Skip to contentSkip to conversation

Various cleanups for mlx5

PATCH In review Leon Romanovsky 2 participants 12 messages Oct 24, 2022 – Oct 27, 2022

Subsystems (5)
Networking Network drivers Mellanox mlx5 core Mellanox Ethernet driver (mlx5e) +1 more subsystems
lore
Share & tools
lore

Leon Romanovsky

author
#0 lore raw

cover Various cleanups for mlx5

From: Leon Romanovsky <[email protected]>

Changelog:
v1:
Patch #1:
* Removed extra blank line
* Removed ipsec initialization for uplink
v0: https://lore.kernel.org/all/[email protected]
-----------------------------------------------------------------------

Hi,

This is a batch of various cleanups which I collected during development of mlx5 IPsec full offload support.

Thanks.

Leon Romanovsky (6):
net/mlx5e: Support devlink reload of IPsec core net/mlx5: Return ready to use ASO WQE net/mlx5e: Don't access directly DMA device pointer net/mlx5e: Delete always true DMA check net/mlx5: Remove redundant check
net/mlx5e: Use read lock for eswitch get callbacks

 .../ethernet/mellanox/mlx5/core/en/tc/meter.c   |  1 -
 .../mellanox/mlx5/core/en_accel/ipsec.c         | 17 ++++++++---------
 .../mellanox/mlx5/core/en_accel/ipsec.h         |  5 ++---
 .../mellanox/mlx5/core/en_accel/macsec.c        | 11 +++++------
 .../net/ethernet/mellanox/mlx5/core/en_main.c   |  7 ++-----
 .../net/ethernet/mellanox/mlx5/core/en_rep.c    |  9 +++------
 .../mellanox/mlx5/core/eswitch_offloads.c       | 12 ++++++------
 .../net/ethernet/mellanox/mlx5/core/lib/aso.c   | 10 +++++-----
 .../net/ethernet/mellanox/mlx5/core/lib/aso.h   |  2 +-
 9 files changed, 32 insertions(+), 42 deletions(-)
Signature · 1 line
2.37.3
author
#1 lore raw

PATCH 1/6 net/mlx5e: Support devlink reload of IPsec core

From: Leon Romanovsky <[email protected]>

Change IPsec initialization flow to allow future creation of hardware resources that should be released and allocated during devlink reload operation. As part of that change, update function signature to be void as no callers are actually interested in it.

Signed-off-by Leon Romanovsky <[email protected]>
---
 .../mellanox/mlx5/core/en_accel/ipsec.c         | 17 ++++++++---------
 .../mellanox/mlx5/core/en_accel/ipsec.h         |  5 ++---
 .../net/ethernet/mellanox/mlx5/core/en_main.c   |  7 ++-----
 .../net/ethernet/mellanox/mlx5/core/en_rep.c    |  9 +++------
 4 files changed, 15 insertions(+), 23 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c +8 -9
index 2a8fd7020622..325b56ff3e8c 100644
@@ -348,29 +348,27 @@ static void mlx5e_xfrm_free_state(struct xfrm_state *x)
 	kfree(sa_entry);
 }
 
-int mlx5e_ipsec_init(struct mlx5e_priv *priv)
+void mlx5e_ipsec_init(struct mlx5e_priv *priv)
 {
 	struct mlx5e_ipsec *ipsec;
-	int ret;
+	int ret = -ENOMEM;
 
 	if (!mlx5_ipsec_device_caps(priv->mdev)) {
 		netdev_dbg(priv->netdev, "Not an IPSec offload device\n");
-		return 0;
+		return;
 	}
 
 	ipsec = kzalloc(sizeof(*ipsec), GFP_KERNEL);
 	if (!ipsec)
-		return -ENOMEM;
+		return;
 
 	hash_init(ipsec->sadb_rx);
 	spin_lock_init(&ipsec->sadb_rx_lock);
 	ipsec->mdev = priv->mdev;
 	ipsec->wq = alloc_ordered_workqueue("mlx5e_ipsec: %s", 0,
 					    priv->netdev->name);
-	if (!ipsec->wq) {
-		ret = -ENOMEM;
+	if (!ipsec->wq)
 		goto err_wq;
-	}
 
 	ret = mlx5e_accel_ipsec_fs_init(ipsec);
 	if (ret)

@@ -378,13 +376,14 @@ int mlx5e_ipsec_init(struct mlx5e_priv *priv)
 
 	priv->ipsec = ipsec;
 	netdev_dbg(priv->netdev, "IPSec attached to netdevice\n");
-	return 0;
+	return;
 
 err_fs_init:
 	destroy_workqueue(ipsec->wq);
 err_wq:
 	kfree(ipsec);
-	return (ret != -EOPNOTSUPP) ? ret : 0;
+	mlx5_core_err(priv->mdev, "IPSec initialization failed, %d\n", ret);
+	return;
 }
 
 void mlx5e_ipsec_cleanup(struct mlx5e_priv *priv)
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h +2 -3
index 16bcceec16c4..4c47347d0ee2 100644
@@ -146,7 +146,7 @@ struct mlx5e_ipsec_sa_entry {
 	struct mlx5e_ipsec_modify_state_work modify_work;
 };
 
-int mlx5e_ipsec_init(struct mlx5e_priv *priv);
+void mlx5e_ipsec_init(struct mlx5e_priv *priv);
 void mlx5e_ipsec_cleanup(struct mlx5e_priv *priv);
 void mlx5e_ipsec_build_netdev(struct mlx5e_priv *priv);
 

@@ -174,9 +174,8 @@ mlx5e_ipsec_sa2dev(struct mlx5e_ipsec_sa_entry *sa_entry)
 	return sa_entry->ipsec->mdev;
 }
 #else
-static inline int mlx5e_ipsec_init(struct mlx5e_priv *priv)
+static inline void mlx5e_ipsec_init(struct mlx5e_priv *priv)
 {
-	return 0;
 }
 
 static inline void mlx5e_ipsec_cleanup(struct mlx5e_priv *priv)
drivers/net/ethernet/mellanox/mlx5/core/en_main.c +2 -5
index 364f04309149..6a97d0d96bf8 100644
@@ -5225,10 +5225,6 @@ static int mlx5e_nic_init(struct mlx5_core_dev *mdev,
 	}
 	priv->fs = fs;
 
-	err = mlx5e_ipsec_init(priv);
-	if (err)
-		mlx5_core_err(mdev, "IPSec initialization failed, %d\n", err);
-
 	err = mlx5e_ktls_init(priv);
 	if (err)
 		mlx5_core_err(mdev, "TLS initialization failed, %d\n", err);

@@ -5241,7 +5237,6 @@ static void mlx5e_nic_cleanup(struct mlx5e_priv *priv)
 {
 	mlx5e_health_destroy_reporters(priv);
 	mlx5e_ktls_cleanup(priv);
-	mlx5e_ipsec_cleanup(priv);
 	mlx5e_fs_cleanup(priv->fs);
 }
 

@@ -5370,6 +5365,7 @@ static void mlx5e_nic_enable(struct mlx5e_priv *priv)
 	int err;
 
 	mlx5e_fs_init_l2_addr(priv->fs, netdev);
+	mlx5e_ipsec_init(priv);
 
 	err = mlx5e_macsec_init(priv);
 	if (err)

@@ -5433,6 +5429,7 @@ static void mlx5e_nic_disable(struct mlx5e_priv *priv)
 	mlx5_lag_remove_netdev(mdev, priv->netdev);
 	mlx5_vxlan_reset_to_default(mdev->vxlan);
 	mlx5e_macsec_cleanup(priv);
+	mlx5e_ipsec_cleanup(priv);
 }
 
 int mlx5e_update_nic_rx(struct mlx5e_priv *priv)
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +3 -6
index 794cd8dfe9c9..324e5759b049 100644
@@ -761,7 +761,6 @@ static int mlx5e_init_ul_rep(struct mlx5_core_dev *mdev,
 			     struct net_device *netdev)
 {
 	struct mlx5e_priv *priv = netdev_priv(netdev);
-	int err;
 
 	priv->fs = mlx5e_fs_init(priv->profile, mdev,
 				 !test_bit(MLX5E_STATE_DESTROYING, &priv->state));

@@ -770,10 +769,6 @@ static int mlx5e_init_ul_rep(struct mlx5_core_dev *mdev,
 		return -ENOMEM;
 	}
 
