5.10.4-rc1 review

This is the start of the stable review cycle for the 5.10.4 release. There are 717 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 30 Dec 2020 12:48:23 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.4-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 5.10.4-rc1

Damien Le Moal <[email protected]>
null_blk: Fail zone append to conventional zones

Damien Le Moal <[email protected]>
null_blk: Fix zone size initialization

Steven Rostedt (VMware) <[email protected]>
Revert: "ring-buffer: Remove HAVE_64BIT_ALIGNED_ACCESS"

Nikita Shubin <[email protected]>
rtc: ep93xx: Fix NULL pointer dereference in ep93xx_rtc_read_time

Zhuguangqing <[email protected]>
thermal/drivers/cpufreq_cooling: Update cpufreq_state only if state has changed

Bjorn Andersson <[email protected]>
remoteproc: sysmon: Ensure remote notification ordering

DingHua Ma <[email protected]>

    regulator: axp20x: Fix DLDO2 voltage control register mask for AXP22x

Jubin Zhong <[email protected]>
PCI: Fix pci_slot_release() NULL pointer dereference

Johan Hovold <[email protected]>
of: fix linker-section match-table corruption

Felix Fietkau <[email protected]>
mt76: add back the SUPPORTS_REORDERING_BUFFER flag

Masami Hiramatsu <[email protected]>
tracing: Disable ftrace selftests when any tracer is running

Carlos Garnacho <[email protected]>
platform/x86: intel-vbtn: Allow switch events on Acer Switch Alpha 12

Dan Williams <[email protected]>
libnvdimm/namespace: Fix reaping of invalidated block-window-namespace labels

Lad Prabhakar <[email protected]>
memory: renesas-rpc-if: Fix unbalanced pm_runtime_enable in rpcif_{enable,disable}_rpm

Lad Prabhakar <[email protected]>
memory: renesas-rpc-if: Return correct value to the caller of rpcif_manual_xfer()

Lad Prabhakar <[email protected]>
memory: renesas-rpc-if: Fix a node reference leak in rpcif_probe()

Dan Carpenter <[email protected]>
memory: jz4780_nemc: Fix an error pointer vs NULL check in probe()

SeongJae Park <[email protected]>
xenbus/xenbus_backend: Disallow pending watch messages

SeongJae Park <[email protected]>
xen/xenbus: Count pending messages for each watch

SeongJae Park <[email protected]>
xen/xenbus/xen_bus_type: Support will_handle watch callback

SeongJae Park <[email protected]>
xen/xenbus: Add 'will_handle' callback support in xenbus_watch_path()

SeongJae Park <[email protected]>
xen/xenbus: Allow watches discard events before queueing

Pawel Wieczorkiewicz <[email protected]>

    xen-blkback: set ring->xenblkd to NULL after kthread_stop()

Takashi Iwai <[email protected]>
driver: core: Fix list corruption after device_del()

Maarten Lankhorst <[email protected]>
dma-buf/dma-resv: Respect num_fences when initializing the shared fence list.

Wang Hai <[email protected]>
device-dax/core: Fix memory leak when rmmod dax.ko

William Breathitt Gray <[email protected]>
counter: microchip-tcb-capture: Fix CMR value check

Nicolin Chen <[email protected]>
clk: tegra: Do not return 0 on failure

Terry Zhou <[email protected]>
clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9

Paul Cercueil <[email protected]>
clk: ingenic: Fix divider calculation with div tables

Yangtao Li <[email protected]>
pinctrl: sunxi: Always call chained_irq_{enter, exit} in sunxi_pinctrl_irq_handler

Zhao Heming <[email protected]>
md/cluster: fix deadlock when node is doing resync job

Zhao Heming <[email protected]>
md/cluster: block reshape with remote resync job

Jonathan Cameron <[email protected]>
iio:adc:ti-ads124s08: Fix alignment and data leak issues.

Jonathan Cameron <[email protected]>
iio:adc:ti-ads124s08: Fix buffer being too long.

Jonathan Cameron <[email protected]>
iio:imu:bmi160: Fix alignment and data leak issues

Jonathan Cameron <[email protected]>
iio:imu:bmi160: Fix too large a buffer.

Jonathan Cameron <[email protected]>
iio:pressure:mpl3115: Force alignment of buffer

Jonathan Cameron <[email protected]>
iio:magnetometer:mag3110: Fix alignment and data leak issues.

Jonathan Cameron <[email protected]>
iio:light:st_uvis25: Fix timestamp alignment and prevent data leak.

Jonathan Cameron <[email protected]>
iio:light:rpr0521: Fix timestamp alignment and prevent data leak.

Lorenzo Bianconi <[email protected]>
iio: imu: st_lsm6dsx: fix edge-trigger interrupts

Qinglang Miao <[email protected]>
iio: adc: rockchip_saradc: fix missing clk_disable_unprepare() on error in rockchip_saradc_resume

Nuno Sá <[email protected]>
iio: buffer: Fix demux update

Aleksa Sarai <[email protected]>
openat2: reject RESOLVE_BENEATH|RESOLVE_IN_ROOT

James Smart <[email protected]>
scsi: lpfc: Re-fix use after free in lpfc_rq_buf_free()

James Smart <[email protected]>
scsi: lpfc: Fix scheduling call while in softirq context in lpfc_unreg_rpi

James Smart <[email protected]>
scsi: lpfc: Fix invalid sleeping context in lpfc_sli4_nvmet_alloc()

Arun Easi <[email protected]>
scsi: qla2xxx: Fix crash during driver load on big endian machines

Sergei Antonov <[email protected]>
mtd: rawnand: meson: fix meson_nfc_dma_buffer_release() arguments

Praveenkumar I <[email protected]>
mtd: rawnand: qcom: Fix DMA sync on FLASH_STATUS register read

Richard Weinberger <[email protected]>
mtd: core: Fix refcounting for unpartitioned MTDs

Sven Eckelmann <[email protected]>
mtd: parser: cmdline: Fix parsing of part-names with colons

Miquel Raynal <[email protected]>
mtd: spinand: Fix OOB read

Evan Green <[email protected]>
soc: qcom: smp2p: Safely acquire spinlock without IRQs

Tudor Ambarus <[email protected]>
spi: atmel-quadspi: Fix AHB memory accesses

Lukas Wunner <[email protected]>
spi: atmel-quadspi: Disable clock in probe error path

Lukas Wunner <[email protected]>
spi: mt7621: Don't leak SPI master in probe error path

Lukas Wunner <[email protected]>
spi: mt7621: Disable clock in probe error path

Lukas Wunner <[email protected]>
spi: synquacer: Disable clock in probe error path

Lukas Wunner <[email protected]>
spi: st-ssc4: Fix unbalanced pm_runtime_disable() in probe error path

Lukas Wunner <[email protected]>
spi: spi-qcom-qspi: Fix use-after-free on unbind

Lukas Wunner <[email protected]>
spi: spi-geni-qcom: Fix use-after-free on unbind

Lukas Wunner <[email protected]>
spi: sc18is602: Don't leak SPI master in probe error path

Lukas Wunner <[email protected]>
spi: rpc-if: Fix use-after-free on unbind

Lukas Wunner <[email protected]>
spi: rb4xx: Don't leak SPI master in probe error path

Lukas Wunner <[email protected]>
spi: pic32: Don't leak DMA channels in probe error path

Lukas Wunner <[email protected]>
spi: npcm-fiu: Disable clock in probe error path

Lukas Wunner <[email protected]>
spi: mxic: Don't leak SPI master in probe error path

Lukas Wunner <[email protected]>
spi: gpio: Don't leak SPI master in probe error path

Rasmus Villemoes <[email protected]>
spi: fsl: fix use of spisel_boot signal on MPC8309

Lukas Wunner <[email protected]>
spi: davinci: Fix use-after-free on unbind

Lukas Wunner <[email protected]>
spi: ar934x: Don't leak SPI master in probe error path

Lukas Wunner <[email protected]>
spi: spi-mtk-nor: Don't leak SPI master in probe error path

Lukas Wunner <[email protected]>
spi: atmel-quadspi: Fix use-after-free on unbind

Lukas Wunner <[email protected]>
spi: spi-sh: Fix use-after-free on unbind

Lukas Wunner <[email protected]>
spi: pxa2xx: Fix use-after-free on unbind

Lars-Peter Clausen <[email protected]>
iio: ad_sigma_delta: Don't put SPI transfer buffer on the stack

Chris Wilson <[email protected]>
drm/i915: Fix mismatch between misplaced vma check and vma insert

Zwane Mwaikambo <[email protected]>
drm/dp_aux_dev: check aux_dev before use in drm_dp_aux_dev_get_by_minor()

Stylon Wang <[email protected]>
drm/amd/display: Fix memory leaks in S3 resume

Alex Deucher <[email protected]>
drm/amdgpu: only set DP subconnector type on DP and eDP connectors

Bas Nieuwenhuizen <[email protected]>
drm/amd/display: Honor the offset for plane 0.

Boris Brezillon <[email protected]>
drm/panfrost: Move the GPU reset bits outside the timeout handler

Boris Brezillon <[email protected]>
drm/panfrost: Fix job timeout handling

Dave Kleikamp <[email protected]>
jfs: Fix array index bounds check in dbAdjTree

Amir Goldstein <[email protected]>
fsnotify: fix events reported to watching parent and child

Amir Goldstein <[email protected]>
inotify: convert to handle_inode_event() interface

Amir Goldstein <[email protected]>
fsnotify: generalize handle_inode_event()

lizhe <[email protected]>
jffs2: Fix ignoring mounting options problem during remounting

Zhe Li <[email protected]>
jffs2: Fix GC exit abnormally

Richard Weinberger <[email protected]>
ubifs: wbuf: Don't leak kernel memory to flash

Steve French <[email protected]>
SMB3.1.1: do not log warning message if server doesn't populate salt

Steve French <[email protected]>
SMB3.1.1: remove confusing mount warning when no SPNEGO info on negprot rsp

Steve French <[email protected]>
SMB3: avoid confusing warning message on mount to Azure

Luis Henriques <[email protected]>
ceph: fix race in concurrent __ceph_remove_cap invocations

Johannes Berg <[email protected]>
um: Fix time-travel mode

Anton Ivanov <[email protected]>
um: Remove use of asprinf in umid.c

Roberto Sassu <[email protected]>
ima: Don't modify file descriptor mode on the fly

Miklos Szeredi <[email protected]>
ovl: make ioctl() safe

David Hildenbrand <[email protected]>
powerpc/powernv/memtrace: Fix crashing the kernel when enabling concurrently

David Hildenbrand <[email protected]>
powerpc/powernv/memtrace: Don't leak kernel memory to user space

Alexey Kardashevskiy <[email protected]>
powerpc/powernv/npu: Do not attempt NPU2 setup on POWER8NVL NPU

Christophe Leroy <[email protected]>
powerpc/mm: Fix verification of MMU_FTR_TYPE_44x

Christophe Leroy <[email protected]>
powerpc/8xx: Fix early debug when SMC1 is relocated

Christophe Leroy <[email protected]>
powerpc/xmon: Change printk() to pr_cont()

Christophe Leroy <[email protected]>
powerpc/feature: Add CPU_FTR_NOEXECUTE to G2_LE

Christophe Leroy <[email protected]>
powerpc/bitops: Fix possible undefined behaviour with fls() and fls64()

Tyrel Datwyler <[email protected]>
powerpc/rtas: Fix typo of ibm,open-errinjct in RTAS filter

Mathieu Desnoyers <[email protected]>
powerpc: Fix incorrect stw{, ux, u, x} instructions in __set_pte_at

Christophe Leroy <[email protected]>
powerpc/32: Fix vmap stack - Properly set r1 before activating MMU on syscall too

Chuck Lever <[email protected]>
xprtrdma: Fix XDRBUF_SPARSE_PAGES support

Jon Hunter <[email protected]>
ARM: tegra: Populate OPP table for Tegra20 Ventana

Nicolas Ferre <[email protected]>
ARM: dts: at91: sama5d2: fix CAN message ram offset and size

H. Nikolaus Schaller <[email protected]>
ARM: dts: pandaboard: fix pinmux for gpio user button of Pandaboard ES

Bjorn Andersson <[email protected]>
iommu/arm-smmu-qcom: Implement S2CR quirk

Bjorn Andersson <[email protected]>
iommu/arm-smmu-qcom: Read back stream mappings

Bjorn Andersson <[email protected]>
iommu/arm-smmu: Allow implementation specific write_s2cr

Tom Lendacky <[email protected]>
KVM: SVM: Remove the call to sev_platform_status() during setup

Paolo Bonzini <[email protected]>
KVM: x86: reinstate vendor-agnostic check on SPEC_CTRL cpuid bits

Marc Zyngier <[email protected]>
KVM: arm64: Introduce handling of AArch32 TTBCR2 traps

Tomasz Nowicki <[email protected]>
arm64: dts: marvell: keep SMMU disabled by default for Armada 7040 and 8040

Tomi Valkeinen <[email protected]>
arm64: dts: ti: k3-am65: mark dss as dma-coherent

Atish Patra <[email protected]>
RISC-V: Fix usage of memblock_enforce_memory_limit

Jan Kara <[email protected]>
ext4: don't remount read-only with errors=continue on reboot

Jan Kara <[email protected]>
ext4: fix deadlock with fs freezing and EA inodes

Chunguang Xu <[email protected]>
ext4: fix a memory leak of ext4_free_data

Dan Carpenter <[email protected]>
ext4: fix an IS_ERR() vs NULL check

Filipe Manana <[email protected]>
btrfs: fix race when defragmenting leads to unnecessary IO

Josef Bacik <[email protected]>
btrfs: update last_byte_to_unpin in switch_commit_roots

Josef Bacik <[email protected]>
btrfs: do not shorten unpin len for caching block groups

Johan Hovold <[email protected]>
USB: serial: keyspan_pda: fix write unthrottling

Johan Hovold <[email protected]>
USB: serial: keyspan_pda: fix tx-unthrottle use-after-free

Johan Hovold <[email protected]>
USB: serial: keyspan_pda: fix write-wakeup use-after-free

Johan Hovold <[email protected]>
USB: serial: keyspan_pda: fix stalled writes

Johan Hovold <[email protected]>
USB: serial: keyspan_pda: fix write deadlock

Johan Hovold <[email protected]>
USB: serial: keyspan_pda: fix dropped unthrottle interrupts

Johan Hovold <[email protected]>
USB: serial: digi_acceleport: fix write-wakeup deadlocks

Johan Hovold <[email protected]>
USB: serial: mos7720: fix parallel-port state restore

Jim Cromie <[email protected]>
dyndbg: fix use before null check

Daniel Jordan <[email protected]>
cpuset: fix race between hotplug work and later CPU offline

Borislav Petkov <[email protected]>
EDAC/amd64: Fix PCI component registration

Qiuxu Zhuo <[email protected]>
EDAC/i10nm: Use readl() to access MMIO registers

Ahmed S. Darwish <[email protected]>
Documentation: seqlock: s/LOCKTYPE/LOCKNAME/g

Finn Thain <[email protected]>
m68k: Fix WARNING splat in pmac_zilog driver

Ard Biesheuvel <[email protected]>
crypto: arm/aes-ce - work around Cortex-A57/A72 silion errata

Ard Biesheuvel <[email protected]>
crypto: ecdh - avoid unaligned accesses in ecdh_set_secret()

Rafael J. Wysocki <[email protected]>
cpufreq: intel_pstate: Use most recent guaranteed performance values

Athira Rajeev <[email protected]>
powerpc/perf: Exclude kernel samples while counting events in user space.

Kan Liang <[email protected]>
perf/x86/intel/lbr: Fix the return type of get_lbr_cycles()

Kan Liang <[email protected]>
perf/x86/intel: Fix rtm_abort_event encoding on Ice Lake

Kan Liang <[email protected]>
perf/x86/intel: Add event constraint for CYCLE_ACTIVITY.STALLS_MEM_ANY

Vitaly Wool <[email protected]>
z3fold: stricter locking and more careful reclaim

Vitaly Wool <[email protected]>
z3fold: simplify freeing slots

Ian Abbott <[email protected]>
staging: comedi: mf6x4: Fix AI end-of-conversion detection

Jaroslav Kysela <[email protected]>
ASoC: AMD Raven/Renoir - fix the PCI probe (PCI revision)

Jaroslav Kysela <[email protected]>
ASoC: AMD Renoir - add DMI table to avoid the ACP mic probe (broken BIOS)

Takashi Iwai <[email protected]>
ASoC: cx2072x: Fix doubly definitions of Playback and Capture streams

Todd Kjos <[email protected]>
binder: add flag to clear buffer on txn complete

Stefan Haberland <[email protected]>
s390/dasd: fix list corruption of lcu list

Stefan Haberland <[email protected]>
s390/dasd: fix list corruption of pavgroup group list

Stefan Haberland <[email protected]>
s390/dasd: prevent inconsistent LCU device data

Stefan Haberland <[email protected]>
s390/dasd: fix hanging device offline processing

Sven Schnelle <[email protected]>
s390/idle: fix accounting with machine checks

Sven Schnelle <[email protected]>
s390/idle: add missing mt_cycles calculation

Philipp Rudo <[email protected]>
s390/kexec_file: fix diag308 subcode when loading crash kernel

Sven Schnelle <[email protected]>
s390/smp: perform initial CPU reset also for SMT siblings

Robin Gong <[email protected]>
ALSA: core: memalloc: add page alignment for iram

Takashi Iwai <[email protected]>
ALSA: usb-audio: Add alias entry for ASUS PRIME TRX40 PRO-S

Takashi Iwai <[email protected]>
ALSA: usb-audio: Disable sample read check if firmware doesn't give back

Amadej Kastelic <[email protected]>
ALSA: usb-audio: Add VID to support native DSD reproduction on FiiO devices

Kailang Yang <[email protected]>
ALSA: hda/realtek - Supported Dell fixed type headset

Chris Chiu <[email protected]>
ALSA: hda/realtek: Remove dummy lineout on Acer TravelMate P648/P658

Chris Chiu <[email protected]>
ALSA: hda/realtek: Apply jack fixup for Quanta NL3

Takashi Iwai <[email protected]>
ALSA: hda/realtek: Add quirk for MSI-GP73

Chris Chiu <[email protected]>
ALSA/hda: apply jack fixup for the Acer Veriton N4640G/N6640G/N2510G

Takashi Iwai <[email protected]>
ALSA: pcm: oss: Fix a few more UBSAN fixes

Kailang Yang <[email protected]>
ALSA: hda/realtek - Add supported for more Lenovo ALC285 Headset Button

Chris Chiu <[email protected]>
ALSA: hda/realtek - Enable headset mic of ASUS Q524UQK with ALC255

Chris Chiu <[email protected]>
ALSA: hda/realtek - Enable headset mic of ASUS X430UN with ALC256

Hui Wang <[email protected]>
ALSA: hda/realtek: make bass spk volume adjustable on a yoga laptop

Connor McAdams <[email protected]>
ALSA: hda/ca0132 - Fix AE-5 rear headphone pincfg.

Takashi Iwai <[email protected]>
ALSA: hda: Fix regressions on clear and reconfig sysfs

Hui Wang <[email protected]>
ACPI: PNP: compare the string length in the matching_id()

Daniel Scally <[email protected]>
Revert "ACPI / resources: Use AE_CTRL_TERMINATE to terminate resources walks"

Rafael J. Wysocki <[email protected]>
PM: ACPI: PCI: Drop acpi_pm_set_bridge_wakeup()

Dan Williams <[email protected]>
ACPI: NFIT: Fix input validation of bus-family

Connor McAdams <[email protected]>
ALSA: hda/ca0132 - Change Input Source enum strings.

Arnd Bergmann <[email protected]>
Input: cyapa_gen6 - fix out-of-bounds stack access

Sakari Ailus <[email protected]>
media: ipu3-cio2: Make the field on subdev format V4L2_FIELD_NONE

Sakari Ailus <[email protected]>
media: ipu3-cio2: Validate mbus format in setting subdev format

Sakari Ailus <[email protected]>
media: ipu3-cio2: Serialise access to pad format

Sakari Ailus <[email protected]>
media: ipu3-cio2: Return actual subdev format

Sakari Ailus <[email protected]>
media: ipu3-cio2: Remove traces of returned buffers

Lukas Wunner <[email protected]>
media: netup_unidvb: Don't leak SPI master in probe error path

Sean Young <[email protected]>
media: sunxi-cir: ensure IR is handled when it is continuous

Jens Axboe <[email protected]>
io_uring: make ctx cancel on exit targeted to actual ctx

Pavel Begunkov <[email protected]>
io_uring: fix double io_uring free

Pavel Begunkov <[email protected]>
io_uring: fix ignoring xa_store errors

Xiaoguang Wang <[email protected]>
io_uring: hold uring_lock while completing failed polled io in io_wq_submit_work()

Pavel Begunkov <[email protected]>
io_uring: fix 0-iov read buffer select

Xiaoguang Wang <[email protected]>

    io_uring: fix io_wqe->work_list corruption

Alan Stern <[email protected]>
media: gspca: Fix memory leak in probe

Alexey Kardashevskiy <[email protected]>
vfio/pci/nvlink2: Do not attempt NPU2 setup on POWER8NVL NPU

Eric Auger <[email protected]>
vfio/pci: Move dummy_resources_list init in vfio_pci_probe()

Xiaoguang Wang <[email protected]>
io_uring: always let io_iopoll_complete() complete polled io

Pavel Begunkov <[email protected]>
io_uring: fix racy IOPOLL completions

Pavel Begunkov <[email protected]>
io_uring: fix io_cqring_events()'s noflush

Linus Torvalds <[email protected]>
proc mountinfo: make splice available again

Casey Schaufler <[email protected]>
Smack: Handle io_uring kernel thread privileges

Pavel Begunkov <[email protected]>
io_uring: cancel reqs shouldn't kill overflow list

Pavel Begunkov <[email protected]>
io_uring: fix racy IOPOLL flush overflow

Arnaldo Carvalho de Melo <[email protected]>
perf probe: Fix memory leak when synthesizing SDT probes

Geert Uytterhoeven <[email protected]>
ARM: 9036/1: uncompress: Fix dbgadtb size parameter name

Ard Biesheuvel <[email protected]>
ARM: 9044/1: vfp: use undef hook for VFP support detection

Cédric Le Goater <[email protected]>
powerpc/smp: Add __init to init_big_cores()

Michael Ellerman <[email protected]>
powerpc/boot: Fix build of dts/fsl

Masahiro Yamada <[email protected]>
kconfig: fix return value of do_error_if()

Geert Uytterhoeven <[email protected]>
clk: vc5: Use "idt,voltage-microvolt" instead of "idt,voltage-microvolts"

Jernej Skrabec <[email protected]>
clk: sunxi-ng: Make sure divider tables have sentinel

Christophe JAILLET <[email protected]>
clk: s2mps11: Fix a resource leak in error handling paths in the probe function

Alexandre Belloni <[email protected]>
clk: at91: sam9x60: remove atmel,osc-bypass support

Claudiu Beznea <[email protected]>
clk: at91: sama7g5: fix compilation error

Nicolas Saenz Julienne <[email protected]>
clk: bcm: dvp: Add MODULE_DEVICE_TABLE()

Soheil Hassas Yeganeh <[email protected]>
epoll: check for events when removing a timed out thread from the wait queue

Zhang Changzhong <[email protected]>
vhost scsi: fix error return code in vhost_scsi_set_endpoint()

Dan Carpenter <[email protected]>
virtio_ring: Fix two use after free bugs

Dan Carpenter <[email protected]>
virtio_net: Fix error code in probe()

Dan Carpenter <[email protected]>
virtio_ring: Cut and paste bugs in vring_create_virtqueue_packed()

Eli Cohen <[email protected]>
vdpa/mlx5: Use write memory barrier after updating CQ index

Simon Horman <[email protected]>
nfp: move indirect block cleanup to flower app stop callback

Dan Carpenter <[email protected]>
qlcnic: Fix error code in probe

Zheng Zengkai <[email protected]>
perf record: Fix memory leak when using '--user-regs=?' to list registers

Jiri Olsa <[email protected]>
tools build: Add missing libcap to test-all.bin target

Pavel Begunkov <[email protected]>
io_uring: cancel only requests of current task

Thierry Reding <[email protected]>
pwm: sun4i: Remove erroneous else branch

Uwe Kleine-König <[email protected]>
pwm: imx27: Fix overflow for bigger periods

Lokesh Vutla <[email protected]>
pwm: lp3943: Dynamically allocate PWM chip base

Uwe Kleine-König <[email protected]>
pwm: zx: Add missing cleanup in error path

Zhang Qilong <[email protected]>
clk: ti: Fix memleak in ti_fapll_synth_setup

Arnd Bergmann <[email protected]>
watchdog: coh901327: add COMMON_CLK dependency

Manivannan Sadhasivam <[email protected]>
watchdog: qcom: Avoid context switch in restart handler

Michael Ellerman <[email protected]>
powerpc/32s: Fix cleanup_cpu_mmu_context() compile bug

Zhang Qilong <[email protected]>
libnvdimm/label: Return -ENXIO for no slot in __blk_label_update

Tobias Klauser <[email protected]>
devlink: use _BITUL() macro instead of BIT() in the UAPI header

Vincent Stehlé <[email protected]>
net: korina: fix return value

Trond Myklebust <[email protected]>
NFS/pNFS: Fix a typo in ff_layout_resend_pnfs_read()

Jack Wang <[email protected]>
block/rnbd-clt: Fix possible memleak

Md Haris Iqbal <[email protected]>
block/rnbd-clt: Get rid of warning regarding size argument in strlcpy

Christophe JAILLET <[email protected]>
net: allwinner: Fix some resources leak in the error handling path of the probe and in the remove function

Christophe JAILLET <[email protected]>
net: mscc: ocelot: Fix a resource leak in the error handling path of the probe function

Christophe JAILLET <[email protected]>
net: bcmgenet: Fix a resource leak in an error handling path in the probe functin

Ioana Ciornei <[email protected]>
dpaa2-eth: fix the size of the mapped SGT buffer

Oleksij Rempel <[email protected]>
net: dsa: qca: ar9331: fix sleeping function called from invalid context bug

Björn Töpel <[email protected]>
i40e, xsk: clear the status bits for the next_to_use descriptor

Björn Töpel <[email protected]>
ice, xsk: clear the status bits for the next_to_use descriptor

Sven Van Asbroeck <[email protected]>
lan743x: fix rx_napi_poll/interrupt ping-pong

Heiko Carstens <[email protected]>
s390/test_unwind: fix CALL_ON_STACK tests

Dwaipayan Ray <[email protected]>
checkpatch: fix unescaped left brace

Alexey Dobriyan <[email protected]>
proc: fix lookup in /proc/net subdirectories after setns(2)

Johannes Weiner <[email protected]>
mm: don't wake kswapd prematurely when watermark boosting is disabled

Dan Carpenter <[email protected]>
hugetlb: fix an error code in hugetlb_reserve_pages()

Oscar Salvador <[email protected]>
mm,memory_failure: always pin the page in madvise_inject_error

Vincenzo Frascino <[email protected]>
mm/vmalloc.c: fix kasan shadow poisoning size

Waiman Long <[email protected]>
mm/vmalloc: Fix unlock order in s_stop()

Matthew Wilcox (Oracle) <[email protected]>
sparc: fix handling of page table constructor failure

Shakeel Butt <[email protected]>
mm/rmap: always do TTU_IGNORE_ACCESS

Muchun Song <[email protected]>
mm: memcg/slab: fix use after free in obj_cgroup_charge

Muchun Song <[email protected]>
mm: memcg/slab: fix return of child memcg objcg for root memcg

Jason Gunthorpe <[email protected]>
mm/gup: combine put_compound_head() and unpin_user_page()

Jason Gunthorpe <[email protected]>
mm/gup: prevent gup_fast from racing with COW during fork

Jason Gunthorpe <[email protected]>
mm/gup: reorganize internal_get_user_pages_fast()

Alex Deucher <[email protected]>
drm/amdgpu: fix regression in vbios reservation handling on headless

Kajol Jain <[email protected]>
perf test: Fix metric parsing test

Vincent Stehlé <[email protected]>
powerpc/ps3: use dma_mapping_error()

Madhavan Srinivasan <[email protected]>
powerpc/perf: Fix Threshold Event Counter Multiplier width for P10

Guido Günther <[email protected]>
drm: mxsfb: Silence -EPROBE_DEFER while waiting for bridge

Bongsu Jeon <[email protected]>
nfc: s3fwrn5: Release the nfc firmware

Leon Romanovsky <[email protected]>
RDMA/cma: Don't overwrite sgid_attr after device is released

Maor Gottlieb <[email protected]>
RDMA/mlx5: Fix MR cache memory leak

Dan Aloni <[email protected]>
sunrpc: fix xs_read_xdr_buf for partial pages receive

Anton Ivanov <[email protected]>
um: chan_xterm: Fix fd leak

Anton Ivanov <[email protected]>
um: tty: Fix handling of close in tty lines

Anton Ivanov <[email protected]>
um: Monitor error events in IRQ controller

Wang ShaoBo <[email protected]>
ubifs: Fix error return code in ubifs_init_authentication()

Wang Wensheng <[email protected]>
watchdog: Fix potential dereferencing of null pointer

Lingling Xu <[email protected]>
watchdog: sprd: check busy bit before new loading rather than after that

Lingling Xu <[email protected]>
watchdog: sprd: remove watchdog disable from resume fail path

Guenter Roeck <[email protected]>
watchdog: sirfsoc: Add missing dependency on HAS_IOMEM

Guenter Roeck <[email protected]>
watchdog: armada_37xx: Add missing dependency on HAS_IOMEM

Douglas Anderson <[email protected]>
irqchip/qcom-pdc: Fix phantom irq when changing between rising/falling

Pradeep Kumar Chitrapu <[email protected]>
ath11k: Fix incorrect tlvs in scan start command

Nikita Shubin <[email protected]>
gpiolib: irq hooks: fix recursion in gpiochip_irq_unmask

Weihang Li <[email protected]>
RDMA/hns: Do shift on traffic class when using RoCEv2

Wenpeng Liang <[email protected]>
RDMA/hns: Normalization the judgment of some features

Wenpeng Liang <[email protected]>
RDMA/hns: Limit the length of data copied between kernel and userspace

Peter Ujfalusi <[email protected]>
dmaengine: ti: k3-udma: Correct normal channel offset when uchan_cnt is not 0

Lokesh Vutla <[email protected]>
irqchip/ti-sci-intr: Fix freeing of irqs

Lokesh Vutla <[email protected]>
irqchip/ti-sci-inta: Fix printing of inta id on probe success

Marc Zyngier <[email protected]>
irqchip/alpine-msi: Fix freeing of interrupts on allocation error path

Dan Carpenter <[email protected]>
ASoC: wm_adsp: remove "ctl" from list on error in wm_adsp_create_control()

Wen Gong <[email protected]>
mac80211: fix a mistake check for rx_stats update

Johannes Berg <[email protected]>
mac80211: don't set set TDLS STA bandwidth wider than possible

Arnd Bergmann <[email protected]>
crypto: atmel-i2c - select CONFIG_BITREVERSE

Marek Szyprowski <[email protected]>
extcon: max77693: Fix modalias string

Hao Li <[email protected]>
fs: Handle I_DONTCACHE in iput_final() instead of generic_drop_inode()

Magnus Karlsson <[email protected]>
samples/bpf: Fix possible hang in xdpsock with multiple threads

Han Xu <[email protected]>
mtd: rawnand: gpmi: Fix the random DMA timeout issue

Dan Carpenter <[email protected]>
mtd: rawnand: meson: Fix a resource leak in init

Zhang Qilong <[email protected]>
mtd: rawnand: gpmi: fix reference count leak in gpmi ops

Dmitry Osipenko <[email protected]>
clk: tegra: Fix duplicated SE clock entry

Douglas Anderson <[email protected]>
clk: qcom: gcc-sc7180: Use floor ops for sdcc clks

Tzung-Bi Shih <[email protected]>
remoteproc/mediatek: unprepare clk if scp_before_load fails

Zhang Changzhong <[email protected]>
remoteproc: qcom: Fix potential NULL dereference in adsp_init_mmio()

YueHaibing <[email protected]>
remoteproc: k3-dsp: Fix return value check in k3_dsp_rproc_of_get_memories()

Zhang Qilong <[email protected]>
remoteproc: qcom: pas: fix error handling in adsp_pds_enable

Zhang Qilong <[email protected]>
remoteproc: qcom: fix reference leak in adsp_start

Zhang Qilong <[email protected]>
remoteproc: q6v5-mss: fix error handling in q6v5_pds_enable

Alexandre Courbot <[email protected]>
remoteproc/mtk_scp: surround DT device IDs with CONFIG_OF

Tzung-Bi Shih <[email protected]>
remoteproc/mediatek: change MT8192 CFG register base

Avihai Horon <[email protected]>
RDMA/uverbs: Fix incorrect variable type

Jack Morgenstein <[email protected]>
RDMA/core: Do not indicate device ready when device enablement fails

Kai Vehmanen <[email protected]>
ALSA: hda/hdmi: fix silent stream for first playback to DP

Zhang Changzhong <[email protected]>
slimbus: qcom: fix potential NULL dereference in qcom_slim_prg_slew()

Ravi Bangoria <[email protected]>
powerpc/sstep: Cover new VSX instructions under CONFIG_VSX

Balamuruhan S <[email protected]>
powerpc/sstep: Emulate prefixed instructions only when CPU_FTR_ARCH_31 is set

Sean Nyekjaer <[email protected]>
can: m_can: m_can_config_endisable(): remove double clearing of clock stop request bit

Geert Uytterhoeven <[email protected]>
clk: renesas: r8a779a0: Fix R and OSC clocks

Huang Jianan <[email protected]>
erofs: avoid using generic_block_bmap

Johannes Berg <[email protected]>
iwlwifi: mvm: hook up missing RX handlers

Johannes Berg <[email protected]>
iwlwifi: dbg-tlv: fix old length in is_trig_data_contained()

Qinglang Miao <[email protected]>
s390/cio: fix use-after-free in ccw_device_destroy_console

Eddie James <[email protected]>
fsi: Aspeed: Add mutex to protect HW access

Zhang Changzhong <[email protected]>
bus: fsl-mc: fix error return code in fsl_mc_object_allocate()

Laurentiu Tudor <[email protected]>
bus: fsl-mc: add back accidentally dropped error check

Xiongfeng Wang <[email protected]>
misc: pci_endpoint_test: fix return value of error branch

Stephen Boyd <[email protected]>
platform/chrome: cros_ec_spi: Don't overwrite spi::mode

Quinn Tran <[email protected]>
scsi: qla2xxx: Fix N2N and NVMe connect retry failure

Arun Easi <[email protected]>
scsi: qla2xxx: Fix FW initialization error on big endian machines

Masami Hiramatsu <[email protected]>
x86/kprobes: Restore BTF if the single-stepping is cancelled

Cheng Lin <[email protected]>
nfs_common: need lock during iterate through the list

Dai Ngo <[email protected]>
NFSD: Fix 5 seconds delay when doing inter server copy

kazuo ito <[email protected]>
nfsd: Fix message level for normal termination

Yang Yingliang <[email protected]>
speakup: fix uninitialized flush_lock

Zhang Qilong <[email protected]>
usb: oxu210hp-hcd: Fix memory leak in oxu_create

Zhang Qilong <[email protected]>
usb: ehci-omap: Fix PM disable depth umbalance in ehci_hcd_omap_probe

Christophe Leroy <[email protected]>
powerpc/mm: sanity_check_fault() should work for all, not only BOOK3S

Dan Carpenter <[email protected]>

    ASoC: max98390: Fix error codes in max98390_dsm_init()

Arnd Bergmann <[email protected]>
coresight: remove broken __exit annotations

Chuhong Yuan <[email protected]>
ASoC: amd: change clk_get() to devm_clk_get() and add missed checks

Colin Ian King <[email protected]>
drm/mediatek: avoid dereferencing a null hdmi_phy on an error message

Christophe Leroy <[email protected]>
powerpc/powermac: Fix low_sleep_handler with CONFIG_VMAP_STACK

Nathan Lynch <[email protected]>
powerpc/pseries/hibernation: remove redundant cacheinfo update

Nathan Lynch <[email protected]>
powerpc/pseries/hibernation: drop pseries_suspend_begin() from suspend ops

Ard Biesheuvel <[email protected]>
ARM: 9030/1: entry: omit FP emulation for UND exceptions taken in kernel mode

Vadim Pasternak <[email protected]>
platform/x86: mlx-platform: Fix item counter assignment for MSN2700/ComEx system

Vadim Pasternak <[email protected]>
platform/x86: mlx-platform: Fix item counter assignment for MSN2700, MSN24xx systems

Zhang Changzhong <[email protected]>
scsi: fnic: Fix error return code in fnic_probe()

Arnd Bergmann <[email protected]>
seq_buf: Avoid type mismatch for seq_buf_init

Qinglang Miao <[email protected]>
scsi: iscsi: Fix inappropriate use of put_device()

Zhang Qilong <[email protected]>

    scsi: pm80xx: Fix error return in pm8001_pci_probe()

Qinglang Miao <[email protected]>
scsi: qedi: Fix missing destroy_workqueue() on error in __qedi_probe

Michael Walle <[email protected]>
clk: fsl-sai: fix memory leak

Stefan Agner <[email protected]>
arm64: dts: meson: g12b: w400: fix PHY deassert timing requirements

Stefan Agner <[email protected]>
arm64: dts: meson: g12a: x96-max: fix PHY deassert timing requirements

Stefan Agner <[email protected]>
ARM: dts: meson: fix PHY deassert timing requirements

Stefan Agner <[email protected]>
arm64: dts: meson: fix PHY deassert timing requirements

Stefan Agner <[email protected]>
arm64: dts: meson: g12b: odroid-n2: fix PHY deassert timing requirements

Michael Walle <[email protected]>

    mtd: spi-nor: atmel: fix unlock_all() for AT25FS010/040

Michael Walle <[email protected]>
mtd: spi-nor: atmel: remove global protection flag

Michael Walle <[email protected]>
mtd: spi-nor: ignore errors in spi_nor_unlock_all()

Michael Walle <[email protected]>
mtd: spi-nor: sst: fix BPn bits for the SST25VF064C

Zhang Changzhong <[email protected]>
adm8211: fix error return code in adm8211_probe()

Hans de Goede <[email protected]>
platform/x86: intel-vbtn: Fix SW_TABLET_MODE always reporting 1 on some HP x360 models

Hans de Goede <[email protected]>

    Bluetooth: btusb: Fix detection of some fake CSR controllers with a bcdDevice val of 0x0134

Colin Ian King <[email protected]>

    block/rnbd: fix a null pointer dereference on dev->blk_symlink_name

Md Haris Iqbal <[email protected]>
block/rnbd-clt: Dynamically alloc buffer for pathname & blk_symlink_name

Wei Yongjun <[email protected]>
Bluetooth: sco: Fix crash when using BT_SNDMTU/BT_RCVMTU option

Jing Xiangfeng <[email protected]>
Bluetooth: btmtksdio: Add the missed release_firmware() in mtk_setup_firmware()

Jing Xiangfeng <[email protected]>
Bluetooth: btusb: Add the missed release_firmware() in btusb_mtk_setup_firmware()

Zhang Changzhong <[email protected]>
spi: dw: Fix error return code in dw_spi_bt1_probe()

Wang Hai <[email protected]>
staging: greybus: audio: Fix possible leak free widgets in gbaudio_dapm_free_controls

Arnd Bergmann <[email protected]>
staging: bcm2835: fix vchiq_mmal dependencies

Finn Thain <[email protected]>
macintosh/adb-iop: Send correct poll command

Finn Thain <[email protected]>
macintosh/adb-iop: Always wait for reply message from IOP

Arnd Bergmann <[email protected]>
cpufreq: imx: fix NVMEM_IMX_OCOTP dependency

Pali Rohár <[email protected]>
cpufreq: vexpress-spc: Add missing MODULE_ALIAS

Pali Rohár <[email protected]>
cpufreq: scpi: Add missing MODULE_ALIAS

Pali Rohár <[email protected]>
cpufreq: loongson1: Add missing MODULE_ALIAS

Pali Rohár <[email protected]>
cpufreq: sun50i: Add missing MODULE_DEVICE_TABLE

Pali Rohár <[email protected]>
cpufreq: st: Add missing MODULE_DEVICE_TABLE

Pali Rohár <[email protected]>
cpufreq: qcom: Add missing MODULE_DEVICE_TABLE

Pali Rohár <[email protected]>
cpufreq: mediatek: Add missing MODULE_DEVICE_TABLE

Pali Rohár <[email protected]>
cpufreq: highbank: Add missing MODULE_DEVICE_TABLE

Pali Rohár <[email protected]>
cpufreq: ap806: Add missing MODULE_DEVICE_TABLE

Keqian Zhu <[email protected]>
clocksource/drivers/arm_arch_timer: Correct fault programming of CNTKCTL_EL1.EVNTI

Keqian Zhu <[email protected]>
clocksource/drivers/arm_arch_timer: Use stable count reader in erratum sne

Arnd Bergmann <[email protected]>
drm/msm: add IOMMU_SUPPORT dependency

Marijn Suijten <[email protected]>
drm/msm: a5xx: Make preemption reset case reentrant

Zhang Changzhong <[email protected]>
memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe()

Arnd Bergmann <[email protected]>
memory: ti-emif-sram: only build for ARMv7

Wang Li <[email protected]>
phy: renesas: rcar-gen3-usb2: disable runtime pm in case of failure

Arnd Bergmann <[email protected]>
phy: mediatek: allow compile-testing the hdmi phy

Arnd Bergmann <[email protected]>
ASoC: qcom: fix QDSP6 dependencies, attempt #3

Arnd Bergmann <[email protected]>
ASoC: atmel: mchp-spdifrx needs COMMON_CLK

Arnd Bergmann <[email protected]>
ASoC: cros_ec_codec: fix uninitialized memory read

Qinglang Miao <[email protected]>
dm ioctl: fix error return code in target_message

Srinivas Kandagatla <[email protected]>
ASoC: q6afe-clocks: Add missing parent clock rate

Chuhong Yuan <[email protected]>
ASoC: jz4740-i2s: add missed checks for clk_get()

Lorenzo Bianconi <[email protected]>
mt76: fix tkip configuration for mt7615/7663 devices

Lorenzo Bianconi <[email protected]>
mt76: fix memory leak if device probing fails

Leon Romanovsky <[email protected]>
net/mlx5: Properly convey driver version to firmware

Lorenzo Bianconi <[email protected]>
mt76: dma: fix possible deadlock running mt76_dma_cleanup

Taehee Yoo <[email protected]>
mt76: set fops_tx_stats.owner to THIS_MODULE

Taehee Yoo <[email protected]>
mt76: mt7915: set fops_sta_stats.owner to THIS_MODULE

Lorenzo Bianconi <[email protected]>
mt76: mt7663s: fix a possible ple quota underflow

Alexander Sverdlin <[email protected]>
MIPS: Don't round up kernel sections size for memblock_add()

Jing Xiangfeng <[email protected]>
memstick: r592: Fix error return in r592_probe()

Chen-Yu Tsai <[email protected]>
arm64: dts: rockchip: Fix UART pull-ups on rk3328

Zhang Changzhong <[email protected]>
soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe()

Yu Kuai <[email protected]>
pinctrl: falcon: add missing put_device() call in pinctrl_falcon_probe()

Andrii Nakryiko <[email protected]>
selftests/bpf: Fix invalid use of strncat in test_sockmap

Andrii Nakryiko <[email protected]>
bpf: Fix bpf_put_raw_tracepoint()'s use of __module_address()

Mauro Carvalho Chehab <[email protected]>
scripts: kernel-doc: fix parsing function-like typedefs

Claudiu Beznea <[email protected]>
ARM: dts: at91: sama5d2: map securam as device

Claudiu Beznea <[email protected]>
ARM: dts: at91: sam9x60ek: remove bypass property

Toke Høiland-Jørgensen <[email protected]>
libbpf: Sanitise map names before pinning

Lars-Peter Clausen <[email protected]>
iio: hrtimer-trigger: Mark hrtimer to expire in hard interrupt context

Peter Collingbourne <[email protected]>
arm64: mte: fix prctl(PR_GET_TAGGED_ADDR_CTRL) if TCF0=NONE

Kefeng Wang <[email protected]>
clocksource/drivers/riscv: Make RISCV_TIMER depends on RISCV_SBI

Daniel Lezcano <[email protected]>
clocksource/drivers/ingenic: Fix section mismatch

Yu Kuai <[email protected]>
clocksource/drivers/cadence_ttc: Fix memory leak in ttc_setup_clockevent()

Yang Yingliang <[email protected]>
clocksource/drivers/orion: Add missing clk_disable_unprepare() on error path

Athira Rajeev <[email protected]>
powerpc/perf: Fix the PMU group constraints for threshold events in power10

Athira Rajeev <[email protected]>
powerpc/perf: Update the PMU group constraints for l2l3 events in power10

Athira Rajeev <[email protected]>
powerpc/perf: Fix to update radix_scope_qual in power10

Ravi Bangoria <[email protected]>
powerpc/xmon: Fix build failure for 8xx

Jordan Niethe <[email protected]>
powerpc/64: Fix an EMIT_BUG_ENTRY in head_64.S

Athira Rajeev <[email protected]>
powerpc/perf: Fix crash with is_sier_available when pmu is not set

Dan Carpenter <[email protected]>
media: saa7146: fix array overflow in vidioc_s_audio()

Zhang Xiaoxu <[email protected]>
media: tvp5150: Fix wrong return value of tvp5150_parse_dt()

Hyeongseok Kim <[email protected]>
f2fs: fix double free of unicode map

Zhang Qilong <[email protected]>
hwmon: (ina3221) Fix PM usage counter unbalance in ina3221_write_enable

Jason Gunthorpe <[email protected]>
vfio-pci: Use io_remap_pfn_range() for PCI IO memory

Mickaël Salaün <[email protected]>
selftests/seccomp: Update kernel config

NeilBrown <[email protected]>
NFS: switch nfsiod to be an UNBOUND workqueue.

Calum Mackay <[email protected]>
lockd: don't use interval-based rebinding over TCP

Fedor Tokarev <[email protected]>
net: sunrpc: Fix 'snprintf' return value check in 'do_xprt_debugfs'

Trond Myklebust <[email protected]>
NFSv4: Fix the alignment of page data in the getdeviceinfo reply

Trond Myklebust <[email protected]>
SUNRPC: xprt_load_transport() needs to support the netid "rdma6"

Olga Kornievskaia <[email protected]>
NFSv4.2: condition READDIR's mask for security label based on LSM state

Trond Myklebust <[email protected]>
SUNRPC: rpc_wake_up() should wake up tasks in the correct order

Christophe JAILLET <[email protected]>
ath10k: Release some resources in an error handling path

Christophe JAILLET <[email protected]>
ath10k: Fix an error handling path

Rakesh Pillai <[email protected]>
ath10k: Fix the parsing error in service available event

Christophe JAILLET <[email protected]>
ath11k: Fix an error handling path

Sven Eckelmann <[email protected]>
ath11k: Reset ath11k_skb_cb before setting new flags

Sven Eckelmann <[email protected]>

    ath11k: Don't cast ath11k_skb_cb to ieee80211_tx_info.control

Hans Verkuil <[email protected]>
media: i2c: imx219: Selection compliance fixes

Jacopo Mondi <[email protected]>
media: rdacm20: Enable GPIO1 explicitly

Jacopo Mondi <[email protected]>
media: max9271: Fix GPIO enable/disable

Sathyanarayana Nujella <[email protected]>
ASoC: Intel: Boards: tgl_max98373: update TDM slot_width

Qinglang Miao <[email protected]>
platform/x86: dell-smbios-base: Fix error return code in dell_smbios_init

Pierre-Louis Bossart <[email protected]>
soundwire: master: use pm_runtime_set_active() on add

Sudeep Holla <[email protected]>
mailbox: arm_mhu_db: Fix mhu_db_shutdown by replacing kfree with devm_kfree

Yangyang Li <[email protected]>
RDMA/hns: Bugfix for calculation of extended sge

Lang Cheng <[email protected]>
RDMA/hns: Fix 0-length sge calculation error

Alexandre Belloni <[email protected]>
ARM: dts: at91: at91sam9rl: fix ADC triggers

Maxim Kochetkov <[email protected]>
spi: spi-fsl-dspi: Use max_native_cs instead of num_chipselect to set SPI_MCR

Ahmed S. Darwish <[email protected]>

    scsi: pm80xx: Do not sleep in atomic context

Xiang Chen <[email protected]>
scsi: hisi_sas: Fix up probe error handling for v3 hw

Yu Kuai <[email protected]>
soc: amlogic: canvas: add missing put_device() call in meson_canvas_get()

Dongjin Kim <[email protected]>
arm64: dts: meson-sm1: fix typo in opp table

Artem Lapkin <[email protected]>
arm64: dts: meson: fix spi-max-frequency on Khadas VIM2

Roman Bacik <[email protected]>
PCI: iproc: Invalidate correct PAXB inbound windows

Bharat Gooty <[email protected]>
PCI: iproc: Fix out-of-bound array accesses

Colin Ian King <[email protected]>
PCI: Fix overflow in command-line resource alignment requests

Bjorn Helgaas <[email protected]>
PCI: Bounds-check command-line resource alignment requests

Bjorn Andersson <[email protected]>
arm64: dts: qcom: c630: Fix pinctrl pins properties

Bjorn Andersson <[email protected]>
arm64: dts: qcom: c630: Polish i2c-hid devices

JC Kuo <[email protected]>
phy: tegra: xusb: Fix usb_phy device driver field

Michael Walle <[email protected]>
arm64: dts: freescale: sl28: combine SPI MTD partitions

Michael Walle <[email protected]>
arm64: dts: ls1028a: fix FlexSPI clock input

Michael Walle <[email protected]>
arm64: dts: ls1028a: fix ENETC PTP clock input

Marc Zyngier <[email protected]>
genirq/irqdomain: Don't try to free an interrupt that has no mapping

Zhang Qilong <[email protected]>
power: supply: bq24190_charger: fix reference leak

Hans de Goede <[email protected]>
power: supply: axp288_charger: Fix HP Pavilion x2 10 DMI matching

Sebastian Krzyszkowiak <[email protected]>
power: supply: max17042_battery: Fix current_{avg,now} hiding with no current sense

Chen-Yu Tsai <[email protected]>
arm64: dts: rockchip: Set dr_mode to "host" for OTG on rk3328-roc-cc

Sebastian Krzyszkowiak <[email protected]>
power: supply: bq25890: Use the correct range for IILIM register

Marek Behún <[email protected]>
arm64: dts: armada-3720-turris-mox: update ethernet-phy handle name

Chris Packham <[email protected]>
ARM: dts: Remove non-existent i2c1 from 98dx3236

Jing Xiangfeng <[email protected]>
HSI: omap_ssi: Don't jump to free ID in ssi_add_controller()

Enric Balletbo i Serra <[email protected]>
drm/mediatek: Use correct aliases name for ovl

Leon Romanovsky <[email protected]>
RDMA/core: Track device memory MRs

Bjorn Andersson <[email protected]>
slimbus: qcom-ngd-ctrl: Avoid sending power requests without QMI

Dan Carpenter <[email protected]>

    media: max2175: fix max2175_set_csm_mode() error code

Qinglang Miao <[email protected]>
mips: cdmm: fix use-after-free in mips_cdmm_bus_discover

Daniel Gomez <[email protected]>
media: imx214: Fix stop streaming

Daniel T. Lee <[email protected]>
samples: bpf: Fix lwt_len_hist reusing previous BPF map

Zhang Qilong <[email protected]>
serial: 8250-mtk: Fix reference leak in mtk8250_probe

Weihang Li <[email protected]>
RDMA/hns: Avoid setting loopback indicator when smac is same as dmac

Weihang Li <[email protected]>
RDMA/hns: Fix missing fields in address vector

Weihang Li <[email protected]>
RDMA/hns: Only record vlan info for HIP08

Alex Elder <[email protected]>
arm64: dts: qcom: sc7180: limit IPA iommu streams

Vadim Pasternak <[email protected]>
platform/x86: mlx-platform: Remove PSU EEPROM from MSN274x platform configuration

Vadim Pasternak <[email protected]>
platform/x86: mlx-platform: Remove PSU EEPROM from default platform configuration

Keita Suzuki <[email protected]>
media: siano: fix memory leak of debugfs members in smsdvb_hotplug

Laurentiu Palcu <[email protected]>
drm/imx/dcss: fix rotations for Vivante tiled formats

Vinod Koul <[email protected]>
soundwire: qcom: Fix build failure when slimbus is module

Jason Gunthorpe <[email protected]>
RDMA/cma: Fix deadlock on &lock in rdma_cma_listen_on_all() error unwind

Vidya Sagar <[email protected]>
arm64: tegra: Fix DT binding for IO High Voltage entry

Marek Behún <[email protected]>
leds: turris-omnia: check for LED_COLOR_ID_RGB instead LED_COLOR_ID_MULTI

Christophe JAILLET <[email protected]>

    leds: lp50xx: Fix an error handling path in 'lp50xx_probe_dt()'

Yu Kuai <[email protected]>
leds: netxbig: add missing put_device() call in netxbig_leds_get_of_pdata()

Bjorn Andersson <[email protected]>
arm64: dts: qcom: sdm845: Limit ipa iommu streams

Zhihao Cheng <[email protected]>
dmaengine: mv_xor_v2: Fix error return code in mv_xor_v2_probe()

Qinglang Miao <[email protected]>
cw1200: fix missing destroy_workqueue() on error in cw1200_init_common

Zhang Changzhong <[email protected]>
rsi: fix error return code in rsi_reset_card()

Wang Hai <[email protected]>
qtnfmac: fix error return code in qtnf_pcie_probe()

Sebastian Andrzej Siewior <[email protected]>
orinoco: Move context allocation after processing the skb

Zhang Changzhong <[email protected]>
brcmfmac: fix error return code in brcmf_cfg80211_connect()

Zhihao Cheng <[email protected]>
mmc: pxamci: Fix error return code in pxamci_probe

Cristian Birsan <[email protected]>
ARM: dts: at91: sama5d3_xplained: add pincontrol for USB Host

Cristian Birsan <[email protected]>
ARM: dts: at91: sama5d4_xplained: add pincontrol for USB Host

Cristian Birsan <[email protected]>
ARM: dts: at91: sam9x60: add pincontrol for USB Host

Qinglang Miao <[email protected]>
memstick: fix a double-free bug in memstick_check

Yangtao Li <[email protected]>
pinctrl: sunxi: fix irq bank map for the Allwinner A100 pin controller

Srinivas Kandagatla <[email protected]>
soundwire: Fix DEBUG_LOCKS_WARN_ON for uninitialized attribute

Kamal Heib <[email protected]>
RDMA/cxgb4: Validate the number of CQEs

Maharaja Kennadyrajan <[email protected]>
ath11k: Fix the rx_filter flag setting for peer rssi stats

Wang Hai <[email protected]>
staging: mfd: hi6421-spmi-pmic: fix error return code in hi6421_spmi_pmic_probe()

Kevin Hilman <[email protected]>
clk: meson: Kconfig: fix dependency for G12A

Zhang Qilong <[email protected]>
Input: omap4-keypad - fix runtime PM error handling

Nikita Travkin <[email protected]>

    arm64: dts: qcom: msm8916-samsung-a2015: Disable muic i2c pin bias

Dmitry Baryshkov <[email protected]>

    arm64: dts: qcom: sm8250: correct compatible for sm8250-mtp

Tom Rix <[email protected]>
soc: qcom: initialize local variable

Zhihao Cheng <[email protected]>
drivers: soc: ti: knav_qmss_queue: Fix error return code in knav_queue_probe

Zhang Qilong <[email protected]>
soc: ti: Fix reference imbalance in knav_dma_probe

Zhang Qilong <[email protected]>
soc: ti: knav_qmss: fix reference leak in knav_queue_probe

Jim Quinlan <[email protected]>
PCI: brcmstb: Initialize "tmp" before use

Andy Shevchenko <[email protected]>
PCI: Disable MSI for Pericom PCIe-USB adapter

Marc Zyngier <[email protected]>
drm/meson: dw-hdmi: Enable the iahb clock early enough

Marc Zyngier <[email protected]>
drm/meson: dw-hdmi: Disable clocks on driver teardown

Uwe Kleine-König <[email protected]>
spi: fix resource leak for drivers without .remove callback

Corentin Labbe <[email protected]>
crypto: sun8i-ce - fix two error path's memory leak

Zhang Qilong <[email protected]>
crypto: omap-aes - Fix PM disable depth imbalance in omap_aes_probe

Nathan Chancellor <[email protected]>
crypto: crypto4xx - Replace bitwise OR with logical OR in crypto4xx_build_pd

Uladzislau Rezki (Sony) <[email protected]>
rcu/tree: Defer kvfree_rcu() allocation to a clean context

Peter Zijlstra <[email protected]>
rcu,ftrace: Fix ftrace recursion

Peter Zijlstra <[email protected]>
rcu: Allow rcu_irq_enter_check_tick() from NMI

Jaegeuk Kim <[email protected]>
scsi: ufs: Fix clkgating on/off

Jaegeuk Kim <[email protected]>
scsi: ufs: Avoid to call REQ_CLKS_OFF to CLKS_OFF

Yazen Ghannam <[email protected]>
EDAC/mce_amd: Use struct cpuinfo_x86.cpu_die_id for AMD NodeId

Tony Lindgren <[email protected]>
mfd: cpcap: Fix interrupt regression with regmap clear_ack

Amelie Delaunay <[email protected]>
mfd: stmfx: Fix dev_err_probe() call in stmfx_chip_init()

Geert Uytterhoeven <[email protected]>
mfd: MFD_SL28CPLD should depend on ARCH_LAYERSCAPE

Jing Xiangfeng <[email protected]>
mfd: htc-i2cpld: Add the missed i2c_put_adapter() in htcpld_register_chip_i2c()

Kaixu Xia <[email protected]>
powerpc/powernv/sriov: fix unsigned int win compared to less than zero

Zhang Xiaoxu <[email protected]>
Revert "powerpc/pseries/hotplug-cpu: Remove double free in error path"

Andrew Jeffery <[email protected]>
ARM: dts: tacoma: Fix node vs reg mismatch for flash memory

Christophe Leroy <[email protected]>
powerpc/feature: Fix CPU_FTRS_ALWAYS by removing CPU_FTRS_GENERIC_32

Ard Biesheuvel <[email protected]>
powerpc: Avoid broken GCC __attribute__((optimize))

Björn Töpel <[email protected]>
selftests/bpf: Fix broken riscv build

Zhang Qilong <[email protected]>
spi: mxs: fix reference leak in mxs_spi_probe

Yang Yingliang <[email protected]>
usb/max3421: fix return error code in max3421_probe()

Carl Yin <[email protected]>
bus: mhi: core: Fix null pointer access when parsing MHI configuration

Bhaumik Bhatt <[email protected]>
bus: mhi: core: Remove double locking from mhi_driver_remove()

Dmitry Torokhov <[email protected]>
Input: ads7846 - fix unaligned access on 7845

Oleksij Rempel <[email protected]>
Input: ads7846 - fix integer overflow on Rt calculation

David Jander <[email protected]>
Input: ads7846 - fix race that causes missing releases

Lukas Bulwahn <[email protected]>
iommu/vt-d: include conditionally on CONFIG_INTEL_IOMMU_SVM

Geert Uytterhoeven <[email protected]>
ASoC: intel: SND_SOC_INTEL_KEEMBAY should depend on ARCH_KEEMBAY

Marc Zyngier <[email protected]>
drm/meson: dw-hdmi: Ensure that clocks are enabled before touching the TOP registers

Marc Zyngier <[email protected]>
drm/meson: dw-hdmi: Register a callback to disable the regulator

Marc Zyngier <[email protected]>
drm/meson: Unbind all connectors on module removal

Marc Zyngier <[email protected]>
drm/meson: Free RDMA resources after tearing down DRM

Yang Yingliang <[email protected]>
drm/omap: dmm_tiler: fix return error code in omap_dmm_probe()

Wolfram Sang <[email protected]>
mmc: sdhci: tegra: fix wrong unit with busy_timeout

Yang Yingliang <[email protected]>
video: fbdev: atmel_lcdfb: fix return error code in atmel_lcdfb_of_init()

Qinglang Miao <[email protected]>
media: solo6x10: fix missing snd_card_free in error handling case

Mansur Alisha Shaik <[email protected]>
media: venus: put dummy vote on video-mem path after last session release

Martin Wilck <[email protected]>
scsi: core: Fix VPD LUN ID designator priorities

Randy Dunlap <[email protected]>
spi: dw: fix build error by selecting MULTIPLEXER

Jerome Brunet <[email protected]>
ASoC: meson: fix COMPILE_TEST error

Leon Romanovsky <[email protected]>
RDMA/cma: Add missing error handling of listen_id

Mansur Alisha Shaik <[email protected]>
media: venus: core: vote with average bandwidth and peak bandwidth as zero

Mansur Alisha Shaik <[email protected]>
media: venus: core: vote for video-mem path

Mansur Alisha Shaik <[email protected]>
media: venus: core: change clk enable and disable order in resume and suspend

Yu Kuai <[email protected]>
media: platform: add missing put_device() call in mtk_jpeg_probe() and mtk_jpeg_remove()

Zhang Qilong <[email protected]>
media: cedrus: fix reference leak in cedrus_start_streaming

Zhang Qilong <[email protected]>
media: staging: rkisp1: cap: fix runtime PM imbalance on error

Hugues Fruchet <[email protected]>
media: ov5640: fix support of BT656 bus mode

Sakari Ailus <[email protected]>
media: v4l2-fwnode: v4l2_fwnode_endpoint_parse caller must init vep argument

Lad Prabhakar <[email protected]>
media: v4l2-fwnode: Return -EINVAL for invalid bus-type

Yu Kuai <[email protected]>
media: mtk-vcodec: add missing put_device() call in mtk_vcodec_init_enc_pm()

Yu Kuai <[email protected]>
media: mtk-vcodec: add missing put_device() call in mtk_vcodec_release_dec_pm()

Yu Kuai <[email protected]>
media: mtk-vcodec: add missing put_device() call in mtk_vcodec_init_dec_pm()

Yu Kuai <[email protected]>
media: platform: add missing put_device() call in mtk_jpeg_clk_init()

Colin Ian King <[email protected]>
media: tm6000: Fix sizeof() mismatches

Shannon Nelson <[email protected]>
ionic: change set_rx_mode from_ndo to can_sleep

Shannon Nelson <[email protected]>
ionic: flatten calls to ionic_lif_rx_mode

Shannon Nelson <[email protected]>
ionic: use mc sync for multicast filters

Hanjun Guo <[email protected]>
drm/amdkfd: Put ACPI table after using it

Andy Shevchenko <[email protected]>
scripts: kernel-doc: Restore anonymous enum parsing

Jing Xiangfeng <[email protected]>
staging: gasket: interrupt: fix the missed eventfd_ctx_put() in gasket_interrupt.c

Zhang Qilong <[email protected]>
staging: greybus: codecs: Fix reference counter leak in error handling

Dan Carpenter <[email protected]>
drm/udl: Fix missing error code in udl_handle_damage()

Qinglang Miao <[email protected]>
firmware: arm_scmi: Fix missing destroy_workqueue()

Jack Xu <[email protected]>
crypto: qat - fix status check in qat_hal_put_rel_rd_xfer()

Jason A. Donenfeld <[email protected]>
crypto: Kconfig - CRYPTO_MANAGER_EXTRA_TESTS requires the manager

Tony Lindgren <[email protected]>
soc: ti: omap-prm: Do not check rstst bit on deassert if already deasserted

Nirmoy Das <[email protected]>
drm/amdgpu: fix compute queue priority if num_kcq is less than 4

Necip Fazil Yildiran <[email protected]>
MIPS: BCM47XX: fix kconfig dependency bug for BCM47XX_BCMA

Nishanth Menon <[email protected]>
arm64: dts: ti: k3-am65*/j721e*: Fix unit address format error for dss node

Pierre-Louis Bossart <[email protected]>
ASoC: SOF: Intel: fix Kconfig dependency for SND_INTEL_DSP_CONFIG

Arnd Bergmann <[email protected]>
RDMa/mthca: Work around -Wenum-conversion warning

Zhang Qilong <[email protected]>
ASoC: arizona: Fix a wrong free in wm8997_probe

Vincent Bernat <[email protected]>
net: evaluate net.ipv4.conf.all.proxy_arp_pvlan

Vincent Bernat <[email protected]>
net: evaluate net.ipvX.conf.all.ignore_routes_with_linkdown

Miklos Szeredi <[email protected]>
virtiofs fix leak in setup

Zhang Qilong <[email protected]>
spi: sprd: fix reference leak in sprd_spi_remove

Zhang Qilong <[email protected]>
ASoC: wm8998: Fix PM disable depth imbalance on error

Zhang Qilong <[email protected]>
ASoC: wm8994: Fix PM disable depth imbalance on error

Hangbin Liu <[email protected]>
selftest/bpf: Add missed ip6ip6 test back

Hangbin Liu <[email protected]>
selftests/run_kselftest.sh: fix dry-run typo

Abhinav Kumar <[email protected]>
drm/msm/dp: do not notify audio subsystem if sink doesn't support audio

Kuogee Hsieh <[email protected]>
drm/msm/dp: skip checking LINK_STATUS_UPDATED bit

Kuogee Hsieh <[email protected]>
drm/msm/dp: return correct connection status after suspend

Arnd Bergmann <[email protected]>
firmware: tegra: fix strncpy()/strncat() confusion

Rob Clark <[email protected]>
drm/msm/a5xx: Clear shadow on suspend

Rob Clark <[email protected]>
drm/msm/a6xx: Clear shadow on suspend

Tsuchiya Yuto <[email protected]>
mwifiex: fix mwifiex_shutdown_sw() causing sw reset failure

Alex Dewar <[email protected]>
ath11k: Handle errors if peer creation fails

Dan Carpenter <[email protected]>
ASoC: qcom: common: Fix refcounting in qcom_snd_parse_of()

Zhang Qilong <[email protected]>
spi: imx: fix reference leak in two imx operations

Qinglang Miao <[email protected]>
spi: bcm63xx-hsspi: fix missing clk_disable_unprepare() on error in bcm63xx_hsspi_resume

Zhang Qilong <[email protected]>
spi: tegra114: fix reference leak in tegra spi ops

Zhang Qilong <[email protected]>
spi: tegra20-sflash: fix reference leak in tegra_sflash_resume

Zhang Qilong <[email protected]>
spi: tegra20-slink: fix reference leak in slink ops of tegra20

Qinglang Miao <[email protected]>
spi: mt7621: fix missing clk_disable_unprepare() on error in mt7621_spi_probe

Zhang Qilong <[email protected]>
spi: spi-ti-qspi: fix reference leak in ti_qspi_setup

Zhang Qilong <[email protected]>
spi: stm32-qspi: fix reference leak in stm32 qspi operations

Anant Thazhemadam <[email protected]>
Bluetooth: hci_h5: fix memory leak in h5_close

Sathish Narasimman <[email protected]>
Bluetooth: Fix: LL PRivacy BLE device fails to connect

Anmol Karn <[email protected]>
Bluetooth: Fix null pointer dereference in hci_event_packet()

Stephen Boyd <[email protected]>
drm/panel: simple: Add flags to boe_nv133fhm_n61

Paweł Chmiel <[email protected]>
arm64: dts: exynos: Correct psci compatible used on Exynos7

Paweł Chmiel <[email protected]>
arm64: dts: exynos: Include common syscon restart/poweroff for Exynos7

Seung-Woo Kim <[email protected]>

    brcmfmac: Fix memory leak for unpaired brcmf_{alloc/free}

Karthikeyan Periyasamy <[email protected]>
ath11k: fix wmi init configuration

Sven Eckelmann <[email protected]>
ath11k: Fix number of rules in filtered ETSI regdomain

Sven Eckelmann <[email protected]>
ath11k: Initialize complete alpha2 for regulatory change

Lyude Paul <[email protected]>
drm/edid: Fix uninitialized variable in drm_cvt_modes()

Zhen Lei <[email protected]>
x86/mce: Correct the detection of invalid notifier priorities

KP Singh <[email protected]>
bpf: Fix tests for local_storage

Zhang Qilong <[email protected]>
spi: stm32: fix reference leak in stm32_spi_resume

Colin Ian King <[email protected]>

    nl80211/cfg80211: fix potential infinite loop

Paul Moore <[email protected]>
selinux: fix inode_doinit_with_dentry() LABEL_INVALID error handling

Horia Geantă <[email protected]>
crypto: caam - fix printing on xts fallback allocation error path

Horia Geantă <[email protected]>
crypto: arm/aes-neonbs - fix usage of cbc(aes) fallback

Ard Biesheuvel <[email protected]>
crypto: arm64/poly1305-neon - reorder PAC authentication with SP update

Andrii Nakryiko <[email protected]>
libbpf: Fix BTF data layout checks and allow empty BTF

YueHaibing <[email protected]>
drm/bridge: tpd12s015: Fix irq registering in tpd12s015_probe

Cezary Rojewski <[email protected]>
ASoC: pcm: DRAIN support reactivation

He Zhe <[email protected]>
pinctrl: core: Add missing #ifdef CONFIG_GPIOLIB

Arnd Bergmann <[email protected]>
scsi: aacraid: Improve compat_ioctl handlers

Zhang Qilong <[email protected]>
spi: spi-mem: fix reference leak in spi_mem_access_start

Dmitry Baryshkov <[email protected]>
drm/msm/dpu: fix clock scaling on non-sc7180 board

Dmitry Baryshkov <[email protected]>
drm/msm/dsi_pll_10nm: restore VCO rate during restore_state

Dmitry Baryshkov <[email protected]>
drm/msm/dsi_pll_7nm: restore VCO rate during restore_state

Tanmay Shah <[email protected]>
drm/msm/dp: DisplayPort PHY compliance tests fixup

Namhyung Kim <[email protected]>
perf test: Use generic event for expand_libpfm_events()

Jason Gunthorpe <[email protected]>
RDMA/mlx5: Fix corruption of reg_pages in mlx5_ib_rereg_user_mr()

Jaegeuk Kim <[email protected]>
f2fs: call f2fs_get_meta_page_retry for nat page

Zhang Qilong <[email protected]>
spi: img-spfi: fix reference leak in img_spfi_resume

Jordan Niethe <[email protected]>
powerpc/64: Set up a kernel stack for secondaries before cpu_restore()

Arnd Bergmann <[email protected]>
drm/amdgpu: fix build_coefficients() argument

Vijay Khemka <[email protected]>
ARM: dts: aspeed: tiogapass: Remove vuart

Robin Murphy <[email protected]>
drm/msm: Add missing stub definition

Clément Péron <[email protected]>
ASoC: sun4i-i2s: Fix lrck_period computation for I2S justified mode

Colin Ian King <[email protected]>
crypto: inside-secure - Fix sizeof() mismatch

Christophe Leroy <[email protected]>
crypto: talitos - Fix return type of current_desc_hdr()

Christophe Leroy <[email protected]>
crypto: talitos - Endianess in current_desc_hdr()

Arnd Bergmann <[email protected]>
drm/amdgpu: fix incorrect enum type

Thomas Gleixner <[email protected]>
sched: Reenable interrupts in do_sched_yield()

Peng Liu <[email protected]>
sched/deadline: Fix sched_dl_global_validate()

Colin Ian King <[email protected]>
ASoC: qcom: fix unsigned int bitwidth compared to less than zero

David Woodhouse <[email protected]>
x86/apic: Fix x2apic enablement without interrupt remapping

Guoqing Jiang <[email protected]>
RDMA/rtrs-srv: Don't guard the whole __alloc_srv with srv_mutex

Gioh Kim <[email protected]>
RDMA/rtrs-clt: Missing error from rtrs_rdma_conn_established

Danil Kipnis <[email protected]>
RDMA/rtrs-clt: Remove destroy_con_cq_qp in case route resolving failed

Ard Biesheuvel <[email protected]>
ARM: p2v: fix handling of LPAE translation in BE mode

Arvind Sankar <[email protected]>
x86/mm/ident_map: Check for errors from ident_pud_init()

Bob Pearson <[email protected]>
RDMA/rxe: Compute PSN windows correctly

Jing Xiangfeng <[email protected]>
RDMA/core: Fix error return in _ib_modify_qp()

Joel Stanley <[email protected]>
ARM: dts: aspeed: s2600wf: Fix VGA memory region location

Billy Tsai <[email protected]>
ARM: dts: aspeed-g6: Fix the GPIO memory size

Tianyue Ren <[email protected]>
selinux: fix error initialization in inode_doinit_with_dentry()

Selvin Xavier <[email protected]>
RDMA/bnxt_re: Fix entry size during SRQ create

Dan Carpenter <[email protected]>

    rtc: pcf2127: fix pcf2127_nvmem_read/write() returns

Kamal Heib <[email protected]>
RDMA/bnxt_re: Set queue pair state when being queried

Douglas Anderson <[email protected]>
Revert "i2c: i2c-qcom-geni: Fix DMA transfer race"

Douglas Anderson <[email protected]>
soc: qcom: geni: More properly switch to DMA mode

Douglas Anderson <[email protected]>
arm64: dts: qcom: sc7180: Fix one forgotten interconnect reference

Kathiravan T <[email protected]>
arm64: dts: ipq6018: update the reserved-memory node

Fabien Parent <[email protected]>
arm64: dts: mediatek: mt8183: fix gce incorrect mbox-cells value

Nicolas Boichat <[email protected]>
soc: mediatek: Check if power domains can be powered on at boot time

