docs: ramdisk/initrd/initramfs corrections
PATCH 1/1 docs: ramdisk/initrd/initramfs corrections
From: Randy Dunlap <[email protected]>
initrd/initramfs/ramdisk docs:
- fix typos/spellos/grammar
- clarify RAM disk config location
- correct cpio option
--- Documentation/early-userspace/README | 6 +++--- Documentation/filesystems/ramfs-rootfs-initramfs.txt | 14 +++++++------- Documentation/initrd.txt | 12 ++++++------ Documentation/ramdisk.txt | 17 +++++++++++------ 4 files changed, 27 insertions(+), 22 deletions(-)
Documentation/ramdisk.txt +11 -6
@@ -22,16 +22,21 @@ The RAM disk dynamically grows as more s RAM from the buffer cache. The driver marks the buffers it is using as dirty so that the VM subsystem does not try to reclaim them later. -Also, the RAM disk supports up to 16 RAM disks out of the box, and can -be reconfigured to support up to 255 RAM disks - change "#define NUM_RAMDISKS" -in drivers/block/rd.c. To use RAM disk support with your system, run -'./MAKEDEV ram' from the /dev directory. RAM disks are all major number 1, and -start with minor number 0 for /dev/ram0, etc. If used, modern kernels use -/dev/ram0 for an initrd. +The RAM disk supports up to 16 RAM disks by default, and can be reconfigured +to support an unlimited number of RAM disks (at your own risk). Just change +the configuration symbol BLK_DEV_RAM_COUNT in the Block drivers config menu +and (re)build the kernel. + +To use RAM disk support with your system, run './MAKEDEV ram' from the /dev +directory. RAM disks are all major number 1, and start with minor number 0 +for /dev/ram0, etc. If used, modern kernels use /dev/ram0 for an initrd. The old "ramdisk=<ram_size>" has been changed to "ramdisk_size=<ram_size>" to make it clearer. The original "ramdisk=<ram_size>" has been kept around for compatibility reasons, but it may be removed in the future. +There are also config symbols (in the Block drivers config menu) for these +variables: BLK_DEV_RAM_SIZE defaults to 4096 and BLK_DEV_RAM_BLOCKSIZE +defaults to 1024. The new RAM disk also has the ability to load compressed RAM disk images, allowing one to squeeze more programs onto an average installation or
Documentation/initrd.txt +6 -6
@@ -80,8 +80,8 @@ Compressed cpio images ---------------------- Recent kernels have support for populating a ramdisk from a compressed cpio -archive, on such systems, the creation of a ramdisk image doesn't need to -involve special block devices or loopbacks, you merely create a directory on +archive. On such systems, the creation of a ramdisk image doesn't need to +involve special block devices or loopbacks; you merely create a directory on disk with the desired initrd content, cd to that directory, and run (as an example):
@@ -293,7 +293,7 @@ information as small as possible. In thi generated with all the necessary modules. Then, only /sbin/init or a file read by it would have to be different. -A third scenario are more convenient recovery disks, because information +A third scenario is more convenient recovery disks, because information like the location of the root FS partition doesn't have to be provided at boot time, but the system loaded from initrd can invoke a user-friendly dialog and it can also perform some sanity checks (or even some form of
@@ -339,8 +339,8 @@ the new, supported mechanism is called " Mixed change_root and pivot_root mechanism ------------------------------------------ -In case you did not want to use root=/dev/ram0 to trig the pivot_root mechanism, -you may create both /linuxrc and /sbin/init in your initrd image. +In case you did not want to use root=/dev/ram0 to trigger the pivot_root +mechanism, you may create both /linuxrc and /sbin/init in your initrd image. /linuxrc would contain only the following:
@@ -350,7 +350,7 @@ echo 0x0100 >/proc/sys/kernel/real-root- umount -n /proc Once linuxrc exited, the kernel would mount again your initrd as root, -this time executing /sbin/init. Again, it would be duty of this init +this time executing /sbin/init. Again, it would be the duty of this init to build the right environment (maybe using the root= device passed on the cmdline) before the final execution of the real /sbin/init.
Documentation/filesystems/ramfs-rootfs-initramfs.txt +7 -7
@@ -8,7 +8,7 @@ What is ramfs? Ramfs is a very simple filesystem that exports Linux's disk caching mechanisms (the page cache and dentry cache) as a dynamically resizable -ram-based filesystem. +RAM-based filesystem. Normally all files are cached in memory by Linux. Pages of data read from backing store (usually the block device the filesystem is mounted on) are kept
@@ -34,7 +34,7 @@ ramfs and ramdisk: ------------------ The older "ram disk" mechanism created a synthetic block device out of -an area of ram and used it as backing store for a filesystem. This block +an area of RAM and used it as backing store for a filesystem. This block device was of fixed size, so the filesystem mounted on it was of fixed size. Using a ram disk also required unnecessarily copying memory from the fake block device into the page cache (and copying changes back out), as well
@@ -46,8 +46,8 @@ unnecessary work for the CPU, and pollut to avoid this copying by playing with the page tables, but they're unpleasantly complicated and turn out to be about as expensive as the copying anyway.) More to the point, all the work ramfs is doing has to happen _anyway_, -since all file access goes through the page and dentry caches. The ram -disk is simply unnecessary, ramfs is internally much simpler. +since all file access goes through the page and dentry caches. The RAM +disk is simply unnecessary; ramfs is internally much simpler. Another reason ramdisks are semi-obsolete is that the introduction of loopback devices offered a more flexible and convenient way to create
@@ -103,7 +103,7 @@ All this differs from the old initrd in initramfs archive is a gzipped cpio archive (like tar only simpler, see cpio(1) and Documentation/early-userspace/buffer-format.txt). The kernel's cpio extraction code is not only extremely small, it's also - __init data that can be discarded during the boot process. + __init text and data that can be discarded during the boot process. - The program run by the old initrd (which was called /initrd, not /init) did some setup and then returned to the kernel, while the init program from
@@ -220,7 +220,7 @@ device) but the separate packaging of in non-GPL code you'd like to run from initramfs, without conflating it with the GPL licensed Linux kernel binary). -It can also be used to supplement the kernel's built-in initamfs image. The +It can also be used to supplement the kernel's built-in initramfs image. The files in the external archive will overwrite any conflicting files in the built-in initramfs archive. Some distributors also prefer to customize a single kernel image with task-specific initramfs images, without recompiling.
@@ -339,7 +339,7 @@ smooth transition and allowing early boo The move to early userspace is necessary because finding and mounting the real root device is complex. Root partitions can span multiple devices (raid or separate journal). They can be out on the network (requiring dhcp, setting a -specific mac address, logging into a server, etc). They can live on removable +specific MAC address, logging into a server, etc). They can live on removable media, with dynamically allocated major/minor numbers and persistent naming issues requiring a full udev implementation to sort out. They can be compressed, encrypted, copy-on-write, loopback mounted, strangely partitioned,
Documentation/early-userspace/README +3 -3
@@ -19,7 +19,7 @@ It consists of several major infrastruct - klibc, a userspace C library, currently packaged separately, that is optimized for correctness and small size. -The cpio file format used by initramfs is the "newc" (aka "cpio -c") +The cpio file format used by initramfs is the "newc" (aka "cpio -H newc") format, and is documented in the file "buffer-format.txt". There are two ways to add an early userspace image: specify an existing cpio archive to be used as the image or have the kernel build process build
@@ -44,7 +44,7 @@ The image is specified as one or more so CONFIG_INITRAMFS_SOURCE. Sources can be either directories or files - cpio archives are *not* allowed when building from sources. -A source directory will have it and all of it's contents packaged. The +A source directory will have it and all of its contents packaged. The specified directory name will be mapped to '/'. When packaging a directory, limited user and group ID translation can be performed. INITRAMFS_ROOT_UID can be set to a user ID that needs to be mapped to
@@ -144,7 +144,7 @@ c) using initramfs. The call to prepare initrd format, an cpio archive. It must be called "/init". This binary is responsible to do all the things prepare_namespace() would do. - To remain backwards compatibility, the /init binary will only run if it + To maintain backwards compatibility, the /init binary will only run if it comes via an initramfs cpio archive. If this is not the case, init/main.c:init() will run prepare_namespace() to mount the final root and exec one of the predefined init binaries.
On Thu, 30 Aug 2007, Randy Dunlap wrote:
...
Quoted 4 lines
The old "ramdisk=<ram_size>" has been changed to "ramdisk_size=<ram_size>" to make it clearer. The original "ramdisk=<ram_size>" has been kept around for compatibility reasons, but it may be removed in the future.
...
i just the other day submitted a patch to remove that backward compatibility, and the m68k portion of it has already been acked by geert uytterhoeven.
rday
Signature · 7 lines
======================================================================== Robert P. J. Day Linux Consulting, Training and Annoying Kernel Pedantry Waterloo, Ontario, CANADA http://crashcourse.ca ========================================================================
Quoted 9 lines · Robert P. J. Day
On Thu, 30 Aug 2007, Randy Dunlap wrote:
...
Quoted 4 lines
The old "ramdisk=<ram_size>" has been changed to "ramdisk_size=<ram_size>" to make it clearer. The original "ramdisk=<ram_size>" has been kept around for compatibility reasons, but it may be removed in the future.
Quoted 5 lines
...
i just the other day submitted a patch to remove that backward compatibility, and the m68k portion of it has already been acked by geert uytterhoeven.
Could you mention it in feature-removal-schedule.txt? (People check that for warning of upcoming changes that impact existing code. They may not notice something elsewhere after they've got it working...)
(Also, sorting feature-removal-schedule.txt by date would be really nice. The sucker's gotten huge...)
And while I'm looking at this, is there some other place that entries in this file go once they _have_ been removed, so people can see "oh yeah, that went away in 2.6.23) when they try to install 2.6.25? If there is, I missed it. Maybe http://lwn.net/Articles/2.6-kernel-api/ is good enough, but this seems easy to do in Documentation...
Thanks,
Rob
Signature · 2 lines
"One of my most productive days was throwing away 1000 lines of code." - Ken Thompson.
Quoted 9 lines · Rob Landley
Quoted 8 lines · Robert P. J. Day
On Thu, 30 Aug 2007, Randy Dunlap wrote:
...
Quoted 4 lines
The old "ramdisk=<ram_size>" has been changed to "ramdisk_size=<ram_size>" to make it clearer. The original "ramdisk=<ram_size>" has been kept around for compatibility reasons, but it may be removed in the future.
Quoted 8 lines
Quoted 5 lines
...
i just the other day submitted a patch to remove that backward compatibility, and the m68k portion of it has already been acked by geert uytterhoeven.
Could you mention it in feature-removal-schedule.txt? (People check that for warning of upcoming changes that impact existing code. They may not notice something elsewhere after they've got it working...)
The same objection applies to this as to the previous one. In that respect, an Ack from a maintainer of an almost unused architecture is meaningless (sorry, Geert.)
-hpa
Quoted 10 lines · On Thu, 30 Aug 2007 15:41:27 -0700 H. Peter Anvin wrote:
Quoted 9 lines · Rob Landley
Quoted 8 lines · Robert P. J. Day
On Thu, 30 Aug 2007, Randy Dunlap wrote:
...
Quoted 4 lines
The old "ramdisk=<ram_size>" has been changed to "ramdisk_size=<ram_size>" to make it clearer. The original "ramdisk=<ram_size>" has been kept around for compatibility reasons, but it may be removed in the future.
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
...
i just the other day submitted a patch to remove that backward compatibility, and the m68k portion of it has already been acked by geert uytterhoeven.
I couldn't find it. Can you provide a pointer to it?
Quoted 8 lines
Quoted 4 lines
Could you mention it in feature-removal-schedule.txt? (People check that for warning of upcoming changes that impact existing code. They may not notice something elsewhere after they've got it working...)
The same objection applies to this as to the previous one. In that respect, an Ack from a maintainer of an almost unused architecture is meaningless (sorry, Geert.)
Peter, what are you objecting to, Rob's comment, Robert's comment, Robert's patch, or my patch?
Thanks.
---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
Quoted 18 lines · Randy Dunlap
Quoted 10 lines · On Thu, 30 Aug 2007 15:41:27 -0700 H. Peter Anvin wrote:
Quoted 9 lines · Rob Landley
Quoted 8 lines · Robert P. J. Day
On Thu, 30 Aug 2007, Randy Dunlap wrote:
...
Quoted 4 lines
The old "ramdisk=<ram_size>" has been changed to "ramdisk_size=<ram_size>" to make it clearer. The original "ramdisk=<ram_size>" has been kept around for compatibility reasons, but it may be removed in the future.
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
...
i just the other day submitted a patch to remove that backward compatibility, and the m68k portion of it has already been acked by geert uytterhoeven.
Quoted 9 lines
I couldn't find it. Can you provide a pointer to it?
Quoted 3 lines
Quoted 2 lines
Could you mention it in feature-removal-schedule.txt? (People check that for warning of upcoming changes that impact existing code. They may not notice something elsewhere after they've got it working...)
The same objection applies to this as to the previous one. In that respect, an Ack from a maintainer of an almost unused architecture is meaningless (sorry, Geert.)
Peter, what are you objecting to, Rob's comment, Robert's comment, Robert's patch, or my patch?
Robert's patch.
-hpa
Quoted 12 lines · Randy Dunlap
Quoted 10 lines · On Thu, 30 Aug 2007 15:41:27 -0700 H. Peter Anvin wrote:
Quoted 9 lines · Rob Landley
Quoted 8 lines · Robert P. J. Day
On Thu, 30 Aug 2007, Randy Dunlap wrote:
...
Quoted 4 lines
The old "ramdisk=<ram_size>" has been changed to "ramdisk_size=<ram_size>" to make it clearer. The original "ramdisk=<ram_size>" has been kept around for compatibility reasons, but it may be removed in the future.
Quoted 7 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
...
i just the other day submitted a patch to remove that backward compatibility, and the m68k portion of it has already been acked by geert uytterhoeven.
I couldn't find it. Can you provide a pointer to it?
sure. http://marc.info/?l=linux-kernel&m=118828410509208&w=2
Quoted 7 lines
Quoted 7 lines
Quoted 6 lines
Could you mention it in feature-removal-schedule.txt? (People check that for warning of upcoming changes that impact existing code. They may not notice something elsewhere after they've got it working...)
Quoted 6 lines
Quoted 3 lines
The same objection applies to this as to the previous one. In that respect, an Ack from a maintainer of an almost unused architecture is meaningless (sorry, Geert.)
Peter, what are you objecting to, Rob's comment, Robert's comment, Robert's patch, or my patch?
i'm sure he's objecting to my aforementioned patch.
rday
Signature · 7 lines
======================================================================== Robert P. J. Day Linux Consulting, Training and Annoying Kernel Pedantry Waterloo, Ontario, CANADA http://crashcourse.ca ========================================================================
Quoted 22 lines · H. Peter Anvin
Quoted 11 lines · Rob Landley
Quoted 10 lines · Robert P. J. Day
On Thu, 30 Aug 2007, Randy Dunlap wrote:
...
Quoted 4 lines
The old "ramdisk=<ram_size>" has been changed to "ramdisk_size=<ram_size>" to make it clearer. The original "ramdisk=<ram_size>" has been kept around for compatibility reasons, but it may be removed in the future.
...
Quoted 9 lines
Quoted 3 lines
i just the other day submitted a patch to remove that backward compatibility, and the m68k portion of it has already been acked by geert uytterhoeven.
Could you mention it in feature-removal-schedule.txt? (People check that for warning of upcoming changes that impact existing code. They may not notice something elsewhere after they've got it working...)
Quoted 3 lines
The same objection applies to this as to the previous one. In that respect, an Ack from a maintainer of an almost unused architecture is meaningless (sorry, Geert.)
fair enough, but since i posted that patch to LKML three days ago, someone *could* have NAKed it at the time.
rday
Signature · 7 lines
======================================================================== Robert P. J. Day Linux Consulting, Training and Annoying Kernel Pedantry Waterloo, Ontario, CANADA http://crashcourse.ca ========================================================================
Quoted 16 lines · H. Peter Anvin
Quoted 15 lines · Rob Landley
Quoted 13 lines · Robert P. J. Day
On Thu, 30 Aug 2007, Randy Dunlap wrote:
...
Quoted 4 lines
The old "ramdisk=<ram_size>" has been changed to "ramdisk_size=<ram_size>" to make it clearer. The original "ramdisk=<ram_size>" has been kept around for compatibility reasons, but it may be removed in the future.
...
i just the other day submitted a patch to remove that backward compatibility, and the m68k portion of it has already been acked by geert uytterhoeven.
Quoted 8 lines
Quoted 4 lines
Could you mention it in feature-removal-schedule.txt? (People check that for warning of upcoming changes that impact existing code. They may not notice something elsewhere after they've got it working...)
The same objection applies to this as to the previous one. In that respect, an Ack from a maintainer of an almost unused architecture is meaningless (sorry, Geert.)
Of course I ack'ed the m68k part, iff the non-arch-specific part was accepted.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Quoted 12 lines · Rob Landley
Quoted 11 lines · Robert P. J. Day
On Thu, 30 Aug 2007, Randy Dunlap wrote:
...
Quoted 4 lines
The old "ramdisk=<ram_size>" has been changed to "ramdisk_size=<ram_size>" to make it clearer. The original "ramdisk=<ram_size>" has been kept around for compatibility reasons, but it may be removed in the future.
