Skip to contentSkip to conversation

PM: Introduce EXPORT_NS_GPL_DEV_PM_OPS() and use cases in IIO.

PATCH In review Jonathan Cameron 6 participants 14 messages Aug 7, 2022 – Aug 22, 2022

Subsystems (7)
lore
Share & tools
lore

Jonathan Cameron

author maintainer
#0 lore raw

cover PM: Introduce EXPORT_NS_GPL_DEV_PM_OPS() and use cases in IIO.

From: Jonathan Cameron <[email protected]>

Perhaps the most complex case we can have is a core driver module (usually with accompanying per bus modules) that exports, in a namespace, a struct dev_pm_ops. The driver has different handling for runtime and sleep suspend / resume so (almost) all callbacks are provided. The pm.h helper macro _EXPORT_DEV_PM_OPS() could be used here but the handling of the last two parameters is unusual and very different from the macros intended for driver usage. First parameter needs to be "_gpl" and second needs to be the namespace specified as a string. Other NS macros take it without quotes.

As such, this series proposes introducing a suitable macro and then provides a number of IIO driver conversions. Where relevant the exports from the driver are moved into the new namespace.

If accepted we can either take the whole lot through the PM tree and hope there is nothing much else overlapping with this driver code in this cycle, or ideally we could use an immutable branch and pull this into both the IIO and PM trees.

Jonathan Cameron (5):
PM: core: Add EXPORT_NS_GPL_DEV_PM_OPS to avoid drivers rolling own.
iio: accel: fxls8962af: Use new EXPORT_NS_GPL_DEV_PM_OPS()
iio: gyro: fxas210002c: Move exports to IIO_FXAS210002C namespace.
iio: imu: inv_icm42600: Move exports to IIO_ICM42600 namespace
iio: imu: inv_mpu: Move exports to IIO_MPU6050 namespace

 drivers/iio/accel/fxls8962af-core.c           | 17 +++++++--------
 drivers/iio/accel/fxls8962af-i2c.c            |  2 +-
 drivers/iio/accel/fxls8962af-spi.c            |  2 +-
 drivers/iio/gyro/fxas21002c_core.c            | 21 ++++++++-----------
 drivers/iio/gyro/fxas21002c_i2c.c             |  3 ++-
 drivers/iio/gyro/fxas21002c_spi.c             |  3 ++-
 .../iio/imu/inv_icm42600/inv_icm42600_core.c  | 21 ++++++++-----------
 .../iio/imu/inv_icm42600/inv_icm42600_i2c.c   |  3 ++-
 .../iio/imu/inv_icm42600/inv_icm42600_spi.c   |  3 ++-
 drivers/iio/imu/inv_mpu6050/inv_mpu_core.c    | 18 +++++++---------
 drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c     |  3 ++-
 drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c     |  3 ++-
 include/linux/pm.h                            |  5 +++++
 13 files changed, 52 insertions(+), 52 deletions(-)
Signature · 1 line
2.37.1
author maintainer
#1 lore raw

PATCH 1/5 PM: core: Add EXPORT_NS_GPL_DEV_PM_OPS to avoid drivers rolling own.

From: Jonathan Cameron <[email protected]>

A driver wishing to export a struct dev_pm_ops with both suspend and runtime ops provided could use _EXPORT_DEV_PM_OPS() directly but that macro is not intended for use in drivers and requires non intuitive aspect such as passing "_gpl" as one parameter and the namespace as a string. As such just provide a macro to cover the GPL and NS case in a fashion that is in line with similar macros.

Cc Paul Cercueil <[email protected]>
Cc Rafael J. Wysocki <[email protected]>
---
 include/linux/pm.h | 5 +++++
 1 file changed, 5 insertions(+)
include/linux/pm.h +5 -0
index 871c9c49ec9d..18856e0d23ac 100644
@@ -407,6 +407,11 @@ static __maybe_unused _DEFINE_DEV_PM_OPS(__static_##name, suspend_fn, \
 #define EXPORT_NS_GPL_SIMPLE_DEV_PM_OPS(name, suspend_fn, resume_fn, ns)	\
 	_EXPORT_DEV_PM_OPS(name, suspend_fn, resume_fn, NULL, NULL, NULL, "_gpl", #ns)
 
+#define EXPORT_NS_GPL_DEV_PM_OPS(name, suspend_fn, resume_fn, runtime_suspend_fn, \
+			   runtime_resume_fn, idle_fn, ns) \
+	_EXPORT_DEV_PM_OPS(name, suspend_fn, resume_fn, runtime_suspend_fn, \
+			   runtime_resume_fn, idle_fn, "_gpl", #ns)
+
 /* Deprecated. Use DEFINE_SIMPLE_DEV_PM_OPS() instead. */
 #define SIMPLE_DEV_PM_OPS(name, suspend_fn, resume_fn) \
 const struct dev_pm_ops __maybe_unused name = { \
Signature · 1 line
2.37.1
#2 lore raw

Re: [PATCH 1/5] PM: core: Add EXPORT_NS_GPL_DEV_PM_OPS to avoid drivers rolling own.

Hi Jonathan,

If you can wait a day or two - I would like to submit my own version of EXPORT_NS_GPL_DEV_PM_OPS, which should be more versatile than your version.

Cheers,
-Paul

Quoted 40 lines · Jonathan Cameron

From: Jonathan Cameron <[email protected]>

A driver wishing to export a struct dev_pm_ops with both suspend and runtime ops provided could use _EXPORT_DEV_PM_OPS() directly but that macro is not intended for use in drivers and requires non intuitive aspect such as passing "_gpl" as one parameter and the namespace as a string. As such just provide a macro to cover the GPL and NS case in a fashion that is in line with similar macros.

