Skip to contentSkip to conversation

media: cx88: Fix a null-ptr-deref bug in buffer_prepare()

PATCH In review Sasha Levin 2 participants 14 messages Oct 13, 2022

Subsystems (8)
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/13 media: cx88: Fix a null-ptr-deref bug in buffer_prepare()

From: Zheyu Ma <[email protected]>

[ Upstream commit 2b064d91440b33fba5b452f2d1b31f13ae911d71 ]

When the driver calls cx88_risc_buffer() to prepare the buffer, the function call may fail, resulting in a empty buffer and null-ptr-deref later in buffer_queue().

The following log can reveal it:

[   41.822762] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI
[   41.824488] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[   41.828027] RIP: 0010:buffer_queue+0xc2/0x500
[   41.836311] Call Trace:
[   41.836945]  __enqueue_in_driver+0x141/0x360
[   41.837262]  vb2_start_streaming+0x62/0x4a0
[   41.838216]  vb2_core_streamon+0x1da/0x2c0
[   41.838516]  __vb2_init_fileio+0x981/0xbc0
[   41.839141]  __vb2_perform_fileio+0xbf9/0x1120
[   41.840072]  vb2_fop_read+0x20e/0x400
[   41.840346]  v4l2_read+0x215/0x290
[   41.840603]  vfs_read+0x162/0x4c0

Fix this by checking the return value of cx88_risc_buffer()

[hverkuil: fix coding style issues]

---
 drivers/media/pci/cx88/cx88-vbi.c   |  9 +++---
 drivers/media/pci/cx88/cx88-video.c | 43 +++++++++++++++--------------
 2 files changed, 26 insertions(+), 26 deletions(-)
drivers/media/pci/cx88/cx88-vbi.c +4 -5
index c637679b01b2..2649f87c070f 100644
@@ -144,11 +144,10 @@ static int buffer_prepare(struct vb2_buffer *vb)
 		return -EINVAL;
 	vb2_set_plane_payload(vb, 0, size);
 
-	cx88_risc_buffer(dev->pci, &buf->risc, sgt->sgl,
-			 0, VBI_LINE_LENGTH * lines,
-			 VBI_LINE_LENGTH, 0,
-			 lines);
-	return 0;
+	return cx88_risc_buffer(dev->pci, &buf->risc, sgt->sgl,
+				0, VBI_LINE_LENGTH * lines,
+				VBI_LINE_LENGTH, 0,
+				lines);
 }
 
 static void buffer_finish(struct vb2_buffer *vb)
drivers/media/pci/cx88/cx88-video.c +22 -21

70 lines not on this page · raw message

Signature · 1 line
2.35.1
author maintainer
#1 lore raw

PATCH 2/13 scsi: 3w-9xxx: Avoid disabling device if failing to enable it

From: Letu Ren <[email protected]>

[ Upstream commit 7eff437b5ee1309b34667844361c6bbb5c97df05 ]

The original code will "goto out_disable_device" and call pci_disable_device() if pci_enable_device() fails. The kernel will generate a warning message like "3w-9xxx 0000:00:05.0: disabling already-disabled device".

We shouldn't disable a device that failed to be enabled. A simple return is fine.

---
 drivers/scsi/3w-9xxx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/3w-9xxx.c +1 -1
index dd342207095a..0baeed1793aa 100644
@@ -2013,7 +2013,7 @@ static int twa_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id)
 	retval = pci_enable_device(pdev);
 	if (retval) {
 		TW_PRINTK(host, TW_DRIVER, 0x34, "Failed to enable pci device");
-		goto out_disable_device;
+		return -ENODEV;
 	}
 
 	pci_set_master(pdev);
Signature · 1 line
2.35.1
author maintainer
#2 lore raw

PATCH 3/13 nbd: Fix hung when signal interrupts nbd_start_device_ioctl()

In reply to Sasha Levin

From: Shigeru Yoshida <[email protected]>

[ Upstream commit 1de7c3cf48fc41cd95adb12bd1ea9033a917798a ]

syzbot reported hung task [1]. The following program is a simplified version of the reproducer:

int main(void)

{
	int sv[2], fd;

	if (socketpair(AF_UNIX, SOCK_STREAM, 0, sv) < 0)
		return 1;
	if ((fd = open("/dev/nbd0", 0)) < 0)
		return 1;
	if (ioctl(fd, NBD_SET_SIZE_BLOCKS, 0x81) < 0)
		return 1;
	if (ioctl(fd, NBD_SET_SOCK, sv[0]) < 0)
		return 1;
	if (ioctl(fd, NBD_DO_IT) < 0)
		return 1;
	return 0;
}

When signal interrupt nbd_start_device_ioctl() waiting the condition atomic_read(&config->recv_threads) == 0, the task can hung because it waits the completion of the inflight IOs.

