Skip to contentSkip to conversation

blk-mq: avoid double ->queue_rq() because of early timeout

PATCH Applied Ming Lei 3 participants 4 messages Oct 26, 2022 – Oct 31, 2022

Subsystems (2)
lore
Share & tools
lore

Ming Lei

author
#0 lore raw

PATCH v3 1/1 blk-mq: avoid double ->queue_rq() because of early timeout

From: David Jeffery <[email protected]>

David Jeffery found one double ->queue_rq() issue, so far it can be triggered in VM use case because of long vmexit latency or preempt latency of vCPU pthread or long page fault in vCPU pthread, then block IO req could be timed out before queuing the request to hardware but after calling blk_mq_start_request() during ->queue_rq(), then timeout handler may handle it by requeue, then double ->queue_rq() is caused, and kernel panic.

So far, it is driver's responsibility to cover the race between timeout and completion, so it seems supposed to be solved in driver in theory, given driver has enough knowledge.

But it is really one common problem, lots of driver could have similar issue, and could be hard to fix all affected drivers, even it isn't easy for driver to handle the race. So David suggests this patch by draining in-progress ->queue_rq() for solving this issue.

Cc Stefan Hajnoczi <[email protected]>
Cc Keith Busch <[email protected]>
Cc Bart Van Assche <[email protected]>

---
V3:
- add callback for handle expired only, suggested by Keith Busch
V2:
- follow Jens's suggestion to run sync rcu only if there is timeout
- rename 'now' as 'start_timeout'

 block/blk-mq.c | 56 +++++++++++++++++++++++++++++++++++++++-----------
 1 file changed, 44 insertions(+), 12 deletions(-)
block/blk-mq.c +44 -12
index 33292c01875d..030bbb8deca6 100644
@@ -1523,7 +1523,13 @@ static void blk_mq_rq_timed_out(struct request *req)
 	blk_add_timer(req);
 }
 
-static bool blk_mq_req_expired(struct request *rq, unsigned long *next)
+struct blk_expired_data {
+	bool has_timedout_rq;
+	unsigned long next;
+	unsigned long timeout_start;
+};
+
+static bool blk_mq_req_expired(struct request *rq, struct blk_expired_data *expired)
 {
 	unsigned long deadline;
 
@@ -1533,13 +1539,13 @@ static bool blk_mq_req_expired(struct request *rq, unsigned long *next)
 		return false;
 
 	deadline = READ_ONCE(rq->deadline);
-	if (time_after_eq(jiffies, deadline))
+	if (time_after_eq(expired->timeout_start, deadline))
 		return true;
 
-	if (*next == 0)
-		*next = deadline;
-	else if (time_after(*next, deadline))
-		*next = deadline;
+	if (expired->next == 0)
+		expired->next = deadline;
+	else if (time_after(expired->next, deadline))
+		expired->next = deadline;
 	return false;
 }
 
@@ -1555,7 +1561,7 @@ void blk_mq_put_rq_ref(struct request *rq)
 
 static bool blk_mq_check_expired(struct request *rq, void *priv)
 {
-	unsigned long *next = priv;
+	struct blk_expired_data *expired = priv;
 
 	/*
 	 * blk_mq_queue_tag_busy_iter() has locked the request, so it cannot
@@ -1564,7 +1570,18 @@ static bool blk_mq_check_expired(struct request *rq, void *priv)
 	 * it was completed and reallocated as a new request after returning
 	 * from blk_mq_check_expired().
 	 */
-	if (blk_mq_req_expired(rq, next))
+	if (blk_mq_req_expired(rq, expired)) {
+		expired->has_timedout_rq = true;
+		return false;
+	}
+	return true;
+}
+
+static bool blk_mq_handle_expired(struct request *rq, void *priv)
+{
+	struct blk_expired_data *expired = priv;
+
+	if (blk_mq_req_expired(rq, expired))
 		blk_mq_rq_timed_out(rq);
 	return true;
 }
@@ -1573,7 +1590,9 @@ static void blk_mq_timeout_work(struct work_struct *work)
 {
 	struct request_queue *q =
 		container_of(work, struct request_queue, timeout_work);
-	unsigned long next = 0;
+	struct blk_expired_data expired = {
+		.timeout_start = jiffies,
+	};
 	struct blk_mq_hw_ctx *hctx;
 	unsigned long i;
 
