arm64: tegra: Enable PWM3 for Jetson Orin
Subsystems (2)
Jon Hunter
maintainerPATCH 1/1 arm64: tegra: Enable PWM3 for Jetson Orin
Enable PMW3 for the Jetson AGX Orin platform which is used for operating the PWM Fan.
Signed-off-by Jon Hunter <[email protected]>
--- .../boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts | 6 ++++++ 1 file changed, 6 insertions(+)
arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts +6 -0
@@ -2012,6 +2012,12 @@ serial@31d0000 { status = "okay"; }; + pwm@32a0000 { + assigned-clocks = <&bpmp TEGRA234_CLK_PWM3>; + assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>; + status = "okay"; + }; + hda@3510000 { nvidia,model = "NVIDIA Jetson AGX Orin HDA"; status = "okay";
Signature · 1 line
2.25.1
Quoted 7 lines · Jon Hunter
Enable PMW3 for the Jetson AGX Orin platform which is used for operating the PWM Fan.
Signed-off-by Jon Hunter <[email protected]>--- .../boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts | 6 ++++++ 1 file changed, 6 insertions(+)
I've squashed this into the same patch that enables the fan.
Thanks,
Thierry