Cc Paul Cercueil <[email protected]>
Cc Rafael J. Wysocki <[email protected]>
---
 include/linux/pm.h | 5 +++++
 1 file changed, 5 insertions(+)
include/linux/pm.h +1 -0
index 871c9c49ec9d..18856e0d23ac 100644
@@ -407,6 +407,11 @@ static __maybe_unused 
 _DEFINE_DEV_PM_OPS(__static_##name, suspend_fn, \
 #define EXPORT_NS_GPL_SIMPLE_DEV_PM_OPS(name, suspend_fn, resume_fn, 
 ns)	\
 	_EXPORT_DEV_PM_OPS(name, suspend_fn, resume_fn, NULL, NULL, NULL, 
 "_gpl", #ns)
 
+#define EXPORT_NS_GPL_DEV_PM_OPS(name, suspend_fn, resume_fn, 

runtime_suspend_fn, \

include/linux/pm.h +2 -0
+			   runtime_resume_fn, idle_fn, ns) \
+	_EXPORT_DEV_PM_OPS(name, suspend_fn, resume_fn, runtime_suspend_fn, 

\

include/linux/pm.h +2 -1
+			   runtime_resume_fn, idle_fn, "_gpl", #ns)
+
 /* Deprecated. Use DEFINE_SIMPLE_DEV_PM_OPS() instead. */
 #define SIMPLE_DEV_PM_OPS(name, suspend_fn, resume_fn) \
 const struct dev_pm_ops __maybe_unused name = { \
--

2.37.1

author maintainer
#3 lore raw

Re: [PATCH 1/5] PM: core: Add EXPORT_NS_GPL_DEV_PM_OPS to avoid drivers rolling own.

Quoted 5 lines · On Mon, 08 Aug 2022 13:22:37 +0200 Paul Cercueil <[email protected]> wrote:

Hi Jonathan,

If you can wait a day or two - I would like to submit my own version of EXPORT_NS_GPL_DEV_PM_OPS, which should be more versatile than your version.

Thanks. Yours approach is indeed preferable, I'll respin this on top of your patch.

Its a bit enough change I'll probably not take any of the existing tags forwards to v2.

Jonathan

Quoted 49 lines

Cheers,
-Paul

Le dim., ao_t 7 2022 at 20:20:34 +0100, Jonathan Cameron <[email protected]> a _crit :

Quoted 40 lines

From: Jonathan Cameron <[email protected]>

A driver wishing to export a struct dev_pm_ops with both suspend and runtime ops provided could use _EXPORT_DEV_PM_OPS() directly but that macro is not intended for use in drivers and requires non intuitive aspect such as passing "_gpl" as one parameter and the namespace as a string. As such just provide a macro to cover the GPL and NS case in a fashion that is in line with similar macros.

Cc Paul Cercueil <[email protected]>
Cc Rafael J. Wysocki <[email protected]>
---
 include/linux/pm.h | 5 +++++
 1 file changed, 5 insertions(+)
include/linux/pm.h +1 -0
index 871c9c49ec9d..18856e0d23ac 100644
@@ -407,6 +407,11 @@ static __maybe_unused 
 _DEFINE_DEV_PM_OPS(__static_##name, suspend_fn, \
 #define EXPORT_NS_GPL_SIMPLE_DEV_PM_OPS(name, suspend_fn, resume_fn, 
 ns)	\
 	_EXPORT_DEV_PM_OPS(name, suspend_fn, resume_fn, NULL, NULL, NULL, 
 "_gpl", #ns)
 
+#define EXPORT_NS_GPL_DEV_PM_OPS(name, suspend_fn, resume_fn, 

runtime_suspend_fn, \

include/linux/pm.h +2 -0
+			   runtime_resume_fn, idle_fn, ns) \
+	_EXPORT_DEV_PM_OPS(name, suspend_fn, resume_fn, runtime_suspend_fn, 

\

include/linux/pm.h +2 -1
+			   runtime_resume_fn, idle_fn, "_gpl", #ns)
+
 /* Deprecated. Use DEFINE_SIMPLE_DEV_PM_OPS() instead. */
 #define SIMPLE_DEV_PM_OPS(name, suspend_fn, resume_fn) \
 const struct dev_pm_ops __maybe_unused name = { \
--

2.37.1

author maintainer
#4 lore raw

PATCH 2/5 iio: accel: fxls8962af: Use new EXPORT_NS_GPL_DEV_PM_OPS()

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

Using this macro allows the compiler to remove unused structures and callbacks if we are not building with CONFIG_PM* without needing __maybe_unused markings.

---
 drivers/iio/accel/fxls8962af-core.c | 17 +++++++----------
 drivers/iio/accel/fxls8962af-i2c.c  |  2 +-
 drivers/iio/accel/fxls8962af-spi.c  |  2 +-
 3 files changed, 9 insertions(+), 12 deletions(-)
drivers/iio/accel/fxls8962af-core.c +7 -10
index 8874d6d61725..6c7dde4a1af9 100644
@@ -1241,7 +1241,7 @@ int fxls8962af_core_probe(struct device *dev, struct regmap *regmap, int irq)
 }
 EXPORT_SYMBOL_NS_GPL(fxls8962af_core_probe, IIO_FXLS8962AF);
 
-static int __maybe_unused fxls8962af_runtime_suspend(struct device *dev)
+static int fxls8962af_runtime_suspend(struct device *dev)
 {
 	struct fxls8962af_data *data = iio_priv(dev_get_drvdata(dev));
 	int ret;
@@ -1255,14 +1255,14 @@ static int __maybe_unused fxls8962af_runtime_suspend(struct device *dev)
 	return 0;
 }
 
-static int __maybe_unused fxls8962af_runtime_resume(struct device *dev)
+static int fxls8962af_runtime_resume(struct device *dev)
 {
 	struct fxls8962af_data *data = iio_priv(dev_get_drvdata(dev));
 
 	return fxls8962af_active(data);
 }
 
-static int __maybe_unused fxls8962af_suspend(struct device *dev)
+static int fxls8962af_suspend(struct device *dev)
 {
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct fxls8962af_data *data = iio_priv(indio_dev);
@@ -1283,7 +1283,7 @@ static int __maybe_unused fxls8962af_suspend(struct device *dev)
 	return 0;
 }
 
-static int __maybe_unused fxls8962af_resume(struct device *dev)
+static int fxls8962af_resume(struct device *dev)
 {
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct fxls8962af_data *data = iio_priv(indio_dev);
@@ -1300,12 +1300,9 @@ static int __maybe_unused fxls8962af_resume(struct device *dev)
 	return 0;
 }
 
