ina3221: add support for summation channel control
Subsystems (2)
PATCH 1/1 ina3221: add support for summation channel control
Add support to initialize summation channel control via kernel device tree property "summation-bypass". The channel which has this property is excluded from channel summation.
--- .../devicetree/bindings/hwmon/ina3221.txt | 2 ++ drivers/hwmon/ina3221.c | 14 ++++++++++++-- 2 files changed, 14 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/hwmon/ina3221.txt +2 -0
@@ -29,6 +29,7 @@ Texas Instruments INA3221 Device Tree Bindings Optional properties: - label: Name of the input source - shunt-resistor-micro-ohms: Shunt resistor value in micro-Ohm + - summation-bypass: exclude from channel summation. Example:
@@ -41,6 +42,7 @@ ina3221@40 { input@0 { reg = <0x0>; status = "disabled"; + summation-bypass; }; input@1 { reg = <0x1>;
drivers/hwmon/ina3221.c +12 -2
@@ -104,6 +104,7 @@ struct ina3221_input {const char *label;int shunt_resistor;bool disconnected; +bool summation_bypass; };/**
@@ -125,6 +126,7 @@ struct ina3221_data {struct mutex lock;u32 reg_config;int summation_shunt_resistor; +u32 summation_channel_control;bool single_shot; };
@@ -154,7 +156,8 @@ static inline int ina3221_summation_shunt_resistor(struct ina3221_data *ina)int i, shunt_resistor =0 ;for (i =0 ; i <INA3221_NUM_CHANNELS ; i++) { -if (input[i].disconnected || !input[i].shunt_resistor) +if (input[i].disconnected || !input[i].shunt_resistor || + input[i].summation_bypass)continue ;if (!shunt_resistor) {/* Found the reference shunt resistor value */
@@ -786,6 +789,9 @@ static int ina3221_probe_child_from_dt(struct device *dev,/* Save the connected input label if available */ of_property_read_string (child,"label" , &input->label); +/* summation channel control */ + input->summation_bypass =of_property_read_bool (child,"summation-bypass" ); +/* Overwrite default shunt resistor value optionally */ if (!of_property_read_u32 (child,"shunt-resistor-micro-ohms" , &val)) {if (val <1 || val >INT_MAX ) {
@@ -873,6 +879,10 @@ static int ina3221_probe(struct i2c_client *client)/* Initialize summation_shunt_resistor for summation channel control */ ina->summation_shunt_resistor =ina3221_summation_shunt_resistor (ina); +for (i =0 ; i <INA3221_NUM_CHANNELS ; i++) { +if (!ina->inputs[i].summation_bypass) + ina->summation_channel_control |= (BIT (14 - i)); + } ina->pm_dev = dev;mutex_init (&ina->lock);
@@ -984,7 +994,7 @@ static int ina3221_resume(struct device *dev)*/ ret =regmap_update_bits (ina->regmap,INA3221_MASK_ENABLE ,INA3221_MASK_ENABLE_SCC_MASK , -INA3221_MASK_ENABLE_SCC_MASK ); + ina->summation_channel_control);if (ret) {dev_err (dev,"Unable to control summation channel\n" );return ret;
Signature · 1 line
2.17.1
Quoted 5 lines · Ninad Malwade
Add support to initialize summation channel control via kernel device tree property "summation-bypass". The channel which has this property is excluded from channel summation.
Signed-off-by Ninad Malwade <[email protected]>
Please use scripts/get_maintainers.pl to get a list of necessary people and lists to CC. It might happen, that command when run on an older kernel, gives you outdated entries. Therefore please be sure you base your patches on recent Linux kernel.
You skipped not only one, but all DT maintainers and mailing lists...
Quoted 3 lines
--- .../devicetree/bindings/hwmon/ina3221.txt | 2 ++ drivers/hwmon/ina3221.c | 14 ++++++++++++--
DT bindings and driver changes are separate patches.
