tiny IDE fixes
PATCH 1/1 tiny IDE fixes
In order to use all of my 160 GB disk, I booted linux-2.4.18-pre7-ac3 and was told that it had geometry 317632/255/63, a disk of terabyte size. Moving the assignment to cyls two lines this becomes 19929/255/63, as expected.
The deleted part in the first hunk is dead code.
As remarked earlier, all addr++ should be done only when something was assigned to addr. Maybe there are more such places.
Apart from such tiny flaws, everything works beautifully.
Andre, in this geometry stuff more than half of the code can be deleted. For example, drive->CHS is used when talking CHS with the drive; no use assigning very large values to drive->C; nobody will ever use such values. Then again, bios_CHS is what the BIOS tells us, which is to be used by fdisk and lilo.
Again, no use assigning very large values to bios_cyl. fdisk has only 10 bits to write these values in,
lilo cannot use more than 16 bits.
In particular, the ioctl HDIO_GETGEO_BIG is superfluous.
I said it before and I repeat: I really hope that you remove all occurrences of HDIO_GETGEO_BIG. The values returned by it are not used by fdisk, or by lilo, or by the kernel, or by the disk drive, they are just nonsense numbers.
The convention for the use of HDIO_GETGEO is:
Get heads and sectors from HDIO_GETGEO. In case one wants cylinders, ask for total size with BLKGETSIZE and divide by heads*sectors. Consider the cyls field of the struct returned by HDIO_GETGEO to be undefined.
Andries
linux/drivers/ide/ide-disk.c renamed from linux-2.4.18-pre7-ac3/linux/drivers/ide/ide-disk.c +4 -9
@@ -111,11 +111,6 @@ {unsigned long lba_sects, chs_sects, head, tail; -if ((id->command_set_2 &0x0400 ) && (id->cfs_enable_2 &0x0400 )) { -printk ("48-bit Drive: %llu \n" , id->lba_capacity_2); -return 1 ; - } -/* * The ATA spec tells large drives to return * C/H/S = 16383/16/63 independent of their size.
@@ -789,8 +784,8 @@ | ((args.tfRegister[ IDE_HCYL_OFFSET] ) << 16) | ((args.tfRegister[IDE_LCYL_OFFSET ] ) <<8 ) | ((args.tfRegister[IDE_SECTOR_OFFSET ] )); + addr++;/* since the return value is (maxlba - 1), we add 1 */ } - addr++;/* since the return value is (maxlba - 1), we add 1 */ return addr; }
@@ -818,8 +813,8 @@ ((args.tfRegister[IDE_LCYL_OFFSET ])<<8 ) | (args.tfRegister[IDE_SECTOR_OFFSET ]); addr = ((__u64 )high <<24 ) | low; + addr++;/* since the return value is (maxlba - 1), we add 1 */ } - addr++;/* since the return value is (maxlba - 1), we add 1 */ return addr; }
@@ -850,8 +845,8 @@ | ((args.tfRegister[ IDE_HCYL_OFFSET] ) << 16) | ((args.tfRegister[IDE_LCYL_OFFSET ] ) <<8 ) | ((args.tfRegister[IDE_SECTOR_OFFSET ] )); + addr_set++; } - addr_set++;return addr_set; }
@@ -929,9 +924,9 @@if (id->cfs_enable_2 &0x0400 ) { capacity_2 = id->lba_capacity_2; - drive->cyl = (unsigned int ) capacity_2 / (drive->head * drive->sect); drive->head = drive->bios_head =255 ; drive->sect = drive->bios_sect =63 ; + drive->cyl = (unsigned int ) capacity_2 / (drive->head * drive->sect); drive->select.b.lba =1 ; set_max_ext =idedisk_read_native_max_address_ext (drive);if (set_max_ext > capacity_2) {
Yep, fixed that a few nights ago ...