@@ -1593,10 +1612,23 @@ static void blk_mq_timeout_work(struct work_struct *work)
 	if (!percpu_ref_tryget(&q->q_usage_counter))
 		return;
 
-	blk_mq_queue_tag_busy_iter(q, blk_mq_check_expired, &next);
+	/* check if there is any timed-out request */
+	blk_mq_queue_tag_busy_iter(q, blk_mq_check_expired, &expired);
+	if (expired.has_timedout_rq) {
+		/*
+		 * Before walking tags, we must ensure any submit started
+		 * before the current time has finished. Since the submit
+		 * uses srcu or rcu, wait for a synchronization point to
+		 * ensure all running submits have finished
+		 */
+		blk_mq_wait_quiesce_done(q);
+
+		expired.next = 0;
+		blk_mq_queue_tag_busy_iter(q, blk_mq_handle_expired, &expired);
+	}
 
-	if (next != 0) {
-		mod_timer(&q->timeout, next);
+	if (expired.next != 0) {
+		mod_timer(&q->timeout, expired.next);
 	} else {
 		/*
 		 * Request timeouts are handled as a forward rolling timer. If
Signature · 6 lines
2.31.1

_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Reviewed-by on v3 1/1
#1 lore raw
Quoted 8 lines · Ming Lei

David Jeffery found one double ->queue_rq() issue, so far it can be triggered in VM use case because of long vmexit latency or preempt latency of vCPU pthread or long page fault in vCPU pthread, then block IO req could be timed out before queuing the request to hardware but after calling blk_mq_start_request() during ->queue_rq(), then timeout handler may handle it by requeue, then double ->queue_rq() is caused, and kernel panic.

Quoted 8 lines

So far, it is driver's responsibility to cover the race between timeout and completion, so it seems supposed to be solved in driver in theory, given driver has enough knowledge.

But it is really one common problem, lots of driver could have similar issue, and could be hard to fix all affected drivers, even it isn't easy for driver to handle the race. So David suggests this patch by draining in-progress ->queue_rq() for solving this issue.

Nice work.

author
#2 lore raw
In reply to Ming Lei
Quoted 25 lines · Ming Lei

From: David Jeffery <[email protected]>

David Jeffery found one double ->queue_rq() issue, so far it can be triggered in VM use case because of long vmexit latency or preempt latency of vCPU pthread or long page fault in vCPU pthread, then block IO req could be timed out before queuing the request to hardware but after calling blk_mq_start_request() during ->queue_rq(), then timeout handler may handle it by requeue, then double ->queue_rq() is caused, and kernel panic.

So far, it is driver's responsibility to cover the race between timeout and completion, so it seems supposed to be solved in driver in theory, given driver has enough knowledge.

But it is really one common problem, lots of driver could have similar issue, and could be hard to fix all affected drivers, even it isn't easy for driver to handle the race. So David suggests this patch by draining in-progress ->queue_rq() for solving this issue.

Cc Stefan Hajnoczi <[email protected]>
Cc Keith Busch <[email protected]>
Cc Bart Van Assche <[email protected]>
Quoted 3 lines

---
V3:
- add callback for handle expired only, suggested by Keith Busch

Hi Jens,

Any chance to merge this fix? Either 6.1 or 6.2 is fine for me.

Thanks,
Ming

_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

maintainer Applied
#3 lore raw
In reply to Ming Lei
Quoted 11 lines · Ming Lei

From: David Jeffery <[email protected]>

David Jeffery found one double ->queue_rq() issue, so far it can be triggered in VM use case because of long vmexit latency or preempt latency of vCPU pthread or long page fault in vCPU pthread, then block IO req could be timed out before queuing the request to hardware but after calling blk_mq_start_request() during ->queue_rq(), then timeout handler may handle it by requeue, then double ->queue_rq() is caused, and kernel panic.

[...]

Applied, thanks!

[1/1] blk-mq: avoid double ->queue_rq() because of early timeout

      commit: 82c229476b8f6afd7e09bc4dc77d89dc19ff7688

Best regards,

Signature · 1 line
Jens Axboe