EEPro100 problems in SMP on 2.4.5 ?
Quoted 3 lines
Hi. While doing some file tranfers to our new server (a Compaq >Proliant 8way XEON 500 with 4gb ram and an EEPro100 NIC), the box socked sol (no oops, no response via network, no response via console). The other
Quoted 1 line
hardware in the system was a Compaq Smart Array 9SMART2 driver). It's
running Slackware 7.1.
We had similar problems with Compaq Proliant XEON EEPro100 NIC and Compaq Spart Array. System would periodically hang or panic. Problems went away after I replaced EEPRO100 NIC with TLAN NICs(Texas instruments or "Thunderland"). It's a good indication that there could be a problem with eepro driver.
---
Arturas Vaitaitis.
---
Please CC: to [email protected]
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp.
Quoted 5 lines · Arturas V
We had similar problems with Compaq Proliant XEON EEPro100 NIC and Compaq Spart Array. System would periodically hang or panic. Problems went away after I replaced EEPRO100 NIC with TLAN
NICs(Texas instruments or "Thunderland"). It's a good indication that there could be a problem with eepro driver.
You not only replaced the driver but the hardware too. So, that tells us nothing about the eepro100 driver really.
Jeff
Depending on the model, also, some EEPro100s were buggy hardware wise, and had problems with various MBs.
----- Original Message -----
From: "Legacy Fishtank" <[email protected]>
To: "Arturas V" <[email protected]>
Cc: <[email protected]>
Sent: Wednesday, 26 December, 2001 4:43 PM
Subject: Re: EEPro100 problems in SMP on 2.4.5 ?
Quoted 2 lines · Arturas V
Quoted 1 line
We had similar problems with Compaq Proliant XEON EEPro100 NIC and
Compaq
Quoted 3 lines
Quoted 3 lines
Spart Array. System would periodically hang or panic. Problems went away after I replaced EEPRO100 NIC with TLAN
NICs(Texas instruments or "Thunderland"). It's a good indication that there could be a problem
with
Quoted 14 lines
Quoted 1 line
eepro driver.
You not only replaced the driver but the hardware too. So, that tells us nothing about the eepro100 driver really.
Jeff
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/