Documentation/devicetree/bindings/hwmon/ina3221.txt Texas Instruments INA3221 Device Tree Bindings · line 32
Quoted 11 lines
2 files changed, 14 insertions(+), 2 deletions(-)Documentation/devicetree/bindings/hwmon/ina3221.txt +1
-0@@ -29,6 +29,7 @@ Texas Instruments INA3221 Device Tree Bindings Optional properties: - label: Name of the input source - shunt-resistor-micro-ohms: Shunt resistor value in micro-Ohm + - summation-bypass: exclude from channel summation.
Convert to DT schema first.
Best regards,
Krzysztof
Quoted 23 lines · Krzysztof Kozlowski
Quoted 5 lines · Ninad Malwade
Add support to initialize summation channel control via kernel device tree property "summation-bypass". The channel which has this property is excluded from channel summation.
Signed-off-by Ninad Malwade <[email protected]>Please use
scripts/get_maintainers.plto get a list of necessary people and lists to CC. It might happen, that command when run on an older kernel, gives you outdated entries. Therefore please be sure you base your patches on recent Linux kernel.You skipped not only one, but all DT maintainers and mailing lists...
Quoted 3 lines
--- .../devicetree/bindings/hwmon/ina3221.txt | 2 ++ drivers/hwmon/ina3221.c | 14 ++++++++++++--DT bindings and driver changes are separate patches.
Quoted 2 lines
2 files changed, 14 insertions(+), 2 deletions(-)
Quoted 11 lines
Documentation/devicetree/bindings/hwmon/ina3221.txt Texas Instruments INA3221 Device Tree Bindings · line 32
Quoted 9 lines
Documentation/devicetree/bindings/hwmon/ina3221.txt +1
-0@@ -29,6 +29,7 @@ Texas Instruments INA3221 Device Tree Bindings Optional properties: - label: Name of the input source - shunt-resistor-micro-ohms: Shunt resistor value in micro-Ohm + - summation-bypass: exclude from channel summation.Convert to DT schema first.
I do have a local patch to convert, I'll attach it here so that Ninad can include it in this series.
Thierry
From d9ae5bbf569516ef0f2d230d934c6a5c0d7ad3a6 Mon Sep 17 00:00:00 2001
From: Thierry Reding <[email protected]>
Date: Thu, 25 Nov 2021 19:33:03 +0100
Subject: [PATCH] dt-bindings: hwmon: ina3221: Convert to json-schema
Convert the TI INA3221 bindings from the free-form text format to json-schema.
--- .../devicetree/bindings/hwmon/ina3221.txt | 54 --------- .../devicetree/bindings/hwmon/ti,ina3221.yaml | 109 ++++++++++++++++++ 2 files changed, 109 insertions(+), 54 deletions(-) delete mode 100644 Documentation/devicetree/bindings/hwmon/ina3221.txt create mode 100644 Documentation/devicetree/bindings/hwmon/ti,ina3221.yaml
Documentation/devicetree/bindings/hwmon/ina3221.txt deleted +0 -54
@@ -1,54 +0,0 @@ -Texas Instruments INA3221 Device Tree Bindings - -1) ina3221 node - Required properties: - - compatible: Must be "ti,ina3221" - - reg: I2C address - - Optional properties: - - ti,single-shot: This chip has two power modes: single-shot (chip takes one - measurement and then shuts itself down) and continuous ( - chip takes continuous measurements). The continuous mode is - more reliable and suitable for hardware monitor type device, - but the single-shot mode is more power-friendly and useful - for battery-powered device which cares power consumptions - while still needs some measurements occasionally. - If this property is present, the single-shot mode will be - used, instead of the default continuous one for monitoring. - - = The node contains optional child nodes for three channels = - = Each child node describes the information of input source = - - - #address-cells: Required only if a child node is present. Must be 1. - - #size-cells: Required only if a child node is present. Must be 0. - -2) child nodes - Required properties: - - reg: Must be 0, 1 or 2, corresponding to IN1, IN2 or IN3 port of INA3221 - - Optional properties: - - label: Name of the input source - - shunt-resistor-micro-ohms: Shunt resistor value in micro-Ohm - -Example: - -ina3221@40 { - compatible = "ti,ina3221"; - reg = <0x40>; - #address-cells = <1>; - #size-cells = <0>; - - input@0 { - reg = <0x0>; - status = "disabled"; - }; - input@1 { - reg = <0x1>; - shunt-resistor-micro-ohms = <5000>; - }; - input@2 { - reg = <0x2>; - label = "VDD_5V"; - shunt-resistor-micro-ohms = <5000>; - }; -};
Documentation/devicetree/bindings/hwmon/ti,ina3221.yaml new file +109 -0
109 lines not on this page · raw message
Signature · 1 line
2.38.1
Quoted 71 lines · Ninad Malwade
Add support to initialize summation channel control via kernel device tree property "summation-bypass". The channel which has this property is excluded from channel summation.
