Skip to contentSkip to conversation

Hammerfall DSP System Problems

DISCUSSION [email protected] 3 participants 3 messages Jun 5, 2003 – Jun 6, 2003

lore
Share & tools
lore
#0 lore raw

Hello,
I recently purchased a Hammerfall DSP system to use on Windows and
especially LINUX for use on Ardour. I have the multiface system. I must say I am confused on the support of the newest version of this pci card (I know that I have firmware version 11). I downloaded the current CVS on alsa-dev and compiled it fine. However when I run modprobe I get the following error:

/sbin/modprobe snd-hdsp
/lib/modules/2.4.18-3/kernel/sound/pci/rme9652/snd-hdsp.o:
init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters /lib/modules/2.4.18-3/kernel/sound/pci/rme9652/snd-hdsp.o: insmod /lib/modules/2.4.18-3/kernel/sound/pci/rme9652/snd-hdsp.o failed /lib/modules/2.4.18-3/kernel/sound/pci/rme9652/snd-hdsp.o: insmod snd-hdsp failed

Then when I just offer the command insmod snd-hdsp I get the following:

/sbin/insmod snd-hdsp
Using /lib/modules/2.4.18-3/kernel/sound/pci/rme9652/snd-hdsp.o /lib/modules/2.4.18-3/kernel/sound/pci/rme9652/snd-hdsp.o: unresolved symbol snd_hammerfall_get_buffer_R5bab1fdf /lib/modules/2.4.18-3/kernel/sound/pci/rme9652/snd-hdsp.o: unresolved symbol snd_rawmidi_receive_R1e37534c /lib/modules/2.4.18-3/kernel/sound/pci/rme9652/snd-hdsp.o: unresolved symbol snd_rawmidi_transmit_Rf1a57f87 /lib/modules/2.4.18-3/kernel/sound/pci/rme9652/snd-hdsp.o: unresolved symbol snd_hwdep_new_Rcd2873ef /lib/modules/2.4.18-3/kernel/sound/pci/rme9652/snd-hdsp.o: unresolved symbol snd_rawmidi_new_R0bc1cb4d /lib/modules/2.4.18-3/kernel/sound/pci/rme9652/snd-hdsp.o: unresolved symbol snd_rawmidi_set_ops_Rc12d8ec9 /lib/modules/2.4.18-3/kernel/sound/pci/rme9652/snd-hdsp.o: unresolved symbol snd_rawmidi_transmit_empty_R1a8b7b46 /lib/modules/2.4.18-3/kernel/sound/pci/rme9652/snd-hdsp.o: unresolved symbol snd_hammerfall_free_buffer_R4d176ca0

/var/log/messages gives me the following:

Jun  5 17:17:00 musicman kernel: Hammerfall memory allocator: buffers 
allocated 
for 1 cards 
Jun  5 17:17:00 musicman kernel: RME Hammerfall-DSP: no cards found 
Jun  5 17:30:40 musicman kernel: Hammerfall memory allocator: buffers 
allocated 
for 1 cards 
Jun  5 17:30:40 musicman kernel: RME Hammerfall-DSP: no cards found 
Jun  5 17:30:40 musicman insmod: 
/lib/modules/2.4.18-3/kernel/sound/pci/rme9652/ 
snd-hdsp.o: init_module: No such device 
Jun  5 17:30:40 musicman insmod: Hint: insmod errors can be caused by 
incorrect 
module parameters, including invalid IO or IRQ parameters 
Jun  5 17:30:40 musicman insmod: 
/lib/modules/2.4.18-3/kernel/sound/pci/rme9652/ 
snd-hdsp.o: insmod snd-card-0 failed 
Jun  5 17:30:40 musicman kernel: Hammerfall memory allocator: buffers 
allocated 
for 1 cards 
Jun  5 17:30:40 musicman kernel: RME Hammerfall-DSP: no cards found 
Jun  5 17:30:40 musicman insmod: 
/lib/modules/2.4.18-3/kernel/sound/pci/rme9652/ 
snd-hdsp.o: init_module: No such device 
Jun  5 17:30:40 musicman insmod: Hint: insmod errors can be caused by 
incorrect 
module parameters, including invalid IO or IRQ parameters 
Jun  5 17:30:40 musicman insmod: 

/lib/modules/2.4.18-3/kernel/sound/pci/rme9652/
snd-hdsp.o: insmod snd-card-0 failed

When I run hdsploader it completes but says nothing like this:

hdsploader - firmware loader for RME Hammerfall DSP cards Looking for HDSP + Multiface or Digiface cards :

I have the multiface connected while I run it. I am really confused with this card and driver. I am new to alsa but not to Linux. I would really like to run this card. Any help will be great. However, if this situation has been resolved I am sorry. I just need to be pointed in the right direction.

