Skip to contentSkip to conversation

HID: ASUS: Add support for ASUS N-Key keyboard

PATCH Superseded Luke D Jones 2 participants 5 messages Oct 25, 2020 – Oct 27, 2020 HID

v9 of 10 Superseded Latest is v10 →

lore
Share & tools
lore
#0 lore raw

PATCH v9 1/1 HID: ASUS: Add support for ASUS N-Key keyboard

The ASUS N-Key keyboard uses the productId of 0x1866 and is used in almost all modern ASUS gaming laptops with slight changes to the firmware. This patch enables: Fn+key hotkeys, keyboard backlight brightness control.

Additionally this keyboard requires the LED interface to be initialised before such things as keyboard backlight control work.

---
 drivers/hid/hid-asus.c | 116 ++++++++++++++++++++++++++++++++++++-----
 drivers/hid/hid-ids.h  |   1 +
 2 files changed, 103 insertions(+), 14 deletions(-)
drivers/hid/hid-asus.c +102 -14
index c183caf89d49..98b033b4951f 100644
@@ -48,6 +48,8 @@ MODULE_DESCRIPTION("Asus HID Keyboard and TouchPad");
 #define INPUT_REPORT_ID 0x5d
 #define FEATURE_KBD_REPORT_ID 0x5a
 #define FEATURE_KBD_REPORT_SIZE 16
+#define FEATURE_KBD_LED_REPORT_ID1 0x5d
+#define FEATURE_KBD_LED_REPORT_ID2 0x5e
 
 #define SUPPORT_KBD_BACKLIGHT BIT(0)
 
@@ -80,6 +82,7 @@ MODULE_DESCRIPTION("Asus HID Keyboard and TouchPad");
 #define QUIRK_T101HA_DOCK		BIT(9)
 #define QUIRK_T90CHI			BIT(10)
 #define QUIRK_MEDION_E1239T		BIT(11)
+#define QUIRK_ROG_NKEY_KEYBOARD		BIT(12)
 
 #define I2C_KEYBOARD_QUIRKS			(QUIRK_FIX_NOTEBOOK_REPORT | \
 						 QUIRK_NO_INIT_REPORTS | \
@@ -332,6 +335,28 @@ static int asus_raw_event(struct hid_device *hdev,
 	if (drvdata->quirks & QUIRK_MEDION_E1239T)
 		return asus_e1239t_event(drvdata, data, size);
 
+	if (drvdata->quirks & QUIRK_ROG_NKEY_KEYBOARD) {
+		/*
+		 * Skip these report ID, the device emits a continuous stream associated
+		 * with the AURA mode it is in which looks like an 'echo'.
+		*/
+		if (report->id == FEATURE_KBD_LED_REPORT_ID1 ||
+				report->id == FEATURE_KBD_LED_REPORT_ID2) {
+			return -1;
+		/* Additional report filtering */
+		} else if (report->id == FEATURE_KBD_REPORT_ID) {
+			/*
+			 * G14 and G15 send these codes on some keypresses with no
+			 * discernable reason for doing so. We'll filter them out to avoid
+			 * unmapped warning messages later.
+			*/
+			if (data[1] == 0xea || data[1] == 0xec || data[1] == 0x02 ||
+					data[1] == 0x8a || data[1] == 0x9e) {
+				return -1;
+			}
+		}
+	}
+
 	return 0;
 }
 
@@ -344,7 +369,11 @@ static int asus_kbd_set_report(struct hid_device *hdev, u8 *buf, size_t buf_size
 	if (!dmabuf)
 		return -ENOMEM;
 
-	ret = hid_hw_raw_request(hdev, FEATURE_KBD_REPORT_ID, dmabuf,
+	/*
+	 * The report ID should be set from the incoming buffer due to LED and key
+	 * interfaces having different pages
+	*/
+	ret = hid_hw_raw_request(hdev, buf[0], dmabuf,
 				 buf_size, HID_FEATURE_REPORT,
 				 HID_REQ_SET_REPORT);
 	kfree(dmabuf);
@@ -397,6 +426,44 @@ static int asus_kbd_get_functions(struct hid_device *hdev,
 	return ret;
 }
 
+static int rog_nkey_led_init(struct hid_device *hdev)
+{
+	u8 buf_init_start[] = { FEATURE_KBD_LED_REPORT_ID1, 0xB9 };
+	u8 buf_init2[] = { FEATURE_KBD_LED_REPORT_ID1, 0x41, 0x53, 0x55, 0x53, 0x20,
+				0x54, 0x65, 0x63, 0x68, 0x2e, 0x49, 0x6e, 0x63, 0x2e, 0x00 };
+	u8 buf_init3[] = { FEATURE_KBD_LED_REPORT_ID1,
+						0x05, 0x20, 0x31, 0x00, 0x08 };
+	int ret;
+
+	hid_info(hdev, "Asus initialise N-KEY Device");
+	/* The first message is an init start */
+	ret = asus_kbd_set_report(hdev, buf_init_start, sizeof(buf_init_start));
+	if (ret < 0)
+		hid_warn(hdev, "Asus failed to send init start command: %d\n", ret);
+	/* Followed by a string */
+	ret = asus_kbd_set_report(hdev, buf_init2, sizeof(buf_init2));
+	if (ret < 0)
+		hid_warn(hdev, "Asus failed to send init command 1.0: %d\n", ret);
+	/* Followed by a string */
+	ret = asus_kbd_set_report(hdev, buf_init3, sizeof(buf_init3));
+	if (ret < 0)
+		hid_warn(hdev, "Asus failed to send init command 1.1: %d\n", ret);
+
+	/* begin second report ID with same data */
+	buf_init2[0] = FEATURE_KBD_LED_REPORT_ID2;
+	buf_init3[0] = FEATURE_KBD_LED_REPORT_ID2;
+
+	ret = asus_kbd_set_report(hdev, buf_init2, sizeof(buf_init2));
+	if (ret < 0)
+		hid_warn(hdev, "Asus failed to send init command 2.0: %d\n", ret);
+
+	ret = asus_kbd_set_report(hdev, buf_init3, sizeof(buf_init3));
+	if (ret < 0)
+		hid_warn(hdev, "Asus failed to send init command 2.1: %d\n", ret);
+
+	return ret;
+}
+
 static void asus_kbd_backlight_set(struct led_classdev *led_cdev,
 				   enum led_brightness brightness)
 {
@@ -460,19 +527,25 @@ static int asus_kbd_register_leds(struct hid_device *hdev)
 	unsigned char kbd_func;
 	int ret;
 
-	/* Initialize keyboard */
-	ret = asus_kbd_init(hdev);
-	if (ret < 0)
-		return ret;
+	if (drvdata->quirks & QUIRK_ROG_NKEY_KEYBOARD) {
+		ret = rog_nkey_led_init(hdev);
+		if (ret < 0)
+			return ret;
+	} else {
+		/* Initialize keyboard */
+		ret = asus_kbd_init(hdev);
+		if (ret < 0)
+			return ret;
 
-	/* Get keyboard functions */
-	ret = asus_kbd_get_functions(hdev, &kbd_func);
-	if (ret < 0)
-		return ret;
+		/* Get keyboard functions */
+		ret = asus_kbd_get_functions(hdev, &kbd_func);
+		if (ret < 0)
+			return ret;
 
