spurious interrupt with ac kernel but not with vanilla
Quoted 7 lines · Luigi Genoni
I noticed that on the abit kt7A MBs that i have, with via KT133A chipset, after i installed the kernel 2.4.9-ac10 (ac11 and 12 as well), at boot i get this message,
Sep 21 11:52:11 DarkStar kernel: ice 00:0b.0 Sep 21 11:52:11 DarkStar kernel: spurious 8259A interrupt: IRQ7. immediatelly before scsi adaptec detection and inizzializzation.
This happens to me too (Asus A7V, KT133). It happens since I remember - at least since Christmas, and for me it happens after unspecified time after boot - varying from few seconds (during initscripts) to few minutes. After it happens once, everything is apparently satisified and no more spurious interrupts occurs (until next reboot). I always assumed that it is broken VIA again...
Best regards,
Petr Vandrovec [email protected]
Quoted 5 lines
This happens to me too (Asus A7V, KT133). It happens since I remember - at least since Christmas, and for me it happens after unspecified time after boot - varying from few seconds (during initscripts) to few minutes. After it happens once, everything is apparently satisified and no more spurious interrupts occurs (until next reboot).
Same behaviour on a bunch of EpoX 8KTA+, KT133. Didn't care about it. Doesn't happen on a variety of PIII boards (Intel clones and Asus) so it looks like a KT133 issue. Kernel config is UP with APIC support on all systems.
Andreas Steinmetz
D.O.M. Datenverarbeitung GmbH
Andreas Steinmetz <[email protected]> :
[...]
Quoted 3 lines
Same behaviour on a bunch of EpoX 8KTA+, KT133. Didn't care about it. Doesn't happen on a variety of PIII boards (Intel clones and Asus) so it looks like a KT133 issue. Kernel config is UP with APIC support on all systems.
Got it here on plain old Intel BX (Asus) + PII + vanilla. A few minutes or one/two hours after reboot. So far, so good.
Signature · 1 line
Ueimor