SiI3112: problemes with shared interrupt line?
Hi,
we got a machine with a Nforce2 chipset and a SiI3112 SATA controller. Two Maxtor disks are configured in software raid, level 1.
The machine is quite stable as long as I keep the raid degraded. If try to syncronize the array the machines dies within 20 minutes. No message given.
This has lead med to believe there is a problem with the two drives sharing interrupt line 11. I guess it is impossible to force ide2 and ide3 to use different interrupts as both devices are on the same chip.
I am running Linux 2.4.22-ac3.
Has anyone else seen this?
Quoted 1 line
From dmesg:
SiI3112 Serial ATA: IDE controller at PCI slot 01:0b.0 SiI3112 Serial ATA: chipset revision 2
SiI3112 Serial ATA: not 100% native mode: will probe irqs later
ide2: MMIO-DMA , BIOS settings: hde:pio, hdf:pio
ide3: MMIO-DMA , BIOS settings: hdg:pio, hdh:pio
hda: ASUS CD-S400, ATAPI CD/DVD-ROM drive
hde: Maxtor 6Y080M0, ATA DISK drive
blk: queue c046a7c8, I/O limit 4095Mb (mask 0xffffffff)
hdg: Maxtor 6Y080M0, ATA DISK drive
blk: queue c046ac3c, I/O limit 4095Mb (mask 0xffffffff) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide2 at 0xf885e080-0xf885e087,0xf885e08a on irq 11
ide3 at 0xf885e0c0-0xf885e0c7,0xf885e0ca on irq 11
hde: attached ide-disk driver.
hde: host protected area => 1
hde: 160086528 sectors (81964 MB) w/7936KiB Cache, CHS=158816/16/63
hdg: attached ide-disk driver.
hdg: host protected area => 1
hdg: 160086528 sectors (81964 MB) w/7936KiB Cache, CHS=158816/16/63
Signature · 1 line
Per Andreas Buer
Quoted 6 lines · Per Andreas Buer
we got a machine with a Nforce2 chipset and a SiI3112 SATA controller. Two Maxtor disks are configured in software raid, level 1.
The machine is quite stable as long as I keep the raid degraded. If try to syncronize the array the machines dies within 20 minutes. No message given.
Just about every bug report I have about SI3112 now is on Nforce chipsets. At the moment however I don't know what the magic connection is.
Quoted 3 lines · Alan Cox
Just about every bug report I have about SI3112 now is on Nforce chipsets. At the moment however I don't know what the magic connection is.
I don't know if this comes under the heading of "SiI3112 bugs", but
Adaptec AAR-1210SA still doesn't work for me (and I've seen one other identical report on LKML in the last fortnight).
Any attempt to access the drive (Seagate Barracuda V) causes this
to happen:
Sep 22 20:56:00 src@vlad kernel: hda: dma_timer_expiry: dma status == 0x24 Sep 22 20:56:10 src@vlad kernel: hda: DMA interrupt recovery Sep 22 20:56:10 src@vlad kernel: hda: lost interrupt
Data does eventually get to/from the drive, but so slowly as to be
unusable.
Hugo.
Signature · 4 lines
=== Hugo Mills: hugo@... carfax.org.uk | darksatanic.net | lug.org.uk ===
PGP key: 1C335860 from wwwkeys.eu.pgp.net or http://www.carfax.org.uk
--- In event of Last Trump, please form an orderly queue ---
and await judgement.