceeding 802.3 spec)
3.85MHz @ 100MHz (exceeding 802.3 spec)

Unfortunately, this divisor makes the upper bound of both ranges exeed the IEEE 802.3 specification, and thus we can not use it without knowing for certain what the current CSR clock rate actually is.

So, STMMAC_CSR_60_100M is the best fit for all boards based on the information provided thus far.

---
 drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +6 -0
index ad3a983d2a08..ac7d6d3e205a 100644
@@ -764,6 +764,12 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 	qcom_ethqos_set_sgmii_loopback(ethqos, true);
 	ethqos_set_func_clk_en(ethqos);
 
+	/* The clocks are controlled by firmware, so we don't know for certain
+	 * what clock rate is being used. Hardware documentation mentions that
+	 * the AHB slave clock will be in the range of 50 to 100MHz, which
+	 * equates to a MDC between 1.19 and 2.38MHz.
+	 */
+	plat_dat->clk_csr = STMMAC_CSR_60_100M;
 	plat_dat->bsp_priv = ethqos;
 	plat_dat->set_clk_tx_rate = ethqos_set_clk_tx_rate;
 	plat_dat->dump_debug_regs = rgmii_dump;
Signature · 1 line
2.47.3
#1 lore raw
This patch was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:

Hello:

This patch was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:

Quoted 10 lines · On Thu, 02 Apr 2026 15:47:53 +0100 you wrote:

The clocks for qcom-ethqos return a rate of zero as firmware manages their rate. According to hardware documentation, the clock which is fed to the slave AHB interface can range between 50 to 100MHz for non-RGMII and 30 to 75MHz for boards with a RGMII interfaces.

Currently, stmmac uses an undefined divisor value. Instead, use STMMAC_CSR_60_100M which will mean we meet IEEE 802.3 specification since this will generate:

[...]

Here is the summary with links:
- [net-next] net: stmmac: qcom-ethqos: set clk_csr

    https://git.kernel.org/netdev/net-next/c/789ec16eb397

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html