-const struct dev_pm_ops fxls8962af_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(fxls8962af_suspend, fxls8962af_resume)
-	SET_RUNTIME_PM_OPS(fxls8962af_runtime_suspend,
-			   fxls8962af_runtime_resume, NULL)
-};
-EXPORT_SYMBOL_NS_GPL(fxls8962af_pm_ops, IIO_FXLS8962AF);
+EXPORT_NS_GPL_DEV_PM_OPS(fxls8962af_pm_ops, fxls8962af_suspend, fxls8962af_resume,
+			 fxls8962af_runtime_suspend, fxls8962af_runtime_resume, NULL,
+			 IIO_FXLS8962AF);
 
 MODULE_AUTHOR("Sean Nyekjaer <[email protected]>");
 MODULE_DESCRIPTION("NXP FXLS8962AF/FXLS8964AF accelerometer driver");
drivers/iio/accel/fxls8962af-i2c.c +1 -1
index 8fbadfea1620..22640eaebac7 100644
@@ -45,7 +45,7 @@ static struct i2c_driver fxls8962af_driver = {
 	.driver = {
 		   .name = "fxls8962af_i2c",
 		   .of_match_table = fxls8962af_of_match,
-		   .pm = &fxls8962af_pm_ops,
+		   .pm = pm_ptr(&fxls8962af_pm_ops),
 		   },
 	.probe_new = fxls8962af_probe,
 	.id_table = fxls8962af_id,
drivers/iio/accel/fxls8962af-spi.c +1 -1
index 885b3ab7fcb5..a0d192211839 100644
@@ -44,7 +44,7 @@ MODULE_DEVICE_TABLE(spi, fxls8962af_spi_id_table);
 static struct spi_driver fxls8962af_driver = {
 	.driver = {
 		   .name = "fxls8962af_spi",
-		   .pm = &fxls8962af_pm_ops,
+		   .pm = pm_ptr(&fxls8962af_pm_ops),
 		   .of_match_table = fxls8962af_spi_of_match,
 		   },
 	.probe = fxls8962af_probe,
Signature · 1 line
2.37.1
Acked-by on v1 2/5
#5 lore raw

Re: [PATCH 2/5] iio: accel: fxls8962af: Use new EXPORT_NS_GPL_DEV_PM_OPS()

Quoted 8 lines · Jonathan Cameron

From: Jonathan Cameron <[email protected]>

Using this macro allows the compiler to remove unused structures and callbacks if we are not building with CONFIG_PM* without needing __maybe_unused markings.

/Sean

Quoted 90 lines
---
 drivers/iio/accel/fxls8962af-core.c | 17 +++++++----------
 drivers/iio/accel/fxls8962af-i2c.c  |  2 +-
 drivers/iio/accel/fxls8962af-spi.c  |  2 +-
 3 files changed, 9 insertions(+), 12 deletions(-)
drivers/iio/accel/fxls8962af-core.c +7 -10
index 8874d6d61725..6c7dde4a1af9 100644
@@ -1241,7 +1241,7 @@ int fxls8962af_core_probe(struct device *dev, struct regmap *regmap, int irq)
 }
 EXPORT_SYMBOL_NS_GPL(fxls8962af_core_probe, IIO_FXLS8962AF);
 
-static int __maybe_unused fxls8962af_runtime_suspend(struct device *dev)
+static int fxls8962af_runtime_suspend(struct device *dev)
 {
 	struct fxls8962af_data *data = iio_priv(dev_get_drvdata(dev));
 	int ret;
@@ -1255,14 +1255,14 @@ static int __maybe_unused fxls8962af_runtime_suspend(struct device *dev)
 	return 0;
 }
 
-static int __maybe_unused fxls8962af_runtime_resume(struct device *dev)
+static int fxls8962af_runtime_resume(struct device *dev)
 {
 	struct fxls8962af_data *data = iio_priv(dev_get_drvdata(dev));
 
 	return fxls8962af_active(data);
 }
 
-static int __maybe_unused fxls8962af_suspend(struct device *dev)
+static int fxls8962af_suspend(struct device *dev)
 {
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct fxls8962af_data *data = iio_priv(indio_dev);
@@ -1283,7 +1283,7 @@ static int __maybe_unused fxls8962af_suspend(struct device *dev)
 	return 0;
 }
 
-static int __maybe_unused fxls8962af_resume(struct device *dev)
+static int fxls8962af_resume(struct device *dev)
 {
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct fxls8962af_data *data = iio_priv(indio_dev);
@@ -1300,12 +1300,9 @@ static int __maybe_unused fxls8962af_resume(struct device *dev)
 	return 0;
 }
 
-const struct dev_pm_ops fxls8962af_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(fxls8962af_suspend, fxls8962af_resume)
-	SET_RUNTIME_PM_OPS(fxls8962af_runtime_suspend,
-			   fxls8962af_runtime_resume, NULL)
-};
-EXPORT_SYMBOL_NS_GPL(fxls8962af_pm_ops, IIO_FXLS8962AF);
+EXPORT_NS_GPL_DEV_PM_OPS(fxls8962af_pm_ops, fxls8962af_suspend, fxls8962af_resume,
+			 fxls8962af_runtime_suspend, fxls8962af_runtime_resume, NULL,
+			 IIO_FXLS8962AF);
 
 MODULE_AUTHOR("Sean Nyekjaer <[email protected]>");
 MODULE_DESCRIPTION("NXP FXLS8962AF/FXLS8964AF accelerometer driver");
drivers/iio/accel/fxls8962af-i2c.c +1 -1
index 8fbadfea1620..22640eaebac7 100644
@@ -45,7 +45,7 @@ static struct i2c_driver fxls8962af_driver = {
 	.driver = {
 		   .name = "fxls8962af_i2c",
 		   .of_match_table = fxls8962af_of_match,
-		   .pm = &fxls8962af_pm_ops,
+		   .pm = pm_ptr(&fxls8962af_pm_ops),
 		   },
 	.probe_new = fxls8962af_probe,
 	.id_table = fxls8962af_id,
drivers/iio/accel/fxls8962af-spi.c +1 -1
index 885b3ab7fcb5..a0d192211839 100644
@@ -44,7 +44,7 @@ MODULE_DEVICE_TABLE(spi, fxls8962af_spi_id_table);
 static struct spi_driver fxls8962af_driver = {
 	.driver = {
 		   .name = "fxls8962af_spi",
-		   .pm = &fxls8962af_pm_ops,
+		   .pm = pm_ptr(&fxls8962af_pm_ops),
 		   .of_match_table = fxls8962af_spi_of_match,
 		   },
 	.probe = fxls8962af_probe,
Signature · 1 line
2.37.1
author maintainer
#6 lore raw

PATCH 3/5 iio: gyro: fxas210002c: Move exports to IIO_FXAS210002C namespace.

