Skip to contentSkip to conversation

PCI: tegra: Read "dbi" base address to program in application logic

PATCH Applied Vidya Sagar 3 participants 3 messages Nov 25, 2020 – Dec 1, 2020

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 PCI: tegra: Read "dbi" base address to program in application logic

PCIe controller in Tegra194 requires the "dbi" region base address to be programmed in one of the application logic registers to enable CPU access to the "dbi" region. But, commit a0fd361db8e5 ("PCI: dwc: Move "dbi", "dbi2", and "addr_space" resource setup into common code") moved the code that reads the whereabouts of "dbi" region to the common code causing the existing code in pcie-tegra194.c file to program NULL in the application logic registers. This is causing null pointer dereference when the "dbi" registers are accessed. This issue is fixed by explicitly reading the "dbi" base address from DT node.

Fixes a0fd361db8e5 ("PCI: dwc: Move "dbi", "dbi2", and "addr_space" resource setup into common code")
---
 drivers/pci/controller/dwc/pcie-tegra194.c | 7 +++++++
 1 file changed, 7 insertions(+)
drivers/pci/controller/dwc/pcie-tegra194.c +7 -0
index fa54d9aaa430..ac2225175087 100644
@@ -1053,9 +1053,16 @@ static int tegra_pcie_enable_phy(struct tegra_pcie_dw *pcie)
 
 static int tegra_pcie_dw_parse_dt(struct tegra_pcie_dw *pcie)
 {
+	struct platform_device *pdev = to_platform_device(pcie->dev);
 	struct device_node *np = pcie->dev->of_node;
 	int ret;
 
+	pcie->dbi_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi");
+	if (!pcie->dbi_res) {
+		dev_err(pcie->dev, "Failed to find \"dbi\" region\n");
+		return -ENODEV;
+	}
+
 	ret = of_property_read_u32(np, "nvidia,aspm-cmrt-us", &pcie->aspm_cmrt);
 	if (ret < 0) {
 		dev_info(pcie->dev, "Failed to read ASPM T_cmrt: %d\n", ret);
Signature · 1 line
2.17.1
Tested-by Acked-by on v1 1/1
#1 lore raw
Quoted 10 lines · Vidya Sagar

PCIe controller in Tegra194 requires the "dbi" region base address to be programmed in one of the application logic registers to enable CPU access to the "dbi" region. But, commit a0fd361db8e5 ("PCI: dwc: Move "dbi", "dbi2", and "addr_space" resource setup into common code") moved the code that reads the whereabouts of "dbi" region to the common code causing the existing code in pcie-tegra194.c file to program NULL in the application logic registers. This is causing null pointer dereference when the "dbi" registers are accessed. This issue is fixed by explicitly reading the "dbi" base address from DT node.

Quoted 5 lines
Fixes a0fd361db8e5 ("PCI: dwc: Move "dbi", "dbi2", and "addr_space" resource setup into common code")
---
 drivers/pci/controller/dwc/pcie-tegra194.c | 7 +++++++
 1 file changed, 7 insertions(+)
#2 lore raw
In reply to Vidya Sagar
Quoted 9 lines · Vidya Sagar

PCIe controller in Tegra194 requires the "dbi" region base address to be programmed in one of the application logic registers to enable CPU access to the "dbi" region. But, commit a0fd361db8e5 ("PCI: dwc: Move "dbi", "dbi2", and "addr_space" resource setup into common code") moved the code that reads the whereabouts of "dbi" region to the common code causing the existing code in pcie-tegra194.c file to program NULL in the application logic registers. This is causing null pointer dereference when the "dbi" registers are accessed. This issue is fixed by explicitly reading the "dbi" base address from DT node.

Applied to pci/dwc, thanks!

[1/1] PCI: tegra: Read "dbi" base address to program in application logic

      https://git.kernel.org/lpieralisi/pci/c/d5353c00cf

Thanks,
Lorenzo