Flat device tree support for 85xx ADS and CDS boards
cover Flat device tree support for 85xx ADS and CDS boards
Seven patches on the way which add support for using the Flat device tree in u-boot to pass device initialization information to Linux, which is used for 85xx support in the arch/powerpc tree.
These patches build on the previous patches, which add 8540 ADS support (without PCI).
In addition, as part of the update, PCI initialization has been moved fully into u-boot, so all PCI busses are now scanned and configured.
Here's the index of the patches:
1: Fix prefetch disabling code in drivers/pci_auto.c so it sets the memory limit to 0 (instead of 0x1000)
2: Adds PCI-X #defines for PCI-X initialization
3: Fixes a bug in the fdt setup code for 85xx, where memory size was not updated based on reality
4: Adds support for initializing the second PCI bus
5: Adds PCI and I2C fdt support for 8540ADS
6: Adds PCI and I2C fdt support for 85xx CDS
7: Changes the 8540 ADS PCI speed back to 66 MHz, and adds warnings and comments to the effect that PCI-X will not work unless it's running at 66 MHz.