Thanks,
Frank Emanuele

--------------------------------------------------------------------------
Looking for a roommate? Let CollegeClub.com help you out!
<http://navisite.collegeclub.com/channels/college/>

CollegeClub.com makes college life even better.

#1 lore raw
Quoted 6 lines

I recently purchased a Hammerfall DSP system to use on Windows and
especially LINUX for use on Ardour. I have the multiface system. I must say I am confused on the support of the newest version of this pci card (I know that I have firmware version 11). I downloaded the current CVS on alsa-dev and compiled it fine. However when I run modprobe I get the following error:

there are a number problems with the hdsp driver at present. fixing them is mostly a matter of at least 1 of 3 people finding time to work on it. however, your initial problems are different:

Quoted 3 lines

Using /lib/modules/2.4.18-3/kernel/sound/pci/rme9652/snd-hdsp.o /lib/modules/2.4.18-3/kernel/sound/pci/rme9652/snd-hdsp.o: unresolved symbol snd_hammerfall_get_buffer_R5bab1fdf

you don't have a version of the ALSA drivers compiled in a way that will allow the kernel module system to work. you need to fix this first. someone else will have to comment on how to do that. you should probably specify which version of ALSA you are using since there are many changes to ALSA all the time. it appears to me that you may have a version of ALSA that doesn't build the rawmidi module that the hdsp requires to support it.

--p

-------------------------------------------------------
This SF.net email is sponsored by: Etnus, makers of TotalView, The best thread debugger on the planet. Designed with thread debugging features you've never dreamed of, try TotalView 6 free at www.etnus.com.

#2 lore raw
In reply to [email protected]

Hi Frank,
I'm an HDSP 9652 non-user for many of the same reasons. A couple of
comments below.
Mark

Quoted 10 lines

Hello,
I recently purchased a Hammerfall DSP system to use on Windows and
especially LINUX for use on Ardour. I have the multiface system. I must say I am confused on the support of the newest version of this pci card (I know that I have firmware version 11). I downloaded the current CVS on alsa-dev and compiled it fine. However when I run modprobe I get the following error:

Quoted 3 lines

/sbin/modprobe snd-hdsp
/lib/modules/2.4.18-3/kernel/sound/pci/rme9652/snd-hdsp.o:
init_module: No such device

[MWK] This is sometimes caused by a mismatch between between the firmware revision in your card/box and those firmware revisions that the driver knows about. Run lspci to see what your card has, and read through the driver code to see what the driver knows about.

NOTE TO DEVELOPERS - Can't you make this message "init_module: No such device" more descriptive, such as "init_module: Checked for devices with PCI Device ID's XXX, firmware revisions AA, BB, CC, DD & EE - No devices found"? Many people, including me, don't know how to read source code and can't give you as much direct information. Just a thought.

Quoted 10 lines

Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters /lib/modules/2.4.18-3/kernel/sound/pci/rme9652/snd-hdsp.o: insmod /lib/modules/2.4.18-3/kernel/sound/pci/rme9652/snd-hdsp.o failed /lib/modules/2.4.18-3/kernel/sound/pci/rme9652/snd-hdsp.o: insmod snd-hdsp failed

Then when I just offer the command insmod snd-hdsp I get the following:

Quoted 6 lines

/sbin/insmod snd-hdsp
Using /lib/modules/2.4.18-3/kernel/sound/pci/rme9652/snd-hdsp.o /lib/modules/2.4.18-3/kernel/sound/pci/rme9652/snd-hdsp.o: unresolved symbol snd_hammerfall_get_buffer_R5bab1fdf /lib/modules/2.4.18-3/kernel/sound/pci/rme9652/snd-hdsp.o: unresolved symbol snd_rawmidi_receive_R1e37534c

[MWK] I have seen these sorts of errors when:

1) The kernel source code that the driver was compiled against is not the same as the kernel that's running. For instanace, you have a standard distribution kernel and a custom kernel from kernel.org. If you are running the standard kernel, but the Alsa driver was compiled with /usr/src/linux pointing at the custom kernel, then problems ensue.

2) The C compiler used to compile Alsa does not match the compiler used to compile the kernel.

<SNIP>

Quoted 6 lines

When I run hdsploader it completes but says nothing like this:

hdsploader - firmware loader for RME Hammerfall DSP cards Looking for HDSP + Multiface or Digiface cards :

[MWK] Again, this strikes me that Alsa does not understand your firmware revision since it isn't even finding a card.

Good luck!!

-------------------------------------------------------
This SF.net email is sponsored by: Etnus, makers of TotalView, The best thread debugger on the planet. Designed with thread debugging features you've never dreamed of, try TotalView 6 free at www.etnus.com.