RH9 >W2000>INTERNET
Hello guys,
since I have a problem to connectmy RH9 machine through W2000 machine to Internet, would anybody tell me how to find a solution.
Thanks, Nikola
_________________________________________________________________
Get a FREE computer virus scan online from McAfee. http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Quoted 3 lines · Nikola Vusovic
Hello guys,
since I have a problem to connectmy RH9 machine through W2000 machine to Internet, would anybody tell me how to find a solution.
Well, asking here is a good way to start. But if you are using a Win2K host as your router, your problems are more likely to require Windows than Linux expertise, so you might want to look for a Win2K support list as well as a Linux one. Some people here have some familiarity with one or another version of WIndows, but this really is not the list to turn to for help configuring a Windows router.
As to the possible Linux side of the problem, a good start would be to report here the following:
1. Describe the actual problem you are having. What do you try and what error (or other failure) do you see)?
2. Provide this information about the configuration of the Linux host:
complete, unedited output of "ifconfig -a"
complete, unedited output of "netstat -nr"
how you are assigning the Linux host its IP address and routing
table (static? dhcp? something else?)
3. Describe the physical setup. How does the Linux host communicate with the Win2K host? How does the Win2K host communicate with the Internet? Does the WIn2K hot have 1 or 2 physical interfaces? 1 or 2 logical interfaces (IP addresses)?
4. Does the Linux host have a real (routable) IP address or a private (RFC1918) IP address that requires the Win2K host to NAT the Linux host's connection to the Internet? (The answer to #2 should indicate this, but it always pays to double check this one, I've found.) If the second, do you have the Win2K system set up properly both to route and to NAT (no, I don't know Win2K well enough to tell you how to do this)?
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Wireless Lan
Anyone here know where I can find a could set of instructions for setting up wireless on a linux laptop?
I need do figure out how to:
1. get my wireless card into the database that cardmngr uses, because it just looks blankly at me when I insert a card and tells me that a hot switchable card has been inserted and doesn't know what file to associate with it, and I don't know how to tell it, when this hardware id it entered associate it with this driver file.
2. Also, I've been using http://linux.wlan.org to try to set it up because it says it supports my card, but the instruction don't actually include anything on what do do have you have successfully compiled it and installed it, and again it just stares at me blankly. It includes about 30 scripts and maybe I'll be able to get it to do something when I get the cardmgr working, but I really wish someone there was working are documenting how to use it, not just how to compile and install it.
3. Configuration is ambigous at best, but I figure I'll be able to get it working by playing around with it once I've figured out what file I need to assosicate with my wireless card and how to get cardmgr to stop looking at me blankly.
Specs
i386 (Mandrake 9.1)
gcc 3.2
my card is the
Linksys 802.11a/g WPC55AG Cardbus Atheros
Any help, or pointers towards help would be very nice.
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Re: Wireless Lan
Hello John , Try ... , Hth , JimL http://www.linux-wlan.org/
Quoted 25 lines · John T. Williams
Anyone here know where I can find a could set of instructions for setting up wireless on a linux laptop?
I need do figure out how to:
1. get my wireless card into the database that cardmngr uses, because it just looks blankly at me when I insert a card and tells me that a hot switchable card has been inserted and doesn't know what file to associate with it, and I don't know how to tell it, when this hardware id it entered associate it with this driver file.
2. Also, I've been using http://linux.wlan.org to try to set it up because it says it supports my card, but the instruction don't actually include anything on what do do have you have successfully compiled it and installed it, and again it just stares at me blankly. It includes about 30 scripts and maybe I'll be able to get it to do something when I get the cardmgr working, but I really wish someone there was working are documenting how to use it, not just how to compile and install it.
3. Configuration is ambigous at best, but I figure I'll be able to get it working by playing around with it once I've figured out what file I need to assosicate with my wireless card and how to get cardmgr to stop looking at me blankly.
Specs
i386 (Mandrake 9.1)
gcc 3.2
my card is the
Linksys 802.11a/g WPC55AG Cardbus Atheros
Any help, or pointers towards help would be very nice.
Signature · 10 lines
+------------------------------------------------------------------+
| James W. Laferriere | System Techniques | Give me VMS |
| Network Engineer | P.O. Box 854 | Give me Linux |
| [email protected] | Coudersport PA 16915 | only on AXP |
+------------------------------------------------------------------+
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs