tools/perf/tests: Change true workload to sleep workload in all metric test for system wide check
PATCH v2 1/1 tools/perf/tests: Change true workload to sleep workload in all metric test for system wide check
Testcase stat_all_metrics.sh fails in powerpc:
98: perf all metrics test : FAILED!
Logs with verbose:
[command]# ./perf test 98 -vv
98: perf all metrics test :
--- start ---
test child forked, pid 13262
Testing BRU_STALL_CPI
Testing COMPLETION_STALL_CPI
----
Testing TOTAL_LOCAL_NODE_PUMPS_P23
Metric 'TOTAL_LOCAL_NODE_PUMPS_P23' not printed in:
Error:
Invalid event (hv_24x7/PM_PB_LNS_PUMP23,chip=3/) in per-thread mode, enable system wide with '-a'. Testing TOTAL_LOCAL_NODE_PUMPS_RETRIES_P01
Metric 'TOTAL_LOCAL_NODE_PUMPS_RETRIES_P01' not printed in:
Error:
Invalid event (hv_24x7/PM_PB_RTY_LNS_PUMP01,chip=3/) in per-thread mode, enable system wide with '-a'.
----
Based on above logs, we could see some of the hv-24x7 metric events fails, and logs suggest to run the metric event with -a option.
This change happened after the commit a4b8cfcabb1d ("perf stat: Delay metric parsing"), which delayed the metric parsing phase and now before metric parsing phase perf tool identifies, whether target is system-wide or not. With this change, perf_event_open will fails with workload monitoring for uncore events as expected.
The perf all metric test case fails as some of the hv-24x7 metric events may need bigger workload with system wide monitoring to get the data. Fix this issue by changing current system wide check from true workload to sleep 0.01 workload.
Result with the patch changes in powerpc:
98: perf all metrics test : Ok
---
Changelog:
v1->v2:
- Addressed review comments from Ian, by changing true workload to sleep workload in "perf all metric test". Rather then adding new system wide check with perf bench workload.
- Added Reviewed-by, Tested-by and Suggested-by tags.
tools/perf/tests/shell/stat_all_metrics.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
tools/perf/tests/shell/stat_all_metrics.sh +1 -1
@@ -11,7 +11,7 @@ for m in $(perf list --raw-dump metrics); do continue fi # Failed so try system wide. - result=$(perf stat -M "$m" -a true 2>&1) + result=$(perf stat -M "$m" -a sleep 0.01 2>&1) if [[ "$result" =~ "${m:0:50}" ]] then continue
Signature · 1 line
2.39.1
Quoted 37 lines · Kajol Jain
Testcase
stat_all_metrics.shfails in powerpc:98: perf all metrics test : FAILED!
Logs with verbose:
[command]# ./perf test 98 -vv
98: perf all metrics test :
--- start ---
test child forked, pid 13262
TestingBRU_STALL_CPI
TestingCOMPLETION_STALL_CPI
----
TestingTOTAL_LOCAL_NODE_PUMPS_P23
Metric 'TOTAL_LOCAL_NODE_PUMPS_P23' not printed in:
Error:
Invalid event (hv_24x7/PM_PB_LNS_PUMP23,chip=3/) in per-thread mode, enable system wide with '-a'. TestingTOTAL_LOCAL_NODE_PUMPS_RETRIES_P01
Metric 'TOTAL_LOCAL_NODE_PUMPS_RETRIES_P01' not printed in:
Error:
Invalid event (hv_24x7/PM_PB_RTY_LNS_PUMP01,chip=3/) in per-thread mode, enable system wide with '-a'.
----Based on above logs, we could see some of the hv-24x7 metric events fails, and logs suggest to run the metric event with -a option.
This change happened after the commita4b8cfcabb1d("perf stat: Delay metric parsing"), which delayed the metric parsing phase and now before metric parsing phase perf tool identifies, whether target is system-wide or not. With this change,perf_event_openwill fails with workload monitoring for uncore events as expected.The perf all metric test case fails as some of the hv-24x7 metric events may need bigger workload with system wide monitoring to get the data. Fix this issue by changing current system wide check from true workload to sleep 0.01 workload.
Quoted 8 lines
Result with the patch changes in powerpc:
98: perf all metrics test : Ok
Reviewed-by Athira Rajeev <[email protected]>Tested-by Disha Goel <[email protected]>Suggested-by Ian Rogers <[email protected]>Signed-off-by Kajol Jain <[email protected]>
The mention of a4b8cfcabb1d can be moved to a Fixes tag so that this is backported.
Thanks,
Ian
Quoted 28 lines
---
Changelog:
v1->v2:
- Addressed review comments from Ian, by changing true workload to sleep workload in "perf all metric test". Rather then adding new system wide check with perf bench workload.
- Added Reviewed-by, Tested-by and Suggested-by tags.tools/perf/tests/shell/stat_all_metrics.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)tools/perf/tests/shell/stat_all_metrics.sh +1
-2@@ -11,7 +11,7 @@ for m in $(perf list --raw-dump metrics); do continue fi # Failed so try system wide. - result=$(perf stat -M "$m" -a true 2>&1) + result=$(perf stat -M "$m" -a sleep 0.01 2>&1) if [[ "$result" =~ "${m:0:50}" ]] then continue --2.39.1
Arnaldo Carvalho de Melo
maintainerEm Wed, Feb 15, 2023 at 08:08:20AM -0800, Ian Rogers escreveu:
Quoted 47 lines · Kajol Jain
Quoted 37 lines
Testcase
stat_all_metrics.shfails in powerpc:98: perf all metrics test : FAILED!
Logs with verbose:
[command]# ./perf test 98 -vv
98: perf all metrics test :
--- start ---
test child forked, pid 13262
TestingBRU_STALL_CPI
TestingCOMPLETION_STALL_CPI
----
TestingTOTAL_LOCAL_NODE_PUMPS_P23
Metric 'TOTAL_LOCAL_NODE_PUMPS_P23' not printed in:
Error:
Invalid event (hv_24x7/PM_PB_LNS_PUMP23,chip=3/) in per-thread mode, enable system wide with '-a'. TestingTOTAL_LOCAL_NODE_PUMPS_RETRIES_P01
Metric 'TOTAL_LOCAL_NODE_PUMPS_RETRIES_P01' not printed in:
Error:
Invalid event (hv_24x7/PM_PB_RTY_LNS_PUMP01,chip=3/) in per-thread mode, enable system wide with '-a'.
----Based on above logs, we could see some of the hv-24x7 metric events fails, and logs suggest to run the metric event with -a option.
This change happened after the commita4b8cfcabb1d("perf stat: Delay metric parsing"), which delayed the metric parsing phase and now before metric parsing phase perf tool identifies, whether target is system-wide or not. With this change,perf_event_openwill fails with workload monitoring for uncore events as expected.The perf all metric test case fails as some of the hv-24x7 metric events may need bigger workload with system wide monitoring to get the data. Fix this issue by changing current system wide check from true workload to sleep 0.01 workload.
Quoted 8 lines
Result with the patch changes in powerpc:
98: perf all metrics test : Ok
Reviewed-by Athira Rajeev <[email protected]>Tested-by Disha Goel <[email protected]>Suggested-by Ian Rogers <[email protected]>Signed-off-by Kajol Jain <[email protected]>
Quoted 4 lines
Tested-by Ian Rogers <[email protected]>The mention of
a4b8cfcabb1dcan be moved to a Fixes tag so that this is backported.
Done, thanks, applied.
- Arnaldo