Dan Carpenter <[email protected]>
soc: renesas: rmobile-sysc: Fix some leaks in rmobile_init_pm_domains()

Biju Das <[email protected]>
arm64: dts: renesas: cat875: Remove rxc-skew-ps from ethernet-phy node

Biju Das <[email protected]>
arm64: dts: renesas: hihope-rzg2-ex: Drop rxc-skew-ps from ethernet-phy node

Krzysztof Kozlowski <[email protected]>
drm/tve200: Fix handling of platform_get_irq() error

Krzysztof Kozlowski <[email protected]>
drm/mcde: Fix handling of platform_get_irq() error

Randy Dunlap <[email protected]>
drm/aspeed: Fix Kconfig warning & subsequent build errors

Alexandru Ardelean <[email protected]>
iio: adc: at91_adc: add Kconfig dep on the OF symbol and remove of_match_ptr()

Tom Rix <[email protected]>
drm/gma500: fix double free of gma_connector

Guenter Roeck <[email protected]>
hwmon: (k10temp) Remove support for displaying voltage and current on Zen CPUs

-------------

Diffstat:

 Documentation/locking/seqlock.rst                  |  21 +-
 Documentation/networking/ip-sysctl.rst             |   3 +
 Makefile                                           |   4 +-
 arch/Kconfig                                       |  16 ++
 arch/arm/boot/compressed/head.S                    |   4 +-
 arch/arm/boot/dts/armada-xp-98dx3236.dtsi          |   5 -
 .../arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts |   5 -
 arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts     |   4 +-
 arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts        |   2 +-
 arch/arm/boot/dts/aspeed-g6.dtsi                   |   2 +-
 arch/arm/boot/dts/at91-sam9x60ek.dts               |  13 +-
 arch/arm/boot/dts/at91-sama5d3_xplained.dts        |   7 +
 arch/arm/boot/dts/at91-sama5d4_xplained.dts        |   7 +
 arch/arm/boot/dts/at91sam9rl.dtsi                  |  19 +-
 arch/arm/boot/dts/meson8b-odroidc1.dts             |   2 +-
 arch/arm/boot/dts/meson8m2-mxiii-plus.dts          |   2 +-
 arch/arm/boot/dts/omap4-panda-es.dts               |   2 +-
 arch/arm/boot/dts/sama5d2.dtsi                     |   7 +-
 arch/arm/boot/dts/tegra20-ventana.dts              |  11 ++
 arch/arm/crypto/aes-ce-core.S                      |  32 ++-
 arch/arm/crypto/aes-neonbs-glue.c                  |   8 +-
 arch/arm/kernel/entry-armv.S                       |  25 +--
 arch/arm/kernel/head.S                             |   6 +-
 arch/arm/vfp/entry.S                               |  17 --
 arch/arm/vfp/vfphw.S                               |   5 -
 arch/arm/vfp/vfpmodule.c                           |  72 ++++++-
 arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts |   2 +-
 .../boot/dts/amlogic/meson-g12b-odroid-n2.dtsi     |   2 +-
 arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi   |   2 +-
 .../boot/dts/amlogic/meson-gxbb-nanopi-k2.dts      |   2 +-
 .../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts |   2 +-
 .../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi      |   2 +-
 arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi  |   2 +-
 .../boot/dts/amlogic/meson-gxl-s905d-p230.dts      |   2 +-
 .../boot/dts/amlogic/meson-gxm-khadas-vim2.dts     |   4 +-
 .../arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts |   2 +-
 arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts     |   2 +-
 arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts |   2 +-
 arch/arm64/boot/dts/amlogic/meson-sm1.dtsi         |   2 +-
 arch/arm64/boot/dts/exynos/exynos7.dtsi            |  12 +-
 .../dts/freescale/fsl-ls1028a-kontron-sl28.dts     |  12 +-
 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi     |   4 +-
 .../boot/dts/marvell/armada-3720-turris-mox.dts    |   2 +-
 arch/arm64/boot/dts/marvell/armada-7040.dtsi       |   4 -
 arch/arm64/boot/dts/marvell/armada-8040.dtsi       |   4 -
 arch/arm64/boot/dts/mediatek/mt8183.dtsi           |   2 +-
 arch/arm64/boot/dts/nvidia/tegra194.dtsi           |   4 +-
 arch/arm64/boot/dts/qcom/ipq6018.dtsi              |   6 +-
 .../dts/qcom/msm8916-samsung-a2015-common.dtsi     |  11 ++
 arch/arm64/boot/dts/qcom/sc7180.dtsi               |   5 +-
 arch/arm64/boot/dts/qcom/sdm845.dtsi               |   3 +-
 .../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts      |  39 ++--
 arch/arm64/boot/dts/qcom/sm8250-mtp.dts            |   2 +-
 arch/arm64/boot/dts/renesas/cat875.dtsi            |   1 -
 arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi    |   1 -
 arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts     |   1 +
 arch/arm64/boot/dts/rockchip/rk3328.dtsi           |  16 +-
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi           |   4 +-
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi          |   2 +-
 arch/arm64/crypto/poly1305-armv8.pl                |   2 +-
 arch/arm64/crypto/poly1305-core.S_shipped          |   2 +-
 arch/arm64/include/asm/kvm_host.h                  |   1 +
 arch/arm64/kernel/mte.c                            |   3 +-
 arch/arm64/kvm/sys_regs.c                          |   1 +
 arch/m68k/mac/config.c                             |  17 +-
 arch/mips/bcm47xx/Kconfig                          |   1 +
 arch/mips/kernel/setup.c                           |   4 +-
 arch/powerpc/boot/Makefile                         |   2 +
 arch/powerpc/include/asm/bitops.h                  |  23 ++-
 arch/powerpc/include/asm/book3s/32/mmu-hash.h      |   1 +
 arch/powerpc/include/asm/book3s/32/pgtable.h       |   4 +-
 arch/powerpc/include/asm/cpm1.h                    |   1 +
 arch/powerpc/include/asm/cputable.h                |   7 +-
 arch/powerpc/include/asm/nohash/pgtable.h          |   4 +-
 arch/powerpc/kernel/Makefile                       |   3 +
 arch/powerpc/kernel/head_32.h                      |  25 ++-
 arch/powerpc/kernel/head_64.S                      |  10 +-
 arch/powerpc/kernel/paca.c                         |   4 +-
 arch/powerpc/kernel/rtas.c                         |   2 +-
 arch/powerpc/kernel/setup-common.c                 |   4 +-
 arch/powerpc/kernel/setup.h                        |   6 -
 arch/powerpc/kernel/setup_64.c                     |   2 +-
 arch/powerpc/kernel/smp.c                          |   2 +-
 arch/powerpc/lib/sstep.c                           |  10 +-
 arch/powerpc/mm/fault.c                            |   8 +-
 arch/powerpc/mm/mem.c                              |   2 +-
 arch/powerpc/perf/core-book3s.c                    |  13 ++
 arch/powerpc/perf/isa207-common.c                  |  30 ++-
 arch/powerpc/perf/isa207-common.h                  |  20 +-
 arch/powerpc/perf/power10-pmu.c                    |  11 +-
 arch/powerpc/platforms/8xx/micropatch.c            |  11 ++
 arch/powerpc/platforms/Kconfig.cputype             |   2 +-
 arch/powerpc/platforms/powermac/sleep.S            | 132 ++++++-------
 arch/powerpc/platforms/powernv/memtrace.c          |  44 ++++-
 arch/powerpc/platforms/powernv/npu-dma.c           |  16 +-
 arch/powerpc/platforms/powernv/pci-sriov.c         |   2 +-
 arch/powerpc/platforms/pseries/hotplug-cpu.c       |   1 +
 arch/powerpc/platforms/pseries/suspend.c           |   4 -
 arch/powerpc/xmon/nonstdio.c                       |   2 +-
 arch/powerpc/xmon/xmon.c                           |   2 +
 arch/riscv/mm/init.c                               |   2 +-
 arch/s390/kernel/entry.S                           |  44 +++--
 arch/s390/kernel/smp.c                             |  18 +-
 arch/s390/lib/test_unwind.c                        |   7 +-
 arch/s390/purgatory/head.S                         |   9 +-
 arch/sparc/mm/init_64.c                            |   2 +-
 arch/um/drivers/chan_user.c                        |   4 +-
 arch/um/drivers/xterm.c                            |   5 +
 arch/um/kernel/time.c                              |   5 -
 arch/um/os-Linux/irq.c                             |   2 +-
 arch/um/os-Linux/umid.c                            |  17 +-
 arch/x86/events/intel/core.c                       |   5 +-
 arch/x86/events/intel/lbr.c                        |   2 +-
 arch/x86/include/asm/apic.h                        |   1 +
 arch/x86/include/asm/mce.h                         |   3 +-
 arch/x86/kernel/apic/apic.c                        |  14 +-
 arch/x86/kernel/apic/x2apic_phys.c                 |   9 +
 arch/x86/kernel/cpu/mce/core.c                     |   3 +-
 arch/x86/kernel/kprobes/core.c                     |   5 +
 arch/x86/kernel/tboot.c                            |   1 +
 arch/x86/kvm/cpuid.h                               |  14 ++
 arch/x86/kvm/svm/sev.c                             |  22 +--
 arch/x86/kvm/svm/svm.c                             |  14 +-
 arch/x86/kvm/vmx/vmx.c                             |   8 +-
 arch/x86/mm/ident_map.c                            |  12 +-
 crypto/Kconfig                                     |   2 +-
 crypto/ecdh.c                                      |   9 +-
 drivers/accessibility/speakup/speakup_dectlk.c     |   2 +-
 drivers/acpi/acpi_pnp.c                            |   3 +
 drivers/acpi/device_pm.c                           |  41 ++--
 drivers/acpi/nfit/core.c                           |   6 +-
 drivers/acpi/resource.c                            |   2 +-
 drivers/android/binder.c                           |   1 +
 drivers/android/binder_alloc.c                     |  48 +++++
 drivers/android/binder_alloc.h                     |   4 +-
 drivers/base/core.c                                |   2 +-
 drivers/block/null_blk_zoned.c                     |  28 ++-
 drivers/block/rnbd/rnbd-clt-sysfs.c                |  17 +-
 drivers/block/rnbd/rnbd-clt.c                      |  13 +-
 drivers/block/rnbd/rnbd-clt.h                      |   4 +-
 drivers/block/xen-blkback/xenbus.c                 |   4 +-
 drivers/bluetooth/btmtksdio.c                      |   2 +-
 drivers/bluetooth/btusb.c                          |  10 +-
 drivers/bluetooth/hci_h5.c                         |   3 +
 drivers/bus/fsl-mc/fsl-mc-allocator.c              |   4 +-
 drivers/bus/fsl-mc/fsl-mc-bus.c                    |   5 +-
 drivers/bus/mhi/core/init.c                        |   6 +-
 drivers/bus/mips_cdmm.c                            |   4 +-
 drivers/clk/at91/sam9x60.c                         |   6 +-
 drivers/clk/at91/sama7g5.c                         |   6 +-
 drivers/clk/bcm/clk-bcm2711-dvp.c                  |   1 +
 drivers/clk/clk-fsl-sai.c                          |  12 ++
 drivers/clk/clk-s2mps11.c                          |   1 +
 drivers/clk/clk-versaclock5.c                      |   4 +-
 drivers/clk/ingenic/cgu.c                          |  14 +-
 drivers/clk/meson/Kconfig                          |   1 +
 drivers/clk/mvebu/armada-37xx-xtal.c               |   4 +-
 drivers/clk/qcom/gcc-sc7180.c                      |   4 +-
 drivers/clk/renesas/r8a779a0-cpg-mssr.c            |  13 +-
 drivers/clk/sunxi-ng/ccu-sun50i-a64.c              |   1 +
 drivers/clk/sunxi-ng/ccu-sun8i-h3.c                |   1 +
 drivers/clk/tegra/clk-dfll.c                       |   4 +-
 drivers/clk/tegra/clk-id.h                         |   1 +
 drivers/clk/tegra/clk-tegra-periph.c               |   2 +-
 drivers/clk/ti/fapll.c                             |  11 +-
 drivers/clocksource/Kconfig                        |   2 +-
 drivers/clocksource/arm_arch_timer.c               |  27 ++-
 drivers/clocksource/ingenic-timer.c                |   2 +-
 drivers/clocksource/timer-cadence-ttc.c            |  18 +-
 drivers/clocksource/timer-orion.c                  |  11 +-
 drivers/counter/microchip-tcb-capture.c            |  16 +-
 drivers/cpufreq/Kconfig.arm                        |   2 +-
 drivers/cpufreq/armada-8k-cpufreq.c                |   6 +
 drivers/cpufreq/highbank-cpufreq.c                 |   7 +
 drivers/cpufreq/intel_pstate.c                     |  16 +-
 drivers/cpufreq/loongson1-cpufreq.c                |   1 +
 drivers/cpufreq/mediatek-cpufreq.c                 |   1 +
 drivers/cpufreq/qcom-cpufreq-nvmem.c               |   1 +
 drivers/cpufreq/scpi-cpufreq.c                     |   1 +
 drivers/cpufreq/sti-cpufreq.c                      |   7 +
 drivers/cpufreq/sun50i-cpufreq-nvmem.c             |   1 +
 drivers/cpufreq/vexpress-spc-cpufreq.c             |   1 +
 drivers/crypto/Kconfig                             |   1 +
 drivers/crypto/allwinner/sun8i-ce/sun8i-ce-hash.c  |  20 +-
 drivers/crypto/amcc/crypto4xx_core.c               |   2 +-
 drivers/crypto/caam/caamalg.c                      |   4 +-
 drivers/crypto/caam/caamalg_qi.c                   |   4 +-
 drivers/crypto/caam/caamalg_qi2.c                  |   3 +-
 drivers/crypto/inside-secure/safexcel.c            |   2 +-
 drivers/crypto/omap-aes.c                          |   3 +-
 drivers/crypto/qat/qat_common/qat_hal.c            |   2 +-
 drivers/crypto/talitos.c                           |  10 +-
 drivers/dax/super.c                                |   1 +
 drivers/dma-buf/dma-resv.c                         |   2 +-
 drivers/dma/mv_xor_v2.c                            |   4 +-
 drivers/dma/ti/k3-udma.c                           |   3 +-
 drivers/edac/amd64_edac.c                          |  26 +--
 drivers/edac/i10nm_base.c                          |  11 +-
 drivers/edac/mce_amd.c                             |   2 +-
 drivers/extcon/extcon-max77693.c                   |   2 +-
 drivers/firmware/arm_scmi/notify.c                 |  10 +-
 drivers/firmware/efi/efi.c                         |   1 +
 drivers/firmware/tegra/bpmp-debugfs.c              |   6 +-
 drivers/fsi/fsi-master-aspeed.c                    |  45 +++--
 drivers/gpio/gpiolib.c                             |   3 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c     |  10 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c            |  10 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h            |   2 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_gmc.c            |   9 +-
 drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c             |   6 +-
 drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c              |   6 +-
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c              |   7 +-
 drivers/gpu/drm/amd/amdkfd/kfd_crat.c              |  13 +-
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c  |  17 +-
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c   |   4 +-
 .../drm/amd/display/modules/color/color_gamma.c    |   2 +-
 drivers/gpu/drm/aspeed/Kconfig                     |   1 +
 drivers/gpu/drm/bridge/ti-tpd12s015.c              |   2 +-
 drivers/gpu/drm/drm_dp_aux_dev.c                   |   2 +-
 drivers/gpu/drm/drm_edid.c                         |   2 +
 drivers/gpu/drm/gma500/cdv_intel_dp.c              |   2 +-
 drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c     |   2 +-
 drivers/gpu/drm/imx/dcss/dcss-plane.c              |  11 +-
 drivers/gpu/drm/mcde/mcde_drv.c                    |   4 +-
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c        |   2 +-
 drivers/gpu/drm/meson/meson_drv.c                  |  12 +-
 drivers/gpu/drm/meson/meson_dw_hdmi.c              |  60 ++++--
 drivers/gpu/drm/msm/Kconfig                        |   2 +-
 drivers/gpu/drm/msm/adreno/a5xx_gpu.c              |  24 ++-
 drivers/gpu/drm/msm/adreno/a6xx_gpu.c              |  11 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c      |   6 +-
 drivers/gpu/drm/msm/dp/dp_catalog.c                |  13 ++
 drivers/gpu/drm/msm/dp/dp_catalog.h                |   1 +
 drivers/gpu/drm/msm/dp/dp_ctrl.c                   |  28 ++-
 drivers/gpu/drm/msm/dp/dp_display.c                | 154 ++++++++-------
 drivers/gpu/drm/msm/dp/dp_link.c                   |  41 ++--
 drivers/gpu/drm/msm/dp/dp_link.h                   |   1 +
 drivers/gpu/drm/msm/dp/dp_reg.h                    |   2 +
 drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c         |   8 +
 drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c          |   8 +
 drivers/gpu/drm/msm/msm_drv.h                      |   5 +
 drivers/gpu/drm/mxsfb/mxsfb_drv.c                  |  10 +-
 drivers/gpu/drm/omapdrm/omap_dmm_tiler.c           |   1 +
 drivers/gpu/drm/panel/panel-simple.c               |   1 +
 drivers/gpu/drm/panfrost/panfrost_device.c         |   1 -
 drivers/gpu/drm/panfrost/panfrost_device.h         |   6 +-
 drivers/gpu/drm/panfrost/panfrost_job.c            | 183 +++++++++++++----
 drivers/gpu/drm/tve200/tve200_drv.c                |   4 +-
 drivers/gpu/drm/udl/udl_modeset.c                  |   4 +-
 drivers/hsi/controllers/omap_ssi_core.c            |   2 +-
 drivers/hwmon/ina3221.c                            |   2 +-
 drivers/hwmon/k10temp.c                            |  98 ---------
 drivers/hwtracing/coresight/coresight-catu.c       |   2 +-
 drivers/hwtracing/coresight/coresight-cti-core.c   |   2 +-
 drivers/hwtracing/coresight/coresight-etb10.c      |   2 +-
 drivers/hwtracing/coresight/coresight-etm3x-core.c |   4 +-
 drivers/hwtracing/coresight/coresight-etm4x-core.c |   4 +-
 drivers/hwtracing/coresight/coresight-funnel.c     |   6 +-
 drivers/hwtracing/coresight/coresight-replicator.c |   6 +-
 drivers/hwtracing/coresight/coresight-stm.c        |   2 +-
 drivers/hwtracing/coresight/coresight-tmc-core.c   |   2 +-
 drivers/hwtracing/coresight/coresight-tpiu.c       |   2 +-
 drivers/i2c/busses/i2c-qcom-geni.c                 |   6 +-
 drivers/iio/adc/Kconfig                            |   2 +-
 drivers/iio/adc/ad_sigma_delta.c                   |  18 +-
 drivers/iio/adc/at91_adc.c                         |   2 +-
 drivers/iio/adc/rockchip_saradc.c                  |   2 +-
 drivers/iio/adc/ti-ads124s08.c                     |  13 +-
 drivers/iio/imu/bmi160/bmi160.h                    |   7 +
 drivers/iio/imu/bmi160/bmi160_core.c               |   6 +-
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c       |  26 ++-
 drivers/iio/industrialio-buffer.c                  |   6 +-
 drivers/iio/light/rpr0521.c                        |  17 +-
 drivers/iio/light/st_uvis25.h                      |   5 +
 drivers/iio/light/st_uvis25_core.c                 |   8 +-
 drivers/iio/magnetometer/mag3110.c                 |  13 +-
 drivers/iio/pressure/mpl3115.c                     |   9 +-
 drivers/iio/trigger/iio-trig-hrtimer.c             |   4 +-
 drivers/infiniband/core/cma.c                      | 195 ++++++++++--------
 drivers/infiniband/core/device.c                   |   7 +-
 drivers/infiniband/core/uverbs_std_types_device.c  |  14 +-
 drivers/infiniband/core/uverbs_std_types_mr.c      |   4 +
 drivers/infiniband/core/verbs.c                    |   4 +-
 drivers/infiniband/hw/bnxt_re/ib_verbs.c           |   5 +-
 drivers/infiniband/hw/cxgb4/cq.c                   |   3 +
 drivers/infiniband/hw/hns/hns_roce_ah.c            |  61 +++---
 drivers/infiniband/hw/hns/hns_roce_cq.c            |   5 +-
 drivers/infiniband/hw/hns/hns_roce_device.h        |  10 +-
 drivers/infiniband/hw/hns/hns_roce_hem.c           |   4 +-
 drivers/infiniband/hw/hns/hns_roce_hw_v2.c         |  56 +++---
 drivers/infiniband/hw/hns/hns_roce_main.c          |  11 +-
 drivers/infiniband/hw/hns/hns_roce_pd.c            |  11 +-
 drivers/infiniband/hw/hns/hns_roce_qp.c            |  18 +-
 drivers/infiniband/hw/hns/hns_roce_srq.c           |  10 +-
 drivers/infiniband/hw/mlx5/mr.c                    |  21 +-
 drivers/infiniband/hw/mthca/mthca_cq.c             |   2 +-
 drivers/infiniband/hw/mthca/mthca_dev.h            |   1 -
 drivers/infiniband/sw/rxe/rxe_req.c                |   3 +-
 drivers/infiniband/ulp/rtrs/rtrs-clt.c             |   8 +-
 drivers/infiniband/ulp/rtrs/rtrs-srv.c             |  86 ++++----
 drivers/input/keyboard/omap4-keypad.c              |  89 +++++----
 drivers/input/mouse/cyapa_gen6.c                   |   2 +-
 drivers/input/touchscreen/ads7846.c                |  52 +++--
 drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c         |  90 +++++++++
 drivers/iommu/arm/arm-smmu/arm-smmu.c              |  13 +-
 drivers/iommu/arm/arm-smmu/arm-smmu.h              |   1 +
 drivers/iommu/intel/iommu.c                        |   2 +-
 drivers/irqchip/irq-alpine-msi.c                   |   3 +-
 drivers/irqchip/irq-ti-sci-inta.c                  |   2 +-
 drivers/irqchip/irq-ti-sci-intr.c                  |  14 +-
 drivers/irqchip/qcom-pdc.c                         |  21 +-
 drivers/leds/leds-lp50xx.c                         |   6 +-
 drivers/leds/leds-netxbig.c                        |  35 ++--
 drivers/leds/leds-turris-omnia.c                   |   4 +-
 drivers/macintosh/adb-iop.c                        |  56 ++++--
 drivers/mailbox/arm_mhu_db.c                       |   2 +-
 drivers/md/dm-ioctl.c                              |   1 +
 drivers/md/md-cluster.c                            |  67 ++++---
 drivers/md/md.c                                    |  14 +-
 drivers/media/common/siano/smsdvb-main.c           |   5 +-
 drivers/media/i2c/imx214.c                         |   2 +-
 drivers/media/i2c/imx219.c                         |  17 +-
 drivers/media/i2c/max2175.c                        |   2 +-
 drivers/media/i2c/max9271.c                        |   8 +-
 drivers/media/i2c/ov5640.c                         |  82 ++++----
 drivers/media/i2c/rdacm20.c                        |  13 +-
 drivers/media/i2c/tvp5150.c                        |   1 +
 drivers/media/pci/intel/ipu3/ipu3-cio2.c           |  62 +++---
 drivers/media/pci/intel/ipu3/ipu3-cio2.h           |   1 +
 drivers/media/pci/netup_unidvb/netup_unidvb_spi.c  |   5 +-
 drivers/media/pci/saa7146/mxb.c                    |  19 +-
 drivers/media/pci/solo6x10/solo6x10-g723.c         |   2 +-
 drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c    |   9 +
 .../media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c  |  19 +-
 .../media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c  |  26 ++-
 drivers/media/platform/qcom/venus/core.c           |  32 ++-
 drivers/media/platform/qcom/venus/pm_helpers.c     |  10 +
 drivers/media/rc/sunxi-cir.c                       |   2 +
 drivers/media/usb/gspca/gspca.c                    |   1 +
 drivers/media/usb/tm6000/tm6000-video.c            |   5 +-
 drivers/media/v4l2-core/v4l2-fwnode.c              |   6 +-
 drivers/memory/Kconfig                             |   2 +-
 drivers/memory/jz4780-nemc.c                       |   6 +-
 drivers/memory/renesas-rpc-if.c                    |   7 +-
 drivers/memstick/core/memstick.c                   |   1 -
 drivers/memstick/host/r592.c                       |  12 +-
 drivers/mfd/Kconfig                                |   1 +
 drivers/mfd/htc-i2cpld.c                           |   2 +
 drivers/mfd/motorola-cpcap.c                       |   6 +-
 drivers/mfd/stmfx.c                                |  10 +-
 drivers/misc/pci_endpoint_test.c                   |   8 +-
 drivers/mmc/host/pxamci.c                          |   1 +
 drivers/mmc/host/sdhci-tegra.c                     |   2 +-
