Skip to contentSkip to conversation

System.map does not match kernel data in 2.4.22

DISCUSSION Alex Adriaanse 1 participant 1 message Sep 5, 2003

lore
Share & tools
lore
#0 lore raw

Hi there,

I recently upgraded to kernel 2.4.22 from 2.4.20. After I upgraded and with the st module loaded I started to get the following error messages when running programs like ps:
{__ide_do_rw_disk} {GPLONLY___ide_do_rw_disk}
Warning: /boot/System.map-2.4.22 does not match kernel data. {__ide_do_rw_disk} {GPLONLY___ide_do_rw_disk}
Warning: /usr/src/linux/System.map does not match kernel data.

However, when I unloaded the st module these error messages go away, and when I reload the module the messages reappear. I don't see anything suspicious in dmesg after (un)loading the module.

I tried unpacking the kernel tar file to a new directory, then running make distclean; make menuconfig; make dep; make bzImage; make modules, and then went on to delete /lib/modules/2.4.22 and replacing the contents through make modules_install, and overwrote /boot/vmlinuz-2.4.22 with /usr/src/linux/arch/i386/boot/bzImage and overwrote /boot/System.map-2.4.22 with /usr/src/linux/System.map. I even went ahead and replaced the contents of /usr/include/{asm,linux,scsi} with the contents from /usr/src/linux/include/{asm,linux,scsi}. The problem did not go away.

I did not get these error messages in 2.4.20.

I've attached my .config file, in case it helps. Also, this is the output of ver_linux:
Linux homer 2.4.22 #1 Fri Sep 5 01:06:28 CDT 2003 i686 unknown

Gnu C                  2.95.4
Gnu make               3.79.1
util-linux             2.11n
mount                  2.11n
modutils               2.4.15
e2fsprogs              1.27
reiserfsprogs          3.x.1b
Linux C Library        2.2.5
Dynamic linker (ldd)   2.2.5
Procps                 2.0.7
Net-tools              1.60
Console-tools          0.2.3
Sh-utils               2.0.11
Modules Loaded         iptable_filter ipt_REDIRECT iptable_nat ip_conntrack

ip_tables loop airo printer usb-uhci usbcore e100 rtc

I'm also running version 2.12.90.0.1 of binutils, and my distribution is Debian Linux 3.0.

Any ideas on how I can go about fixing this problem? Please let me know if you want any additional information.

Thanks a lot,

Alex