Quoted 93 lines · On Sun, 10 Feb 2002 [email protected] wrote:
In order to use all of my 160 GB disk, I booted linux-2.4.18-pre7-ac3 and was told that it had geometry 317632/255/63, a disk of terabyte size. Moving the assignment to cyls two lines this becomes 19929/255/63, as expected.
The deleted part in the first hunk is dead code.
As remarked earlier, all addr++ should be done only when something was assigned to addr. Maybe there are more such places.
Apart from such tiny flaws, everything works beautifully.
Andre, in this geometry stuff more than half of the code can be deleted. For example,
drive->CHSis used when talking CHS with the drive; no use assigning very large values todrive->C; nobody will ever use such values. Then again,bios_CHSis what the BIOS tells us, which is to be used by fdisk and lilo.
Again, no use assigning very large values tobios_cyl. fdisk has only 10 bits to write these values in,
lilo cannot use more than 16 bits.
In particular, the ioctlHDIO_GETGEO_BIGis superfluous.I said it before and I repeat: I really hope that you remove all occurrences of
HDIO_GETGEO_BIG. The values returned by it are not used by fdisk, or by lilo, or by the kernel, or by the disk drive, they are just nonsense numbers.The convention for the use of
HDIO_GETGEOis:
Get heads and sectors fromHDIO_GETGEO. In case one wants cylinders, ask for total size with BLKGETSIZE and divide by heads*sectors. Consider the cyls field of the struct returned byHDIO_GETGEOto be undefined.Andries
diff -u --recursive --new-file
../linux-2.4.18-pre7-ac3/linux/drivers/ide/ide-disk.c./linux/drivers/ide/ide-disk.clinux/drivers/ide/ide-disk.c renamed from linux-2.4.18-pre7-ac3/linux/drivers/ide/ide-disk.c +4
-10@@ -111,11 +111,6 @@ {unsigned long lba_sects, chs_sects, head, tail; -if ((id->command_set_2 &0x0400 ) && (id->cfs_enable_2 &0x0400 )) { -printk ("48-bit Drive: %llu \n" , id->lba_capacity_2); -return 1 ; - } -/* * The ATA spec tells large drives to return * C/H/S = 16383/16/63 independent of their size. @@ -789,8 +784,8 @@ | ((args.tfRegister[ IDE_HCYL_OFFSET] ) << 16) | ((args.tfRegister[IDE_LCYL_OFFSET ] ) <<8 ) | ((args.tfRegister[IDE_SECTOR_OFFSET ] )); + addr++;/* since the return value is (maxlba - 1), we add 1 */ } - addr++;/* since the return value is (maxlba - 1), we add 1 */ return addr; }@@ -818,8 +813,8 @@ ((args.tfRegister[IDE_LCYL_OFFSET ])<<8 ) | (args.tfRegister[IDE_SECTOR_OFFSET ]); addr = ((__u64 )high <<24 ) | low; + addr++;/* since the return value is (maxlba - 1), we add 1 */ } - addr++;/* since the return value is (maxlba - 1), we add 1 */ return addr; }@@ -850,8 +845,8 @@ | ((args.tfRegister[ IDE_HCYL_OFFSET] ) << 16) | ((args.tfRegister[IDE_LCYL_OFFSET ] ) <<8 ) | ((args.tfRegister[IDE_SECTOR_OFFSET ] )); + addr_set++; } - addr_set++;return addr_set; }@@ -929,9 +924,9 @@if (id->cfs_enable_2 &0x0400 ) { capacity_2 = id->lba_capacity_2; - drive->cyl = (unsigned int ) capacity_2 / (drive->head * drive->sect); drive->head = drive->bios_head =255 ; drive->sect = drive->bios_sect =63 ; + drive->cyl = (unsigned int ) capacity_2 / (drive->head * drive->sect); drive->select.b.lba =1 ; set_max_ext =idedisk_read_native_max_address_ext (drive);if (set_max_ext > capacity_2) { -
Quoted 5 lines
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Andre Hedrick
Linux Disk Certification Project Linux ATA Development