This patch fixes the issue by clearing queue, not just shutdown, when signal interrupt nbd_start_device_ioctl().

---
 drivers/block/nbd.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/block/nbd.c +4 -2
index 338d02a67afb..f01b8860ba14 100644
@@ -1258,10 +1258,12 @@ static int nbd_start_device_ioctl(struct nbd_device *nbd, struct block_device *b
 	mutex_unlock(&nbd->config_lock);
 	ret = wait_event_interruptible(config->recv_wq,
 					 atomic_read(&config->recv_threads) == 0);
-	if (ret)
+	if (ret) {
 		sock_shutdown(nbd);
-	flush_workqueue(nbd->recv_workq);
+		nbd_clear_que(nbd);
+	}
 
+	flush_workqueue(nbd->recv_workq);
 	mutex_lock(&nbd->config_lock);
 	bd_set_size(bdev, 0);
 	/* user requested, ignore socket errors */
Signature · 1 line
2.35.1
author maintainer
#3 lore raw

PATCH 4/13 hid: topre: Add driver fixing report descriptor

In reply to Sasha Levin

From: Harry Stern <[email protected]>

[ Upstream commit a109d5c45b3d6728b9430716b915afbe16eef27c ]

The Topre REALFORCE R2 firmware incorrectly reports that interface descriptor number 1, input report descriptor 2's events are array events rather than variable events. That particular report descriptor is used to report keypresses when there are more than 6 keys held at a time. This bug prevents events from this interface from being registered properly, so only 6 keypresses (from a different interface) can be registered at once, rather than full n-key rollover.

This commit fixes the bug by setting the correct value in a report_fixup function.

The original bug report can be found here:

Thanks to Benjamin Tissoires for diagnosing the issue with the report descriptor.

---
 drivers/hid/Kconfig     |  6 +++++
 drivers/hid/Makefile    |  1 +
 drivers/hid/hid-ids.h   |  3 +++
 drivers/hid/hid-topre.c | 49 +++++++++++++++++++++++++++++++++++++++++
 4 files changed, 59 insertions(+)
 create mode 100644 drivers/hid/hid-topre.c
drivers/hid/Kconfig +6 -0
index a4fb3fccf1b2..3311f0adf30c 100644
@@ -892,6 +892,12 @@ config HID_TOPSEED
 	Say Y if you have a TopSeed Cyberlink or BTC Emprex or Conceptronic
 	CLLRCMCE remote control.
 
+config HID_TOPRE
+	tristate "Topre REALFORCE keyboards"
+	depends on HID
+	help
+	  Say Y for N-key rollover support on Topre REALFORCE R2 108 key keyboards.
+
 config HID_THINGM
 	tristate "ThingM blink(1) USB RGB LED"
 	depends on HID
drivers/hid/Makefile +1 -0
index 235bd2a7b333..a6ee2f5ca3b7 100644
@@ -100,6 +100,7 @@ obj-$(CONFIG_HID_GREENASIA)	+= hid-gaff.o
 obj-$(CONFIG_HID_THRUSTMASTER)	+= hid-tmff.o
 obj-$(CONFIG_HID_TIVO)		+= hid-tivo.o
 obj-$(CONFIG_HID_TOPSEED)	+= hid-topseed.o
+obj-$(CONFIG_HID_TOPRE)	+= hid-topre.o
 obj-$(CONFIG_HID_TWINHAN)	+= hid-twinhan.o
 obj-$(CONFIG_HID_UCLOGIC)	+= hid-uclogic.o
 obj-$(CONFIG_HID_UDRAW_PS3)	+= hid-udraw-ps3.o
drivers/hid/hid-ids.h +3 -0
index e5f2958bc18c..05b3ed74c4d2 100644
@@ -1048,6 +1048,9 @@
 #define USB_DEVICE_ID_TIVO_SLIDE	0x1201
 #define USB_DEVICE_ID_TIVO_SLIDE_PRO	0x1203
 