 drivers/mtd/mtdcore.c                              |   4 +
 drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c         |  38 ++--
 drivers/mtd/nand/raw/meson_nand.c                  |   7 +-
 drivers/mtd/nand/raw/qcom_nandc.c                  |   2 +
 drivers/mtd/nand/spi/core.c                        |   4 +
 drivers/mtd/parsers/cmdlinepart.c                  |  14 +-
 drivers/mtd/spi-nor/atmel.c                        |  77 ++++++--
 drivers/mtd/spi-nor/core.c                         |  25 +--
 drivers/mtd/spi-nor/core.h                         |   1 +
 drivers/mtd/spi-nor/sst.c                          |   3 +-
 drivers/net/can/m_can/m_can.c                      |   4 -
 drivers/net/dsa/qca/ar9331.c                       |  33 +++-
 drivers/net/ethernet/allwinner/sun4i-emac.c        |   7 +-
 drivers/net/ethernet/broadcom/genet/bcmgenet.c     |   4 +-
 drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c   |   2 +-
 drivers/net/ethernet/intel/i40e/i40e_xsk.c         |   5 +-
 drivers/net/ethernet/intel/ice/ice_xsk.c           |   5 +-
 drivers/net/ethernet/korina.c                      |   2 +-
 drivers/net/ethernet/mellanox/mlx5/core/main.c     |   6 +-
 drivers/net/ethernet/microchip/lan743x_main.c      |  43 ++--
 drivers/net/ethernet/mscc/ocelot_vsc7514.c         |   8 +-
 drivers/net/ethernet/netronome/nfp/flower/main.c   |   6 +-
 drivers/net/ethernet/pensando/ionic/ionic_lif.c    |  63 +++---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c   |   1 +
 drivers/net/virtio_net.c                           |   1 +
 drivers/net/wireless/admtek/adm8211.c              |   6 +-
 drivers/net/wireless/ath/ath10k/usb.c              |   7 +-
 drivers/net/wireless/ath/ath10k/wmi-tlv.c          |   4 +-
 drivers/net/wireless/ath/ath10k/wmi.c              |   9 +-
 drivers/net/wireless/ath/ath10k/wmi.h              |   1 +
 drivers/net/wireless/ath/ath11k/core.h             |   2 +
 drivers/net/wireless/ath/ath11k/dp_tx.c            |   5 +-
 drivers/net/wireless/ath/ath11k/hw.c               |   4 +-
 drivers/net/wireless/ath/ath11k/mac.c              |  54 +++--
 drivers/net/wireless/ath/ath11k/qmi.c              |   6 +-
 drivers/net/wireless/ath/ath11k/reg.c              |   6 +-
 drivers/net/wireless/ath/ath11k/wmi.c              |  31 ---
 .../broadcom/brcm80211/brcmfmac/cfg80211.c         |   3 +-
 .../wireless/broadcom/brcm80211/brcmfmac/pcie.c    |   6 +-
 .../wireless/broadcom/brcm80211/brcmfmac/sdio.c    |   1 +
 drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c   |   2 +-
 drivers/net/wireless/intel/iwlwifi/mvm/ops.c       |   6 +
 .../net/wireless/intersil/orinoco/orinoco_usb.c    |  14 +-
 drivers/net/wireless/marvell/mwifiex/main.c        |   2 +
 drivers/net/wireless/mediatek/mt76/dma.c           |   2 +
 drivers/net/wireless/mediatek/mt76/mac80211.c      |   1 +
 drivers/net/wireless/mediatek/mt76/mt7603/pci.c    |   3 +-
 drivers/net/wireless/mediatek/mt76/mt7615/mac.c    |  14 +-
 drivers/net/wireless/mediatek/mt76/mt7615/mmio.c   |   3 +-
 .../net/wireless/mediatek/mt76/mt7615/sdio_txrx.c  |   2 +-
 drivers/net/wireless/mediatek/mt76/mt76x0/pci.c    |   3 +-
 drivers/net/wireless/mediatek/mt76/mt76x2/pci.c    |   3 +-
 .../net/wireless/mediatek/mt76/mt7915/debugfs.c    |   2 +
 drivers/net/wireless/mediatek/mt76/mt7915/pci.c    |   5 +-
 drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c |   6 +-
 drivers/net/wireless/rsi/rsi_91x_usb.c             |  30 +--
 drivers/net/wireless/st/cw1200/main.c              |   2 +
 drivers/net/xen-netback/xenbus.c                   |   6 +-
 drivers/nfc/s3fwrn5/firmware.c                     |   4 +-
 drivers/nvdimm/label.c                             |  13 +-
 drivers/pci/controller/pcie-brcmstb.c              |   1 +
 drivers/pci/controller/pcie-iproc.c                |  23 ++-
 drivers/pci/pci-acpi.c                             |   4 +-
 drivers/pci/pci.c                                  |  14 +-
 drivers/pci/quirks.c                               |  17 +-
 drivers/pci/slot.c                                 |   6 +-
 drivers/phy/mediatek/Kconfig                       |   4 +-
 drivers/phy/mediatek/phy-mtk-hdmi.c                |   5 +-
 drivers/phy/renesas/phy-rcar-gen3-usb2.c           |   6 +-
 drivers/phy/tegra/xusb.c                           |   2 +-
 drivers/pinctrl/core.c                             |   2 +
 drivers/pinctrl/pinctrl-falcon.c                   |  14 +-
 drivers/pinctrl/sunxi/pinctrl-sun50i-a100.c        |   2 +-
 drivers/pinctrl/sunxi/pinctrl-sunxi.c              |   6 +-
 drivers/platform/chrome/cros_ec_spi.c              |   1 -
 drivers/platform/x86/dell-smbios-base.c            |   1 +
 drivers/platform/x86/intel-vbtn.c                  |  18 +-
 drivers/platform/x86/mlx-platform.c                |  20 +-
 drivers/power/supply/axp288_charger.c              |  28 +--
 drivers/power/supply/bq24190_charger.c             |  20 +-
 drivers/power/supply/bq25890_charger.c             |   2 +-
 drivers/power/supply/max17042_battery.c            |   3 +-
 drivers/ps3/ps3stor_lib.c                          |   2 +-
 drivers/pwm/pwm-imx27.c                            |   3 +-
 drivers/pwm/pwm-lp3943.c                           |   1 +
 drivers/pwm/pwm-sun4i.c                            |   6 +-
 drivers/pwm/pwm-zx.c                               |   1 +
 drivers/regulator/axp20x-regulator.c               |   2 +-
 drivers/remoteproc/mtk_common.h                    |  26 +--
 drivers/remoteproc/mtk_scp.c                       |   5 +-
 drivers/remoteproc/qcom_q6v5_adsp.c                |  13 +-
 drivers/remoteproc/qcom_q6v5_mss.c                 |   5 +-
 drivers/remoteproc/qcom_q6v5_pas.c                 |   5 +-
 drivers/remoteproc/qcom_sysmon.c                   |  25 ++-
 drivers/remoteproc/ti_k3_dsp_remoteproc.c          |   4 +-
 drivers/rtc/rtc-ep93xx.c                           |   6 +-
 drivers/rtc/rtc-pcf2127.c                          |  12 +-
 drivers/s390/block/dasd_alias.c                    |  22 ++-
 drivers/s390/cio/device.c                          |   4 +-
 drivers/scsi/aacraid/commctrl.c                    |  22 ++-
 drivers/scsi/aacraid/linit.c                       |  61 +-----
 drivers/scsi/fnic/fnic_main.c                      |   1 +
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c             |  26 ++-
 drivers/scsi/lpfc/lpfc.h                           |   2 +-
 drivers/scsi/lpfc/lpfc_disc.h                      |   2 +
 drivers/scsi/lpfc/lpfc_hbadisc.c                   |  35 ++++
 drivers/scsi/lpfc/lpfc_init.c                      |  46 +++--
 drivers/scsi/lpfc/lpfc_mem.c                       |  11 +-
 drivers/scsi/lpfc/lpfc_nvme.c                      |  18 +-
 drivers/scsi/lpfc/lpfc_sli.c                       |  74 +++++--
 drivers/scsi/lpfc/lpfc_sli4.h                      |   6 +-
 drivers/scsi/pm8001/pm8001_init.c                  |   3 +-
 drivers/scsi/pm8001/pm80xx_hwi.c                   |   2 +-
 drivers/scsi/qedi/qedi_main.c                      |   4 +-
 drivers/scsi/qla2xxx/qla_init.c                    |  71 +++++--
 drivers/scsi/qla2xxx/qla_mbx.c                     |   9 +-
 drivers/scsi/qla2xxx/qla_tmpl.c                    |   9 +-
 drivers/scsi/qla2xxx/qla_tmpl.h                    |   2 +-
 drivers/scsi/scsi_lib.c                            | 126 ++++++++----
 drivers/scsi/scsi_transport_iscsi.c                |   4 +-
 drivers/scsi/ufs/ufshcd.c                          |   5 +-
 drivers/slimbus/qcom-ctrl.c                        |   9 +-
 drivers/slimbus/qcom-ngd-ctrl.c                    |   6 +
 drivers/soc/amlogic/meson-canvas.c                 |   4 +-
 drivers/soc/mediatek/mtk-scpsys.c                  |   5 +-
 drivers/soc/qcom/pdr_interface.c                   |   2 +-
 drivers/soc/qcom/qcom-geni-se.c                    |  17 +-
 drivers/soc/qcom/smp2p.c                           |   5 +-
 drivers/soc/renesas/rmobile-sysc.c                 |   1 +
 drivers/soc/rockchip/io-domain.c                   |   1 +
 drivers/soc/ti/knav_dma.c                          |  13 +-
 drivers/soc/ti/knav_qmss_queue.c                   |   4 +-
 drivers/soc/ti/omap_prm.c                          |   4 +
 drivers/soundwire/master.c                         |  14 ++
 drivers/soundwire/qcom.c                           |   2 +-
 drivers/soundwire/sysfs_slave_dpn.c                |   1 +
 drivers/spi/Kconfig                                |   1 +
 drivers/spi/atmel-quadspi.c                        |  27 ++-
 drivers/spi/spi-ar934x.c                           |  14 +-
 drivers/spi/spi-bcm63xx-hsspi.c                    |   4 +-
 drivers/spi/spi-davinci.c                          |   2 +-
 drivers/spi/spi-dw-bt1.c                           |   4 +-
 drivers/spi/spi-fsl-dspi.c                         |   6 +-
 drivers/spi/spi-fsl-spi.c                          |  11 +-
 drivers/spi/spi-geni-qcom.c                        |   3 +-
 drivers/spi/spi-gpio.c                             |  15 +-
 drivers/spi/spi-img-spfi.c                         |   4 +-
 drivers/spi/spi-imx.c                              |   2 +
 drivers/spi/spi-mem.c                              |   1 +
 drivers/spi/spi-mt7621.c                           |  11 +-
 drivers/spi/spi-mtk-nor.c                          |   2 +-
 drivers/spi/spi-mxic.c                             |  10 +-
 drivers/spi/spi-mxs.c                              |   1 +
 drivers/spi/spi-npcm-fiu.c                         |   8 +-
 drivers/spi/spi-pic32.c                            |   1 +
 drivers/spi/spi-pxa2xx.c                           |   5 +-
 drivers/spi/spi-qcom-qspi.c                        |  42 ++--
 drivers/spi/spi-rb4xx.c                            |   2 +-
 drivers/spi/spi-rpc-if.c                           |   9 +-
 drivers/spi/spi-sc18is602.c                        |  13 +-
 drivers/spi/spi-sh.c                               |  13 +-
 drivers/spi/spi-sprd.c                             |   1 +
 drivers/spi/spi-st-ssc4.c                          |   5 +-
 drivers/spi/spi-stm32-qspi.c                       |   8 +-
 drivers/spi/spi-stm32.c                            |   1 +
 drivers/spi/spi-synquacer.c                        |  15 +-
 drivers/spi/spi-tegra114.c                         |   2 +
 drivers/spi/spi-tegra20-sflash.c                   |   1 +
 drivers/spi/spi-tegra20-slink.c                    |   2 +
 drivers/spi/spi-ti-qspi.c                          |   1 +
 drivers/spi/spi.c                                  |  19 +-
 drivers/staging/comedi/drivers/mf6x4.c             |   3 +-
 drivers/staging/gasket/gasket_interrupt.c          |  15 +-
 drivers/staging/greybus/audio_codec.c              |   2 +
 drivers/staging/greybus/audio_helper.c             |   3 +-
 drivers/staging/hikey9xx/hi6421-spmi-pmic.c        |   4 +-
 drivers/staging/media/rkisp1/rkisp1-capture.c      |   1 +
 drivers/staging/media/sunxi/cedrus/cedrus_video.c  |   4 +-
 drivers/staging/vc04_services/vchiq-mmal/Kconfig   |   2 +-
 drivers/thermal/cpufreq_cooling.c                  |   4 +-
 drivers/tty/serial/8250/8250_mtk.c                 |  13 +-
 drivers/tty/serial/pmac_zilog.c                    |  14 +-
 drivers/usb/host/ehci-omap.c                       |   1 +
 drivers/usb/host/max3421-hcd.c                     |   3 +-
 drivers/usb/host/oxu210hp-hcd.c                    |   4 +-
 drivers/usb/serial/digi_acceleport.c               |  45 ++---
 drivers/usb/serial/keyspan_pda.c                   |  63 +++---
 drivers/usb/serial/mos7720.c                       |   2 +
 drivers/vdpa/mlx5/net/mlx5_vnet.c                  |   5 +
 drivers/vfio/pci/vfio_pci.c                        |   7 +-
 drivers/vfio/pci/vfio_pci_nvlink2.c                |   7 +-
 drivers/vhost/scsi.c                               |   3 +-
 drivers/video/fbdev/atmel_lcdfb.c                  |   2 +-
 drivers/virtio/virtio_ring.c                       |   8 +-
 drivers/watchdog/Kconfig                           |   4 +-
 drivers/watchdog/qcom-wdt.c                        |   2 +-
 drivers/watchdog/sprd_wdt.c                        |  34 ++--
 drivers/watchdog/watchdog_core.c                   |  22 ++-
 drivers/xen/xen-pciback/xenbus.c                   |   2 +-
 drivers/xen/xenbus/xenbus.h                        |   2 +
 drivers/xen/xenbus/xenbus_client.c                 |   8 +-
 drivers/xen/xenbus/xenbus_probe.c                  |   1 +
 drivers/xen/xenbus/xenbus_probe_backend.c          |   7 +
 drivers/xen/xenbus/xenbus_xs.c                     |  34 ++--
 fs/btrfs/ctree.h                                   |   1 -
 fs/btrfs/extent-tree.c                             |  33 +---
 fs/btrfs/ioctl.c                                   |  39 ++++
 fs/btrfs/transaction.c                             |  42 +++-
 fs/ceph/caps.c                                     |  11 +-
 fs/cifs/smb2misc.c                                 |  16 +-
 fs/cifs/smb2ops.c                                  |   3 +-
 fs/cifs/smb2pdu.c                                  |   7 +-
 fs/cifs/smb2pdu.h                                  |  14 +-
 fs/erofs/data.c                                    |  26 +--
 fs/eventpoll.c                                     |  25 ++-
 fs/ext4/extents.c                                  |   4 +-
 fs/ext4/inode.c                                    |  19 +-
 fs/ext4/mballoc.c                                  |   1 +
 fs/ext4/super.c                                    |  14 +-
 fs/f2fs/node.c                                     |   2 +-
 fs/f2fs/super.c                                    |   1 +
 fs/fuse/virtio_fs.c                                |   2 +
 fs/inode.c                                         |   4 +-
 fs/io-wq.h                                         |   1 +
 fs/io_uring.c                                      | 178 ++++++++++-------
 fs/jffs2/readinode.c                               |  16 ++
 fs/jffs2/super.c                                   |  17 ++
 fs/jfs/jfs_dmap.h                                  |   2 +-
 fs/lockd/host.c                                    |  20 +-
 fs/nfs/flexfilelayout/flexfilelayout.c             |   2 +-
 fs/nfs/inode.c                                     |   2 +-
 fs/nfs/nfs4proc.c                                  |  10 +-
 fs/nfs/nfs4xdr.c                                   |  10 +-
 fs/nfs_common/grace.c                              |   6 +-
 fs/nfsd/filecache.c                                |   2 +-
 fs/nfsd/nfs4state.c                                |   1 +
 fs/nfsd/nfssvc.c                                   |   3 +-
 fs/notify/dnotify/dnotify.c                        |   2 +-
 fs/notify/fanotify/fanotify.c                      |   7 +-
 fs/notify/fsnotify.c                               | 107 ++++++----
 fs/notify/inotify/inotify.h                        |   9 +-
 fs/notify/inotify/inotify_fsnotify.c               |  51 +----
 fs/notify/inotify/inotify_user.c                   |   8 +-
 fs/open.c                                          |   4 +
 fs/overlayfs/file.c                                |  87 ++------
 fs/proc/generic.c                                  |  24 ++-
 fs/proc/internal.h                                 |   7 +
 fs/proc/proc_net.c                                 |  16 --
 fs/proc_namespace.c                                |   9 +-
 fs/ubifs/auth.c                                    |   4 +-
 fs/ubifs/io.c                                      |  13 +-
 include/acpi/acpi_bus.h                            |   5 -
 include/linux/fs.h                                 |   3 +-
 include/linux/fsnotify_backend.h                   |   9 +-
 include/linux/iio/adc/ad_sigma_delta.h             |   6 +-
 include/linux/inetdevice.h                         |   4 +-
 include/linux/mm_types.h                           |   8 +
 include/linux/of.h                                 |   1 +
 include/linux/proc_fs.h                            |   8 +-
 include/linux/rmap.h                               |   1 -
 include/linux/seq_buf.h                            |   2 +-
 include/linux/sunrpc/xprt.h                        |   1 +
 include/linux/trace_seq.h                          |   4 +-
 include/media/v4l2-fwnode.h                        |   6 +
 include/media/v4l2-mediabus.h                      |   2 +
 include/rdma/uverbs_ioctl.h                        |  10 +
 include/uapi/linux/android/binder.h                |   1 +
 include/uapi/linux/devlink.h                       |   2 +-
 include/xen/xenbus.h                               |  15 +-
 kernel/audit_fsnotify.c                            |   2 +-
 kernel/audit_tree.c                                |   2 +-
 kernel/audit_watch.c                               |   2 +-
 kernel/cgroup/cpuset.c                             |  33 +++-
 kernel/fork.c                                      |   1 +
 kernel/irq/irqdomain.c                             |  11 +-
 kernel/rcu/tree.c                                  | 118 ++++++-----
 kernel/sched/core.c                                |   6 +-
 kernel/sched/deadline.c                            |   5 +-
 kernel/sched/sched.h                               |  42 ++--
 kernel/trace/bpf_trace.c                           |   8 +-
 kernel/trace/ring_buffer.c                         |  17 +-
 kernel/trace/trace.c                               |  19 +-
 kernel/trace/trace.h                               |   5 +
 kernel/trace/trace_boot.c                          |   2 +
 kernel/trace/trace_events.c                        |   2 +-
 kernel/trace/trace_kprobe.c                        |   9 +-
 kernel/trace/trace_selftest.c                      |   2 +-
 lib/dynamic_debug.c                                |   9 +-
 mm/gup.c                                           | 220 +++++++++------------
 mm/huge_memory.c                                   |   2 +-
 mm/hugetlb.c                                       |   1 +
 mm/init-mm.c                                       |   1 +
 mm/madvise.c                                       |   9 +-
 mm/memcontrol.c                                    |   5 +-
 mm/memory-failure.c                                |   8 +-
 mm/memory.c                                        |  13 +-
 mm/memory_hotplug.c                                |   2 +-
 mm/migrate.c                                       |   8 +-
 mm/page_alloc.c                                    |  13 +-
 mm/rmap.c                                          |   9 -
 mm/vmalloc.c                                       |   6 +-
 mm/vmscan.c                                        |  14 +-
 mm/z3fold.c                                        | 174 ++++++++--------
 net/bluetooth/hci_event.c                          |   5 +
 net/bluetooth/hci_request.c                        |  12 +-
 net/bluetooth/sco.c                                |   5 +
 net/mac80211/rx.c                                  |   2 +-
 net/mac80211/vht.c                                 |  14 +-
 net/sunrpc/debugfs.c                               |   4 +-
 net/sunrpc/sched.c                                 |  65 +++---
 net/sunrpc/xprt.c                                  |  65 ++++--
 net/sunrpc/xprtrdma/module.c                       |   1 +
 net/sunrpc/xprtrdma/rpc_rdma.c                     |  40 +++-
 net/sunrpc/xprtrdma/transport.c                    |   1 +
 net/sunrpc/xprtsock.c                              |   7 +-
 net/wireless/scan.c                                |   2 +-
 samples/bpf/lwt_len_hist.sh                        |   2 +
 samples/bpf/test_lwt_bpf.sh                        |   0
 samples/bpf/xdpsock_user.c                         |   2 +
 scripts/checkpatch.pl                              |   2 +-
 scripts/kconfig/preprocess.c                       |   2 +-
 scripts/kernel-doc                                 |   4 +-
 security/integrity/ima/ima_crypto.c                |  20 +-
 security/selinux/hooks.c                           |  16 +-
 security/smack/smack_access.c                      |   5 +-
 sound/core/memalloc.c                              |   3 +-
 sound/core/oss/pcm_oss.c                           |  22 ++-
 sound/pci/hda/hda_codec.c                          |   2 +-
 sound/pci/hda/hda_sysfs.c                          |   2 +-
 sound/pci/hda/patch_ca0132.c                       |   4 +-
 sound/pci/hda/patch_hdmi.c                         |  98 +++++++--
 sound/pci/hda/patch_realtek.c                      |  46 +++++
 sound/soc/amd/acp-da7219-max98357a.c               |   9 +-
 sound/soc/amd/raven/pci-acp3x.c                    |   4 +
 sound/soc/amd/renoir/rn-pci-acp3x.c                |  32 ++-
 sound/soc/atmel/Kconfig                            |   1 +
 sound/soc/codecs/cros_ec_codec.c                   |   2 +-
 sound/soc/codecs/cx2072x.c                         |   4 +-
 sound/soc/codecs/max98390.c                        |   2 +
 sound/soc/codecs/wm8994.c                          |   6 +-
 sound/soc/codecs/wm8997.c                          |   2 +
 sound/soc/codecs/wm8998.c                          |   4 +-
 sound/soc/codecs/wm_adsp.c                         |   5 +-
 sound/soc/intel/Kconfig                            |   2 +-
 sound/soc/intel/boards/sof_maxim_common.c          |   4 +-
 sound/soc/jz4740/jz4740-i2s.c                      |   4 +
 sound/soc/meson/Kconfig                            |   2 +-
 sound/soc/qcom/Kconfig                             |   1 +
 sound/soc/qcom/common.c                            |  13 +-
 sound/soc/qcom/lpass-hdmi.c                        |   2 +-
 sound/soc/qcom/qdsp6/q6afe-clocks.c                |   1 +
 sound/soc/soc-pcm.c                                |   2 +
 sound/soc/sof/intel/Kconfig                        |   2 +-
 sound/soc/sunxi/sun4i-i2s.c                        |   4 +-
 sound/usb/card.c                                   |   3 +
 sound/usb/clock.c                                  |   6 +
 sound/usb/quirks.c                                 |   1 +
 tools/build/feature/Makefile                       |   2 +-
 tools/lib/bpf/btf.c                                |  16 +-
 tools/lib/bpf/libbpf.c                             |  12 ++
 tools/perf/tests/expand-cgroup.c                   |   2 +-
 tools/perf/tests/pmu-events.c                      |   2 +-
 tools/perf/util/parse-regs-options.c               |   2 +-
 tools/perf/util/probe-file.c                       |  13 +-
 tools/testing/selftests/bpf/Makefile               |   3 +-
 tools/testing/selftests/bpf/progs/local_storage.c  |  24 ++-
 .../testing/selftests/bpf/progs/test_tunnel_kern.c |  42 +---
 tools/testing/selftests/bpf/test_sockmap.c         |  36 ++--
 tools/testing/selftests/bpf/test_tunnel.sh         |  43 +++-
 tools/testing/selftests/run_kselftest.sh           |   2 +-
 tools/testing/selftests/seccomp/config             |   1 +
 724 files changed, 5412 insertions(+), 3411 deletions(-)

From: Guenter Roeck <[email protected]>

commit 0a4e668b5d52eed8026f5d717196b02b55fb2dc6 upstream.