-	err = mlx5e_ipsec_init(priv);
-	if (err)
-		mlx5_core_err(mdev, "Uplink rep IPsec initialization failed, %d\n", err);
-
 	mlx5e_vxlan_set_netdev_info(priv);
 	mlx5e_build_rep_params(netdev);
 	mlx5e_timestamp_init(priv);

@@ -783,7 +778,6 @@ static int mlx5e_init_ul_rep(struct mlx5_core_dev *mdev,
 static void mlx5e_cleanup_rep(struct mlx5e_priv *priv)
 {
 	mlx5e_fs_cleanup(priv->fs);
-	mlx5e_ipsec_cleanup(priv);
 }
 
 static int mlx5e_create_rep_ttc_table(struct mlx5e_priv *priv)

@@ -1074,6 +1068,8 @@ static void mlx5e_rep_enable(struct mlx5e_priv *priv)
 {
 	struct mlx5e_rep_priv *rpriv = priv->ppriv;
 
+	mlx5e_ipsec_init(priv);
+
 	mlx5e_set_netdev_mtu_boundaries(priv);
 	mlx5e_rep_neigh_init(rpriv);
 }

@@ -1083,6 +1079,7 @@ static void mlx5e_rep_disable(struct mlx5e_priv *priv)
 	struct mlx5e_rep_priv *rpriv = priv->ppriv;
 
 	mlx5e_rep_neigh_cleanup(rpriv);
+	mlx5e_ipsec_cleanup(priv);
 }
 
 static int mlx5e_update_rep_rx(struct mlx5e_priv *priv)
Signature · 1 line
2.37.3
#2 lore raw

Re: [PATCH net-next v1 1/6] net/mlx5e: Support devlink reload of IPsec core

Quoted 9 lines · Leon Romanovsky

From: Leon Romanovsky <[email protected]>

Change IPsec initialization flow to allow future creation of hardware resources that should be released and allocated during devlink reload operation. As part of that change, update function signature to be void as no callers are actually interested in it.

Signed-off-by Leon Romanovsky <[email protected]>

---

...

Quoted 13 lines
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +0 -1
index 794cd8dfe9c9..324e5759b049 100644
@@ -761,7 +761,6 @@ static int mlx5e_init_ul_rep(struct mlx5_core_dev *mdev,
 			     struct net_device *netdev)
 {
 	struct mlx5e_priv *priv = netdev_priv(netdev);
-	int err;
 
 	priv->fs = mlx5e_fs_init(priv->profile, mdev,
 				 !test_bit(MLX5E_STATE_DESTROYING, &priv->state));

drivers/net/ethernet/mellanox/mlx5/core/en_rep.c static int mlx5e_init_ul_rep(struct mlx5_core_dev *mdev, · line 776

Quoted 7 lines
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +0 -4
@@ -770,10 +769,6 @@ static int mlx5e_init_ul_rep(struct mlx5_core_dev *mdev,
 		return -ENOMEM;
 	}
 
-	err = mlx5e_ipsec_init(priv);
-	if (err)
-		mlx5_core_err(mdev, "Uplink rep IPsec initialization failed, %d\n", err);
-

Original code had ipsec enabled for uplink rep and nic profile only, but not other vport reps. your below code will enable ipsec and alloc resources for other vport reps, which will be a huge waste of memory and hw resources on switchdev system with lots of vports.

Please make sure not to enable ipsec on ALL reps.

drivers/net/ethernet/mellanox/mlx5/core/en_rep.c static void mlx5e_rep_enable(struct mlx5e_priv *priv)

Quoted 12 lines
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +0 -1
 	mlx5e_vxlan_set_netdev_info(priv);
 	mlx5e_build_rep_params(netdev);
 	mlx5e_timestamp_init(priv);

@@ -783,7 +778,6 @@ static int mlx5e_init_ul_rep(struct mlx5_core_dev *mdev,
 static void mlx5e_cleanup_rep(struct mlx5e_priv *priv)
 {
 	mlx5e_fs_cleanup(priv->fs);
-	mlx5e_ipsec_cleanup(priv);
 }
 
 static int mlx5e_create_rep_ttc_table(struct mlx5e_priv *priv)

@@ -1074,6 +1068,8 @@ static void mlx5e_rep_enable(struct mlx5e_priv *priv)

this function isn't invoked from uplink rep, so you broke functionality.

