Skip to contentSkip to conversation

Yocto uses older PV instead of newest - how to figure out why?

DISCUSSION Oliver Westermann 3 participants 3 messages Aug 24, 2020

lore
Share & tools
lore
#0 lore raw

Hey,

we're porting our yocto from an older NXP iMX release to their newest BSP, upgrading yocto in the process from sumo to zeus. Using their current setup, the layers provide one recipe in two versions - 0.2 and 1.0. imx-boot to be precise.

I assumed yocto would use the newer version, but it uses 0.2 for some reason and I can't figure out why: I 'grep'ed' everything and could not find any reference to this package which has some version requirements. Are there any tips to figure out why yocto is not using the 1.0 recipe?

Best regards, Olli

#1 lore raw

Quoting Oliver Westermann <[email protected]>:

Quoted 7 lines

Hey,

we're porting our yocto from an older NXP iMX release to their newest BSP, upgrading yocto in the process from sumo to zeus. Using their current setup, the layers provide one recipe in two versions - 0.2 and 1.0. imx-boot to be precise.

I assumed yocto would use the newer version, but it uses 0.2 for some reason and I can't figure out why: I 'grep'ed' everything and could not find any reference to this package which has some version requirements. Are there any tips to figure out why yocto is not using the 1.0 recipe?

Could it have something to do with layer priorities? Use the
"bitbake-layers" utility to display where recipes are being pulled from.

rday

#2 lore raw
In reply to Oliver Westermann

Hi Oliver,

Quoted 7 lines · Oliver Westermann

Hey,

we're porting our yocto from an older NXP iMX release to their newest BSP, upgrading yocto in the process from sumo to zeus. Using their current setup, the layers provide one recipe in two versions - 0.2 and 1.0. imx-boot to be precise.

Quoted 5 lines

I assumed yocto would use the newer version, but it uses 0.2 for some reason and I can't figure out why: I 'grep'ed' everything and could not find any reference to this package which has some version requirements. Are there any tips to figure out why yocto is not using the 1.0 recipe?

Everything I wanted to say is in this stack overflow answer: https://stackoverflow.com/a/37180291

If what Robert just answered isn't helping, this will (worth a read at least 😉). If all have been checked but you still couldn't figure it out, at least we got the obvious out of the way 🙂

BR,
Quentin

Signature · 1 line
Sent from my Android device with K-9 Mail. Please excuse my brevity.