Voltages and current are reported by Zen CPUs. However, the means to do so is undocumented, changes from CPU to CPU, and the raw data is not calibrated. Calibration information is available, but again not documented. This results in less than perfect user experience, up to concerns that loading the driver might possibly damage the hardware (by reporting out-of range voltages). Effectively support for reporting voltages and current is not maintainable. Drop it.

---
 drivers/hwmon/k10temp.c |   98 ------------------------------------------------
 1 file changed, 98 deletions(-)

@@ -11,13 +11,6 @@
  *   convert raw register values is from https://github.com/ocerman/zenpower.
  *   The information is not confirmed from chip datasheets, but experiments
  *   suggest that it provides reasonable temperature values.
- * - Register addresses to read chip voltage and current are also from
- *   https://github.com/ocerman/zenpower, and not confirmed from chip
- *   datasheets. Current calibration is board specific and not typically
- *   shared by board vendors. For this reason, current values are
- *   normalized to report 1A/LSB for core current and and 0.25A/LSB for SoC
- *   current. Reported values can be adjusted using the sensors configuration
- *   file.
  */
 
 #include <linux/bitops.h>

@@ -109,10 +102,7 @@ struct k10temp_data {
 	int temp_offset;
 	u32 temp_adjust_mask;
 	u32 show_temp;
-	u32 svi_addr[2];
 	bool is_zen;
-	bool show_current;
-	int cfactor[2];
 };
 
 #define TCTL_BIT	0

@@ -137,16 +127,6 @@ static const struct tctl_offset tctl_off
 	{ 0x17, "AMD Ryzen Threadripper 29", 27000 }, /* 29{20,50,70,90}[W]X */
 };
 
-static bool is_threadripper(void)
-{
-	return strstr(boot_cpu_data.x86_model_id, "Threadripper");
-}
-
-static bool is_epyc(void)
-{
-	return strstr(boot_cpu_data.x86_model_id, "EPYC");
-}
-
 static void read_htcreg_pci(struct pci_dev *pdev, u32 *regval)
 {
 	pci_read_config_dword(pdev, REG_HARDWARE_THERMAL_CONTROL, regval);

@@ -211,16 +191,6 @@ static const char *k10temp_temp_label[]
 	"Tccd8",
 };
 
-static const char *k10temp_in_label[] = {
-	"Vcore",
-	"Vsoc",
-};
-
-static const char *k10temp_curr_label[] = {
-	"Icore",
-	"Isoc",
-};
-
 static int k10temp_read_labels(struct device *dev,
 			       enum hwmon_sensor_types type,
 			       u32 attr, int channel, const char **str)

@@ -229,50 +199,6 @@ static int k10temp_read_labels(struct de
 	case hwmon_temp:
 		*str = k10temp_temp_label[channel];
 		break;
-	case hwmon_in:
-		*str = k10temp_in_label[channel];
-		break;
-	case hwmon_curr:
-		*str = k10temp_curr_label[channel];
-		break;
-	default:
-		return -EOPNOTSUPP;
-	}
-	return 0;
-}
-
-static int k10temp_read_curr(struct device *dev, u32 attr, int channel,
-			     long *val)
-{
-	struct k10temp_data *data = dev_get_drvdata(dev);
-	u32 regval;
-
-	switch (attr) {
-	case hwmon_curr_input:
-		amd_smn_read(amd_pci_dev_to_node_id(data->pdev),
-			     data->svi_addr[channel], &regval);
-		*val = DIV_ROUND_CLOSEST(data->cfactor[channel] *
-					 (regval & 0xff),
-					 1000);
-		break;
-	default:
-		return -EOPNOTSUPP;
-	}
-	return 0;
-}
-
-static int k10temp_read_in(struct device *dev, u32 attr, int channel, long *val)
-{
-	struct k10temp_data *data = dev_get_drvdata(dev);
-	u32 regval;
-
-	switch (attr) {
-	case hwmon_in_input:
-		amd_smn_read(amd_pci_dev_to_node_id(data->pdev),
-			     data->svi_addr[channel], &regval);
-		regval = (regval >> 16) & 0xff;
-		*val = DIV_ROUND_CLOSEST(155000 - regval * 625, 100);
-		break;
 	default:
 		return -EOPNOTSUPP;
 	}

@@ -331,10 +257,6 @@ static int k10temp_read(struct device *d
 	switch (type) {
 	case hwmon_temp:
 		return k10temp_read_temp(dev, attr, channel, val);
-	case hwmon_in:
-		return k10temp_read_in(dev, attr, channel, val);
-	case hwmon_curr:
-		return k10temp_read_curr(dev, attr, channel, val);
 	default:
 		return -EOPNOTSUPP;
 	}

@@ -383,11 +305,6 @@ static umode_t k10temp_is_visible(const
 			return 0;
 		}
 		break;
-	case hwmon_in:
-	case hwmon_curr:
-		if (!data->show_current)
-			return 0;
-		break;
 	default:
 		return 0;
 	}

@@ -517,20 +434,10 @@ static int k10temp_probe(struct pci_dev
 		case 0x8:	/* Zen+ */
 		case 0x11:	/* Zen APU */
 		case 0x18:	/* Zen+ APU */
-			data->show_current = !is_threadripper() && !is_epyc();
-			data->svi_addr[0] = F17H_M01H_SVI_TEL_PLANE0;
-			data->svi_addr[1] = F17H_M01H_SVI_TEL_PLANE1;
-			data->cfactor[0] = F17H_M01H_CFACTOR_ICORE;
-			data->cfactor[1] = F17H_M01H_CFACTOR_ISOC;
 			k10temp_get_ccd_support(pdev, data, 4);
 			break;
 		case 0x31:	/* Zen2 Threadripper */
 		case 0x71:	/* Zen2 */
-			data->show_current = !is_threadripper() && !is_epyc();
-			data->cfactor[0] = F17H_M31H_CFACTOR_ICORE;
-			data->cfactor[1] = F17H_M31H_CFACTOR_ISOC;
-			data->svi_addr[0] = F17H_M31H_SVI_TEL_PLANE0;
-			data->svi_addr[1] = F17H_M31H_SVI_TEL_PLANE1;
 			k10temp_get_ccd_support(pdev, data, 8);
 			break;
 		}

@@ -542,11 +449,6 @@ static int k10temp_probe(struct pci_dev
 
 		switch (boot_cpu_data.x86_model) {
 		case 0x0 ... 0x1:	/* Zen3 */
-			data->show_current = true;
-			data->svi_addr[0] = F19H_M01_SVI_TEL_PLANE0;
-			data->svi_addr[1] = F19H_M01_SVI_TEL_PLANE1;
-			data->cfactor[0] = F19H_M01H_CFACTOR_ICORE;
-			data->cfactor[1] = F19H_M01H_CFACTOR_ISOC;
 			k10temp_get_ccd_support(pdev, data, 8);
 			break;
 		}

From: Tom Rix <[email protected]>

[ Upstream commit 4e19d51ca5b28a1d435a844c7b2a8e1b1b6fa237 ]

clang static analysis reports this problem:

cdv_intel_dp.c:2101:2: warning: Attempt to free released memory

        kfree(gma_connector);
        ^~~~~~~~~~~~~~~~~~~~

In cdv_intel_dp_init() when the call to cdv_intel_edp_panel_vdd_off() fails, the handler calls cdv_intel_dp_destroy(connector) which does the first free of gma_connector. So adjust the goto label and skip the second free.

---
 drivers/gpu/drm/gma500/cdv_intel_dp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 720a767118c9c..deb4fd13591d2 100644
@@ -2083,7 +2083,7 @@ cdv_intel_dp_init(struct drm_device *dev, struct psb_intel_mode_device *mode_dev
 			DRM_INFO("failed to retrieve link info, disabling eDP\n");
 			drm_encoder_cleanup(encoder);
 			cdv_intel_dp_destroy(connector);
-			goto err_priv;
+			goto err_connector;
 		} else {
         		DRM_DEBUG_KMS("DPCD: Rev=%x LN_Rate=%x LN_CNT=%x LN_DOWNSP=%x\n",
 				intel_dp->dpcd[0], intel_dp->dpcd[1], 

2.27.0

From: Alexandru Ardelean <[email protected]>

[ Upstream commit f091d7c5fe6cc39e916b50f90e3cac67a032d0be ]

This tries to solve a warning reported by the lkp bot:

   static const struct of_device_id at91_adc_dt_ids[] = {
                                    ^

1 warning generated.

This warning has appeared after the AT91_ADC driver compilation has been enabled via the COMPILE_TEST symbol dependency.

The warning is caused by the 'of_match_ptr()' helper which returns NULL if OF is undefined. This driver should build only for device-tree context, so a dependency on the OF Kconfig symbol has been added.
Also, the usage of of_match_ptr() helper has been removed since it shouldn't ever return NULL (because the driver should not be built for the non-OF context).

---
 drivers/iio/adc/Kconfig    | 2 +-
 drivers/iio/adc/at91_adc.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

index 91ae90514aff4..17e9ceb9c6c48 100644
@@ -295,7 +295,7 @@ config ASPEED_ADC
 config AT91_ADC
 	tristate "Atmel AT91 ADC"
 	depends on ARCH_AT91 || COMPILE_TEST
-	depends on INPUT && SYSFS
+	depends on INPUT && SYSFS && OF
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help

index 9b2c548fae957..0a793e7cd53ee 100644
@@ -1469,7 +1469,7 @@ static struct platform_driver at91_adc_driver = {
 	.id_table = at91_adc_ids,
 	.driver = {
 		   .name = DRIVER_NAME,
-		   .of_match_table = of_match_ptr(at91_adc_dt_ids),
+		   .of_match_table = at91_adc_dt_ids,
 		   .pm = &at91_adc_pm_ops,
 	},
 };

2.27.0

From: Randy Dunlap <[email protected]>

[ Upstream commit bf296b35489b46780b73b74ad984d06750ed5479 ]

Kernel test robot reported build errors (undefined references) that didn't make much sense. After reproducing them, there is also a Kconfig warning that is the root cause of the build errors, so fix that Kconfig problem.

Fixes this Kconfig warning:
WARNING: unmet direct dependencies detected for CMA
Depends on [n]: MMU [=n]
Selected by [m]:
- DRM_ASPEED_GFX [=m] && HAS_IOMEM [=y] && DRM [=m] && OF [=y] && (COMPILE_TEST [=y] || ARCH_ASPEED) && HAVE_DMA_CONTIGUOUS [=y]

and these dependent build errors:
(.text+0x10c8c): undefined reference to `start_isolate_page_range'
microblaze-linux-ld: (.text+0x10f14): undefined reference to `test_pages_isolated'
microblaze-linux-ld: (.text+0x10fd0): undefined reference to `undo_isolate_page_range'

---
 drivers/gpu/drm/aspeed/Kconfig | 1 +
 1 file changed, 1 insertion(+)

index 018383cfcfa79..5e95bcea43e92 100644
@@ -3,6 +3,7 @@ config DRM_ASPEED_GFX
 	tristate "ASPEED BMC Display Controller"
 	depends on DRM && OF
 	depends on (COMPILE_TEST || ARCH_ASPEED)
+	depends on MMU
 	select DRM_KMS_HELPER
 	select DRM_KMS_CMA_HELPER
 	select DMA_CMA if HAVE_DMA_CONTIGUOUS

2.27.0

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit e2dae672a9d5e11856fe30ede63467c65f999a81 ]

platform_get_irq() returns -ERRNO on error. In such case comparison to 0 would pass the check.

---
 drivers/gpu/drm/mcde/mcde_drv.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index 92f8bd907193f..210f5e1630081 100644
@@ -331,8 +331,8 @@ static int mcde_probe(struct platform_device *pdev)
 	}
 
 	irq = platform_get_irq(pdev, 0);
-	if (!irq) {
-		ret = -EINVAL;
+	if (irq < 0) {
+		ret = irq;
 		goto clk_disable;
 	}
 

2.27.0

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit 77bb5aaf2bb8180e7d1bb70b4df306f511707a7d ]

platform_get_irq() returns -ERRNO on error. In such case comparison to 0 would pass the check.

---
 drivers/gpu/drm/tve200/tve200_drv.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index c3aa39bd38ecd..b5259cb1383fc 100644
@@ -200,8 +200,8 @@ static int tve200_probe(struct platform_device *pdev)
 	}
 
 	irq = platform_get_irq(pdev, 0);
-	if (!irq) {
-		ret = -EINVAL;
+	if (irq < 0) {
+		ret = irq;
 		goto clk_disable;
 	}
 

2.27.0

From: Biju Das <[email protected]>

[ Upstream commit 67d3dcf12a3d245b6fd6ca5672893f7ae4e137ed ]

HiHope RZG2[HMN] boards uses Realtek phy and the driver does not support rxc-skew-ps property. So remove rxc-skew-ps from ethernet-phy node.

---
 arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi | 1 -
 1 file changed, 1 deletion(-)

index 178401a34cbf8..b9e46aed53362 100644
@@ -23,7 +23,6 @@
 	status = "okay";
 
 	phy0: ethernet-phy@0 {
-		rxc-skew-ps = <1500>;
 		reg = <0>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;

2.27.0

From: Biju Das <[email protected]>

[ Upstream commit 53e573dc39fba1834f3e4fa002cb754b61a30701 ]

The CAT875 sub board from Silicon Linux uses Realtek phy and the driver does not support rxc-skew-ps property.

---
 arch/arm64/boot/dts/renesas/cat875.dtsi | 1 -
 1 file changed, 1 deletion(-)

index 33daa95706840..801ea54b027c4 100644
@@ -21,7 +21,6 @@
 	status = "okay";
 
 	phy0: ethernet-phy@0 {
-		rxc-skew-ps = <1500>;
 		reg = <0>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;

2.27.0

From: Dan Carpenter <[email protected]>

[ Upstream commit cf25d802e029c31efac8bdc979236927f37183bd ]

This code needs to call iounmap() on one error path.

---
 drivers/soc/renesas/rmobile-sysc.c | 1 +
 1 file changed, 1 insertion(+)

index 54b616ad4a62a..beb1c7211c3d6 100644
@@ -327,6 +327,7 @@ static int __init rmobile_init_pm_domains(void)
 
 		pmd = of_get_child_by_name(np, "pm-domains");
 		if (!pmd) {
+			iounmap(base);
 			pr_warn("%pOF lacks pm-domains node\n", np);
 			continue;
 		}

2.27.0

From: Nicolas Boichat <[email protected]>

[ Upstream commit 4007844b05815717f522c7ea9914e24ad0ff6c79 ]

In the error case, where a power domain cannot be powered on successfully at boot time (in mtk_register_power_domains), pm_genpd_init would still be called with is_off=false, and the system would later try to disable the power domain again, triggering warnings as disabled clocks are disabled again (and other potential issues).

Also print a warning splat in that case, as this should never happen.

---
 drivers/soc/mediatek/mtk-scpsys.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

index f669d3754627d..ca75b14931ec9 100644
@@ -524,6 +524,7 @@ static void mtk_register_power_domains(struct platform_device *pdev,
 	for (i = 0; i < num; i++) {
 		struct scp_domain *scpd = &scp->domains[i];
 		struct generic_pm_domain *genpd = &scpd->genpd;
+		bool on;
 
 		/*
 		 * Initially turn on all domains to make the domains usable

@@ -531,9 +532,9 @@ static void mtk_register_power_domains(struct platform_device *pdev,
 		 * software.  The unused domains will be switched off during
 		 * late_init time.
 		 */
-		genpd->power_on(genpd);
+		on = !WARN_ON(genpd->power_on(genpd) < 0);
 
-		pm_genpd_init(genpd, NULL, false);
+		pm_genpd_init(genpd, NULL, !on);
 	}
 
 	/*

2.27.0

From: Fabien Parent <[email protected]>

[ Upstream commit e55c56df43dd11de4a6c08e3ea52ca45b51c8800 ]

The binding documentation says:
- #mbox-cells: Should be 2.
<&phandle channel priority>
phandle: Label name of a gce node.
channel: Channel of mailbox. Be equal to the thread id of GCE.
priority: Priority of GCE thread.

Fix the value of #mbox-cells.

---
 arch/arm64/boot/dts/mediatek/mt8183.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 9cfd961c45eb3..08a914d3a6435 100644
@@ -363,7 +363,7 @@
 			compatible = "mediatek,mt8183-gce";
 			reg = <0 0x10238000 0 0x4000>;
 			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_LOW>;
-			#mbox-cells = <3>;
+			#mbox-cells = <2>;
 			clocks = <&infracfg CLK_INFRA_GCE>;
 			clock-names = "gce";
 		};

2.27.0

From: Kathiravan T <[email protected]>

[ Upstream commit 4af5c6dc255ca64e5263a5254bb7553f05bb682c ]

Memory region reserved for the TZ is changed long back. Let's update the same to align with the corret region. Its size also increased to 4MB from 2MB.

Along with that, bump the Q6 region size to 85MB.

---
 arch/arm64/boot/dts/qcom/ipq6018.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

index 59e0cbfa22143..cdc1e3d60c58e 100644
@@ -156,8 +156,8 @@
 			no-map;
 		};
 
-		tz: tz@48500000 {
-			reg = <0x0 0x48500000 0x0 0x00200000>;
+		tz: memory@4a600000 {
+			reg = <0x0 0x4a600000 0x0 0x00400000>;
 			no-map;
 		};
 

@@ -167,7 +167,7 @@
 		};
 
 		q6_region: memory@4ab00000 {
-			reg = <0x0 0x4ab00000 0x0 0x02800000>;
+			reg = <0x0 0x4ab00000 0x0 0x05500000>;
 			no-map;
 		};
 	};

2.27.0

From: Douglas Anderson <[email protected]>

[ Upstream commit 228813aaa71113d7a12313b87c4905a9d3f9df37 ]

In commit e23b1220a246 ("arm64: dts: qcom: sc7180: Increase the number of interconnect cells") we missed increasing the cells on one interconnect. That's no bueno. Fix it.

NOTE: it appears that things aren't totally broken without this fix, but clearly something isn't going to be working right. If nothing else, without this fix I see this in the logs:

OF: /soc@0/mdss@ae00000: could not get #interconnect-cells for /soc@0/interrupt-controller@17a00000

---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 6678f1e8e3958..a02776ce77a10 100644
@@ -2811,7 +2811,7 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
-			interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>;
+			interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>;
 			interconnect-names = "mdp0-mem";
 
 			iommus = <&apps_smmu 0x800 0x2>;

2.27.0

From: Douglas Anderson <[email protected]>

[ Upstream commit 4b6ea87be44ef34732846fc71e44c41125f0c4fa ]

On geni-i2c transfers using DMA, it was seen that if you program the command (I2C_READ) before calling geni_se_rx_dma_prep() that it could cause interrupts to fire. If we get unlucky, these interrupts can just keep firing (and not be handled) blocking further progress and hanging the system.

In commit 02b9aec59243 ("i2c: i2c-qcom-geni: Fix DMA transfer race") we avoided that by making sure we didn't program the command until after geni_se_rx_dma_prep() was called. While that avoided the problems, it also turns out to be invalid. At least in the TX case we started seeing sporadic corrupted transfers. This is easily seen by adding an msleep() between the DMA prep and the writing of the command, which makes the problem worse. That means we need to revert that commit and find another way to fix the bogus IRQs.

Specifically, after reverting commit 02b9aec59243 ("i2c:
i2c-qcom-geni: Fix DMA transfer race"), I put some traces in. I found that the when the interrupts were firing like crazy:
- "m_stat" had bits for M_RX_IRQ_EN, M_RX_FIFO_WATERMARK_EN set.
- "dma" was set.

Further debugging showed that I could make the problem happen more reliably by adding an "msleep(1)" any time after geni_se_setup_m_cmd() ran up until geni_se_rx_dma_prep() programmed the length.

A rather simple fix is to change geni_se_select_dma_mode() so it's a true inverse of geni_se_select_fifo_mode() and disables all the FIFO related interrupts. Now the problematic interrupts can't fire and we can program things in the correct order without worrying.

As part of this, let's also change the writel_relaxed() in the prepare function to a writel() so that our DMA is guaranteed to be prepared now that we can't rely on geni_se_setup_m_cmd()'s writel().

NOTE: the only current user of GENI_SE_DMA in mainline is i2c.

---
 drivers/soc/qcom/qcom-geni-se.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

index d0e4f520cff8c..751a49f6534f4 100644
@@ -289,10 +289,23 @@ static void geni_se_select_fifo_mode(struct geni_se *se)
 
 static void geni_se_select_dma_mode(struct geni_se *se)
 {
+	u32 proto = geni_se_read_proto(se);
 	u32 val;
 
 	geni_se_irq_clear(se);
 
+	val = readl_relaxed(se->base + SE_GENI_M_IRQ_EN);
+	if (proto != GENI_SE_UART) {
+		val &= ~(M_CMD_DONE_EN | M_TX_FIFO_WATERMARK_EN);
+		val &= ~(M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN);
+	}
+	writel_relaxed(val, se->base + SE_GENI_M_IRQ_EN);
+
+	val = readl_relaxed(se->base + SE_GENI_S_IRQ_EN);
+	if (proto != GENI_SE_UART)
+		val &= ~S_CMD_DONE_EN;
+	writel_relaxed(val, se->base + SE_GENI_S_IRQ_EN);
+
 	val = readl_relaxed(se->base + SE_GENI_DMA_MODE_EN);
 	val |= GENI_DMA_MODE_EN;
 	writel_relaxed(val, se->base + SE_GENI_DMA_MODE_EN);

@@ -651,7 +664,7 @@ int geni_se_tx_dma_prep(struct geni_se *se, void *buf, size_t len,
 	writel_relaxed(lower_32_bits(*iova), se->base + SE_DMA_TX_PTR_L);
 	writel_relaxed(upper_32_bits(*iova), se->base + SE_DMA_TX_PTR_H);
 	writel_relaxed(GENI_SE_DMA_EOT_BUF, se->base + SE_DMA_TX_ATTR);
-	writel_relaxed(len, se->base + SE_DMA_TX_LEN);
+	writel(len, se->base + SE_DMA_TX_LEN);
 	return 0;
 }
 EXPORT_SYMBOL(geni_se_tx_dma_prep);

@@ -688,7 +701,7 @@ int geni_se_rx_dma_prep(struct geni_se *se, void *buf, size_t len,
 	writel_relaxed(upper_32_bits(*iova), se->base + SE_DMA_RX_PTR_H);
 	/* RX does not have EOT buffer type bit. So just reset RX_ATTR */
 	writel_relaxed(0, se->base + SE_DMA_RX_ATTR);
-	writel_relaxed(len, se->base + SE_DMA_RX_LEN);
+	writel(len, se->base + SE_DMA_RX_LEN);
 	return 0;
 }
 EXPORT_SYMBOL(geni_se_rx_dma_prep);

2.27.0

From: Douglas Anderson <[email protected]>

[ Upstream commit 9cb4c67d7717135d6f4600a49ab07b470ea4ee2f ]

This reverts commit 02b9aec59243c6240fc42884acc958602146ddf6.

As talked about in the patch ("soc: qcom: geni: More properly switch to DMA mode"), swapping the order of geni_se_setup_m_cmd() and geni_se_xx_dma_prep() can sometimes cause corrupted transfers. Thus we traded one problem for another. Now that we've debugged the problem further and fixed the geni helper functions to more disable FIFO interrupts when we move to DMA mode we can revert it and end up with (hopefully) zero problems!

To be explicit, the patch ("soc: qcom: geni: More properly switch to DMA mode") is a prerequisite for this one.

---
 drivers/i2c/busses/i2c-qcom-geni.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

index 8b4c35f47a70f..dce75b85253c1 100644
@@ -366,6 +366,7 @@ static int geni_i2c_rx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
 		geni_se_select_mode(se, GENI_SE_FIFO);
 
 	writel_relaxed(len, se->base + SE_I2C_RX_TRANS_LEN);
+	geni_se_setup_m_cmd(se, I2C_READ, m_param);
 
 	if (dma_buf && geni_se_rx_dma_prep(se, dma_buf, len, &rx_dma)) {
 		geni_se_select_mode(se, GENI_SE_FIFO);

@@ -373,8 +374,6 @@ static int geni_i2c_rx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
 		dma_buf = NULL;
 	}
 
-	geni_se_setup_m_cmd(se, I2C_READ, m_param);
-
 	time_left = wait_for_completion_timeout(&gi2c->done, XFER_TIMEOUT);
 	if (!time_left)
 		geni_i2c_abort_xfer(gi2c);

@@ -408,6 +407,7 @@ static int geni_i2c_tx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
 		geni_se_select_mode(se, GENI_SE_FIFO);
 
 	writel_relaxed(len, se->base + SE_I2C_TX_TRANS_LEN);
+	geni_se_setup_m_cmd(se, I2C_WRITE, m_param);
 
 	if (dma_buf && geni_se_tx_dma_prep(se, dma_buf, len, &tx_dma)) {
 		geni_se_select_mode(se, GENI_SE_FIFO);

@@ -415,8 +415,6 @@ static int geni_i2c_tx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
 		dma_buf = NULL;
 	}
 
-	geni_se_setup_m_cmd(se, I2C_WRITE, m_param);
-
 	if (!dma_buf) /* Get FIFO IRQ */
 		writel_relaxed(1, se->base + SE_GENI_TX_WATERMARK_REG);
 

2.27.0

From: Kamal Heib <[email protected]>

[ Upstream commit 53839b51a7671eeb3fb44d479d541cf3a0f2dd45 ]

The API for ib_query_qp requires the driver to set cur_qp_state on return, add the missing set.