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

Includes using EXPORT_NS_GPL_DEV_PM_OPS() and the simplifications that brings by allowing the compiler to remove unused struct dev_pm_ops and callbacks without needing explicit __maybe_unused markings.

---
 drivers/iio/gyro/fxas21002c_core.c | 21 +++++++++------------
 drivers/iio/gyro/fxas21002c_i2c.c  |  3 ++-
 drivers/iio/gyro/fxas21002c_spi.c  |  3 ++-
 3 files changed, 13 insertions(+), 14 deletions(-)
drivers/iio/gyro/fxas21002c_core.c +9 -12
index a36d71d9e3ea..9aee9096363f 100644
@@ -998,7 +998,7 @@ int fxas21002c_core_probe(struct device *dev, struct regmap *regmap, int irq,
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(fxas21002c_core_probe);
+EXPORT_SYMBOL_NS_GPL(fxas21002c_core_probe, IIO_FXAS21002C);
 
 void fxas21002c_core_remove(struct device *dev)
 {
@@ -1009,9 +1009,9 @@ void fxas21002c_core_remove(struct device *dev)
 	pm_runtime_disable(dev);
 	pm_runtime_set_suspended(dev);
 }
-EXPORT_SYMBOL_GPL(fxas21002c_core_remove);
+EXPORT_SYMBOL_NS_GPL(fxas21002c_core_remove, IIO_FXAS21002C);
 
-static int __maybe_unused fxas21002c_suspend(struct device *dev)
+static int fxas21002c_suspend(struct device *dev)
 {
 	struct fxas21002c_data *data = iio_priv(dev_get_drvdata(dev));
 
@@ -1021,7 +1021,7 @@ static int __maybe_unused fxas21002c_suspend(struct device *dev)
 	return 0;
 }
 
-static int __maybe_unused fxas21002c_resume(struct device *dev)
+static int fxas21002c_resume(struct device *dev)
 {
 	struct fxas21002c_data *data = iio_priv(dev_get_drvdata(dev));
 	int ret;
@@ -1033,26 +1033,23 @@ static int __maybe_unused fxas21002c_resume(struct device *dev)
 	return fxas21002c_mode_set(data, data->prev_mode);
 }
 
-static int __maybe_unused fxas21002c_runtime_suspend(struct device *dev)
+static int fxas21002c_runtime_suspend(struct device *dev)
 {
 	struct fxas21002c_data *data = iio_priv(dev_get_drvdata(dev));
 
 	return fxas21002c_mode_set(data, FXAS21002C_MODE_READY);
 }
 
-static int __maybe_unused fxas21002c_runtime_resume(struct device *dev)
+static int fxas21002c_runtime_resume(struct device *dev)
 {
 	struct fxas21002c_data *data = iio_priv(dev_get_drvdata(dev));
 
 	return fxas21002c_mode_set(data, FXAS21002C_MODE_ACTIVE);
 }
 
-const struct dev_pm_ops fxas21002c_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(fxas21002c_suspend, fxas21002c_resume)
-	SET_RUNTIME_PM_OPS(fxas21002c_runtime_suspend,
-			   fxas21002c_runtime_resume, NULL)
-};
-EXPORT_SYMBOL_GPL(fxas21002c_pm_ops);
+EXPORT_NS_GPL_DEV_PM_OPS(fxas21002c_pm_ops, fxas21002c_suspend,
+			 fxas21002c_resume, fxas21002c_runtime_suspend,
+			 fxas21002c_runtime_resume, NULL, IIO_FXAS21002C);
 
 MODULE_AUTHOR("Rui Miguel Silva <[email protected]>");
 MODULE_LICENSE("GPL v2");
drivers/iio/gyro/fxas21002c_i2c.c +2 -1
index a7807fd97483..241401a9dfea 100644
@@ -55,7 +55,7 @@ MODULE_DEVICE_TABLE(of, fxas21002c_i2c_of_match);
 static struct i2c_driver fxas21002c_i2c_driver = {
 	.driver = {
 		.name = "fxas21002c_i2c",
-		.pm = &fxas21002c_pm_ops,
+		.pm = pm_ptr(&fxas21002c_pm_ops),
 		.of_match_table = fxas21002c_i2c_of_match,
 	},
 	.probe_new	= fxas21002c_i2c_probe,
@@ -67,3 +67,4 @@ module_i2c_driver(fxas21002c_i2c_driver);
 MODULE_AUTHOR("Rui Miguel Silva <[email protected]>");
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("FXAS21002C I2C Gyro driver");
+MODULE_IMPORT_NS(IIO_FXAS21002C);
drivers/iio/gyro/fxas21002c_spi.c +2 -1
index c3ac169facf9..4f633826547c 100644
@@ -54,7 +54,7 @@ MODULE_DEVICE_TABLE(of, fxas21002c_spi_of_match);
 static struct spi_driver fxas21002c_spi_driver = {
 	.driver = {
 		.name = "fxas21002c_spi",
-		.pm = &fxas21002c_pm_ops,
+		.pm = pm_ptr(&fxas21002c_pm_ops),
 		.of_match_table = fxas21002c_spi_of_match,
 	},
 	.probe		= fxas21002c_spi_probe,
@@ -66,3 +66,4 @@ module_spi_driver(fxas21002c_spi_driver);
 MODULE_AUTHOR("Rui Miguel Silva <[email protected]>");
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("FXAS21002C SPI Gyro driver");
+MODULE_IMPORT_NS(IIO_FXAS21002C);
Signature · 1 line
2.37.1
Acked-by on v1 3/5
#7 lore raw

Re: [PATCH 3/5] iio: gyro: fxas210002c: Move exports to IIO_FXAS210002C namespace.

