SiS748/963L + CMI9739, no IRQs from card?
Hi,
I've described my problem some days ago on the user list, but it seems like no user knows a solution to this -- which is no big surprise as the hardware I'm using is quite new. Perhaps one of the developers can help out.
Here a short summary of the problem:
(details, logs, etc. can be found in my previous messages:
http://www.mail-archive.com/[email protected]/msg10537.html
http://www.mail-archive.com/[email protected]/msg10562.html
)
* Alsa rc1
* ASrock Mainboard K7S8XE with SiS748/963L + CMI9739 onboard sound
* modules loaded without problems
(snd-intel8x0, snd-ac97-codec, ...)
* soundcard is correctly(?) detected: alsamixer shows:
SiS SI7012, C-Media Electronics CMI9739
* mixer is working fine (I can control e.g. the volume of CD analog input)
* PCM playback blocks: applications seem to wait for interrupt from soundcard. When running e.g. aplay, proc/asound/card0/pcm0p/sub0/state shows
state: RUNNINGtrigger_time: 1070397701.434501000
tstamp : 1070397750.192659000
delay : 7194
avail : 4806avail_max : 0
-----hw_ptr : 4804appl_ptr : 11998
and hw_ptr doesn't change over time. I have no sound daemon running. Before starting aplay the sub0/state was 'closed'.
* same behaviour with oss-layer, alsa, alsa mmap. xmms hangs when I hit the play button.
* No PCM sound is output
* /proc/interrupts shows no IRQs sent from soundcard:
...
2: 0 XT-PIC cascade 5: 0 XT-PIC usb-ohci, ehci_hcd, SiS SI7012 8: 1 XT-PIC rtc
...
Is there anything else I could try? Any additional debugging information I can provide besides the info in the 2 user-list mails mentioned above? Thanks in advance for any help!
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/
Quoted 3 lines · Friedrich Ewaldt
Is there anything else I could try? Any additional debugging information I can provide besides the info in the 2 user-list mails mentioned above? Thanks in advance for any help!
have you tried enabling the kernel build options 'IO-APIC support on uniprocessors' and 'Local APIC Support on Uniprocessors' yet (provided your box does ACPI; probably so since you say it is a recent design)?
i ask because on this box there were dropped interrupts from the audio interface when the interrupt line was also shared between three devices. enabling the above options rendered the interface with an exclusive interrupt line, with good results.
if your kernel was already built with those options turned on, check the kernel boot options for 'pci=noacpi' or 'acpi=off'.
hth,
tim
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/