-	/* Check for backlight support */
-	if (!(kbd_func & SUPPORT_KBD_BACKLIGHT))
-		return -ENODEV;
+		/* Check for backlight support */
+		if (!(kbd_func & SUPPORT_KBD_BACKLIGHT))
+			return -ENODEV;
+	}
 
 	drvdata->kbd_backlight = devm_kzalloc(&hdev->dev,
 					      sizeof(struct asus_kbd_leds),
@@ -751,8 +824,8 @@ static int asus_input_mapping(struct hid_device *hdev,
 	     usage->hid == (HID_UP_GENDEVCTRLS | 0x0026)))
 		return -1;
 
-	/* ASUS-specific keyboard hotkeys */
-	if ((usage->hid & HID_USAGE_PAGE) == 0xff310000) {
+	/* ASUS-specific keyboard hotkeys and led backlight */
+	if ((usage->hid & HID_USAGE_PAGE) == HID_UP_ASUSVENDOR) {
 		switch (usage->hid & HID_USAGE) {
 		case 0x10: asus_map_key_clear(KEY_BRIGHTNESSDOWN);	break;
 		case 0x20: asus_map_key_clear(KEY_BRIGHTNESSUP);		break;
@@ -780,6 +853,18 @@ static int asus_input_mapping(struct hid_device *hdev,
 		/* Fn+F5 "fan" symbol on FX503VD */
 		case 0x99: asus_map_key_clear(KEY_PROG4);		break;
 
+		/* Fn+F5 "fan" symbol on N-Key keyboard */
+		case 0xae: asus_map_key_clear(KEY_PROG4);		break;
+
+		/* Fn+Ret "Calc" symbol on N-Key keyboard */
+		case 0x92: asus_map_key_clear(KEY_CALC);		break;
+
+		/* Fn+Left Aura mode previous on N-Key keyboard */
+		case 0xb2: asus_map_key_clear(KEY_PROG2);		break;
+
+		/* Fn+Right Aura mode next on N-Key keyboard */
+		case 0xb3: asus_map_key_clear(KEY_PROG3);		break;
+
 		default:
 			/* ASUS lazily declares 256 usages, ignore the rest,
 			 * as some make the keyboard appear as a pointer device. */
@@ -1126,6 +1211,9 @@ static const struct hid_device_id asus_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK,
 		USB_DEVICE_ID_ASUSTEK_FX503VD_KEYBOARD),
 	  QUIRK_USE_KBD_BACKLIGHT },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK,
+	    USB_DEVICE_ID_ASUSTEK_ROG_NKEY_KEYBOARD),
+	  QUIRK_USE_KBD_BACKLIGHT | QUIRK_ROG_NKEY_KEYBOARD },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK,
 		USB_DEVICE_ID_ASUSTEK_T100TA_KEYBOARD),
 	  QUIRK_T100_KEYBOARD | QUIRK_NO_CONSUMER_USAGES },
drivers/hid/hid-ids.h +1 -0
index 6f370e020feb..c9f930ddcfd7 100644
@@ -190,6 +190,7 @@
 #define USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD1 0x1854
 #define USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD2 0x1837
 #define USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD3 0x1822
+#define USB_DEVICE_ID_ASUSTEK_ROG_NKEY_KEYBOARD	0x1866
 #define USB_DEVICE_ID_ASUSTEK_FX503VD_KEYBOARD	0x1869
 
 #define USB_VENDOR_ID_ATEN		0x0557

--
2.28.0

#1 lore raw

Hi Luke,

I'm afraid that this patch still has all the spaces on an otherwise empty line (which are part of the unified patch format) stripped. So this patch cannot be applied without manually fixing it up.

Can you try using "git send-email" for the next version ?

Note no need to worry too much about this, since it is a small patch we can always fix it up. If Jiri does not want to fix it, I can fix it and resubmit it (while keeping you as the author).

Quoted 7 lines · Luke D Jones

The ASUS N-Key keyboard uses the productId of 0x1866 and is used in almost all modern ASUS gaming laptops with slight changes to the firmware. This patch enables: Fn+key hotkeys, keyboard backlight brightness control.

Additionally this keyboard requires the LED interface to be initialised before such things as keyboard backlight control work.

initialized

Quoted 3 lines

---

Please for the next version put a changelog here.

Quoted 79 lines
 drivers/hid/hid-asus.c | 116 ++++++++++++++++++++++++++++++++++++-----
 drivers/hid/hid-ids.h  |   1 +
 2 files changed, 103 insertions(+), 14 deletions(-)
drivers/hid/hid-asus.c +38 -1
index c183caf89d49..98b033b4951f 100644
@@ -48,6 +48,8 @@ MODULE_DESCRIPTION("Asus HID Keyboard and TouchPad");
 #define INPUT_REPORT_ID 0x5d
 #define FEATURE_KBD_REPORT_ID 0x5a
 #define FEATURE_KBD_REPORT_SIZE 16
+#define FEATURE_KBD_LED_REPORT_ID1 0x5d
+#define FEATURE_KBD_LED_REPORT_ID2 0x5e
 
 #define SUPPORT_KBD_BACKLIGHT BIT(0)
 
@@ -80,6 +82,7 @@ MODULE_DESCRIPTION("Asus HID Keyboard and TouchPad");
 #define QUIRK_T101HA_DOCK		BIT(9)
 #define QUIRK_T90CHI			BIT(10)
 #define QUIRK_MEDION_E1239T		BIT(11)
+#define QUIRK_ROG_NKEY_KEYBOARD		BIT(12)
 
 #define I2C_KEYBOARD_QUIRKS			(QUIRK_FIX_NOTEBOOK_REPORT | \
 						 QUIRK_NO_INIT_REPORTS | \
@@ -332,6 +335,28 @@ static int asus_raw_event(struct hid_device *hdev,
 	if (drvdata->quirks & QUIRK_MEDION_E1239T)
 		return asus_e1239t_event(drvdata, data, size);
 
+	if (drvdata->quirks & QUIRK_ROG_NKEY_KEYBOARD) {
+		/*
+		 * Skip these report ID, the device emits a continuous stream associated
+		 * with the AURA mode it is in which looks like an 'echo'.
+		*/
+		if (report->id == FEATURE_KBD_LED_REPORT_ID1 ||
+				report->id == FEATURE_KBD_LED_REPORT_ID2) {
+			return -1;
+		/* Additional report filtering */
+		} else if (report->id == FEATURE_KBD_REPORT_ID) {
+			/*
+			 * G14 and G15 send these codes on some keypresses with no
+			 * discernable reason for doing so. We'll filter them out to avoid
+			 * unmapped warning messages later.
+			*/
+			if (data[1] == 0xea || data[1] == 0xec || data[1] == 0x02 ||
+					data[1] == 0x8a || data[1] == 0x9e) {
+				return -1;
+			}
+		}
+	}
+
 	return 0;
 }
 
@@ -344,7 +369,11 @@ static int asus_kbd_set_report(struct hid_device *hdev, u8 *buf, size_t buf_size
 	if (!dmabuf)
 		return -ENOMEM;
 