Hey Jonathan,

Quoted 8 lines · Jonathan Cameron

From: Jonathan Cameron <[email protected]>

Includes using EXPORT_NS_GPL_DEV_PM_OPS() and the simplifications that brings by allowing the compiler to remove unused struct dev_pm_ops and callbacks without needing explicit __maybe_unused markings.

This looks a sane and good improvement, thanks.

Cheers,
Rui

Quoted 111 lines
---
 drivers/iio/gyro/fxas21002c_core.c | 21 +++++++++------------
 drivers/iio/gyro/fxas21002c_i2c.c  |  3 ++-
 drivers/iio/gyro/fxas21002c_spi.c  |  3 ++-
 3 files changed, 13 insertions(+), 14 deletions(-)
drivers/iio/gyro/fxas21002c_core.c +9 -12
index a36d71d9e3ea..9aee9096363f 100644
@@ -998,7 +998,7 @@ int fxas21002c_core_probe(struct device *dev, struct regmap *regmap, int irq,
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(fxas21002c_core_probe);
+EXPORT_SYMBOL_NS_GPL(fxas21002c_core_probe, IIO_FXAS21002C);
 
 void fxas21002c_core_remove(struct device *dev)
 {
@@ -1009,9 +1009,9 @@ void fxas21002c_core_remove(struct device *dev)
 	pm_runtime_disable(dev);
 	pm_runtime_set_suspended(dev);
 }
-EXPORT_SYMBOL_GPL(fxas21002c_core_remove);
+EXPORT_SYMBOL_NS_GPL(fxas21002c_core_remove, IIO_FXAS21002C);
 
-static int __maybe_unused fxas21002c_suspend(struct device *dev)
+static int fxas21002c_suspend(struct device *dev)
 {
 	struct fxas21002c_data *data = iio_priv(dev_get_drvdata(dev));
 
@@ -1021,7 +1021,7 @@ static int __maybe_unused fxas21002c_suspend(struct device *dev)
 	return 0;
 }
 
-static int __maybe_unused fxas21002c_resume(struct device *dev)
+static int fxas21002c_resume(struct device *dev)
 {
 	struct fxas21002c_data *data = iio_priv(dev_get_drvdata(dev));
 	int ret;
@@ -1033,26 +1033,23 @@ static int __maybe_unused fxas21002c_resume(struct device *dev)
 	return fxas21002c_mode_set(data, data->prev_mode);
 }
 
-static int __maybe_unused fxas21002c_runtime_suspend(struct device *dev)
+static int fxas21002c_runtime_suspend(struct device *dev)
 {
 	struct fxas21002c_data *data = iio_priv(dev_get_drvdata(dev));
 
 	return fxas21002c_mode_set(data, FXAS21002C_MODE_READY);
 }
 
-static int __maybe_unused fxas21002c_runtime_resume(struct device *dev)
+static int fxas21002c_runtime_resume(struct device *dev)
 {
 	struct fxas21002c_data *data = iio_priv(dev_get_drvdata(dev));
 
 	return fxas21002c_mode_set(data, FXAS21002C_MODE_ACTIVE);
 }
 
-const struct dev_pm_ops fxas21002c_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(fxas21002c_suspend, fxas21002c_resume)
-	SET_RUNTIME_PM_OPS(fxas21002c_runtime_suspend,
-			   fxas21002c_runtime_resume, NULL)
-};
-EXPORT_SYMBOL_GPL(fxas21002c_pm_ops);
+EXPORT_NS_GPL_DEV_PM_OPS(fxas21002c_pm_ops, fxas21002c_suspend,
+			 fxas21002c_resume, fxas21002c_runtime_suspend,
+			 fxas21002c_runtime_resume, NULL, IIO_FXAS21002C);
 
 MODULE_AUTHOR("Rui Miguel Silva <[email protected]>");
 MODULE_LICENSE("GPL v2");
drivers/iio/gyro/fxas21002c_i2c.c +2 -1
index a7807fd97483..241401a9dfea 100644
@@ -55,7 +55,7 @@ MODULE_DEVICE_TABLE(of, fxas21002c_i2c_of_match);
 static struct i2c_driver fxas21002c_i2c_driver = {
 	.driver = {
 		.name = "fxas21002c_i2c",
-		.pm = &fxas21002c_pm_ops,
+		.pm = pm_ptr(&fxas21002c_pm_ops),
 		.of_match_table = fxas21002c_i2c_of_match,
 	},
 	.probe_new	= fxas21002c_i2c_probe,
@@ -67,3 +67,4 @@ module_i2c_driver(fxas21002c_i2c_driver);
 MODULE_AUTHOR("Rui Miguel Silva <[email protected]>");
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("FXAS21002C I2C Gyro driver");
+MODULE_IMPORT_NS(IIO_FXAS21002C);
drivers/iio/gyro/fxas21002c_spi.c +2 -1
index c3ac169facf9..4f633826547c 100644
@@ -54,7 +54,7 @@ MODULE_DEVICE_TABLE(of, fxas21002c_spi_of_match);
 static struct spi_driver fxas21002c_spi_driver = {
 	.driver = {
 		.name = "fxas21002c_spi",
-		.pm = &fxas21002c_pm_ops,
+		.pm = pm_ptr(&fxas21002c_pm_ops),
 		.of_match_table = fxas21002c_spi_of_match,
 	},
 	.probe		= fxas21002c_spi_probe,
@@ -66,3 +66,4 @@ module_spi_driver(fxas21002c_spi_driver);
 MODULE_AUTHOR("Rui Miguel Silva <[email protected]>");
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("FXAS21002C SPI Gyro driver");
+MODULE_IMPORT_NS(IIO_FXAS21002C);
Signature · 1 line
2.37.1
author maintainer
#8 lore raw

PATCH 4/5 iio: imu: inv_icm42600: Move exports to IIO_ICM42600 namespace

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

As these exports are only relevant to core module and users in the bus specific modules, move them out of the main kernel namespace.