+#define USB_VENDOR_ID_TOPRE			0x0853
+#define USB_DEVICE_ID_TOPRE_REALFORCE_R2_108			0x0148
+
 #define USB_VENDOR_ID_TOPSEED		0x0766
 #define USB_DEVICE_ID_TOPSEED_CYBERLINK	0x0204
 
drivers/hid/hid-topre.c new file +49 -0

49 lines not on this page · raw message

Signature · 1 line
2.35.1
author maintainer
#4 lore raw

PATCH 5/13 HID: roccat: Fix use-after-free in roccat_read()

In reply to Sasha Levin

From: Hyunwoo Kim <[email protected]>

[ Upstream commit cacdb14b1c8d3804a3a7d31773bc7569837b71a4 ]

roccat_report_event() is responsible for registering roccat-related reports in struct roccat_device.

int roccat_report_event(int minor, u8 const *data)

{
	struct roccat_device *device;
	struct roccat_reader *reader;
	struct roccat_report *report;
	uint8_t *new_value;

	device = devices[minor];

	new_value = kmemdup(data, device->report_size, GFP_ATOMIC);
	if (!new_value)
		return -ENOMEM;

	report = &device->cbuf[device->cbuf_end];

	/* passing NULL is safe */
	kfree(report->value);
	...

The registered report is stored in the struct roccat_device member "struct roccat_report cbuf[ROCCAT_CBUF_SIZE];".
If more reports are received than the "ROCCAT_CBUF_SIZE" value, kfree() the saved report from cbuf[0] and allocates a new reprot. Since there is no lock when this kfree() is performed, kfree() can be performed even while reading the saved report.

static ssize_t roccat_read(struct file *file, char __user *buffer,
size_t count, loff_t *ppos)

{
	struct roccat_reader *reader = file->private_data;
	struct roccat_device *device = reader->device;
	struct roccat_report *report;
	ssize_t retval = 0, len;
	DECLARE_WAITQUEUE(wait, current);

	mutex_lock(&device->cbuf_lock);

	...

	report = &device->cbuf[reader->cbuf_start];
	/*
	 * If report is larger than requested amount of data, rest of report
	 * is lost!
	 */
	len = device->report_size > count ? count : device->report_size;

	if (copy_to_user(buffer, report->value, len)) {
		retval = -EFAULT;
		goto exit_unlock;
	}
	...

The roccat_read() function receives the device->cbuf report and delivers it to the user through copy_to_user().
If the N+ROCCAT_CBUF_SIZE th report is received while copying of the Nth report->value is in progress, the pointer that copy_to_user() is working on is kfree()ed and UAF read may occur. (race condition)

Since the device node of this driver does not set separate permissions, this is not a security vulnerability, but because it is used for requesting screen display of profile or dpi settings,
a user using the roccat device can apply udev to this device node or There is a possibility to use it by giving.

---
 drivers/hid/hid-roccat.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/hid/hid-roccat.c +4 -0
index fb77dec720a4..edfaf2cd0f26 100644
@@ -260,6 +260,8 @@ int roccat_report_event(int minor, u8 const *data)
 	if (!new_value)
 		return -ENOMEM;
 
+	mutex_lock(&device->cbuf_lock);
+
 	report = &device->cbuf[device->cbuf_end];
 
 	/* passing NULL is safe */
@@ -279,6 +281,8 @@ int roccat_report_event(int minor, u8 const *data)
 			reader->cbuf_start = (reader->cbuf_start + 1) % ROCCAT_CBUF_SIZE;
 	}
 
+	mutex_unlock(&device->cbuf_lock);
+
 	wake_up_interruptible(&device->wait);
 	return 0;
 }
Signature · 1 line
2.35.1
author maintainer
#5 lore raw

PATCH 6/13 HSI: ssi_protocol: fix potential resource leak in ssip_pn_open()

In reply to Sasha Levin

From: Jianglei Nie <[email protected]>

[ Upstream commit b28dbcb379e6a7f80262c2732a57681b1ee548ca ]

ssip_pn_open() claims the HSI client's port with hsi_claim_port(). When hsi_register_port_event() gets some error and returns a negetive value, the HSI client's port should be released with hsi_release_port().