Quoted 19 lines
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +3 -0
 {
 	struct mlx5e_rep_priv *rpriv = priv->ppriv;
 
+	mlx5e_ipsec_init(priv);
+
 	mlx5e_set_netdev_mtu_boundaries(priv);
 	mlx5e_rep_neigh_init(rpriv);
 }

@@ -1083,6 +1079,7 @@ static void mlx5e_rep_disable(struct mlx5e_priv *priv)
 	struct mlx5e_rep_priv *rpriv = priv->ppriv;
 
 	mlx5e_rep_neigh_cleanup(rpriv);
+	mlx5e_ipsec_cleanup(priv);
 }
 
 static int mlx5e_update_rep_rx(struct mlx5e_priv *priv)
Signature · 1 line
2.37.3
author
#3 lore raw

PATCH 2/6 net/mlx5: Return ready to use ASO WQE

In reply to Leon Romanovsky

From: Leon Romanovsky <[email protected]>

There is no need in hiding returned ASO WQE type by providing void*, use the real type instead. Do it together with zeroing that memory, so ASO WQE will be ready to use immediately.

Signed-off-by Leon Romanovsky <[email protected]>
---
 drivers/net/ethernet/mellanox/mlx5/core/en/tc/meter.c | 1 -
 drivers/net/ethernet/mellanox/mlx5/core/lib/aso.c     | 7 +++++--
 drivers/net/ethernet/mellanox/mlx5/core/lib/aso.h     | 2 +-
 3 files changed, 6 insertions(+), 4 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/en/tc/meter.c +0 -1
index be74e1403328..25cd449e8aad 100644
@@ -162,7 +162,6 @@ mlx5e_tc_meter_modify(struct mlx5_core_dev *mdev,
 			   MLX5_ACCESS_ASO_OPC_MOD_FLOW_METER);
 
 	aso_ctrl = &aso_wqe->aso_ctrl;
-	memset(aso_ctrl, 0, sizeof(*aso_ctrl));
 	aso_ctrl->data_mask_mode = MLX5_ASO_DATA_MASK_MODE_BYTEWISE_64BYTE << 6;
 	aso_ctrl->condition_1_0_operand = MLX5_ASO_ALWAYS_TRUE |
 					  MLX5_ASO_ALWAYS_TRUE << 4;
drivers/net/ethernet/mellanox/mlx5/core/lib/aso.c +5 -2
index baa8092f335e..88655d5746d6 100644
@@ -349,12 +349,15 @@ void mlx5_aso_build_wqe(struct mlx5_aso *aso, u8 ds_cnt,
 	cseg->general_id = cpu_to_be32(obj_id);
 }
 
-void *mlx5_aso_get_wqe(struct mlx5_aso *aso)
+struct mlx5_aso_wqe *mlx5_aso_get_wqe(struct mlx5_aso *aso)
 {
+	struct mlx5_aso_wqe *wqe;
 	u16 pi;
 
 	pi = mlx5_wq_cyc_ctr2ix(&aso->wq, aso->pc);
-	return mlx5_wq_cyc_get_wqe(&aso->wq, pi);
+	wqe = mlx5_wq_cyc_get_wqe(&aso->wq, pi);
+	memset(wqe, 0, sizeof(*wqe));
+	return wqe;
 }
 
 void mlx5_aso_post_wqe(struct mlx5_aso *aso, bool with_data,
drivers/net/ethernet/mellanox/mlx5/core/lib/aso.h +1 -1
index 2d40dcf9d42e..4312614bf3bc 100644
@@ -77,7 +77,7 @@ enum {
 
 struct mlx5_aso;
 
-void *mlx5_aso_get_wqe(struct mlx5_aso *aso);
+struct mlx5_aso_wqe *mlx5_aso_get_wqe(struct mlx5_aso *aso);
 void mlx5_aso_build_wqe(struct mlx5_aso *aso, u8 ds_cnt,
 			struct mlx5_aso_wqe *aso_wqe,
 			u32 obj_id, u32 opc_mode);
Signature · 1 line
2.37.3
author
#4 lore raw

PATCH 3/6 net/mlx5e: Don't access directly DMA device pointer

In reply to Leon Romanovsky

From: Leon Romanovsky <[email protected]>

Use specialized helper to fetch DMA device pointer.