Includes using EXPORT_NS_GPL_DEV_PM_OPS() and the simplifications that brings by allowing the compiler to remove unused struct dev_pm_ops and callbacks without needing explicit __maybe_unused markings.

Cc Jean-Baptiste Maneyrol <[email protected]>
---
 .../iio/imu/inv_icm42600/inv_icm42600_core.c  | 21 ++++++++-----------
 .../iio/imu/inv_icm42600/inv_icm42600_i2c.c   |  3 ++-
 .../iio/imu/inv_icm42600/inv_icm42600_spi.c   |  3 ++-
 3 files changed, 13 insertions(+), 14 deletions(-)
drivers/iio/imu/inv_icm42600/inv_icm42600_core.c +9 -12
index ca85fccc9839..2dce708e6272 100644
@@ -41,7 +41,7 @@ const struct regmap_config inv_icm42600_regmap_config = {
 	.ranges = inv_icm42600_regmap_ranges,
 	.num_ranges = ARRAY_SIZE(inv_icm42600_regmap_ranges),
 };
-EXPORT_SYMBOL_GPL(inv_icm42600_regmap_config);
+EXPORT_SYMBOL_NS_GPL(inv_icm42600_regmap_config, IIO_ICM42600);
 
 struct inv_icm42600_hw {
 	uint8_t whoami;
@@ -660,13 +660,13 @@ int inv_icm42600_core_probe(struct regmap *regmap, int chip, int irq,
 
 	return devm_add_action_or_reset(dev, inv_icm42600_disable_pm, dev);
 }
-EXPORT_SYMBOL_GPL(inv_icm42600_core_probe);
+EXPORT_SYMBOL_NS_GPL(inv_icm42600_core_probe, IIO_ICM42600);
 
 /*
  * Suspend saves sensors state and turns everything off.
  * Check first if runtime suspend has not already done the job.
  */
-static int __maybe_unused inv_icm42600_suspend(struct device *dev)
+static int inv_icm42600_suspend(struct device *dev)
 {
 	struct inv_icm42600_state *st = dev_get_drvdata(dev);
 	int ret;
@@ -706,7 +706,7 @@ static int __maybe_unused inv_icm42600_suspend(struct device *dev)
  * System resume gets the system back on and restores the sensors state.
  * Manually put runtime power management in system active state.
  */
-static int __maybe_unused inv_icm42600_resume(struct device *dev)
+static int inv_icm42600_resume(struct device *dev)
 {
 	struct inv_icm42600_state *st = dev_get_drvdata(dev);
 	int ret;
@@ -739,7 +739,7 @@ static int __maybe_unused inv_icm42600_resume(struct device *dev)
 }
 
 /* Runtime suspend will turn off sensors that are enabled by iio devices. */
-static int __maybe_unused inv_icm42600_runtime_suspend(struct device *dev)
+static int inv_icm42600_runtime_suspend(struct device *dev)
 {
 	struct inv_icm42600_state *st = dev_get_drvdata(dev);
 	int ret;
@@ -761,7 +761,7 @@ static int __maybe_unused inv_icm42600_runtime_suspend(struct device *dev)
 }
 
 /* Sensors are enabled by iio devices, no need to turn them back on here. */
-static int __maybe_unused inv_icm42600_runtime_resume(struct device *dev)
+static int inv_icm42600_runtime_resume(struct device *dev)
 {
 	struct inv_icm42600_state *st = dev_get_drvdata(dev);
 	int ret;
@@ -774,12 +774,9 @@ static int __maybe_unused inv_icm42600_runtime_resume(struct device *dev)
 	return ret;
 }
 
-const struct dev_pm_ops inv_icm42600_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(inv_icm42600_suspend, inv_icm42600_resume)
-	SET_RUNTIME_PM_OPS(inv_icm42600_runtime_suspend,
-			   inv_icm42600_runtime_resume, NULL)
-};
-EXPORT_SYMBOL_GPL(inv_icm42600_pm_ops);
+EXPORT_NS_GPL_DEV_PM_OPS(inv_icm42600_pm_ops, inv_icm42600_suspend,
+			 inv_icm42600_resume, inv_icm42600_runtime_suspend,
+			 inv_icm42600_runtime_resume, NULL, IIO_ICM42600);
 
 MODULE_AUTHOR("InvenSense, Inc.");
 MODULE_DESCRIPTION("InvenSense ICM-426xx device driver");
drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c +2 -1
index d4a692b838d0..4f96989ddf4a 100644
@@ -93,7 +93,7 @@ static struct i2c_driver inv_icm42600_driver = {
 	.driver = {
 		.name = "inv-icm42600-i2c",
 		.of_match_table = inv_icm42600_of_matches,
-		.pm = &inv_icm42600_pm_ops,
+		.pm = pm_ptr(&inv_icm42600_pm_ops),
 	},
 	.probe_new = inv_icm42600_probe,
 };
@@ -102,3 +102,4 @@ module_i2c_driver(inv_icm42600_driver);
 MODULE_AUTHOR("InvenSense, Inc.");
 MODULE_DESCRIPTION("InvenSense ICM-426xx I2C driver");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(IIO_ICM42600);
drivers/iio/imu/inv_icm42600/inv_icm42600_spi.c +2 -1
index e6305e5fa975..486b46e53113 100644
@@ -89,7 +89,7 @@ static struct spi_driver inv_icm42600_driver = {
 	.driver = {
 		.name = "inv-icm42600-spi",
 		.of_match_table = inv_icm42600_of_matches,
-		.pm = &inv_icm42600_pm_ops,
+		.pm = pm_ptr(&inv_icm42600_pm_ops),
 	},
 	.probe = inv_icm42600_probe,
 };
@@ -98,3 +98,4 @@ module_spi_driver(inv_icm42600_driver);
 MODULE_AUTHOR("InvenSense, Inc.");
 MODULE_DESCRIPTION("InvenSense ICM-426xx SPI driver");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(IIO_ICM42600);
Signature · 1 line
2.37.1
author maintainer
#9 lore raw

PATCH 5/5 iio: imu: inv_mpu: Move exports to IIO_MPU6050 namespace

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

As these exports are only relevant to core module and users in the bus specific modules, move them out of the main kernel namespace.