Fix it by calling hsi_release_port() when hsi_register_port_event() fails.

---
 drivers/hsi/clients/ssi_protocol.c | 1 +
 1 file changed, 1 insertion(+)
drivers/hsi/clients/ssi_protocol.c +1 -0
index 93d28c0ec8bf..7fe3639c2826 100644
@@ -932,6 +932,7 @@ static int ssip_pn_open(struct net_device *dev)
 	if (err < 0) {
 		dev_err(&cl->device, "Register HSI port event failed (%d)\n",
 			err);
+		hsi_release_port(cl);
 		return err;
 	}
 	dev_dbg(&cl->device, "Configuring SSI port\n");
Signature · 1 line
2.35.1
author maintainer
#6 lore raw

PATCH 7/13 md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d

In reply to Sasha Levin

From: Logan Gunthorpe <[email protected]>

[ Upstream commit 5e2cf333b7bd5d3e62595a44d598a254c697cd74 ]

A complicated deadlock exists when using the journal and an elevated group_thrtead_cnt. It was found with loop devices, but its not clear whether it can be seen with real disks. The deadlock can occur simply by writing data with an fio script.

When the deadlock occurs, multiple threads will hang in different ways:

1) The group threads will hang in the blk-wbt code with bios waiting to

    be submitted to the block layer:

        io_schedule+0x70/0xb0
        rq_qos_wait+0x153/0x210
        wbt_wait+0x115/0x1b0
        io_schedule+0x70/0xb0
        rq_qos_wait+0x153/0x210
        wbt_wait+0x115/0x1b0
        __rq_qos_throttle+0x38/0x60
        blk_mq_submit_bio+0x589/0xcd0
        wbt_wait+0x115/0x1b0
        __rq_qos_throttle+0x38/0x60
        blk_mq_submit_bio+0x589/0xcd0
        __submit_bio+0xe6/0x100
        submit_bio_noacct_nocheck+0x42e/0x470
        submit_bio_noacct+0x4c2/0xbb0
        ops_run_io+0x46b/0x1a30
        handle_stripe+0xcd3/0x36b0
        handle_active_stripes.constprop.0+0x6f6/0xa60
        raid5_do_work+0x177/0x330

    Or:
        io_schedule+0x70/0xb0
        rq_qos_wait+0x153/0x210
        wbt_wait+0x115/0x1b0
        __rq_qos_throttle+0x38/0x60
        blk_mq_submit_bio+0x589/0xcd0
        __submit_bio+0xe6/0x100
        submit_bio_noacct_nocheck+0x42e/0x470
        submit_bio_noacct+0x4c2/0xbb0
        flush_deferred_bios+0x136/0x170
        raid5_do_work+0x262/0x330

2) The r5l_reclaim thread will hang in the same way, submitting a

    bio to the block layer:

        io_schedule+0x70/0xb0
        rq_qos_wait+0x153/0x210
        wbt_wait+0x115/0x1b0
        __rq_qos_throttle+0x38/0x60
        blk_mq_submit_bio+0x589/0xcd0
        __submit_bio+0xe6/0x100
        submit_bio_noacct_nocheck+0x42e/0x470
        submit_bio_noacct+0x4c2/0xbb0
        submit_bio+0x3f/0xf0
        md_super_write+0x12f/0x1b0
        md_update_sb.part.0+0x7c6/0xff0
        md_update_sb+0x30/0x60
        r5l_do_reclaim+0x4f9/0x5e0
        r5l_reclaim_thread+0x69/0x30b

    However, before hanging, the MD_SB_CHANGE_PENDING flag will be
    set for sb_flags in r5l_write_super_and_discard_space(). This
    flag will never be cleared because the submit_bio() call never
    returns.

3) Due to the MD_SB_CHANGE_PENDING flag being set, handle_stripe() will do no processing on any pending stripes and re-set STRIPE_HANDLE. This will cause the raid5d thread to enter an infinite loop, constantly trying to handle the same stripes stuck in the queue.

The raid5d thread has a blk_plug that holds a number of bios that are also stuck waiting seeing the thread is in a loop that never schedules. These bios have been accounted for by blk-wbt thus preventing the other threads above from continuing when they try to submit bios. --Deadlock.

