Skip to contentSkip to conversation

Need to force IDE geometry

DISCUSSION [email protected] 2 participants 2 messages Feb 15, 2002 – Feb 16, 2002

lore
Share & tools
lore
#0 lore raw
Quoted 1 line

I have a problem with the way the kernel handles geometry.

Your question is based on your assumptions about geometry and LBA. But your assumptions are incorrect, and therefore your questions do not make sense. Please tell what you do and what error messages you get.

Andries

Quoted 1 line

Else it will be in CHS mode. (ungood)

False.

#1 lore raw
Quoted 7 lines · On Fri, 15 Feb 2002 [email protected] wrote:
Quoted 1 line

I have a problem with the way the kernel handles geometry.

Your question is based on your assumptions about geometry and LBA. But your assumptions are incorrect, and therefore your questions do not make sense. Please tell what you do and what error messages you get.

Quoted 6 lines

Andries

Quoted 1 line

Else it will be in CHS mode. (ungood)

False.

It is simple, the raid cards force LBA in the BIOS but Linux choose to NUKE it and thus the offsets for finding the reserved sectors is all wrong. Again we (you) have forced drives to run in CHS by default and it is wrong. We can debate but if the drive supports LBA we must force LBA in the kernel.

Now I am out of this argument.

Cheers,

Andre Hedrick
Linux Disk Certification Project Linux ATA Development