...
Quoted 8 lines
Quoted 3 lines
i just the other day submitted a patch to remove that backward compatibility, and the m68k portion of it has already been acked by geert uytterhoeven.
Could you mention it in feature-removal-schedule.txt? (People check that for warning of upcoming changes that impact existing code. They may not notice something elsewhere after they've got it working...)
you know, if it makes everyone happier, why don't i just leave that as it is and move on? apparently, i have a different understanding of the word "deprecated" from a number of others here, and it's really not worth arguing about anymore.
rday
Signature · 7 lines
======================================================================== Robert P. J. Day Linux Consulting, Training and Annoying Kernel Pedantry Waterloo, Ontario, CANADA http://crashcourse.ca ========================================================================
Quoted 6 lines · Rob Landley
Could you mention it in feature-removal-schedule.txt? (People check that for warning of upcoming changes that impact existing code. They may not notice something elsewhere after they've got it working...)
(Also, sorting feature-removal-schedule.txt by date would be really nice. The sucker's gotten huge...)
Maybe it's time we actually start heaving stuff over the side, especially that stuff that the removal date has gone by?
What: dev->power.power_state When: July 2007 What: Video4Linux API 1 ioctls and video_decoder.h from Video devices. When: December 2006 What: remove EXPORT_SYMBOL(kernel_thread) When: August 2006 What: CONFIG_FORCED_INLINING When: June 2006 What: eepro100 network driver When: January 2007
5 out of 26 things - close to 20% - is already overdue for nuking. In some cases, over a year overdue.
Quoted 12 lines · On Fri, 31 Aug 2007, [email protected] wrote:
Quoted 6 lines · Rob Landley
Could you mention it in feature-removal-schedule.txt? (People check that for warning of upcoming changes that impact existing code. They may not notice something elsewhere after they've got it working...)
(Also, sorting feature-removal-schedule.txt by date would be really nice. The sucker's gotten huge...)
Maybe it's time we actually start heaving stuff over the side, especially that stuff that the removal date has gone by?
Quoted 10 lines
What: dev->power.power_state When: July 2007 What: Video4Linux API 1 ioctls and video_decoder.h from Video devices. When: December 2006 What: remove EXPORT_SYMBOL(kernel_thread) When: August 2006 What: CONFIG_FORCED_INLINING When: June 2006 What: eepro100 network driver When: January 2007
some of that has already been discussed and postponed slightly, like the eepro100 stuff:
http://marc.info/?l=linux-kernel&m=118827478527526&w=2
but some of the rest is definitely overdue.
rday
Signature · 7 lines
======================================================================== Robert P. J. Day Linux Consulting, Training and Annoying Kernel Pedantry Waterloo, Ontario, CANADA http://crashcourse.ca ========================================================================
Quoted 8 lines · Randy Dunlap
From: Randy Dunlap <[email protected]>
initrd/initramfs/ramdisk docs:
- fix typos/spellos/grammar
- clarify RAM disk config location
- correct cpio optionCc Bryan O'Sullivan <[email protected]>
Quoted 7 lines · Randy Dunlap
From: Randy Dunlap <[email protected]>
initrd/initramfs/ramdisk docs:
- fix typos/spellos/grammar
- clarify RAM disk config location
- correct cpio option
Quoted 6 lines
Cc Bryan O'Sullivan <[email protected]>Cc Rob Landley <[email protected]>Cc Werner Almesberger <[email protected]>Cc H. Peter Anvin <[email protected]>Signed-off-by Randy Dunlap <[email protected]>
Rob
Signature · 2 lines
"One of my most productive days was throwing away 1000 lines of code." - Ken Thompson.
Quoted 7 lines · Randy Dunlap
From: Randy Dunlap <[email protected]>
initrd/initramfs/ramdisk docs:
- fix typos/spellos/grammar
- clarify RAM disk config location
- correct cpio option
Quoted 6 lines
Cc Bryan O'Sullivan <[email protected]>Cc Rob Landley <[email protected]>Cc Werner Almesberger <[email protected]>Cc H. Peter Anvin <[email protected]>Signed-off-by Randy Dunlap <[email protected]>
...
Hi Randy,
I read through your changes and they seem reasonable to me, so for what it's worth;
Signature · 3 lines
Jesper Juhl <[email protected]> Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html Plain text mails only, please http://www.expita.com/nomime.html