Includes using EXPORT_NS_GPL_DEV_PM_OPS() and the simplifications that brings by allowing the compiler to remove unused struct dev_pm_ops and callbacks without needing explicit __maybe_unused markings.

Cc Jean-Baptiste Maneyrol <[email protected]>
Cc Linus Walleij <[email protected]>
---
 drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 18 ++++++++----------
 drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c  |  3 ++-
 drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c  |  3 ++-
 3 files changed, 12 insertions(+), 12 deletions(-)
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c +8 -10
index 86fbbe904050..27cbc07d6369 100644
@@ -1653,9 +1653,9 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
 	inv_mpu6050_set_power_itg(st, false);
 	return result;
 }
-EXPORT_SYMBOL_GPL(inv_mpu_core_probe);
+EXPORT_SYMBOL_NS_GPL(inv_mpu_core_probe, IIO_MPU6050);
 
-static int __maybe_unused inv_mpu_resume(struct device *dev)
+static int inv_mpu_resume(struct device *dev)
 {
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct inv_mpu6050_state *st = iio_priv(indio_dev);
@@ -1687,7 +1687,7 @@ static int __maybe_unused inv_mpu_resume(struct device *dev)
 	return result;
 }
 
-static int __maybe_unused inv_mpu_suspend(struct device *dev)
+static int inv_mpu_suspend(struct device *dev)
 {
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct inv_mpu6050_state *st = iio_priv(indio_dev);
@@ -1730,7 +1730,7 @@ static int __maybe_unused inv_mpu_suspend(struct device *dev)
 	return result;
 }
 
-static int __maybe_unused inv_mpu_runtime_suspend(struct device *dev)
+static int inv_mpu_runtime_suspend(struct device *dev)
 {
 	struct inv_mpu6050_state *st = iio_priv(dev_get_drvdata(dev));
 	unsigned int sensors;
@@ -1755,7 +1755,7 @@ static int __maybe_unused inv_mpu_runtime_suspend(struct device *dev)
 	return ret;
 }
 
-static int __maybe_unused inv_mpu_runtime_resume(struct device *dev)
+static int inv_mpu_runtime_resume(struct device *dev)
 {
 	struct inv_mpu6050_state *st = iio_priv(dev_get_drvdata(dev));
 	int ret;
@@ -1767,11 +1767,9 @@ static int __maybe_unused inv_mpu_runtime_resume(struct device *dev)
 	return inv_mpu6050_set_power_itg(st, true);
 }
 
-const struct dev_pm_ops inv_mpu_pmops = {
-	SET_SYSTEM_SLEEP_PM_OPS(inv_mpu_suspend, inv_mpu_resume)
-	SET_RUNTIME_PM_OPS(inv_mpu_runtime_suspend, inv_mpu_runtime_resume, NULL)
-};
-EXPORT_SYMBOL_GPL(inv_mpu_pmops);
+EXPORT_NS_GPL_DEV_PM_OPS(inv_mpu_pmops, inv_mpu_suspend, inv_mpu_resume,
+			 inv_mpu_runtime_suspend, inv_mpu_runtime_resume, NULL,
+			 IIO_MPU6050);
 
 MODULE_AUTHOR("Invensense Corporation");
 MODULE_DESCRIPTION("Invensense device MPU6050 driver");
drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c +2 -1
index 2aa647704a79..f89164fabf4b 100644
@@ -269,7 +269,7 @@ static struct i2c_driver inv_mpu_driver = {
 		.of_match_table = inv_of_match,
 		.acpi_match_table = inv_acpi_match,
 		.name	=	"inv-mpu6050-i2c",
-		.pm     =       &inv_mpu_pmops,
+		.pm     =       pm_ptr(&inv_mpu_pmops),
 	},
 };
 
@@ -278,3 +278,4 @@ module_i2c_driver(inv_mpu_driver);
 MODULE_AUTHOR("Invensense Corporation");
 MODULE_DESCRIPTION("Invensense device MPU6050 driver");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(IIO_MPU6050);
drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c +2 -1
index e6107b0cc38f..89f46c2f213d 100644
@@ -154,7 +154,7 @@ static struct spi_driver inv_mpu_driver = {
 		.of_match_table = inv_of_match,
 		.acpi_match_table = inv_acpi_match,
 		.name	=	"inv-mpu6000-spi",
-		.pm     =       &inv_mpu_pmops,
+		.pm     =       pm_ptr(&inv_mpu_pmops),
 	},
 };
 
@@ -163,3 +163,4 @@ module_spi_driver(inv_mpu_driver);
 MODULE_AUTHOR("Adriana Reus <[email protected]>");
 MODULE_DESCRIPTION("Invensense device MPU6000 driver");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(IIO_MPU6050);
Signature · 1 line
2.37.1
Reviewed-by on v1 5/5
#10 lore raw

Re: [PATCH 5/5] iio: imu: inv_mpu: Move exports to IIO_MPU6050 namespace

Quoted 5 lines · Jonathan Cameron

From: Jonathan Cameron <[email protected]>

As these exports are only relevant to core module and users in the bus specific modules, move them out of the main kernel namespace.

Quoted 7 lines

Includes using EXPORT_NS_GPL_DEV_PM_OPS() and the simplifications that brings by allowing the compiler to remove unused struct dev_pm_ops and callbacks without needing explicit __maybe_unused markings.

Cc Jean-Baptiste Maneyrol <[email protected]>
Cc Linus Walleij <[email protected]>

Looks good!

Yours,
Linus Walleij

Reviewed-by on the v1 series
#11 lore raw
In reply to Jonathan Cameron
Quoted 13 lines · Jonathan Cameron

From: Jonathan Cameron <[email protected]>

Perhaps the most complex case we can have is a core driver module (usually with accompanying per bus modules) that exports, in a namespace, a struct dev_pm_ops. The driver has different handling for runtime and sleep suspend / resume so (almost) all callbacks are provided. The pm.h helper macro _EXPORT_DEV_PM_OPS() could be used here but the handling of the last two parameters is unusual and very different from the macros intended for driver usage. First parameter needs to be "_gpl" and second needs to be the namespace specified as a string. Other NS macros take it without quotes.

Quoted 8 lines

As such, this series proposes introducing a suitable macro and then provides a number of IIO driver conversions. Where relevant the exports from the driver are moved into the new namespace.

If accepted we can either take the whole lot through the PM tree and hope there is nothing much else overlapping with this driver code in this cycle, or ideally we could use an immutable branch and pull this into both the IIO and PM trees.

Pretty straightforward and looks useful to me, thanks!

Quoted 25 lines

Jonathan Cameron (5):
PM: core: Add EXPORT_NS_GPL_DEV_PM_OPS to avoid drivers rolling own.
iio: accel: fxls8962af: Use new EXPORT_NS_GPL_DEV_PM_OPS()
iio: gyro: fxas210002c: Move exports to IIO_FXAS210002C namespace.
iio: imu: inv_icm42600: Move exports to IIO_ICM42600 namespace
iio: imu: inv_mpu: Move exports to IIO_MPU6050 namespace

 drivers/iio/accel/fxls8962af-core.c           | 17 +++++++--------
 drivers/iio/accel/fxls8962af-i2c.c            |  2 +-
 drivers/iio/accel/fxls8962af-spi.c            |  2 +-
 drivers/iio/gyro/fxas21002c_core.c            | 21 ++++++++-----------
 drivers/iio/gyro/fxas21002c_i2c.c             |  3 ++-
 drivers/iio/gyro/fxas21002c_spi.c             |  3 ++-
 .../iio/imu/inv_icm42600/inv_icm42600_core.c  | 21 ++++++++-----------
 .../iio/imu/inv_icm42600/inv_icm42600_i2c.c   |  3 ++-
 .../iio/imu/inv_icm42600/inv_icm42600_spi.c   |  3 ++-
 drivers/iio/imu/inv_mpu6050/inv_mpu_core.c    | 18 +++++++---------
 drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c     |  3 ++-
 drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c     |  3 ++-
 include/linux/pm.h                            |  5 +++++
 13 files changed, 52 insertions(+), 52 deletions(-)

--
2.37.1

Signature · 2 lines
With Best Regards,
Andy Shevchenko
Acked-by on the v1 series
#12 lore raw
In reply to Jonathan Cameron
Quoted 21 lines · Jonathan Cameron

From: Jonathan Cameron <[email protected]>

Perhaps the most complex case we can have is a core driver module (usually with accompanying per bus modules) that exports, in a namespace, a struct dev_pm_ops. The driver has different handling for runtime and sleep suspend / resume so (almost) all callbacks are provided. The pm.h helper macro _EXPORT_DEV_PM_OPS() could be used here but the handling of the last two parameters is unusual and very different from the macros intended for driver usage. First parameter needs to be "_gpl" and second needs to be the namespace specified as a string. Other NS macros take it without quotes.

As such, this series proposes introducing a suitable macro and then provides a number of IIO driver conversions. Where relevant the exports from the driver are moved into the new namespace.

If accepted we can either take the whole lot through the PM tree and hope there is nothing much else overlapping with this driver code in this cycle, or ideally we could use an immutable branch and pull this into both the IIO and PM trees.

Quoted 6 lines

Jonathan Cameron (5):
PM: core: Add EXPORT_NS_GPL_DEV_PM_OPS to avoid drivers rolling own.
iio: accel: fxls8962af: Use new EXPORT_NS_GPL_DEV_PM_OPS()
iio: gyro: fxas210002c: Move exports to IIO_FXAS210002C namespace.
iio: imu: inv_icm42600: Move exports to IIO_ICM42600 namespace
iio: imu: inv_mpu: Move exports to IIO_MPU6050 namespace

I like what you done here.

Yours,
Linus Walleij

author maintainer
#13 lore raw
Quoted 30 lines · On Mon, 22 Aug 2022 11:04:18 +0200 Linus Walleij <[email protected]>…
Quoted 21 lines · Jonathan Cameron

From: Jonathan Cameron <[email protected]>

Perhaps the most complex case we can have is a core driver module (usually with accompanying per bus modules) that exports, in a namespace, a struct dev_pm_ops. The driver has different handling for runtime and sleep suspend / resume so (almost) all callbacks are provided. The pm.h helper macro _EXPORT_DEV_PM_OPS() could be used here but the handling of the last two parameters is unusual and very different from the macros intended for driver usage. First parameter needs to be "_gpl" and second needs to be the namespace specified as a string. Other NS macros take it without quotes.

As such, this series proposes introducing a suitable macro and then provides a number of IIO driver conversions. Where relevant the exports from the driver are moved into the new namespace.

If accepted we can either take the whole lot through the PM tree and hope there is nothing much else overlapping with this driver code in this cycle, or ideally we could use an immutable branch and pull this into both the IIO and PM trees.

Quoted 6 lines

Jonathan Cameron (5):
PM: core: Add EXPORT_NS_GPL_DEV_PM_OPS to avoid drivers rolling own.
iio: accel: fxls8962af: Use new EXPORT_NS_GPL_DEV_PM_OPS()
iio: gyro: fxas210002c: Move exports to IIO_FXAS210002C namespace.
iio: imu: inv_icm42600: Move exports to IIO_ICM42600 namespace
iio: imu: inv_mpu: Move exports to IIO_MPU6050 namespace

Quoted 2 lines

I like what you done here.

Unfortunately change of plan because the EXPORT_NS_GPL_DEV_PM_OPS isn't general enough to cover some cases elsewhere.
https://lore.kernel.org/all/[email protected]/

I'll switch this series over to being based on that which will be a large enough change that I'll probably not pick up any tags given on this version.

Thanks

Jonathan

Quoted 3 lines

Yours,
Linus Walleij