-	ret = hid_hw_raw_request(hdev, FEATURE_KBD_REPORT_ID, dmabuf,
+	/*
+	 * The report ID should be set from the incoming buffer due to LED and key
+	 * interfaces having different pages
+	*/
+	ret = hid_hw_raw_request(hdev, buf[0], dmabuf,
 				 buf_size, HID_FEATURE_REPORT,
 				 HID_REQ_SET_REPORT);
 	kfree(dmabuf);
@@ -397,6 +426,44 @@ static int asus_kbd_get_functions(struct hid_device *hdev,
 	return ret;
 }
 
+static int rog_nkey_led_init(struct hid_device *hdev)
+{
+	u8 buf_init_start[] = { FEATURE_KBD_LED_REPORT_ID1, 0xB9 };
+	u8 buf_init2[] = { FEATURE_KBD_LED_REPORT_ID1, 0x41, 0x53, 0x55, 0x53, 0x20,
+				0x54, 0x65, 0x63, 0x68, 0x2e, 0x49, 0x6e, 0x63, 0x2e, 0x00 };
+	u8 buf_init3[] = { FEATURE_KBD_LED_REPORT_ID1,
+						0x05, 0x20, 0x31, 0x00, 0x08 };
+	int ret;

drivers/hid/hid-asus.c static int asus_kbd_get_functions(struct hid_device *hdev, · line 446

Quoted 10 lines
drivers/hid/hid-asus.c +10 -0
+
+	hid_info(hdev, "Asus initialise N-KEY Device");
+	/* The first message is an init start */
+	ret = asus_kbd_set_report(hdev, buf_init_start, sizeof(buf_init_start));
+	if (ret < 0)
+		hid_warn(hdev, "Asus failed to send init start command: %d\n", ret);
+	/* Followed by a string */
+	ret = asus_kbd_set_report(hdev, buf_init2, sizeof(buf_init2));
+	if (ret < 0)
+		hid_warn(hdev, "Asus failed to send init command 1.0: %d\n", ret);

Hmm, so this construction means that the final return value of this function may be 0 even if some commands fail.

The actual led calls device registration will get skipped on a failure return; and we probably should skip that registration on any errors, so how about:

	ret = asus_kbd_set_report(hdev, buf_init_start, sizeof(buf_init_start));
	if (ret < 0) {
		hid_warn(hdev, "Asus failed to send init start command: %d\n", ret);
		return ret;
	}
	/* Followed by a string */
	ret = asus_kbd_set_report(hdev, buf_init2, sizeof(buf_init2));
	if (ret < 0) {
		hid_warn(hdev, "Asus failed to send init command 1.0: %d\n", ret);
		return ret;
	}

etc. ? This (return on first error) is the normal way of dealing with things like this in the kernel.

Otherwise this looks good to me.

Regards,

Hans

Quoted 115 lines
drivers/hid/hid-asus.c +54 -13
+	/* Followed by a string */
+	ret = asus_kbd_set_report(hdev, buf_init3, sizeof(buf_init3));
+	if (ret < 0)
+		hid_warn(hdev, "Asus failed to send init command 1.1: %d\n", ret);
+
+	/* begin second report ID with same data */
+	buf_init2[0] = FEATURE_KBD_LED_REPORT_ID2;
+	buf_init3[0] = FEATURE_KBD_LED_REPORT_ID2;
+
+	ret = asus_kbd_set_report(hdev, buf_init2, sizeof(buf_init2));
+	if (ret < 0)
+		hid_warn(hdev, "Asus failed to send init command 2.0: %d\n", ret);
+
+	ret = asus_kbd_set_report(hdev, buf_init3, sizeof(buf_init3));
+	if (ret < 0)
+		hid_warn(hdev, "Asus failed to send init command 2.1: %d\n", ret);
+
+	return ret;
+}
+
 static void asus_kbd_backlight_set(struct led_classdev *led_cdev,
 				   enum led_brightness brightness)
 {
@@ -460,19 +527,25 @@ static int asus_kbd_register_leds(struct hid_device *hdev)
 	unsigned char kbd_func;
 	int ret;
 
-	/* Initialize keyboard */
-	ret = asus_kbd_init(hdev);
-	if (ret < 0)
-		return ret;
+	if (drvdata->quirks & QUIRK_ROG_NKEY_KEYBOARD) {
+		ret = rog_nkey_led_init(hdev);
+		if (ret < 0)
+			return ret;
+	} else {
+		/* Initialize keyboard */
+		ret = asus_kbd_init(hdev);
+		if (ret < 0)
+			return ret;
 
-	/* Get keyboard functions */
-	ret = asus_kbd_get_functions(hdev, &kbd_func);
-	if (ret < 0)
-		return ret;
+		/* Get keyboard functions */
+		ret = asus_kbd_get_functions(hdev, &kbd_func);
+		if (ret < 0)
+			return ret;
 
-	/* Check for backlight support */
-	if (!(kbd_func & SUPPORT_KBD_BACKLIGHT))
-		return -ENODEV;
+		/* Check for backlight support */
+		if (!(kbd_func & SUPPORT_KBD_BACKLIGHT))
+			return -ENODEV;
+	}
 
 	drvdata->kbd_backlight = devm_kzalloc(&hdev->dev,
 					      sizeof(struct asus_kbd_leds),
@@ -751,8 +824,8 @@ static int asus_input_mapping(struct hid_device *hdev,
 	     usage->hid == (HID_UP_GENDEVCTRLS | 0x0026)))
 		return -1;
 
-	/* ASUS-specific keyboard hotkeys */
-	if ((usage->hid & HID_USAGE_PAGE) == 0xff310000) {
+	/* ASUS-specific keyboard hotkeys and led backlight */
+	if ((usage->hid & HID_USAGE_PAGE) == HID_UP_ASUSVENDOR) {
 		switch (usage->hid & HID_USAGE) {
 		case 0x10: asus_map_key_clear(KEY_BRIGHTNESSDOWN);	break;
 		case 0x20: asus_map_key_clear(KEY_BRIGHTNESSUP);		break;
@@ -780,6 +853,18 @@ static int asus_input_mapping(struct hid_device *hdev,
 		/* Fn+F5 "fan" symbol on FX503VD */
 		case 0x99: asus_map_key_clear(KEY_PROG4);		break;
 
+		/* Fn+F5 "fan" symbol on N-Key keyboard */
+		case 0xae: asus_map_key_clear(KEY_PROG4);		break;
+
+		/* Fn+Ret "Calc" symbol on N-Key keyboard */
+		case 0x92: asus_map_key_clear(KEY_CALC);		break;
+
+		/* Fn+Left Aura mode previous on N-Key keyboard */
+		case 0xb2: asus_map_key_clear(KEY_PROG2);		break;
+
+		/* Fn+Right Aura mode next on N-Key keyboard */
+		case 0xb3: asus_map_key_clear(KEY_PROG3);		break;
+
 		default:
 			/* ASUS lazily declares 256 usages, ignore the rest,
 			 * as some make the keyboard appear as a pointer device. */
@@ -1126,6 +1211,9 @@ static const struct hid_device_id asus_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK,
 		USB_DEVICE_ID_ASUSTEK_FX503VD_KEYBOARD),
 	  QUIRK_USE_KBD_BACKLIGHT },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK,
+	    USB_DEVICE_ID_ASUSTEK_ROG_NKEY_KEYBOARD),
+	  QUIRK_USE_KBD_BACKLIGHT | QUIRK_ROG_NKEY_KEYBOARD },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK,
 		USB_DEVICE_ID_ASUSTEK_T100TA_KEYBOARD),
 	  QUIRK_T100_KEYBOARD | QUIRK_NO_CONSUMER_USAGES },
drivers/hid/hid-ids.h +1 -1
index 6f370e020feb..c9f930ddcfd7 100644
@@ -190,6 +190,7 @@
 #define USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD1 0x1854
 #define USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD2 0x1837
 #define USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD3 0x1822
+#define USB_DEVICE_ID_ASUSTEK_ROG_NKEY_KEYBOARD	0x1866
 #define USB_DEVICE_ID_ASUSTEK_FX503VD_KEYBOARD	0x1869
 
 #define USB_VENDOR_ID_ATEN		0x0557
--

2.28.0

author
#2 lore raw

G'day Hans.