To fix this, add the same wait_event() that is used in raid5_do_work() to raid5d() such that if MD_SB_CHANGE_PENDING is set, the thread will schedule and wait until the flag is cleared. The schedule action will flush the plug which will allow the r5l_reclaim thread to continue, thus preventing the deadlock.

However, md_check_recovery() calls can also clear MD_SB_CHANGE_PENDING from the same thread and can thus deadlock if the thread is put to sleep. So avoid waiting if md_check_recovery() is being called in the loop.

It's not clear when the deadlock was introduced, but the similar wait_event() call in raid5_do_work() was added in 2017 by this commit:

16d997b78b15 ("md/raid5: simplfy delaying of writes while metadata
is updated.")

---
 drivers/md/raid5.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)
drivers/md/raid5.c +12 -0
index 866ba1743f9f..2a74acc6371e 100644
@@ -44,6 +44,7 @@
  */
 
 #include <linux/blkdev.h>
+#include <linux/delay.h>
 #include <linux/kthread.h>
 #include <linux/raid/pq.h>
 #include <linux/async_tx.h>
@@ -6308,7 +6309,18 @@ static void raid5d(struct md_thread *thread)
 			spin_unlock_irq(&conf->device_lock);
 			md_check_recovery(mddev);
 			spin_lock_irq(&conf->device_lock);
+
+			/*
+			 * Waiting on MD_SB_CHANGE_PENDING below may deadlock
+			 * seeing md_check_recovery() is needed to clear
+			 * the flag when using mdmon.
+			 */
+			continue;
 		}
+
+		wait_event_lock_irq(mddev->sb_wait,
+			!test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags),
+			conf->device_lock);
 	}
 	pr_debug("%d stripes handled\n", handled);
 
Signature · 1 line
2.35.1
author maintainer
#7 lore raw

PATCH 8/13 usb: host: xhci: Fix potential memory leak in xhci_alloc_stream_info()

In reply to Sasha Levin

From: Jianglei Nie <[email protected]>

[ Upstream commit 7e271f42a5cc3768cd2622b929ba66859ae21f97 ]

xhci_alloc_stream_info() allocates stream context array for stream_info ->stream_ctx_array with xhci_alloc_stream_ctx(). When some error occurs, stream_info->stream_ctx_array is not released, which will lead to a memory leak.

We can fix it by releasing the stream_info->stream_ctx_array with xhci_free_stream_ctx() on the error path to avoid the potential memory leak.

---
 drivers/usb/host/xhci-mem.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/usb/host/xhci-mem.c +6 -1
index e930e2777c87..ae724460c8f2 100644
@@ -657,7 +657,7 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci,
 			num_stream_ctxs, &stream_info->ctx_array_dma,
 			mem_flags);
 	if (!stream_info->stream_ctx_array)
-		goto cleanup_ctx;
+		goto cleanup_ring_array;
 	memset(stream_info->stream_ctx_array, 0,
 			sizeof(struct xhci_stream_ctx)*num_stream_ctxs);
 
@@ -718,6 +718,11 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci,
 	}
 	xhci_free_command(xhci, stream_info->free_streams_command);
 cleanup_ctx:
+	xhci_free_stream_ctx(xhci,
+		stream_info->num_stream_ctxs,
+		stream_info->stream_ctx_array,
+		stream_info->ctx_array_dma);
+cleanup_ring_array:
 	kfree(stream_info->stream_rings);
 cleanup_info:
 	kfree(stream_info);
Signature · 1 line
2.35.1
author maintainer
#8 lore raw

PATCH 9/13 usb: musb: Fix musb_gadget.c rxstate overflow bug

In reply to Sasha Levin

From: Robin Guo <[email protected]>

[ Upstream commit eea4c860c3b366369eff0489d94ee4f0571d467d ]

The usb function device call musb_gadget_queue() adds the passed request to musb_ep::req_list,If the (request->length > musb_ep->packet_sz) and (is_buffer_mapped(req) return false),the rxstate() will copy all data in fifo to request->buf which may cause request->buf out of bounds.

Fix it by add the length check :
fifocnt = min_t(unsigned, request->length - request->actual, fifocnt);

---
 drivers/usb/musb/musb_gadget.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/usb/musb/musb_gadget.c +3 -0
index 319c5a1b4a6a..8fd68f45a8df 100644
@@ -785,6 +785,9 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 			musb_writew(epio, MUSB_RXCSR, csr);
 
 buffer_aint_mapped:
+			fifo_count = min_t(unsigned int,
+					request->length - request->actual,
+					(unsigned int)fifo_count);
 			musb_read_fifo(musb_ep->hw_ep, fifo_count, (u8 *)
 					(request->buf + request->actual));
 			request->actual += fifo_count;
Signature · 1 line
2.35.1
author maintainer
#9 lore raw

PATCH 10/13 Revert "usb: storage: Add quirk for Samsung Fit flash"

In reply to Sasha Levin

From: sunghwan jung <[email protected]>

[ Upstream commit ad5dbfc123e6ffbbde194e2a4603323e09f741ee ]

This reverts commit 86d92f5465958752481269348d474414dccb1552, which fix the timeout issue for "Samsung Fit Flash".

But the commit affects not only "Samsung Fit Flash" but also other usb storages that use the same controller and causes severe performance regression.

 # hdparm -t /dev/sda (without the quirk)
 Timing buffered disk reads: 622 MB in  3.01 seconds = 206.66 MB/sec
 # hdparm -t /dev/sda (with the quirk)
 Timing buffered disk reads: 220 MB in  3.00 seconds =  73.32 MB/sec

The commit author mentioned that "Issue was reproduced after device has bad block", so this quirk should be applied when we have the timeout issue with a device that has bad blocks.

We revert the commit so that we apply this quirk by adding kernel paramters using a bootloader or other ways when we really need it, without the performance regression with devices that don't have the issue.

---
 drivers/usb/storage/unusual_devs.h | 6 ------
 1 file changed, 6 deletions(-)
drivers/usb/storage/unusual_devs.h +0 -6
index 8c186ab5b5f7..8b38dd7d89b7 100644
@@ -1294,12 +1294,6 @@ UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999,
 		USB_SC_RBC, USB_PR_BULK, NULL,
 		0 ),
 
-UNUSUAL_DEV(0x090c, 0x1000, 0x1100, 0x1100,
-		"Samsung",
-		"Flash Drive FIT",
-		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
-		US_FL_MAX_SECTORS_64),
-
 /* aeb */
 UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
 		"Feiya",
Signature · 1 line
2.35.1
author maintainer
#10 lore raw

PATCH 11/13 staging: rtl8192u: Fix return type of ieee80211_xmit

In reply to Sasha Levin

From: Nathan Huckleberry <[email protected]>

[ Upstream commit 2851349ac351010a2649e0ff86a1e3d68fe5d683 ]

The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev).

The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition.

The return type of ieee80211_xmit should be changed from int to netdev_tx_t.

---
 drivers/staging/rtl8192u/ieee80211/ieee80211.h    | 2 +-
 drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c | 6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)
drivers/staging/rtl8192u/ieee80211/ieee80211.h +1 -1
index b062cad052b9..2e768e21e26b 100644
@@ -2186,7 +2186,7 @@ int ieee80211_set_encryption(struct ieee80211_device *ieee);
 int ieee80211_encrypt_fragment(struct ieee80211_device *ieee,
 			       struct sk_buff *frag, int hdr_len);
 
-int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev);
+netdev_tx_t ieee80211_xmit(struct sk_buff *skb, struct net_device *dev);
 void ieee80211_txb_free(struct ieee80211_txb *txb);
 
 
drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c +3 -3
index f58971a4a2e3..70cc158d79bc 100644
@@ -594,7 +594,7 @@ static void ieee80211_query_seqnum(struct ieee80211_device *ieee,
 	}
 }
 
-int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
+netdev_tx_t ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct ieee80211_device *ieee = netdev_priv(dev);
 	struct ieee80211_txb *txb = NULL;
@@ -902,13 +902,13 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
 			if ((*ieee->hard_start_xmit)(txb, dev) == 0) {
 				stats->tx_packets++;
 				stats->tx_bytes += __le16_to_cpu(txb->payload_size);
-				return 0;
+				return NETDEV_TX_OK;
 			}
 			ieee80211_txb_free(txb);
 		}
 	}
 
-	return 0;
+	return NETDEV_TX_OK;
 
  failed:
 	spin_unlock_irqrestore(&ieee->lock, flags);
Signature · 1 line
2.35.1
#11 lore raw

Re: [PATCH AUTOSEL 4.14 11/13] staging: rtl8192u: Fix return type of ieee80211_xmit

Quoted 9 lines · Sasha Levin

From: Nathan Huckleberry <[email protected]>

[ Upstream commit 2851349ac351010a2649e0ff86a1e3d68fe5d683 ]

The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev).