---
 drivers/infiniband/hw/bnxt_re/ib_verbs.c | 1 +
 1 file changed, 1 insertion(+)

index cf3db96283976..f9c999d5ba28e 100644
@@ -2078,6 +2078,7 @@ int bnxt_re_query_qp(struct ib_qp *ib_qp, struct ib_qp_attr *qp_attr,
 		goto out;
 	}
 	qp_attr->qp_state = __to_ib_qp_state(qplib_qp->state);
+	qp_attr->cur_qp_state = __to_ib_qp_state(qplib_qp->cur_qp_state);
 	qp_attr->en_sqd_async_notify = qplib_qp->en_sqd_async_notify ? 1 : 0;
 	qp_attr->qp_access_flags = __to_ib_access_flags(qplib_qp->access);
 	qp_attr->pkey_index = qplib_qp->pkey_index;

2.27.0

From: Dan Carpenter <[email protected]>

[ Upstream commit ba1c30bf3f2536f248d262c6f257b5a787305991 ]

These functions should return zero on success. Non-zero returns are treated as error. On some paths, this doesn't matter but in nvmem_cell_read() a non-zero return would be passed to ERR_PTR() and lead to an Oops.

---
 drivers/rtc/rtc-pcf2127.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

index 07a5630ec841f..4d9711d51f8f3 100644
@@ -243,10 +243,8 @@ static int pcf2127_nvmem_read(void *priv, unsigned int offset,
 	if (ret)
 		return ret;
 
-	ret = regmap_bulk_read(pcf2127->regmap, PCF2127_REG_RAM_RD_CMD,
-			       val, bytes);
-
-	return ret ?: bytes;
+	return regmap_bulk_read(pcf2127->regmap, PCF2127_REG_RAM_RD_CMD,
+				val, bytes);
 }
 
 static int pcf2127_nvmem_write(void *priv, unsigned int offset,

@@ -261,10 +259,8 @@ static int pcf2127_nvmem_write(void *priv, unsigned int offset,
 	if (ret)
 		return ret;
 
-	ret = regmap_bulk_write(pcf2127->regmap, PCF2127_REG_RAM_WRT_CMD,
-				val, bytes);
-
-	return ret ?: bytes;
+	return regmap_bulk_write(pcf2127->regmap, PCF2127_REG_RAM_WRT_CMD,
+				 val, bytes);
 }
 
 /* watchdog driver */

2.27.0

From: Selvin Xavier <[email protected]>

[ Upstream commit b898d5c50cab1f985e77d053eb5c4d2c4a7694ae ]

Only static WQE is supported for SRQ. So always use the max supported SGEs while calculating SRQ entry size.

---
 drivers/infiniband/hw/bnxt_re/ib_verbs.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index f9c999d5ba28e..266de55f57192 100644
@@ -1657,8 +1657,8 @@ int bnxt_re_create_srq(struct ib_srq *ib_srq,
 	srq->qplib_srq.max_wqe = entries;
 
 	srq->qplib_srq.max_sge = srq_init_attr->attr.max_sge;
-	srq->qplib_srq.wqe_size =
-			bnxt_re_get_rwqe_size(srq->qplib_srq.max_sge);
+	 /* 128 byte wqe size for SRQ . So use max sges */
+	srq->qplib_srq.wqe_size = bnxt_re_get_rwqe_size(dev_attr->max_srq_sges);
 	srq->qplib_srq.threshold = srq_init_attr->attr.srq_limit;
 	srq->srq_limit = srq_init_attr->attr.srq_limit;
 	srq->qplib_srq.eventq_hw_ring_id = rdev->nq[0].ring_id;

2.27.0

From: Tianyue Ren <[email protected]>

[ Upstream commit 83370b31a915493231e5b9addc72e4bef69f8d31 ]

Mark the inode security label as invalid if we cannot find a dentry so that we will retry later rather than marking it initialized with the unlabeled SID.

---
 security/selinux/hooks.c | 19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)

index 6b1826fc3658e..158fc47d8620d 100644
@@ -1451,7 +1451,13 @@ static int inode_doinit_with_dentry(struct inode *inode, struct dentry *opt_dent
 			 * inode_doinit with a dentry, before these inodes could
 			 * be used again by userspace.
 			 */
-			goto out;
+			isec->initialized = LABEL_INVALID;
+			/*
+			 * There is nothing useful to jump to the "out"
+			 * label, except a needless spin lock/unlock
+			 * cycle.
+			 */
+			return 0;
 		}
 
 		rc = inode_doinit_use_xattr(inode, dentry, sbsec->def_sid,

@@ -1507,8 +1513,15 @@ static int inode_doinit_with_dentry(struct inode *inode, struct dentry *opt_dent
 			 * inode_doinit() with a dentry, before these inodes
 			 * could be used again by userspace.
 			 */
-			if (!dentry)
-				goto out;
+			if (!dentry) {
+				isec->initialized = LABEL_INVALID;
+				/*
+				 * There is nothing useful to jump to the "out"
+				 * label, except a needless spin lock/unlock
+				 * cycle.
+				 */
+				return 0;
+			}
 			rc = selinux_genfs_get_sid(dentry, sclass,
 						   sbsec->flags, &sid);
 			if (rc) {

2.27.0

From: Billy Tsai <[email protected]>

[ Upstream commit 886f82ce9f1f4559c139fdb2d79d158999ca38cd ]

The GPIO controller is a GPIO controller followed by some SGPIO controllers, which are a different type of device with their own binding and drivers.

Make the gpio node cover the only conventional GPIO controller.

---
 arch/arm/boot/dts/aspeed-g6.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index b58220a49cbd8..bf97aaad7be9b 100644
@@ -357,7 +357,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				compatible = "aspeed,ast2600-gpio";
-				reg = <0x1e780000 0x800>;
+				reg = <0x1e780000 0x400>;
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 				gpio-ranges = <&pinctrl 0 0 208>;
 				ngpios = <208>;

2.27.0

From: Joel Stanley <[email protected]>

[ Upstream commit 9e1cc9679776f5b9e42481d392b1550753ebd084 ]

The VGA memory region is always from the top of RAM. On this board, that is 0x80000000 + 0x20000000 - 0x01000000 = 0x9f000000.

This was not an issue in practice as the region is "reserved" by the vendor's u-boot reducing the amount of available RAM, and the only user is the host VGA device poking at RAM over PCIe. That is, nothing from the ARM touches it.

It is worth fixing as developers copy existing device trees when building their machines, and the XDMA driver does use the memory region from the ARM side.

---
 arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index 1deb30ec912cf..6e9baf3bba531 100644
@@ -22,9 +22,9 @@
 		#size-cells = <1>;
 		ranges;
 
-		vga_memory: framebuffer@7f000000 {
+		vga_memory: framebuffer@9f000000 {
 			no-map;
-			reg = <0x7f000000 0x01000000>;
+			reg = <0x9f000000 0x01000000>; /* 16M */
 		};
 	};
 

2.27.0

From: Jing Xiangfeng <[email protected]>

[ Upstream commit 5333499c6014224756e97fa1a1047dfa592d76d3 ]

Fix to return error code PTR_ERR() from the error handling case instead of 0.

---
 drivers/infiniband/core/verbs.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

index 740f8454b6b46..3d895cc41c3ad 100644
@@ -1698,8 +1698,10 @@ static int _ib_modify_qp(struct ib_qp *qp, struct ib_qp_attr *attr,
 			slave = rdma_lag_get_ah_roce_slave(qp->device,
 							   &attr->ah_attr,
 							   GFP_KERNEL);
-			if (IS_ERR(slave))
+			if (IS_ERR(slave)) {
+				ret = PTR_ERR(slave);
 				goto out_av;
+			}
 			attr->xmit_slave = slave;
 		}
 	}

2.27.0

From: Bob Pearson <[email protected]>

[ Upstream commit bb3ab2979fd69db23328691cb10067861df89037 ]

The code which limited the number of unacknowledged PSNs was incorrect. The PSNs are limited to 24 bits and wrap back to zero from 0x00ffffff. The test was computing a 32 bit value which wraps at 32 bits so that qp->req.psn can appear smaller than the limit when it is actually larger.

Replace '>' test with psn_compare which is used for other PSN comparisons and correctly handles the 24 bit size.

---
 drivers/infiniband/sw/rxe/rxe_req.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

index af3923bf0a36b..d4917646641aa 100644
@@ -634,7 +634,8 @@ next_wqe:
 	}
 
 	if (unlikely(qp_type(qp) == IB_QPT_RC &&
-		     qp->req.psn > (qp->comp.psn + RXE_MAX_UNACKED_PSNS))) {
+		psn_compare(qp->req.psn, (qp->comp.psn +
+				RXE_MAX_UNACKED_PSNS)) > 0)) {
 		qp->req.wait_psn = 1;
 		goto exit;
 	}

2.27.0

From: Arvind Sankar <[email protected]>

[ Upstream commit 1fcd009102ee02e217f2e7635ab65517d785da8e ]

Commit

ea3b5e60ce80 ("x86/mm/ident_map: Add 5-level paging support")

added ident_p4d_init() to support 5-level paging, but this function doesn't check and return errors from ident_pud_init().

For example, the decompressor stub uses this code to create an identity mapping. If it runs out of pages while trying to allocate a PMD pagetable, the error will be currently ignored.

Fix this to propagate errors.

[ bp: Space out statements for better readability. ]

---
 arch/x86/mm/ident_map.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

index fe7a12599d8eb..968d7005f4a72 100644
@@ -62,6 +62,7 @@ static int ident_p4d_init(struct x86_mapping_info *info, p4d_t *p4d_page,
 			  unsigned long addr, unsigned long end)
 {
 	unsigned long next;
+	int result;
 
 	for (; addr < end; addr = next) {
 		p4d_t *p4d = p4d_page + p4d_index(addr);

@@ -73,13 +74,20 @@ static int ident_p4d_init(struct x86_mapping_info *info, p4d_t *p4d_page,
 
 		if (p4d_present(*p4d)) {
 			pud = pud_offset(p4d, 0);
-			ident_pud_init(info, pud, addr, next);
+			result = ident_pud_init(info, pud, addr, next);
+			if (result)
+				return result;
+
 			continue;
 		}
 		pud = (pud_t *)info->alloc_pgt_page(info->context);
 		if (!pud)
 			return -ENOMEM;
-		ident_pud_init(info, pud, addr, next);
+
+		result = ident_pud_init(info, pud, addr, next);
+		if (result)
+			return result;
+
 		set_p4d(p4d, __p4d(__pa(pud) | info->kernpg_flag));
 	}
 

2.27.0

From: Ard Biesheuvel <[email protected]>

[ Upstream commit 4e79f0211b473f8e1eab8211a9fd50cc41a3a061 ]

When running in BE mode on LPAE hardware with a PA-to-VA translation that exceeds 4 GB, we patch bits 39:32 of the offset into the wrong byte of the opcode. So fix that, by rotating the offset in r0 to the right by 8 bits, which will put the 8-bit immediate in bits 31:24.

Note that this will also move bit #22 in its correct place when applying the rotation to the constant #0x400000.

---
 arch/arm/kernel/head.S | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

index f8904227e7fdc..98c1e68bdfcbb 100644
@@ -671,12 +671,8 @@ ARM_BE8(rev16	ip, ip)
 	ldrcc	r7, [r4], #4	@ use branch for delay slot
 	bcc	1b
 	bx	lr
-#else
-#ifdef CONFIG_CPU_ENDIAN_BE8
-	moveq	r0, #0x00004000	@ set bit 22, mov to mvn instruction
 #else
 	moveq	r0, #0x400000	@ set bit 22, mov to mvn instruction
-#endif
 	b	2f
 1:	ldr	ip, [r7, r3]
 #ifdef CONFIG_CPU_ENDIAN_BE8

@@ -685,7 +681,7 @@ ARM_BE8(rev16	ip, ip)
 	tst	ip, #0x000f0000	@ check the rotation field
 	orrne	ip, ip, r6, lsl #24 @ mask in offset bits 31-24
 	biceq	ip, ip, #0x00004000 @ clear bit 22
-	orreq	ip, ip, r0      @ mask in offset bits 7-0
+	orreq	ip, ip, r0, ror #8  @ mask in offset bits 7-0
 #else
 	bic	ip, ip, #0x000000ff
 	tst	ip, #0xf00	@ check the rotation field

2.27.0

From: Danil Kipnis <[email protected]>

[ Upstream commit 2b3062e4d997f201c1ad2bbde88b7271dd9ef35f ]

We call destroy_con_cq_qp(con) in rtrs_rdma_addr_resolved() in case route couldn't be resolved and then again in create_cm() because nothing happens.

Don't call destroy_con_cq_qp from rtrs_rdma_addr_resolved, create_cm() does the clean up already.

---
 drivers/infiniband/ulp/rtrs/rtrs-clt.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

index f298adc02acba..3cc957fea93ee 100644
@@ -1640,10 +1640,8 @@ static int rtrs_rdma_addr_resolved(struct rtrs_clt_con *con)
 		return err;
 	}
 	err = rdma_resolve_route(con->c.cm_id, RTRS_CONNECT_TIMEOUT_MS);
-	if (err) {
+	if (err)
 		rtrs_err(s, "Resolving route failed, err: %d\n", err);
-		destroy_con_cq_qp(con);
-	}
 
 	return err;
 }

2.27.0

From: Gioh Kim <[email protected]>

[ Upstream commit f553e7601df9566ba7644541fc09152a3a81f793 ]

When rtrs_rdma_conn_established returns error (non-zero value), the error value is stored in con->cm_err and it cannot trigger rtrs_rdma_error_recovery. Finally the error of rtrs_rdma_con_established will be forgot.

---
 drivers/infiniband/ulp/rtrs/rtrs-clt.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index 3cc957fea93ee..d54a77ebe1184 100644
@@ -1835,8 +1835,8 @@ static int rtrs_clt_rdma_cm_handler(struct rdma_cm_id *cm_id,
 		cm_err = rtrs_rdma_route_resolved(con);
 		break;
 	case RDMA_CM_EVENT_ESTABLISHED:
-		con->cm_err = rtrs_rdma_conn_established(con, ev);
-		if (likely(!con->cm_err)) {
+		cm_err = rtrs_rdma_conn_established(con, ev);
+		if (likely(!cm_err)) {
 			/*
 			 * Report success and wake up. Here we abuse state_wq,
 			 * i.e. wake up without state change, but we set cm_err.

2.27.0

From: Guoqing Jiang <[email protected]>

[ Upstream commit d715ff8acbd5876549ef2b21b755ed919f40dcc1 ]

The purpose of srv_mutex is to protect srv_list as in put_srv, so no need to hold it when allocate memory for srv since it could be time consuming.

Otherwise if one machine has limited memory, rsrv_close_work could be blocked for a longer time due to the mutex is held by get_or_create_srv since it can't get memory in time.

  INFO: task kworker/1:1:27478 blocked for more than 120 seconds.
        Tainted: G           O    4.14.171-1-storage #4.14.171-1.3~deb9
  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  kworker/1:1     D    0 27478      2 0x80000000
  Workqueue: rtrs_server_wq rtrs_srv_close_work [rtrs_server]
  Call Trace:
   ? __schedule+0x38c/0x7e0
   schedule+0x32/0x80
   schedule_preempt_disabled+0xa/0x10
   __mutex_lock.isra.2+0x25e/0x4d0
   ? put_srv+0x44/0x100 [rtrs_server]
   put_srv+0x44/0x100 [rtrs_server]
   rtrs_srv_close_work+0x16c/0x280 [rtrs_server]
   process_one_work+0x1c5/0x3c0
   worker_thread+0x47/0x3e0
   kthread+0xfc/0x130
   ? trace_event_raw_event_workqueue_execute_start+0xa0/0xa0
   ? kthread_create_on_node+0x70/0x70
   ret_from_fork+0x1f/0x30

Let's move all the logics from __find_srv_and_get and __alloc_srv to get_or_create_srv, and remove the two functions. Then it should be safe for multiple processes to access the same srv since it is protected with srv_mutex.

And since we don't want to allocate chunks with srv_mutex held, let's check the srv->refcount after get srv because the chunks could not be allocated yet.

---
 drivers/infiniband/ulp/rtrs/rtrs-srv.c | 86 +++++++++++---------------
 1 file changed, 37 insertions(+), 49 deletions(-)

index d6f93601712e4..1cb778aff3c59 100644
@@ -1328,17 +1328,42 @@ static void rtrs_srv_dev_release(struct device *dev)
 	kfree(srv);
 }
 
-static struct rtrs_srv *__alloc_srv(struct rtrs_srv_ctx *ctx,
-				     const uuid_t *paths_uuid)
+static void free_srv(struct rtrs_srv *srv)
+{
+	int i;
+
+	WARN_ON(refcount_read(&srv->refcount));
+	for (i = 0; i < srv->queue_depth; i++)
+		mempool_free(srv->chunks[i], chunk_pool);
+	kfree(srv->chunks);
+	mutex_destroy(&srv->paths_mutex);
+	mutex_destroy(&srv->paths_ev_mutex);
+	/* last put to release the srv structure */
+	put_device(&srv->dev);
+}
+
+static struct rtrs_srv *get_or_create_srv(struct rtrs_srv_ctx *ctx,
+					   const uuid_t *paths_uuid)
 {
 	struct rtrs_srv *srv;
 	int i;
 
+	mutex_lock(&ctx->srv_mutex);
+	list_for_each_entry(srv, &ctx->srv_list, ctx_list) {
+		if (uuid_equal(&srv->paths_uuid, paths_uuid) &&
+		    refcount_inc_not_zero(&srv->refcount)) {
+			mutex_unlock(&ctx->srv_mutex);
+			return srv;
+		}
+	}
+
+	/* need to allocate a new srv */
 	srv = kzalloc(sizeof(*srv), GFP_KERNEL);
-	if  (!srv)
+	if  (!srv) {
+		mutex_unlock(&ctx->srv_mutex);
 		return NULL;
+	}
 
-	refcount_set(&srv->refcount, 1);
 	INIT_LIST_HEAD(&srv->paths_list);
 	mutex_init(&srv->paths_mutex);
 	mutex_init(&srv->paths_ev_mutex);

@@ -1347,6 +1372,8 @@ static struct rtrs_srv *__alloc_srv(struct rtrs_srv_ctx *ctx,
 	srv->ctx = ctx;
 	device_initialize(&srv->dev);
 	srv->dev.release = rtrs_srv_dev_release;
+	list_add(&srv->ctx_list, &ctx->srv_list);
+	mutex_unlock(&ctx->srv_mutex);
 
 	srv->chunks = kcalloc(srv->queue_depth, sizeof(*srv->chunks),
 			      GFP_KERNEL);

@@ -1358,7 +1385,7 @@ static struct rtrs_srv *__alloc_srv(struct rtrs_srv_ctx *ctx,
 		if (!srv->chunks[i])
 			goto err_free_chunks;
 	}
-	list_add(&srv->ctx_list, &ctx->srv_list);
+	refcount_set(&srv->refcount, 1);
 
 	return srv;
 

@@ -1369,52 +1396,9 @@ err_free_chunks:
 
 err_free_srv:
 	kfree(srv);
-
 	return NULL;
 }
 
-static void free_srv(struct rtrs_srv *srv)
-{
-	int i;
-
-	WARN_ON(refcount_read(&srv->refcount));
-	for (i = 0; i < srv->queue_depth; i++)
-		mempool_free(srv->chunks[i], chunk_pool);
-	kfree(srv->chunks);
-	mutex_destroy(&srv->paths_mutex);
-	mutex_destroy(&srv->paths_ev_mutex);
-	/* last put to release the srv structure */
-	put_device(&srv->dev);
-}
-
-static inline struct rtrs_srv *__find_srv_and_get(struct rtrs_srv_ctx *ctx,
-						   const uuid_t *paths_uuid)
-{
-	struct rtrs_srv *srv;
-
-	list_for_each_entry(srv, &ctx->srv_list, ctx_list) {
-		if (uuid_equal(&srv->paths_uuid, paths_uuid) &&
-		    refcount_inc_not_zero(&srv->refcount))
-			return srv;
-	}
-
-	return NULL;
-}
-
-static struct rtrs_srv *get_or_create_srv(struct rtrs_srv_ctx *ctx,
-					   const uuid_t *paths_uuid)
-{
-	struct rtrs_srv *srv;
-
-	mutex_lock(&ctx->srv_mutex);
-	srv = __find_srv_and_get(ctx, paths_uuid);
-	if (!srv)
-		srv = __alloc_srv(ctx, paths_uuid);
-	mutex_unlock(&ctx->srv_mutex);
-
-	return srv;
-}
-
 static void put_srv(struct rtrs_srv *srv)
 {
 	if (refcount_dec_and_test(&srv->refcount)) {

@@ -1813,7 +1797,11 @@ static int rtrs_rdma_connect(struct rdma_cm_id *cm_id,
 	}
 	recon_cnt = le16_to_cpu(msg->recon_cnt);
 	srv = get_or_create_srv(ctx, &msg->paths_uuid);
-	if (!srv) {
+	/*
+	 * "refcount == 0" happens if a previous thread calls get_or_create_srv
+	 * allocate srv, but chunks of srv are not allocated yet.
+	 */
+	if (!srv || refcount_read(&srv->refcount) == 0) {
 		err = -ENOMEM;
 		goto reject_w_err;
 	}

2.27.0

From: David Woodhouse <[email protected]>

[ Upstream commit 26573a97746c7a99f394f9d398ce91a8853b3b89 ]

Currently, Linux as a hypervisor guest will enable x2apic only if there are no CPUs present at boot time with an APIC ID above 255.

Hotplugging a CPU later with a higher APIC ID would result in a CPU which cannot be targeted by external interrupts.

Add a filter in x2apic_apic_id_valid() which can be used to prevent such CPUs from coming online, and allow x2apic to be enabled even if they are present at boot time.

---
 arch/x86/include/asm/apic.h        |  1 +
 arch/x86/kernel/apic/apic.c        | 14 ++++++++------
 arch/x86/kernel/apic/x2apic_phys.c |  9 +++++++++
 3 files changed, 18 insertions(+), 6 deletions(-)

index 4e3099d9ae625..57af25cb44f63 100644
@@ -259,6 +259,7 @@ static inline u64 native_x2apic_icr_read(void)
 
 extern int x2apic_mode;
 extern int x2apic_phys;
+extern void __init x2apic_set_max_apicid(u32 apicid);
 extern void __init check_x2apic(void);
 extern void x2apic_setup(void);
 static inline int x2apic_enabled(void)

index b3eef1d5c9037..113f6ca7b8284 100644
@@ -1841,20 +1841,22 @@ static __init void try_to_enable_x2apic(int remap_mode)
 		return;
 
 	if (remap_mode != IRQ_REMAP_X2APIC_MODE) {
-		/* IR is required if there is APIC ID > 255 even when running
-		 * under KVM
+		/*
+		 * Using X2APIC without IR is not architecturally supported
+		 * on bare metal but may be supported in guests.
 		 */
-		if (max_physical_apicid > 255 ||
-		    !x86_init.hyper.x2apic_available()) {
+		if (!x86_init.hyper.x2apic_available()) {
 			pr_info("x2apic: IRQ remapping doesn't support X2APIC mode\n");
 			x2apic_disable();
 			return;
 		}
 
 		/*
-		 * without IR all CPUs can be addressed by IOAPIC/MSI
-		 * only in physical mode
+		 * Without IR, all CPUs can be addressed by IOAPIC/MSI only
+		 * in physical mode, and CPUs with an APIC ID that cannnot
+		 * be addressed must not be brought online.
 		 */
+		x2apic_set_max_apicid(255);
 		x2apic_phys = 1;
 	}
 	x2apic_enable();

index bc9693841353c..e14eae6d6ea71 100644
@@ -8,6 +8,12 @@
 int x2apic_phys;
 
 static struct apic apic_x2apic_phys;
+static u32 x2apic_max_apicid __ro_after_init;
+
+void __init x2apic_set_max_apicid(u32 apicid)
+{
+	x2apic_max_apicid = apicid;
+}
 
 static int __init set_x2apic_phys_mode(char *arg)
 {

@@ -98,6 +104,9 @@ static int x2apic_phys_probe(void)
 /* Common x2apic functions, also used by x2apic_cluster */
 int x2apic_apic_id_valid(u32 apicid)
 {
+	if (x2apic_max_apicid && apicid > x2apic_max_apicid)
+		return 0;
+
 	return 1;
 }
 

2.27.0

From: Colin Ian King <[email protected]>

[ Upstream commit bcc96dc3cf8048c80af7c487af17e19be27ac57d ]

The check for an error return from the call to snd_pcm_format_width is never true as the unsigned int bitwidth can never be less than zero. Fix this by making bitwidth an int.