Quoted 1 line

Can you try using "git send-email" for the next version ?

I do. And I just figured out why this happens, I was editing the subject line in vim before sending, and I have a white-space removal thing happening on write :(

Quoted 1 line

initialized

Done

Quoted 1 line

Please for the next version put a changelog here.

Darn... I did add a good changelog but it seems to have been cut.

Quoted 123 lines
Quoted 95 lines
  drivers/hid/hid-asus.c | 116 
++++++++++++++++++++++++++++++++++++-----
  drivers/hid/hid-ids.h  |   1 +
  2 files changed, 103 insertions(+), 14 deletions(-)

diff --git a/drivers/hid/hid-asus.c b/drivers/hid/hid-asus.c index c183caf89d49..98b033b4951f 100644
--- a/drivers/hid/hid-asus.c
+++ b/drivers/hid/hid-asus.c
@@ -48,6 +48,8 @@ MODULE_DESCRIPTION("Asus HID Keyboard and
TouchPad");
#define INPUT_REPORT_ID 0x5d
#define FEATURE_KBD_REPORT_ID 0x5a
#define FEATURE_KBD_REPORT_SIZE 16
+#define FEATURE_KBD_LED_REPORT_ID1 0x5d
+#define FEATURE_KBD_LED_REPORT_ID2 0x5e

  #define SUPPORT_KBD_BACKLIGHT BIT(0)

@@ -80,6 +82,7 @@ MODULE_DESCRIPTION("Asus HID Keyboard and
TouchPad");
#define QUIRK_T101HA_DOCK BIT(9)
#define QUIRK_T90CHI BIT(10)
#define QUIRK_MEDION_E1239T BIT(11)
+#define QUIRK_ROG_NKEY_KEYBOARD BIT(12)

#define I2C_KEYBOARD_QUIRKS (QUIRK_FIX_NOTEBOOK_REPORT | \
QUIRK_NO_INIT_REPORTS | \
@@ -332,6 +335,28 @@ static int asus_raw_event(struct hid_device
*hdev,
if (drvdata->quirks & QUIRK_MEDION_E1239T)
return asus_e1239t_event(drvdata, data, size);

+ if (drvdata->quirks & QUIRK_ROG_NKEY_KEYBOARD) {
+ /*
+ * Skip these report ID, the device emits a continuous stream
associated
+ * with the AURA mode it is in which looks like an 'echo'.
+ */
+ if (report->id == FEATURE_KBD_LED_REPORT_ID1 ||
+ report->id == FEATURE_KBD_LED_REPORT_ID2) {
+ return -1;
+ /* Additional report filtering */
+ } else if (report->id == FEATURE_KBD_REPORT_ID) {
+ /*
+ * G14 and G15 send these codes on some keypresses with no
+ * discernable reason for doing so. We'll filter them out to
avoid
+ * unmapped warning messages later.
+ */
+ if (data[1] == 0xea || data[1] == 0xec || data[1] == 0x02 ||
+ data[1] == 0x8a || data[1] == 0x9e) {
+ return -1;
+ }
+ }
+ }
+
return 0;
}

@@ -344,7 +369,11 @@ static int asus_kbd_set_report(struct
hid_device *hdev, u8 *buf, size_t buf_size
if (!dmabuf)
return -ENOMEM;

- ret = hid_hw_raw_request(hdev, FEATURE_KBD_REPORT_ID, dmabuf,
+ /*
+ * The report ID should be set from the incoming buffer due to
LED and key
+ * interfaces having different pages
+ */
+ ret = hid_hw_raw_request(hdev, buf[0], dmabuf,
buf_size, HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
kfree(dmabuf);
@@ -397,6 +426,44 @@ static int asus_kbd_get_functions(struct
hid_device *hdev,
return ret;
}

+static int rog_nkey_led_init(struct hid_device *hdev) +{
+ u8 buf_init_start[] = { FEATURE_KBD_LED_REPORT_ID1, 0xB9 };
+ u8 buf_init2[] = { FEATURE_KBD_LED_REPORT_ID1, 0x41, 0x53, 0x55,
0x53, 0x20,
+ 0x54, 0x65, 0x63, 0x68, 0x2e, 0x49, 0x6e, 0x63, 0x2e, 0x00 };
+ u8 buf_init3[] = { FEATURE_KBD_LED_REPORT_ID1,
+ 0x05, 0x20, 0x31, 0x00, 0x08 };
+ int ret;
+
+ hid_info(hdev, "Asus initialise N-KEY Device");
+ /* The first message is an init start */
+ ret = asus_kbd_set_report(hdev, buf_init_start,
sizeof(buf_init_start));

Quoted 8 lines

+ if (ret < 0)
+ hid_warn(hdev, "Asus failed to send init start command: %d\n",
ret);
+ /* Followed by a string */
+ ret = asus_kbd_set_report(hdev, buf_init2, sizeof(buf_init2));
+ if (ret < 0)
+ hid_warn(hdev, "Asus failed to send init command 1.0: %d\n",
ret);

Hmm, so this construction means that the final return value of this function may be 0 even if some commands fail.

The actual led calls device registration will get skipped on a failure return; and we probably should skip that registration on any errors, so how about:

ret = asus_kbd_set_report(hdev, buf_init_start,

sizeof(buf_init_start));
	if (ret < 0) {
		hid_warn(hdev, "Asus failed to send init start command: %d\n", ret);
		return ret;
	}
	/* Followed by a string */
	ret = asus_kbd_set_report(hdev, buf_init2, sizeof(buf_init2));
	if (ret < 0) {
		hid_warn(hdev, "Asus failed to send init command 1.0: %d\n", ret);
		return ret;
	}
Quoted 3 lines

etc. ? This (return on first error) is the normal way of dealing with things like this in the kernel.

Done. Thanks for the pointer here.

I'll submit a v10, with changes from v8-v10 in the changelog. Sorry about that I'm really not sure at what stage the log got cut out.