Signed-off-by Leon Romanovsky <[email protected]>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec.c +1 -1
index 41970067917b..4831a3e9556c 100644
@@ -186,7 +186,7 @@ static int mlx5e_macsec_aso_reg_mr(struct mlx5_core_dev *mdev, struct mlx5e_macs
 		return err;
 	}
 
-	dma_device = &mdev->pdev->dev;
+	dma_device = mlx5_core_dma_dev(mdev);
 	dma_addr = dma_map_single(dma_device, umr->ctx, sizeof(umr->ctx), DMA_BIDIRECTIONAL);
 	err = dma_mapping_error(dma_device, dma_addr);
 	if (err) {
Signature · 1 line
2.37.3
author
#5 lore raw

PATCH 4/6 net/mlx5e: Delete always true DMA check

In reply to Leon Romanovsky

From: Leon Romanovsky <[email protected]>

DMA address always exists for MACsec ASO object.

Signed-off-by Leon Romanovsky <[email protected]>
---
 .../net/ethernet/mellanox/mlx5/core/en_accel/macsec.c    | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec.c +4 -5
index 4831a3e9556c..f1e77ebd8630 100644
@@ -1304,11 +1304,10 @@ static void macsec_aso_build_wqe_ctrl_seg(struct mlx5e_macsec_aso *macsec_aso,
 					  struct mlx5_aso_ctrl_param *param)
 {
 	memset(aso_ctrl, 0, sizeof(*aso_ctrl));
-	if (macsec_aso->umr->dma_addr) {
-		aso_ctrl->va_l  = cpu_to_be32(macsec_aso->umr->dma_addr | ASO_CTRL_READ_EN);
-		aso_ctrl->va_h  = cpu_to_be32((u64)macsec_aso->umr->dma_addr >> 32);
-		aso_ctrl->l_key = cpu_to_be32(macsec_aso->umr->mkey);
-	}
+	aso_ctrl->va_l =
+		cpu_to_be32(macsec_aso->umr->dma_addr | ASO_CTRL_READ_EN);
+	aso_ctrl->va_h = cpu_to_be32((u64)macsec_aso->umr->dma_addr >> 32);
+	aso_ctrl->l_key = cpu_to_be32(macsec_aso->umr->mkey);
 
 	if (!param)
 		return;
Signature · 1 line
2.37.3
author
#6 lore raw

PATCH 5/6 net/mlx5: Remove redundant check

In reply to Leon Romanovsky

From: Leon Romanovsky <[email protected]>

If ASO failed in creation, it won't be called to destroy either. The kernel coding pattern is to make sure that callers are calling to destroy only for valid objects.

Signed-off-by Leon Romanovsky <[email protected]>
---
 drivers/net/ethernet/mellanox/mlx5/core/lib/aso.c | 3 ---
 1 file changed, 3 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/lib/aso.c +0 -3
index 88655d5746d6..87605f142a20 100644
@@ -327,9 +327,6 @@ struct mlx5_aso *mlx5_aso_create(struct mlx5_core_dev *mdev, u32 pdn)
 
 void mlx5_aso_destroy(struct mlx5_aso *aso)
 {
-	if (IS_ERR_OR_NULL(aso))
-		return;
-
 	mlx5_aso_destroy_sq(aso);
 	mlx5_aso_destroy_cq(&aso->cq);
 	kfree(aso);
Signature · 1 line
2.37.3
author
#7 lore raw

PATCH 6/6 net/mlx5e: Use read lock for eswitch get callbacks

In reply to Leon Romanovsky

From: Leon Romanovsky <[email protected]>

In commit 367dfa121205 ("net/mlx5: Remove devl_unlock from mlx5_eswtich_mode_callback_enter") all functions were converted to use write lock without relation to their actual purpose.

Change the devlink eswitch getters to use read and not write locks.

Signed-off-by Leon Romanovsky <[email protected]>
---
 .../ethernet/mellanox/mlx5/core/eswitch_offloads.c   | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c +6 -6
index 4e50df3139c6..23ada3a71c60 100644
@@ -3553,9 +3553,9 @@ int mlx5_devlink_eswitch_mode_get(struct devlink *devlink, u16 *mode)
 	if (IS_ERR(esw))
 		return PTR_ERR(esw);
 
-	down_write(&esw->mode_lock);
+	down_read(&esw->mode_lock);
 	err = esw_mode_to_devlink(esw->mode, mode);
-	up_write(&esw->mode_lock);
+	up_read(&esw->mode_lock);
 	return err;
 }
 

@@ -3653,9 +3653,9 @@ int mlx5_devlink_eswitch_inline_mode_get(struct devlink *devlink, u8 *mode)
 	if (IS_ERR(esw))
 		return PTR_ERR(esw);
 
-	down_write(&esw->mode_lock);
+	down_read(&esw->mode_lock);
 	err = esw_inline_mode_to_devlink(esw->offloads.inline_mode, mode);
-	up_write(&esw->mode_lock);
+	up_read(&esw->mode_lock);
 	return err;
 }
 

@@ -3727,9 +3727,9 @@ int mlx5_devlink_eswitch_encap_mode_get(struct devlink *devlink,
 	if (IS_ERR(esw))
 		return PTR_ERR(esw);
 
-	down_write(&esw->mode_lock);
+	down_read(&esw->mode_lock);
 	*encap = esw->offloads.encap;
-	up_write(&esw->mode_lock);
+	up_read(&esw->mode_lock);
 	return 0;
 }
Signature · 1 line
2.37.3
#8 lore raw
In reply to Leon Romanovsky
Quoted 7 lines · Leon Romanovsky

From: Leon Romanovsky <[email protected]>

Changelog:
v1:
Patch #1:
* Removed extra blank line
* Removed ipsec initialization for uplink

This will break functionality, ipsec should only be enabled on nic and uplink but not on other vport representors.

Leon let's finish review internally, this series has to go through my trees anyways.

author
#9 lore raw
Quoted 11 lines · Saeed Mahameed
Quoted 7 lines · Leon Romanovsky

From: Leon Romanovsky <[email protected]>

Changelog:
v1:
Patch #1:
* Removed extra blank line
* Removed ipsec initialization for uplink

This will break functionality, ipsec should only be enabled on nic and uplink but not on other vport representors.

I didn't hear any complain from verification. The devlink patch is in my tree for months already.

Quoted 3 lines

Leon let's finish review internally, this series has to go through my trees anyways.

What about other 5 patches? Let's progress with them, please.

Thanks

Quoted 2 lines
#10 lore raw
Quoted 10 lines · Leon Romanovsky
Quoted 9 lines · Saeed Mahameed
Quoted 7 lines · Leon Romanovsky

From: Leon Romanovsky <[email protected]>

Changelog:
v1:
Patch #1:
* Removed extra blank line
* Removed ipsec initialization for uplink

Quoted 6 lines
Quoted 2 lines

This will break functionality, ipsec should only be enabled on nic and uplink but not on other vport representors.

I didn't hear any complain from verification. The devlink patch is in my tree for months already.

the regression is clear in the code. Ask Raed he added the functionality for uplink.

Quoted 6 lines
Quoted 3 lines

Leon let's finish review internally, this series has to go through my trees anyways.

What about other 5 patches? Let's progress with them, please.

Sure, I will take other patches into my tree, but please let's do internal reviews next time, no need to clutter ML with mlx5 specific stuff.

author
#11 lore raw
Quoted 14 lines · Saeed Mahameed
Quoted 13 lines · Leon Romanovsky
Quoted 11 lines · Saeed Mahameed
Quoted 7 lines · Leon Romanovsky

From: Leon Romanovsky <[email protected]>

Changelog:
v1:
Patch #1:
* Removed extra blank line
* Removed ipsec initialization for uplink

This will break functionality, ipsec should only be enabled on nic and uplink but not on other vport representors.

Quoted 6 lines
Quoted 3 lines

I didn't hear any complain from verification. The devlink patch is in my tree for months already.

the regression is clear in the code. Ask Raed he added the functionality for uplink.

Just to wrap this discussion. Last half a year or so, all IPsec bugs found internally are assigned on me.

Thanks