ttyS* names missing in /proc/interrupts?
Just noticed in 2.6.29-rc7+git: lines corresponding to 8250 ttyS* serial ports have no device name in /proc interrupts:
CPU0
0: 35 XT-PIC-XT timer 1: 338 XT-PIC-XT i8042 2: 0 XT-PIC-XT cascade 3: 3 XT-PIC-XT 4: 3 XT-PIC-XT 6: 5 XT-PIC-XT floppy 7: 1 XT-PIC-XT parport0 8: 2 XT-PIC-XT rtc0 9: 41 XT-PIC-XT acpi, qla2xxx, tr1 10: 1 XT-PIC-XT Intel 82801BA-ICH2 11: 160060 XT-PIC-XT uhci_hcd:usb1, uhci_hcd:usb2, lpfc, tr0, eth0, mga@pci:0000:02:00.0 12: 141 XT-PIC-XT i8042 14: 88730 XT-PIC-XT ata_piix 15: 1190012 XT-PIC-XT ata_piix NMI: 0 Non-maskable interrupts LOC: 1028718 Local timer interrupts TRM: 0 Thermal event interrupts SPU: 0 Spurious interrupts ERR: 0
$ dmesg | grep tty console [tty0] enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
And similarly on another machine.
Signature · 1 line
Meelis Roos ([email protected])
Quoted 2 lines · Meelis Roos
Just noticed in 2.6.29-rc7+git: lines corresponding to 8250 ttyS* serial ports have no device name in /proc interrupts:
They only show up while the ports are open and the interrupt enabled.
-hpa
Signature · 2 lines
H. Peter Anvin, Intel Open Source Technology Center I work for Intel. I don't speak on their behalf.