Quoted 128 lines
Quoted 127 lines

+ /* Followed by a string */
+ ret = asus_kbd_set_report(hdev, buf_init3, sizeof(buf_init3));
+ if (ret < 0)
+ hid_warn(hdev, "Asus failed to send init command 1.1: %d\n",
ret);
+
+ /* begin second report ID with same data */
+ buf_init2[0] = FEATURE_KBD_LED_REPORT_ID2;
+ buf_init3[0] = FEATURE_KBD_LED_REPORT_ID2;
+
+ ret = asus_kbd_set_report(hdev, buf_init2, sizeof(buf_init2));
+ if (ret < 0)
+ hid_warn(hdev, "Asus failed to send init command 2.0: %d\n",
ret);
+
+ ret = asus_kbd_set_report(hdev, buf_init3, sizeof(buf_init3));
+ if (ret < 0)
+ hid_warn(hdev, "Asus failed to send init command 2.1: %d\n",
ret);
+
+ return ret;
+}
+
static void asus_kbd_backlight_set(struct led_classdev *led_cdev,
enum led_brightness brightness)
{
@@ -460,19 +527,25 @@ static int asus_kbd_register_leds(struct
hid_device *hdev)
unsigned char kbd_func;
int ret;

- /* Initialize keyboard */
- ret = asus_kbd_init(hdev);
- if (ret < 0)
- return ret;
+ if (drvdata->quirks & QUIRK_ROG_NKEY_KEYBOARD) {
+ ret = rog_nkey_led_init(hdev);
+ if (ret < 0)
+ return ret;
+ } else {
+ /* Initialize keyboard */
+ ret = asus_kbd_init(hdev);
+ if (ret < 0)
+ return ret;

- /* Get keyboard functions */
- ret = asus_kbd_get_functions(hdev, &kbd_func);
- if (ret < 0)
- return ret;
+ /* Get keyboard functions */
+ ret = asus_kbd_get_functions(hdev, &kbd_func);
+ if (ret < 0)
+ return ret;

- /* Check for backlight support */
- if (!(kbd_func & SUPPORT_KBD_BACKLIGHT))
- return -ENODEV;
+ /* Check for backlight support */
+ if (!(kbd_func & SUPPORT_KBD_BACKLIGHT))
+ return -ENODEV;
+ }

drvdata->kbd_backlight = devm_kzalloc(&hdev->dev,
sizeof(struct asus_kbd_leds),
@@ -751,8 +824,8 @@ static int asus_input_mapping(struct hid_device
*hdev,
usage->hid == (HID_UP_GENDEVCTRLS | 0x0026)))
return -1;

- /* ASUS-specific keyboard hotkeys */
- if ((usage->hid & HID_USAGE_PAGE) == 0xff310000) {
+ /* ASUS-specific keyboard hotkeys and led backlight */
+ if ((usage->hid & HID_USAGE_PAGE) == HID_UP_ASUSVENDOR) {
switch (usage->hid & HID_USAGE) {
case 0x10: asus_map_key_clear(KEY_BRIGHTNESSDOWN); break;
case 0x20: asus_map_key_clear(KEY_BRIGHTNESSUP); break;
@@ -780,6 +853,18 @@ static int asus_input_mapping(struct
hid_device *hdev,
/* Fn+F5 "fan" symbol on FX503VD */
case 0x99: asus_map_key_clear(KEY_PROG4); break;

+ /* Fn+F5 "fan" symbol on N-Key keyboard */
+ case 0xae: asus_map_key_clear(KEY_PROG4); break;
+
+ /* Fn+Ret "Calc" symbol on N-Key keyboard */
+ case 0x92: asus_map_key_clear(KEY_CALC); break;
+
+ /* Fn+Left Aura mode previous on N-Key keyboard */
+ case 0xb2: asus_map_key_clear(KEY_PROG2); break;
+
+ /* Fn+Right Aura mode next on N-Key keyboard */
+ case 0xb3: asus_map_key_clear(KEY_PROG3); break;
+
default:
/* ASUS lazily declares 256 usages, ignore the rest,
* as some make the keyboard appear as a pointer device. */
@@ -1126,6 +1211,9 @@ static const struct hid_device_id
asus_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK,
USB_DEVICE_ID_ASUSTEK_FX503VD_KEYBOARD),
QUIRK_USE_KBD_BACKLIGHT },
+ { HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK,
+ USB_DEVICE_ID_ASUSTEK_ROG_NKEY_KEYBOARD),
+ QUIRK_USE_KBD_BACKLIGHT | QUIRK_ROG_NKEY_KEYBOARD },
{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK,
USB_DEVICE_ID_ASUSTEK_T100TA_KEYBOARD),
QUIRK_T100_KEYBOARD | QUIRK_NO_CONSUMER_USAGES },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 6f370e020feb..c9f930ddcfd7 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -190,6 +190,7 @@
#define USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD1 0x1854
#define USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD2 0x1837
#define USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD3 0x1822
+#define USB_DEVICE_ID_ASUSTEK_ROG_NKEY_KEYBOARD 0x1866
#define USB_DEVICE_ID_ASUSTEK_FX503VD_KEYBOARD 0x1869

#define USB_VENDOR_ID_ATEN 0x0557
--
2.28.0

#3 lore raw

Hi,

Quoted 9 lines · Luke Jones

G'day Hans.

Quoted 1 line

Can you try using "git send-email" for the next version ?

I do. And I just figured out why this happens, I was editing the subject line in vim before sending, and I have a white-space removal thing happening on write :(

Quoted 7 lines
Quoted 1 line

initialized

Done

Quoted 1 line

Please for the next version put a changelog here.

Darn... I did add a good changelog but it seems to have been cut.

That probably has something todo with how you edit the patch in between.

Normally you would let git send-email take care of the git format-patch phase too and then contents in the commit message below the cut line will be preserved.

Note you can set the version in the subject directly when calling git send-email, there is no need to edit the patch for that.

git send-email should take all arguments which git format-patch accepts and git format-patch allows you to pass -v#, e.g. for version 9 you would pass -v9.

Quoted 109 lines
Quoted 109 lines
Quoted 82 lines

  drivers/hid/hid-asus.c | 116 ++++++++++++++++++++++++++++++++++++----- drivers/hid/hid-ids.h  |   1 +

  2 files changed, 103 insertions(+), 14 deletions(-)

 diff --git a/drivers/hid/hid-asus.c b/drivers/hid/hid-asus.c index c183caf89d49..98b033b4951f 100644
 --- a/drivers/hid/hid-asus.c
 +++ b/drivers/hid/hid-asus.c
 @@ -48,6 +48,8 @@ MODULE_DESCRIPTION("Asus HID Keyboard and TouchPad"); #define INPUT_REPORT_ID 0x5d
  #define FEATURE_KBD_REPORT_ID 0x5a
  #define FEATURE_KBD_REPORT_SIZE 16
 +#define FEATURE_KBD_LED_REPORT_ID1 0x5d
 +#define FEATURE_KBD_LED_REPORT_ID2 0x5e

  #define SUPPORT_KBD_BACKLIGHT BIT(0)

 @@ -80,6 +82,7 @@ MODULE_DESCRIPTION("Asus HID Keyboard and TouchPad"); #define QUIRK_T101HA_DOCK        BIT(9)
  #define QUIRK_T90CHI            BIT(10)
  #define QUIRK_MEDION_E1239T        BIT(11)
 +#define QUIRK_ROG_NKEY_KEYBOARD        BIT(12)