---
 sound/soc/qcom/lpass-hdmi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 172952d3a5d66..abfb8737a89f4 100644
@@ -24,7 +24,7 @@ static int lpass_hdmi_daiops_hw_params(struct snd_pcm_substream *substream,
 	unsigned int rate = params_rate(params);
 	unsigned int channels = params_channels(params);
 	unsigned int ret;
-	unsigned int bitwidth;
+	int bitwidth;
 	unsigned int word_length;
 	unsigned int ch_sts_buf0;
 	unsigned int ch_sts_buf1;

2.27.0

From: Peng Liu <[email protected]>

[ Upstream commit a57415f5d1e43c3a5c5d412cd85e2792d7ed9b11 ]

When change sched_rt_{runtime, period}_us, we validate that the new settings should at least accommodate the currently allocated -dl bandwidth:

sched_rt_handler()

    -->	sched_dl_bandwidth_validate()
	{
		new_bw = global_rt_runtime()/global_rt_period();

		for_each_possible_cpu(cpu) {
			dl_b = dl_bw_of(cpu);
			if (new_bw < dl_b->total_bw)    <-------
				ret = -EBUSY;
		}
	}

But under CONFIG_SMP, dl_bw is per root domain , but not per CPU, dl_b->total_bw is the allocated bandwidth of the whole root domain. Instead, we should compare dl_b->total_bw against "cpus*new_bw", where 'cpus' is the number of CPUs of the root domain.

Also, below annotation(in kernel/sched/sched.h) implied implementation only appeared in SCHED_DEADLINE v2[1], then deadline scheduler kept evolving till got merged(v9), but the annotation remains unchanged, meaningless and misleading, update it.

* With respect to SMP, the bandwidth is given on a per-CPU basis,
* meaning that:
* - dl_bw (< 100%) is the bandwidth of the system (group) on each CPU;
* - dl_total_bw array contains, in the i-eth element, the currently
* allocated bandwidth on the i-eth CPU.

[1]: https://lore.kernel.org/lkml/1267385230.13676.101.camel@Palantir/

---
 kernel/sched/deadline.c |  5 +++--
 kernel/sched/sched.h    | 42 ++++++++++++++++++-----------------------
 2 files changed, 21 insertions(+), 26 deletions(-)

index 1d3c97268ec0d..8d06d1f4e2f7b 100644
@@ -2547,7 +2547,7 @@ int sched_dl_global_validate(void)
 	u64 period = global_rt_period();
 	u64 new_bw = to_ratio(period, runtime);
 	struct dl_bw *dl_b;
-	int cpu, ret = 0;
+	int cpu, cpus, ret = 0;
 	unsigned long flags;
 
 	/*

@@ -2562,9 +2562,10 @@ int sched_dl_global_validate(void)
 	for_each_possible_cpu(cpu) {
 		rcu_read_lock_sched();
 		dl_b = dl_bw_of(cpu);
+		cpus = dl_bw_cpus(cpu);
 
 		raw_spin_lock_irqsave(&dl_b->lock, flags);
-		if (new_bw < dl_b->total_bw)
+		if (new_bw * cpus < dl_b->total_bw)
 			ret = -EBUSY;
 		raw_spin_unlock_irqrestore(&dl_b->lock, flags);
 

2.27.0

From: Thomas Gleixner <[email protected]>

[ Upstream commit 345a957fcc95630bf5535d7668a59ed983eb49a7 ]

do_sched_yield() invokes schedule() with interrupts disabled which is not allowed. This goes back to the pre git era to commit a6efb709806c ("[PATCH] irqlock patch 2.5.27-H6") in the history tree.

Reenable interrupts and remove the misleading comment which "explains" it.

---
 kernel/sched/core.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

index e7e453492cffc..77aa0e788b9b7 100644
@@ -6100,12 +6100,8 @@ static void do_sched_yield(void)
 	schedstat_inc(rq->yld_count);
 	current->sched_class->yield_task(rq);
 
-	/*
-	 * Since we are going to call schedule() anyway, there's
-	 * no need to preempt or enable interrupts:
-	 */
 	preempt_disable();
-	rq_unlock(rq, &rf);
+	rq_unlock_irq(rq, &rf);
 	sched_preempt_enable_no_resched();
 
 	schedule();

2.27.0

From: Arnd Bergmann <[email protected]>

[ Upstream commit a110f3750bf8b93764f13bd1402c7cba03d15d61 ]

core_link_write_dpcd() returns enum dc_status, not ddc_result:

display/dc/core/dc_link_dp.c: In function 'dp_set_panel_mode':
display/dc/core/dc_link_dp.c:4237:11: warning: implicit conversion from 'enum dc_status' to 'enum ddc_result' [-Wenum-conversion]

Avoid the warning by using the correct enum in the caller.

---
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index ff1e9963ec7a2..98464886341f6 100644
@@ -4230,7 +4230,7 @@ void dp_set_panel_mode(struct dc_link *link, enum dp_panel_mode panel_mode)
 
 		if (edp_config_set.bits.PANEL_MODE_EDP
 			!= panel_mode_edp) {
-			enum ddc_result result = DDC_RESULT_UNKNOWN;
+			enum dc_status result = DC_ERROR_UNEXPECTED;
 
 			edp_config_set.bits.PANEL_MODE_EDP =
 			panel_mode_edp;

@@ -4240,7 +4240,7 @@ void dp_set_panel_mode(struct dc_link *link, enum dp_panel_mode panel_mode)
 				&edp_config_set.raw,
 				sizeof(edp_config_set.raw));
 
-			ASSERT(result == DDC_RESULT_SUCESSFULL);
+			ASSERT(result == DC_OK);
 		}
 	}
 	DC_LOG_DETECTION_DP_CAPS("Link: %d eDP panel mode supported: %d "

2.27.0

From: Christophe Leroy <[email protected]>

[ Upstream commit 195404db27f9533c71fdcb78d32a77075c2cb4a2 ]

current_desc_hdr() compares the value of the current descriptor with the next_desc member of the talitos_desc struct.

While the current descriptor is obtained from in_be32() which return CPU ordered bytes, next_desc member is in big endian order.

Convert the current descriptor into big endian before comparing it with next_desc.

This fixes a sparse warning.

---
 drivers/crypto/talitos.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index 66773892f665d..1de6b01381268 100644
@@ -478,7 +478,7 @@ static u32 current_desc_hdr(struct device *dev, int ch)
 
 	iter = tail;
 	while (priv->chan[ch].fifo[iter].dma_desc != cur_desc &&
-	       priv->chan[ch].fifo[iter].desc->next_desc != cur_desc) {
+	       priv->chan[ch].fifo[iter].desc->next_desc != cpu_to_be32(cur_desc)) {
 		iter = (iter + 1) & (priv->fifo_len - 1);
 		if (iter == tail) {
 			dev_err(dev, "couldn't locate current descriptor\n");

@@ -486,7 +486,7 @@ static u32 current_desc_hdr(struct device *dev, int ch)
 		}
 	}
 
-	if (priv->chan[ch].fifo[iter].desc->next_desc == cur_desc) {
+	if (priv->chan[ch].fifo[iter].desc->next_desc == cpu_to_be32(cur_desc)) {
 		struct talitos_edesc *edesc;
 
 		edesc = container_of(priv->chan[ch].fifo[iter].desc,

2.27.0

From: Christophe Leroy <[email protected]>

[ Upstream commit 0237616173fd363a54bd272aa3bd376faa1d7caa ]

current_desc_hdr() returns a u32 but in fact this is a __be32, leading to a lot of sparse warnings.

Change the return type to __be32 and ensure it is handled as sure by the caller.

---
 drivers/crypto/talitos.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

index 1de6b01381268..a713a35dc5022 100644
@@ -460,7 +460,7 @@ DEF_TALITOS2_DONE(ch1_3, TALITOS2_ISR_CH_1_3_DONE)
 /*
  * locate current (offending) descriptor
  */
-static u32 current_desc_hdr(struct device *dev, int ch)
+static __be32 current_desc_hdr(struct device *dev, int ch)
 {
 	struct talitos_private *priv = dev_get_drvdata(dev);
 	int tail, iter;

@@ -501,13 +501,13 @@ static u32 current_desc_hdr(struct device *dev, int ch)
 /*
  * user diagnostics; report root cause of error based on execution unit status
  */
-static void report_eu_error(struct device *dev, int ch, u32 desc_hdr)
+static void report_eu_error(struct device *dev, int ch, __be32 desc_hdr)
 {
 	struct talitos_private *priv = dev_get_drvdata(dev);
 	int i;
 
 	if (!desc_hdr)
-		desc_hdr = in_be32(priv->chan[ch].reg + TALITOS_DESCBUF);
+		desc_hdr = cpu_to_be32(in_be32(priv->chan[ch].reg + TALITOS_DESCBUF));
 
 	switch (desc_hdr & DESC_HDR_SEL0_MASK) {
 	case DESC_HDR_SEL0_AFEU:

2.27.0

From: Colin Ian King <[email protected]>

[ Upstream commit c98e233062cd9d0e2f10e445a671f0799daaef67 ]

An incorrect sizeof() is being used, sizeof(priv->ring[i].rdr_req) is not correct, it should be sizeof(*priv->ring[i].rdr_req). Note that since the size of ** is the same size as * this is not causing any issues.

Addresses-Coverity: ("Sizeof not portable (SIZEOF_MISMATCH)")

---
 drivers/crypto/inside-secure/safexcel.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index eb2418450f120..2e1562108a858 100644
@@ -1639,7 +1639,7 @@ static int safexcel_probe_generic(void *pdev,
 
 		priv->ring[i].rdr_req = devm_kcalloc(dev,
 			EIP197_DEFAULT_RING_SIZE,
-			sizeof(priv->ring[i].rdr_req),
+			sizeof(*priv->ring[i].rdr_req),
 			GFP_KERNEL);
 		if (!priv->ring[i].rdr_req)
 			return -ENOMEM;

2.27.0

From: Clément Péron <[email protected]>

[ Upstream commit 93c0210671d8f3ec2262da703fab93a1497158a8 ]

Left and Right justified mode are computed using the same formula as DSP_A and DSP_B mode.
Which is wrong and the user manual explicitly says:

LRCK_PERDIOD:
PCM Mode: Number of BCLKs within (Left + Right) channel width. I2S/Left-Justified/Right-Justified Mode: Number of BCLKs within each individual channel width(Left or Right)

Fix this by using the same formula as the I2S mode.

---
 sound/soc/sunxi/sun4i-i2s.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index f23ff29e7c1d3..a994b5cf87b31 100644
@@ -450,11 +450,11 @@ static int sun8i_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
 	switch (i2s->format & SND_SOC_DAIFMT_FORMAT_MASK) {
 	case SND_SOC_DAIFMT_DSP_A:
 	case SND_SOC_DAIFMT_DSP_B:
-	case SND_SOC_DAIFMT_LEFT_J:
-	case SND_SOC_DAIFMT_RIGHT_J:
 		lrck_period = params_physical_width(params) * slots;
 		break;
 
+	case SND_SOC_DAIFMT_LEFT_J:
+	case SND_SOC_DAIFMT_RIGHT_J:
 	case SND_SOC_DAIFMT_I2S:
 		lrck_period = params_physical_width(params);
 		break;

2.27.0

From: Robin Murphy <[email protected]>

[ Upstream commit a0b21e0ad29420b04911a98d360b9586168eeae5 ]

DRM_MSM fails to build with DRM_MSM_DP=n; add the missing stub.

---
 drivers/gpu/drm/msm/msm_drv.h | 5 +++++
 1 file changed, 5 insertions(+)

index b9dd8f8f48872..0b2686b060c73 100644
@@ -423,6 +423,11 @@ static inline int msm_dp_display_disable(struct msm_dp *dp,
 {
 	return -EINVAL;
 }
+static inline int msm_dp_display_pre_disable(struct msm_dp *dp,
+					struct drm_encoder *encoder)
+{
+	return -EINVAL;
+}
 static inline void msm_dp_display_mode_set(struct msm_dp *dp,
 				struct drm_encoder *encoder,
 				struct drm_display_mode *mode,

2.27.0

From: Vijay Khemka <[email protected]>

[ Upstream commit 14f100c00f1e35e5890340d4c6a64bda5dff4320 ]

Removed vuart for facebook tiogapass platform as it uses uart2 and uart3 pin with aspeed uart routing feature.

---
 arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts | 5 -----
 1 file changed, 5 deletions(-)

index 2d44d9ad4e400..e6ad821a86359 100644
@@ -82,11 +82,6 @@
 	status = "okay";
 };
 
-&vuart {
-	// VUART Host Console
-	status = "okay";
-};
-
 &uart1 {
 	// Host Console
 	status = "okay";

2.27.0

From: Arnd Bergmann <[email protected]>

[ Upstream commit dbb60031dd0c2b85f10ce4c12ae604c28d3aaca4 ]

gcc -Wextra warns about a function taking an enum argument being called with a bool:

drivers/gpu/drm/amd/amdgpu/../display/modules/color/color_gamma.c: In function 'apply_degamma_for_user_regamma':
drivers/gpu/drm/amd/amdgpu/../display/modules/color/color_gamma.c:1617:29: warning: implicit conversion from 'enum <anonymous>' to 'enum dc_transfer_func_predefined' [-Wenum-conversion]
1617 | build_coefficients(&coeff, true);

It appears that a patch was added using the old calling conventions after the type was changed, and the value should actually be 0 (TRANSFER_FUNCTION_SRGB) here instead of 1 (true).

---
 drivers/gpu/drm/amd/display/modules/color/color_gamma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index b8695660b480e..09bc2c249e1af 100644
@@ -1614,7 +1614,7 @@ static void apply_degamma_for_user_regamma(struct pwl_float_data_ex *rgb_regamma
 	struct pwl_float_data_ex *rgb = rgb_regamma;
 	const struct hw_x_point *coord_x = coordinates_x;
 
-	build_coefficients(&coeff, true);
+	build_coefficients(&coeff, TRANSFER_FUNCTION_SRGB);
 
 	i = 0;
 	while (i != hw_points_num + 1) {

2.27.0

From: Jordan Niethe <[email protected]>

[ Upstream commit 3c0b976bf20d236c57adcefa80f86a0a1d737727 ]

Currently in generic_secondary_smp_init(), cur_cpu_spec->cpu_restore() is called before a stack has been set up in r1. This was previously fine as the cpu_restore() functions were implemented in assembly and did not use a stack. However commit 5a61ef74f269 ("powerpc/64s: Support new device tree binding for discovering CPU features") used __restore_cpu_cpufeatures() as the cpu_restore() function for a device-tree features based cputable entry. This is a C function and hence uses a stack in r1.

generic_secondary_smp_init() is entered on the secondary cpus via the primary cpu using the OPAL call opal_start_cpu(). In OPAL, each hardware thread has its own stack. The OPAL call is ran in the primary's hardware thread. During the call, a job is scheduled on a secondary cpu that will start executing at the address of generic_secondary_smp_init(). Hence the value that will be left in r1 when the secondary cpu enters the kernel is part of that secondary cpu's individual OPAL stack. This means that __restore_cpu_cpufeatures() will write to that OPAL stack. This is not horribly bad as each hardware thread has its own stack and the call that enters the kernel from OPAL never returns, but it is still wrong and should be corrected.

Create the temp kernel stack before calling cpu_restore().

As noted by mpe, for a kexec boot, the secondary CPUs are released from the spin loop at address 0x60 by smp_release_cpus() and then jump to generic_secondary_smp_init(). The call to smp_release_cpus() is in setup_arch(), and it comes before the call to emergency_stack_init(). emergency_stack_init() allocates an emergency stack in the PACA for each CPU. This address in the PACA is what is used to set up the temp kernel stack in generic_secondary_smp_init(). Move releasing the secondary CPUs to after the PACAs have been allocated an emergency stack, otherwise the PACA stack pointer will contain garbage and hence the temp kernel stack created from it will be broken.

---
 arch/powerpc/kernel/head_64.S      | 8 ++++----
 arch/powerpc/kernel/setup-common.c | 4 ++--
 2 files changed, 6 insertions(+), 6 deletions(-)

index 1510b2a56669f..7b7c8c5ee6602 100644
@@ -417,6 +417,10 @@ generic_secondary_common_init:
 	/* From now on, r24 is expected to be logical cpuid */
 	mr	r24,r5
 
+	/* Create a temp kernel stack for use before relocation is on.	*/
+	ld	r1,PACAEMERGSP(r13)
+	subi	r1,r1,STACK_FRAME_OVERHEAD
+
 	/* See if we need to call a cpu state restore handler */
 	LOAD_REG_ADDR(r23, cur_cpu_spec)
 	ld	r23,0(r23)

@@ -445,10 +449,6 @@ generic_secondary_common_init:
 	sync				/* order paca.run and cur_cpu_spec */
 	isync				/* In case code patching happened */
 
-	/* Create a temp kernel stack for use before relocation is on.	*/
-	ld	r1,PACAEMERGSP(r13)
-	subi	r1,r1,STACK_FRAME_OVERHEAD
-
 	b	__secondary_start
 #endif /* SMP */
 

index 808ec9fab6052..da8c71f321ad3 100644
@@ -919,8 +919,6 @@ void __init setup_arch(char **cmdline_p)
 
 	/* On BookE, setup per-core TLB data structures. */
 	setup_tlb_core_data();
-
-	smp_release_cpus();
 #endif
 
 	/* Print various info about the machine that has been gathered so far. */

@@ -944,6 +942,8 @@ void __init setup_arch(char **cmdline_p)
 	exc_lvl_early_init();
 	emergency_stack_init();
 
+	smp_release_cpus();
+
 	initmem_init();
 
 	early_memtest(min_low_pfn << PAGE_SHIFT, max_low_pfn << PAGE_SHIFT);

2.27.0

From: Zhang Qilong <[email protected]>

[ Upstream commit ee5558a9084584015c8754ffd029ce14a5827fa8 ]

pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to pm_runtime_put_noidle will result in reference leak in img_spfi_resume, so we should fix it.

---
 drivers/spi/spi-img-spfi.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

index b068537375d60..5f05d519fbbd0 100644
@@ -731,8 +731,10 @@ static int img_spfi_resume(struct device *dev)
 	int ret;
 
 	ret = pm_runtime_get_sync(dev);
-	if (ret)
+	if (ret) {
+		pm_runtime_put_noidle(dev);
 		return ret;
+	}
 	spfi_reset(spfi);
 	pm_runtime_put(dev);
 

2.27.0

From: Jaegeuk Kim <[email protected]>

[ Upstream commit 3acc4522d89e0a326db69e9d0afaad8cf763a54c ]

When running fault injection test, if we don't stop checkpoint, some stale NAT entries were flushed which breaks consistency.

---
 fs/f2fs/node.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index d5d8ce077f295..42394de6c7eb1 100644
@@ -109,7 +109,7 @@ static void clear_node_page_dirty(struct page *page)
 
 static struct page *get_current_nat_page(struct f2fs_sb_info *sbi, nid_t nid)
 {
-	return f2fs_get_meta_page(sbi, current_nat_addr(sbi, nid));
+	return f2fs_get_meta_page_retry(sbi, current_nat_addr(sbi, nid));
 }
 
 static struct page *get_next_nat_page(struct f2fs_sb_info *sbi, nid_t nid)

2.27.0

From: Jason Gunthorpe <[email protected]>

[ Upstream commit fc3325701a6353594083f08e297d4c1965c601aa ]

reg_pages should always contain mr->npage since when the mr is finally de-reg'd it is always subtracted out.

If there were any error exits then mlx5_ib_rereg_user_mr() would leave the reg_pages adjusted and this will cause it to be double subtracted eventually.

The manipulation of reg_pages is inherently connected to the umem, so lift it out of set_mr_fields() and only adjust it around creating/destroying a umem.

reg_pages is only used for diagnostics in sysfs.

---
 drivers/infiniband/hw/mlx5/mr.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

index b261797b258fd..3468ae804eaee 100644
@@ -1247,10 +1247,8 @@ err_1:
 }
 
 static void set_mr_fields(struct mlx5_ib_dev *dev, struct mlx5_ib_mr *mr,
-			  int npages, u64 length, int access_flags)
+			  u64 length, int access_flags)
 {
-	mr->npages = npages;
-	atomic_add(npages, &dev->mdev->priv.reg_pages);
 	mr->ibmr.lkey = mr->mmkey.key;
 	mr->ibmr.rkey = mr->mmkey.key;
 	mr->ibmr.length = length;

@@ -1290,8 +1288,7 @@ static struct ib_mr *mlx5_ib_get_dm_mr(struct ib_pd *pd, u64 start_addr,
 
 	kfree(in);
 
-	mr->umem = NULL;
-	set_mr_fields(dev, mr, 0, length, acc);
+	set_mr_fields(dev, mr, length, acc);
 
 	return &mr->ibmr;
 

@@ -1419,7 +1416,9 @@ struct ib_mr *mlx5_ib_reg_user_mr(struct ib_pd *pd, u64 start, u64 length,
 	mlx5_ib_dbg(dev, "mkey 0x%x\n", mr->mmkey.key);
 
 	mr->umem = umem;
-	set_mr_fields(dev, mr, npages, length, access_flags);
+	mr->npages = npages;
+	atomic_add(mr->npages, &dev->mdev->priv.reg_pages);
+	set_mr_fields(dev, mr, length, access_flags);
 
 	if (xlt_with_umr && !(access_flags & IB_ACCESS_ON_DEMAND)) {
 		/*

@@ -1531,8 +1530,6 @@ int mlx5_ib_rereg_user_mr(struct ib_mr *ib_mr, int flags, u64 start,
 	mlx5_ib_dbg(dev, "start 0x%llx, virt_addr 0x%llx, length 0x%llx, access_flags 0x%x\n",
 		    start, virt_addr, length, access_flags);
 
-	atomic_sub(mr->npages, &dev->mdev->priv.reg_pages);
-
 	if (!mr->umem)
 		return -EINVAL;
 

@@ -1553,12 +1550,17 @@ int mlx5_ib_rereg_user_mr(struct ib_mr *ib_mr, int flags, u64 start,
 		 * used.
 		 */
 		flags |= IB_MR_REREG_TRANS;
+		atomic_sub(mr->npages, &dev->mdev->priv.reg_pages);
+		mr->npages = 0;
 		ib_umem_release(mr->umem);
 		mr->umem = NULL;
+
 		err = mr_umem_get(dev, addr, len, access_flags, &mr->umem,
 				  &npages, &page_shift, &ncont, &order);
 		if (err)
 			goto err;
+		mr->npages = ncont;
+		atomic_add(mr->npages, &dev->mdev->priv.reg_pages);
 	}
 
 	if (!mlx5_ib_can_reconfig_with_umr(dev, mr->access_flags,

@@ -1609,7 +1611,7 @@ int mlx5_ib_rereg_user_mr(struct ib_mr *ib_mr, int flags, u64 start,
 			goto err;
 	}
 
-	set_mr_fields(dev, mr, npages, len, access_flags);
+	set_mr_fields(dev, mr, len, access_flags);
 
 	return 0;
 

2.27.0

From: Namhyung Kim <[email protected]>

[ Upstream commit 9b0a7836359443227c9af101f7aea8412e739458 ]

I found that the UNHALTED_CORE_CYCLES event is only available in the Intel machines and it makes other vendors/archs fail on the test. As libpfm4 can parse the generic events like cycles, let's use them.

---
 tools/perf/tests/expand-cgroup.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index d5771e4d094f8..4c59f3ae438fc 100644
@@ -145,7 +145,7 @@ static int expand_libpfm_events(void)
 	int ret;
 	struct evlist *evlist;
 	struct rblist metric_events;
-	const char event_str[] = "UNHALTED_CORE_CYCLES";
+	const char event_str[] = "CYCLES";
 	struct option opt = {
 		.value = &evlist,
 	};

2.27.0

From: Tanmay Shah <[email protected]>

[ Upstream commit 6625e2637d93d2f52ef0d17656f21bfa2cb4983a ]

Bandwidth code was being used as test link rate. Fix this by converting bandwidth code to test link rate