The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition.

Again, not needed in any stable branches, thanks.

greg k-h

author maintainer
#12 lore raw

PATCH 12/13 staging: octeon: Fix return type of cvm_oct_xmit and cvm_oct_xmit_pow

In reply to Sasha Levin

From: Nathan Huckleberry <[email protected]>

[ Upstream commit b77599043f00fce9253d0f22522c5d5b521555ce ]

The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev).

The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition.

The return type of cvm_oct_xmit and cvm_oct_xmit_pow should be changed from int to netdev_tx_t.

---
 drivers/staging/octeon/ethernet-tx.c | 4 ++--
 drivers/staging/octeon/ethernet-tx.h | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)
drivers/staging/octeon/ethernet-tx.c +2 -2
index 31f35025d19e..19c5c27a3ead 100644
@@ -138,7 +138,7 @@ static void cvm_oct_free_tx_skbs(struct net_device *dev)
  *
  * Returns Always returns NETDEV_TX_OK
  */
-int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
+netdev_tx_t cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	cvmx_pko_command_word0_t pko_command;
 	union cvmx_buf_ptr hw_buffer;
@@ -521,7 +521,7 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
 
  * Returns Always returns zero
  */
-int cvm_oct_xmit_pow(struct sk_buff *skb, struct net_device *dev)
+netdev_tx_t cvm_oct_xmit_pow(struct sk_buff *skb, struct net_device *dev)
 {
 	struct octeon_ethernet *priv = netdev_priv(dev);
 	void *packet_buffer;
drivers/staging/octeon/ethernet-tx.h +2 -2
index 84848e4c1664..65faefc87081 100644
@@ -8,8 +8,8 @@
  * published by the Free Software Foundation.
  */
 
-int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev);
-int cvm_oct_xmit_pow(struct sk_buff *skb, struct net_device *dev);
+netdev_tx_t cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev);
+netdev_tx_t cvm_oct_xmit_pow(struct sk_buff *skb, struct net_device *dev);
 int cvm_oct_transmit_qos(struct net_device *dev, void *work_queue_entry,
 			 int do_free, int qos);
 void cvm_oct_tx_initialize(void);
Signature · 1 line
2.35.1
author maintainer
#13 lore raw

PATCH 13/13 usb: idmouse: fix an uninit-value in idmouse_open

In reply to Sasha Levin

From: Dongliang Mu <[email protected]>

[ Upstream commit bce2b0539933e485d22d6f6f076c0fcd6f185c4c ]

In idmouse_create_image, if any ftip_command fails, it will go to the reset label. However, this leads to the data in bulk_in_buffer[HEADER..IMGSIZE] uninitialized. And the check for valid image incurs an uninitialized dereference.

Fix this by moving the check before reset label since this check only be valid if the data after bulk_in_buffer[HEADER] has concrete data.

Note that this is found by KMSAN, so only kernel compilation is tested.

---
 drivers/usb/misc/idmouse.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/usb/misc/idmouse.c +4 -4
index 01ef2551be46..974b8d0621bd 100644
@@ -182,10 +182,6 @@ static int idmouse_create_image(struct usb_idmouse *dev)
 		bytes_read += bulk_read;
 	}
 
-	/* reset the device */
-reset:
-	ftip_command(dev, FTIP_RELEASE, 0, 0);
-
 	/* check for valid image */
 	/* right border should be black (0x00) */
 	for (bytes_read = sizeof(HEADER)-1 + WIDTH-1; bytes_read < IMGSIZE; bytes_read += WIDTH)
@@ -197,6 +193,10 @@ static int idmouse_create_image(struct usb_idmouse *dev)
 		if (dev->bulk_in_buffer[bytes_read] != 0xFF)
 			return -EAGAIN;
 
+	/* reset the device */
+reset:
+	ftip_command(dev, FTIP_RELEASE, 0, 0);
+
 	/* should be IMGSIZE == 65040 */
 	dev_dbg(&dev->interface->dev, "read %d bytes fingerprint data\n",
 		bytes_read);
Signature · 1 line
2.35.1