serial debug during init
My target is a PPC 440 Spe processor.
In the ./lib_ppc/board.c file there is a debug function to dump serial status during the init process.
I presume there is some compile option to activate this feature!
Can someone point me in the right direction please?
regards,
WO
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.409 / Virus Database: 268.15.15/581 - Release Date: 09/12/2006 -------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20061211/725658eb/attachment.htm
Dear William,
Quoted 5 lines · in message <[email protected]> you wrote:
In the
./lib_ppc/board.cfile there is a debug function to dump serial status during the init process.I presume there is some compile option to activate this feature!
Please feel free to remove the '#' which comments out the "-DDEBUG" part in the definition of DBGFLAGS in "config.mk". But note that this might turn on much mnore debug output than you are interested in. Adding a "#define DEBUG" before the first #include line in the file(s) you want to get debug output from is probably less noisy.
Best regards,
Wolfgang Denk
Signature · 4 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de All men should freely use those seven words which have the power to make any marriage run smoothly: You know dear, you may be right.