  #define I2C_KEYBOARD_QUIRKS            (QUIRK_FIX_NOTEBOOK_REPORT | \
                           QUIRK_NO_INIT_REPORTS | \
 @@ -332,6 +335,28 @@ static int asus_raw_event(struct hid_device *hdev, if (drvdata->quirks & QUIRK_MEDION_E1239T)
          return asus_e1239t_event(drvdata, data, size);

 +    if (drvdata->quirks & QUIRK_ROG_NKEY_KEYBOARD) {
 +        /*
 +         * Skip these report ID, the device emits a continuous stream associated +         * with the AURA mode it is in which looks like an 'echo'. +        */
 +        if (report->id == FEATURE_KBD_LED_REPORT_ID1 ||
 +                report->id == FEATURE_KBD_LED_REPORT_ID2) {
 +            return -1;
 +        /* Additional report filtering */
 +        } else if (report->id == FEATURE_KBD_REPORT_ID) {
 +            /*
 +             * G14 and G15 send these codes on some keypresses with no +             * discernable reason for doing so. We'll filter them out to avoid +             * unmapped warning messages later.
 +            */
 +            if (data[1] == 0xea || data[1] == 0xec || data[1] == 0x02 || +                    data[1] == 0x8a || data[1] == 0x9e) {
 +                return -1;
 +            }
 +        }
 +    }
 +
      return 0;
  }

 @@ -344,7 +369,11 @@ static int asus_kbd_set_report(struct hid_device *hdev, u8 *buf, size_t buf_size if (!dmabuf)
          return -ENOMEM;

 -    ret = hid_hw_raw_request(hdev, FEATURE_KBD_REPORT_ID, dmabuf, +    /*
 +     * The report ID should be set from the incoming buffer due to LED and key +     * interfaces having different pages
 +    */
 +    ret = hid_hw_raw_request(hdev, buf[0], dmabuf,
                   buf_size, HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
      kfree(dmabuf);
 @@ -397,6 +426,44 @@ static int asus_kbd_get_functions(struct hid_device *hdev, return ret;
  }

 +static int rog_nkey_led_init(struct hid_device *hdev)
 +{
 +    u8 buf_init_start[] = { FEATURE_KBD_LED_REPORT_ID1, 0xB9 };
 +    u8 buf_init2[] = { FEATURE_KBD_LED_REPORT_ID1, 0x41, 0x53, 0x55, 0x53, 0x20, +                0x54, 0x65, 0x63, 0x68, 0x2e, 0x49, 0x6e, 0x63, 0x2e, 0x00 }; +    u8 buf_init3[] = { FEATURE_KBD_LED_REPORT_ID1,
 +                        0x05, 0x20, 0x31, 0x00, 0x08 };
 +    int ret;
 +
 +    hid_info(hdev, "Asus initialise N-KEY Device");

Quoted 8 lines

 +    /* The first message is an init start */
 +    ret = asus_kbd_set_report(hdev, buf_init_start, sizeof(buf_init_start)); +    if (ret < 0)
 +        hid_warn(hdev, "Asus failed to send init start command: %d\n", ret); +    /* Followed by a string */
 +    ret = asus_kbd_set_report(hdev, buf_init2, sizeof(buf_init2)); +    if (ret < 0)
 +        hid_warn(hdev, "Asus failed to send init command 1.0: %d\n", ret);

Hmm, so this construction means that the final return value of this function may be 0 even if some commands fail.

The actual led calls device registration will get skipped on a failure return; and we probably should skip that registration on any errors, so how about:

    ret = asus_kbd_set_report(hdev, buf_init_start, sizeof(buf_init_start)); if (ret < 0) {
        hid_warn(hdev, "Asus failed to send init start command: %d\n", ret); return ret;
    }
    /* Followed by a string */
    ret = asus_kbd_set_report(hdev, buf_init2, sizeof(buf_init2)); if (ret < 0) {
        hid_warn(hdev, "Asus failed to send init command 1.0: %d\n", ret); return ret;
    }

Quoted 7 lines
Quoted 3 lines

etc. ?  This (return on first error) is the normal way of dealing with things like this in the kernel.

Done. Thanks for the pointer here.

I'll submit a v10, with changes from v8-v10 in the changelog.

Great, thank you.

Quoted 2 lines

Sorry about that
I'm really not sure at what stage the log got cut out.

No problem.

Regards,

Hans

Quoted 124 lines
Quoted 122 lines
Quoted 121 lines

 +    /* Followed by a string */
 +    ret = asus_kbd_set_report(hdev, buf_init3, sizeof(buf_init3)); +    if (ret < 0)
 +        hid_warn(hdev, "Asus failed to send init command 1.1: %d\n", ret); +
 +    /* begin second report ID with same data */
 +    buf_init2[0] = FEATURE_KBD_LED_REPORT_ID2;
 +    buf_init3[0] = FEATURE_KBD_LED_REPORT_ID2;
 +
 +    ret = asus_kbd_set_report(hdev, buf_init2, sizeof(buf_init2)); +    if (ret < 0)
 +        hid_warn(hdev, "Asus failed to send init command 2.0: %d\n", ret); +
 +    ret = asus_kbd_set_report(hdev, buf_init3, sizeof(buf_init3)); +    if (ret < 0)
 +        hid_warn(hdev, "Asus failed to send init command 2.1: %d\n", ret); +
 +    return ret;
 +}
 +
  static void asus_kbd_backlight_set(struct led_classdev *led_cdev, enum led_brightness brightness)
  {
 @@ -460,19 +527,25 @@ static int asus_kbd_register_leds(struct hid_device *hdev) unsigned char kbd_func;
      int ret;

 -    /* Initialize keyboard */
 -    ret = asus_kbd_init(hdev);
 -    if (ret < 0)
 -        return ret;
 +    if (drvdata->quirks & QUIRK_ROG_NKEY_KEYBOARD) { +        ret = rog_nkey_led_init(hdev);
 +        if (ret < 0)
 +            return ret;
 +    } else {
 +        /* Initialize keyboard */
 +        ret = asus_kbd_init(hdev);
 +        if (ret < 0)
 +            return ret;

 -    /* Get keyboard functions */
 -    ret = asus_kbd_get_functions(hdev, &kbd_func); -    if (ret < 0)
 -        return ret;
 +        /* Get keyboard functions */
 +        ret = asus_kbd_get_functions(hdev, &kbd_func); +        if (ret < 0)
 +            return ret;

 -    /* Check for backlight support */
 -    if (!(kbd_func & SUPPORT_KBD_BACKLIGHT)) -        return -ENODEV;
 +        /* Check for backlight support */ +        if (!(kbd_func & SUPPORT_KBD_BACKLIGHT)) +            return -ENODEV;
 +    }

      drvdata->kbd_backlight = devm_kzalloc(&hdev->dev, sizeof(struct asus_kbd_leds),
 @@ -751,8 +824,8 @@ static int asus_input_mapping(struct hid_device *hdev, usage->hid == (HID_UP_GENDEVCTRLS | 0x0026)))
          return -1;

 -    /* ASUS-specific keyboard hotkeys */
 -    if ((usage->hid & HID_USAGE_PAGE) == 0xff310000) {
 +    /* ASUS-specific keyboard hotkeys and led backlight */
 +    if ((usage->hid & HID_USAGE_PAGE) == HID_UP_ASUSVENDOR) { switch (usage->hid & HID_USAGE) {
          case 0x10: asus_map_key_clear(KEY_BRIGHTNESSDOWN);    break; case 0x20: asus_map_key_clear(KEY_BRIGHTNESSUP);        break; @@ -780,6 +853,18 @@ static int asus_input_mapping(struct hid_device *hdev, /* Fn+F5 "fan" symbol on FX503VD */
          case 0x99: asus_map_key_clear(KEY_PROG4);        break;

 +        /* Fn+F5 "fan" symbol on N-Key keyboard */
 +        case 0xae: asus_map_key_clear(KEY_PROG4);        break; +
 +        /* Fn+Ret "Calc" symbol on N-Key keyboard */
 +        case 0x92: asus_map_key_clear(KEY_CALC);        break; +
 +        /* Fn+Left Aura mode previous on N-Key keyboard */
 +        case 0xb2: asus_map_key_clear(KEY_PROG2);        break; +
 +        /* Fn+Right Aura mode next on N-Key keyboard */
 +        case 0xb3: asus_map_key_clear(KEY_PROG3);        break; +
          default:
              /* ASUS lazily declares 256 usages, ignore the rest,
               * as some make the keyboard appear as a pointer device. */ @@ -1126,6 +1211,9 @@ static const struct hid_device_id asus_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_FX503VD_KEYBOARD), QUIRK_USE_KBD_BACKLIGHT },
 +    { HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK,
 +        USB_DEVICE_ID_ASUSTEK_ROG_NKEY_KEYBOARD),
 +      QUIRK_USE_KBD_BACKLIGHT | QUIRK_ROG_NKEY_KEYBOARD },
      { HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_T100TA_KEYBOARD), QUIRK_T100_KEYBOARD | QUIRK_NO_CONSUMER_USAGES },
 diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 6f370e020feb..c9f930ddcfd7 100644
 --- a/drivers/hid/hid-ids.h
 +++ b/drivers/hid/hid-ids.h
 @@ -190,6 +190,7 @@
  #define USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD1 0x1854
  #define USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD2 0x1837
  #define USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD3 0x1822
 +#define USB_DEVICE_ID_ASUSTEK_ROG_NKEY_KEYBOARD    0x1866 #define USB_DEVICE_ID_ASUSTEK_FX503VD_KEYBOARD    0x1869

  #define USB_VENDOR_ID_ATEN        0x0557
 --
 2.28.0

author
#4 lore raw
Quoted 10 lines · Hans de Goede

Normally you would let git send-email take care of the git format-patch phase too and then contents in the commit message below the cut line will be preserved.

Note you can set the version in the subject directly when calling git send-email, there is no need to edit the patch for that.

git send-email should take all arguments which git format-patch accepts and git format-patch allows you to pass -v#, e.g. for version 9 you would pass -v9.

Yeah, learned that the hard way. I was doing a git format-patch then sending that but editing it to add the Vn postfix. For the new version I found an article whcih clarified things a bit for me and I used git send-email -v10 -1 etc.

Many many thanks for everyone for their time and patience. It's been a journey.

Quoted 298 lines
Quoted 137 lines
Quoted 137 lines
Quoted 102 lines


   drivers/hid/hid-asus.c | 116 
++++++++++++++++++++++++++++++++++++-----
   drivers/hid/hid-ids.h  |   1 +
   2 files changed, 103 insertions(+), 14 deletions(-)

diff --git a/drivers/hid/hid-asus.c b/drivers/hid/hid-asus.c index c183caf89d49..98b033b4951f 100644
--- a/drivers/hid/hid-asus.c
+++ b/drivers/hid/hid-asus.c
@@ -48,6 +48,8 @@ MODULE_DESCRIPTION("Asus HID Keyboard and

TouchPad");
   #define INPUT_REPORT_ID 0x5d
   #define FEATURE_KBD_REPORT_ID 0x5a
   #define FEATURE_KBD_REPORT_SIZE 16

+#define FEATURE_KBD_LED_REPORT_ID1 0x5d
+#define FEATURE_KBD_LED_REPORT_ID2 0x5e

   #define SUPPORT_KBD_BACKLIGHT BIT(0)

@@ -80,6 +82,7 @@ MODULE_DESCRIPTION("Asus HID Keyboard and

TouchPad");
   #define QUIRK_T101HA_DOCK        BIT(9)
   #define QUIRK_T90CHI            BIT(10)
   #define QUIRK_MEDION_E1239T        BIT(11)

+#define QUIRK_ROG_NKEY_KEYBOARD BIT(12)

   #define I2C_KEYBOARD_QUIRKS            
(QUIRK_FIX_NOTEBOOK_REPORT | \
                            QUIRK_NO_INIT_REPORTS | \
  @@ -332,6 +335,28 @@ static int asus_raw_event(struct hid_device 
*hdev,
       if (drvdata->quirks & QUIRK_MEDION_E1239T)
           return asus_e1239t_event(drvdata, data, size);

+ if (drvdata->quirks & QUIRK_ROG_NKEY_KEYBOARD) {
+ /*
+ * Skip these report ID, the device emits a continuous
stream associated
+ * with the AURA mode it is in which looks like an
'echo'.
+ */
+ if (report->id == FEATURE_KBD_LED_REPORT_ID1 ||
+ report->id == FEATURE_KBD_LED_REPORT_ID2) {
+ return -1;
+ /* Additional report filtering */
+ } else if (report->id == FEATURE_KBD_REPORT_ID) {
+ /*
+ * G14 and G15 send these codes on some keypresses
with no
+ * discernable reason for doing so. We'll filter
them out to avoid
+ * unmapped warning messages later.
+ */
+ if (data[1] == 0xea || data[1] == 0xec || data[1]
== 0x02 ||
+ data[1] == 0x8a || data[1] == 0x9e) {
+ return -1;
+ }
+ }
+ }
+

       return 0;

}

@@ -344,7 +369,11 @@ static int asus_kbd_set_report(struct
hid_device *hdev, u8 *buf, size_t buf_size

       if (!dmabuf)
           return -ENOMEM;

- ret = hid_hw_raw_request(hdev, FEATURE_KBD_REPORT_ID,
dmabuf,
+ /*
+ * The report ID should be set from the incoming buffer due
to LED and key
+ * interfaces having different pages
+ */
+ ret = hid_hw_raw_request(hdev, buf[0], dmabuf,

                    buf_size, HID_FEATURE_REPORT,
                    HID_REQ_SET_REPORT);
       kfree(dmabuf);
  @@ -397,6 +426,44 @@ static int asus_kbd_get_functions(struct 
hid_device *hdev,
       return ret;

}

+static int rog_nkey_led_init(struct hid_device *hdev) +{
+ u8 buf_init_start[] = { FEATURE_KBD_LED_REPORT_ID1, 0xB9 };
+ u8 buf_init2[] = { FEATURE_KBD_LED_REPORT_ID1, 0x41, 0x53,
0x55, 0x53, 0x20,
+ 0x54, 0x65, 0x63, 0x68, 0x2e, 0x49, 0x6e, 0x63,
0x2e, 0x00 };
+ u8 buf_init3[] = { FEATURE_KBD_LED_REPORT_ID1,
+ 0x05, 0x20, 0x31, 0x00, 0x08 };
+ int ret;
+

  +    hid_info(hdev, "Asus initialise N-KEY Device");
  +    /* The first message is an init start */
  +    ret = asus_kbd_set_report(hdev, buf_init_start, 
Quoted 10 lines

sizeof(buf_init_start));
+ if (ret < 0)
+ hid_warn(hdev, "Asus failed to send init start command:
%d\n", ret);
+ /* Followed by a string */
+ ret = asus_kbd_set_report(hdev, buf_init2,
sizeof(buf_init2));
+ if (ret < 0)
+ hid_warn(hdev, "Asus failed to send init command 1.0:
%d\n", ret);

Hmm, so this construction means that the final return value of
this function
may be 0 even if some commands fail.

The actual led calls device registration will get skipped on a
failure return;
and we probably should skip that registration on any errors, so
how about:

ret = asus_kbd_set_report(hdev, buf_init_start,
sizeof(buf_init_start));
if (ret < 0) {
hid_warn(hdev, "Asus failed to send init start command:

%d\n", ret);
         return ret;
     }
     /* Followed by a string */
     ret = asus_kbd_set_report(hdev, buf_init2, sizeof(buf_init2));
     if (ret < 0) {
         hid_warn(hdev, "Asus failed to send init command 1.0: 
%d\n", ret);
         return ret;
     }
Quoted 8 lines
Quoted 4 lines

etc. ? This (return on first error) is the normal way of dealing
with things
like this in the kernel.

Done. Thanks for the pointer here.

I'll submit a v10, with changes from v8-v10 in the changelog.

Great, thank you.

Quoted 2 lines

Sorry about that
I'm really not sure at what stage the log got cut out.

No problem.

Regards,

Hans

Quoted 138 lines
Quoted 136 lines
Quoted 135 lines

+ /* Followed by a string */
+ ret = asus_kbd_set_report(hdev, buf_init3,
sizeof(buf_init3));
+ if (ret < 0)
+ hid_warn(hdev, "Asus failed to send init command 1.1:
%d\n", ret);
+

  +    /* begin second report ID with same data */
  +    buf_init2[0] = FEATURE_KBD_LED_REPORT_ID2;
  +    buf_init3[0] = FEATURE_KBD_LED_REPORT_ID2;

+
+ ret = asus_kbd_set_report(hdev, buf_init2,
sizeof(buf_init2));
+ if (ret < 0)
+ hid_warn(hdev, "Asus failed to send init command 2.0:
%d\n", ret);
+
+ ret = asus_kbd_set_report(hdev, buf_init3,
sizeof(buf_init3));
+ if (ret < 0)
+ hid_warn(hdev, "Asus failed to send init command 2.1:
%d\n", ret);
+
+ return ret;
+}
+
static void asus_kbd_backlight_set(struct led_classdev
*led_cdev,
enum led_brightness brightness)
{
@@ -460,19 +527,25 @@ static int asus_kbd_register_leds(struct
hid_device *hdev)

       unsigned char kbd_func;
       int ret;
  -    /* Initialize keyboard */
  -    ret = asus_kbd_init(hdev);
  -    if (ret < 0)
  -        return ret;
  +    if (drvdata->quirks & QUIRK_ROG_NKEY_KEYBOARD) {
  +        ret = rog_nkey_led_init(hdev);
  +        if (ret < 0)
  +            return ret;
  +    } else {
  +        /* Initialize keyboard */
  +        ret = asus_kbd_init(hdev);
  +        if (ret < 0)

+ return ret;

  -    /* Get keyboard functions */
  -    ret = asus_kbd_get_functions(hdev, &kbd_func);
  -    if (ret < 0)
  -        return ret;
  +        /* Get keyboard functions */
  +        ret = asus_kbd_get_functions(hdev, &kbd_func);
  +        if (ret < 0)

+ return ret;

- /* Check for backlight support */
- if (!(kbd_func & SUPPORT_KBD_BACKLIGHT))

  -        return -ENODEV;
  +        /* Check for backlight support */
  +        if (!(kbd_func & SUPPORT_KBD_BACKLIGHT))

+ return -ENODEV;
+ }

       drvdata->kbd_backlight = devm_kzalloc(&hdev->dev,
                             sizeof(struct asus_kbd_leds),
  @@ -751,8 +824,8 @@ static int asus_input_mapping(struct 
hid_device *hdev,
            usage->hid == (HID_UP_GENDEVCTRLS | 0x0026)))
           return -1;
  -    /* ASUS-specific keyboard hotkeys */
  -    if ((usage->hid & HID_USAGE_PAGE) == 0xff310000) {
  +    /* ASUS-specific keyboard hotkeys and led backlight */
  +    if ((usage->hid & HID_USAGE_PAGE) == HID_UP_ASUSVENDOR) {
           switch (usage->hid & HID_USAGE) {
           case 0x10: asus_map_key_clear(KEY_BRIGHTNESSDOWN);    
break;
           case 0x20: asus_map_key_clear(KEY_BRIGHTNESSUP);        
break;
  @@ -780,6 +853,18 @@ static int asus_input_mapping(struct 
hid_device *hdev,
           /* Fn+F5 "fan" symbol on FX503VD */
           case 0x99: asus_map_key_clear(KEY_PROG4);        break;

+ /* Fn+F5 "fan" symbol on N-Key keyboard */
+ case 0xae: asus_map_key_clear(KEY_PROG4); break;
+
+ /* Fn+Ret "Calc" symbol on N-Key keyboard */
+ case 0x92: asus_map_key_clear(KEY_CALC); break;
+
+ /* Fn+Left Aura mode previous on N-Key keyboard */
+ case 0xb2: asus_map_key_clear(KEY_PROG2); break;
+
+ /* Fn+Right Aura mode next on N-Key keyboard */
+ case 0xb3: asus_map_key_clear(KEY_PROG3); break;
+
default:
/* ASUS lazily declares 256 usages, ignore the rest,
* as some make the keyboard appear as a pointer
device. */
@@ -1126,6 +1211,9 @@ static const struct hid_device_id
asus_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK,
USB_DEVICE_ID_ASUSTEK_FX503VD_KEYBOARD),
QUIRK_USE_KBD_BACKLIGHT },
+ { HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK,
+ USB_DEVICE_ID_ASUSTEK_ROG_NKEY_KEYBOARD),
+ QUIRK_USE_KBD_BACKLIGHT | QUIRK_ROG_NKEY_KEYBOARD },
{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK,
USB_DEVICE_ID_ASUSTEK_T100TA_KEYBOARD),
QUIRK_T100_KEYBOARD | QUIRK_NO_CONSUMER_USAGES },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 6f370e020feb..c9f930ddcfd7 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -190,6 +190,7 @@

   #define USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD1 0x1854
   #define USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD2 0x1837
   #define USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD3 0x1822

+#define USB_DEVICE_ID_ASUSTEK_ROG_NKEY_KEYBOARD 0x1866
#define USB_DEVICE_ID_ASUSTEK_FX503VD_KEYBOARD 0x1869

   #define USB_VENDOR_ID_ATEN        0x0557
  --
  2.28.0