Signed-off-by Ninad Malwade <[email protected]>--- .../devicetree/bindings/hwmon/ina3221.txt | 2 ++ drivers/hwmon/ina3221.c | 14 ++++++++++++-- 2 files changed, 14 insertions(+), 2 deletions(-)Documentation/devicetree/bindings/hwmon/ina3221.txt +2
-0@@ -29,6 +29,7 @@ Texas Instruments INA3221 Device Tree Bindings Optional properties: - label: Name of the input source - shunt-resistor-micro-ohms: Shunt resistor value in micro-Ohm + - summation-bypass: exclude from channel summation. Example:@@ -41,6 +42,7 @@ ina3221@40 { input@0 { reg = <0x0>; status = "disabled"; + summation-bypass; }; input@1 { reg = <0x1>;drivers/hwmon/ina3221.c +7
-1@@ -104,6 +104,7 @@ struct ina3221_input {const char *label;int shunt_resistor;bool disconnected; +bool summation_bypass; };/** @@ -125,6 +126,7 @@ struct ina3221_data {struct mutex lock;u32 reg_config;int summation_shunt_resistor; +u32 summation_channel_control;bool single_shot; };@@ -154,7 +156,8 @@ static inline int ina3221_summation_shunt_resistor(struct ina3221_data *ina)int i, shunt_resistor =0 ;for (i =0 ; i <INA3221_NUM_CHANNELS ; i++) { -if (input[i].disconnected || !input[i].shunt_resistor) +if (input[i].disconnected || !input[i].shunt_resistor || + input[i].summation_bypass)continue ;if (!shunt_resistor) {/* Found the reference shunt resistor value */ @@ -786,6 +789,9 @@ static int ina3221_probe_child_from_dt(struct device *dev,/* Save the connected input label if available */ of_property_read_string (child,"label" , &input->label); +/* summation channel control */ + input->summation_bypass =of_property_read_bool (child,"summation-bypass" ); +/* Overwrite default shunt resistor value optionally */ if (!of_property_read_u32 (child,"shunt-resistor-micro-ohms" , &val)) {if (val <1 || val >INT_MAX ) {
drivers/hwmon/ina3221.c static int ina3221_probe(struct i2c_client *client) · line 884
Quoted 6 lines
drivers/hwmon/ina3221.c +3
-0@@ -873,6 +879,10 @@ static int ina3221_probe(struct i2c_client *client)/* Initialize summation_shunt_resistor for summation channel control */ ina->summation_shunt_resistor =ina3221_summation_shunt_resistor (ina); +for (i =0 ; i <INA3221_NUM_CHANNELS ; i++) { +if (!ina->inputs[i].summation_bypass) + ina->summation_channel_control |= (BIT (14 - i));
No need for the outer parentheses. Otherwise looks good, so with those parentheses dropped, this is: