Skip to contentSkip to conversation

kbuild: add test-{le,ge,lt,gt} macros

PATCH Superseded Masahiro Yamada 3 participants 16 messages Nov 23, 2022 – Dec 8, 2022

Subsystems (4)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/5 kbuild: add test-{le,ge,lt,gt} macros

Because GNU Make is only able to handle strings, it is very hard to perform arighmetic in Makefiles.

When we compare two integers, we invokes shell. One example is in the top Makefile:

  ifeq ($(shell test $(CONFIG_LLD_VERSION) -lt 130000; echo $$?),0)

This is more expensive than using built-in functions since it forks a process.

If we know the two have the same number of digits, we can do better.

This commit adds four macros, test-le, test-ge, test-lt, test-gt.

$(call test-lt, A, B) is evaluated to 'y' if A is less than B, or empty otherwise. This will replace $(call shell test A -lt B).

Again, the limitation is that A and B must have the same number of digits because these macros are based on $(sort ) function.

  $(call test-lt, 1, 9)    -->  y        (Works!)
  $(call test-lt, 10, 9)   -->  y        (Not work...)

To make the latter work, you need to add '0' prefix to align the number of digits:

  $(call test-lt, 10, 09)  -->  empty    (Works!)

Actually, we can live with this limitation in many places. As for the example above, we know $(CONFIG_LLD_VERSION) is 6-digits because the minimal supported version of LLVM is 11.0.0.

So, the shell invocation can be replaced with more efficient code:

  ifeq ($(call test-lt, $(CONFIG_LLD_VERSION), 130000),y)

Of course, this assumption will break when LLVM 100 is released, but it will be far in the future.

---

(no changes since v1)

 Makefile               |  2 +-
 arch/riscv/Makefile    |  2 +-
 arch/x86/Makefile      |  2 +-
 scripts/Kbuild.include | 10 ++++++++++
 4 files changed, 13 insertions(+), 3 deletions(-)
Makefile +1 -1
index 6f846b1f2618..eb80332f7b51 100644
@@ -986,7 +986,7 @@ KBUILD_LDFLAGS += -mllvm -import-instr-limit=5
 # Check for frame size exceeding threshold during prolog/epilog insertion
 # when using lld < 13.0.0.
 ifneq ($(CONFIG_FRAME_WARN),0)
-ifeq ($(shell test $(CONFIG_LLD_VERSION) -lt 130000; echo $$?),0)
+ifeq ($(call test-lt, $(CONFIG_LLD_VERSION), 130000),y)
 KBUILD_LDFLAGS	+= -plugin-opt=-warn-stack-size=$(CONFIG_FRAME_WARN)
 endif
 endif
arch/riscv/Makefile +1 -1
index 0d13b597cb55..faf2c2177094 100644
@@ -37,7 +37,7 @@ else
 endif
 
 ifeq ($(CONFIG_LD_IS_LLD),y)
-ifeq ($(shell test $(CONFIG_LLD_VERSION) -lt 150000; echo $$?),0)
+ifeq ($(call test-lt, $(CONFIG_LLD_VERSION), 150000),y)
 	KBUILD_CFLAGS += -mno-relax
 	KBUILD_AFLAGS += -mno-relax
 ifndef CONFIG_AS_IS_LLVM
arch/x86/Makefile +1 -1
index 415a5d138de4..e72c7a49cd59 100644
@@ -211,7 +211,7 @@ endif
 KBUILD_LDFLAGS += -m elf_$(UTS_MACHINE)
 
 ifdef CONFIG_LTO_CLANG
-ifeq ($(shell test $(CONFIG_LLD_VERSION) -lt 130000; echo $$?),0)
+ifeq ($(call test-lt, $(CONFIG_LLD_VERSION), 130000),y)
 KBUILD_LDFLAGS	+= -plugin-opt=-stack-alignment=$(if $(CONFIG_X86_32),4,8)
 endif
 endif
scripts/Kbuild.include +10 -0
index cbe28744637b..9996f34327cb 100644
@@ -11,6 +11,16 @@ space   := $(empty) $(empty)
 space_escape := _-_SPACE_-_
 pound := \#
 
+###
+# Comparison macros.
+# Usage: $(call test-le, A, B)
+# works like shell's "test A -le B", but A and B must have the same number of
+# digits since it is just ASCII sort.
+test-le = $(if $(filter $1, $(firstword $(sort $1 $2))),y)
+test-ge = $(call test-le, $2, $1)
+test-lt = $(if $(filter-out $2, $(firstword $(sort $1 $2))),y)
+test-gt = $(call test-lt, $2, $1)
+
 ###
 # Name of target with a '.' as filename prefix. foo/bar.o => foo/.bar.o
 dot-target = $(dir $@).$(notdir $@)
Signature · 1 line
2.34.1
#1 lore raw

PATCH v2 2/5 kbuild: implement {gcc,clang}-min-version only with built-in functions

Converting clang-min-version is straightforward because the versions are always 6-digit.

gcc-min-version is somewhat tricky because the minimal GCC version is GCC 5.2; prepend '0' to the version that is less than 10 so that test-ge is always passed with 6-digit versions.

---

Changes in v2:
- Covert gcc-min-version in a different way

 scripts/Makefile.compiler | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
scripts/Makefile.compiler +6 -2
index 20d353dcabfb..cd75f81e88ef 100644
@@ -63,11 +63,15 @@ cc-disable-warning = $(call try-run,\
 
 # gcc-min-version
 # Usage: cflags-$(call gcc-min-version, 70100) += -foo
-gcc-min-version = $(shell [ $(CONFIG_GCC_VERSION)0 -ge $(1)0 ] && echo y)
+
+# Preprend 0 to the version that is less than 10 so test-ge works.
+gcc-min-version = $(call test-ge, \
+                  $(or $(filter 1%, $(CONFIG_GCC_VERSION)), 0$(CONFIG_GCC_VERSION)), \
+                  $(or $(filter 1%, $1), 0$(strip $1)))
 
 # clang-min-version
 # Usage: cflags-$(call clang-min-version, 110000) += -foo
-clang-min-version = $(shell [ $(CONFIG_CLANG_VERSION)0 -ge $(1)0 ] && echo y)
+clang-min-version = $(call test-ge, $(CONFIG_CLANG_VERSION), $1)
 
 # ld-option
 # Usage: KBUILD_LDFLAGS += $(call ld-option, -X, -Y)
Signature · 1 line
2.34.1
Reviewed-by on v2 2/5
#2 lore raw

Re: [PATCH v2 2/5] kbuild: implement {gcc,clang}-min-version only with built-in functions

Quoted 21 lines · Masahiro Yamada

Converting clang-min-version is straightforward because the versions are always 6-digit.

gcc-min-version is somewhat tricky because the minimal GCC version is GCC 5.2; prepend '0' to the version that is less than 10 so that test-ge is always passed with 6-digit versions.

---

Changes in v2:
- Covert gcc-min-version in a different way

 scripts/Makefile.compiler | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
scripts/Makefile.compiler +0 -0
index 20d353dcabfb..cd75f81e88ef 100644

scripts/Makefile.compiler cc-disable-warning = $(call try-run,\ · line 70

Quoted 9 lines
scripts/Makefile.compiler +5 -1
@@ -63,11 +63,15 @@ cc-disable-warning = $(call try-run,\
 
 # gcc-min-version
 # Usage: cflags-$(call gcc-min-version, 70100) += -foo
-gcc-min-version = $(shell [ $(CONFIG_GCC_VERSION)0 -ge $(1)0 ] && echo y)
+
+# Preprend 0 to the version that is less than 10 so test-ge works.
+gcc-min-version = $(call test-ge, \
+                  $(or $(filter 1%, $(CONFIG_GCC_VERSION)), 0$(CONFIG_GCC_VERSION)), \
+                  $(or $(filter 1%, $1), 0$(strip $1)))

Hm, this silently expects a gcc version < 20, which we should expect in
about seven-eight years [1]. I am thinking about the possibility of
silent (but unlikely) breaks when someone in far future uses a gcc 20 against a kernel with this line. Probably we should not care about that today, yet, right?

[1]: https://gcc.gnu.org/develop.html#timeline

Quoted 10 lines
scripts/Makefile.compiler +1 -1
 # clang-min-version
 # Usage: cflags-$(call clang-min-version, 110000) += -foo
-clang-min-version = $(shell [ $(CONFIG_CLANG_VERSION)0 -ge $(1)0 ] && echo y)
+clang-min-version = $(call test-ge, $(CONFIG_CLANG_VERSION), $1)
 
 # ld-option
 # Usage: KBUILD_LDFLAGS += $(call ld-option, -X, -Y)
Signature · 1 line
2.34.1
Signature · 3 lines
epost|xmpp: [email protected]          irc://oftc.net/nsc
↳ gpg: 18ed 52db e34f 860e e9fb  c82b 7d97 0932 55a0 ce7f
     -- frykten for herren er opphav til kunnskap --
#3 lore raw

Re: [PATCH v2 2/5] kbuild: implement {gcc,clang}-min-version only with built-in functions

Quoted 24 lines · Nicolas Schier
Quoted 22 lines · Masahiro Yamada

Converting clang-min-version is straightforward because the versions are always 6-digit.

gcc-min-version is somewhat tricky because the minimal GCC version is GCC 5.2; prepend '0' to the version that is less than 10 so that test-ge is always passed with 6-digit versions.

---

Changes in v2:
- Covert gcc-min-version in a different way

 scripts/Makefile.compiler | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
scripts/Makefile.compiler +0 -0
index 20d353dcabfb..cd75f81e88ef 100644
@@ -63,11 +63,15 @@ cc-disable-warning = $(call try-run,\
 
Quoted 14 lines

scripts/Makefile.compiler cc-disable-warning = $(call try-run,\ · line 70

Quoted 8 lines
scripts/Makefile.compiler +5 -1
 # gcc-min-version
 # Usage: cflags-$(call gcc-min-version, 70100) += -foo
-gcc-min-version = $(shell [ $(CONFIG_GCC_VERSION)0 -ge $(1)0 ] && echo y)
+
+# Preprend 0 to the version that is less than 10 so test-ge works.
+gcc-min-version = $(call test-ge, \
+                  $(or $(filter 1%, $(CONFIG_GCC_VERSION)), 0$(CONFIG_GCC_VERSION)), \
+                  $(or $(filter 1%, $1), 0$(strip $1)))

Hm, this silently expects a gcc version < 20, which we should expect in
about seven-eight years [1]. I am thinking about the possibility of
silent (but unlikely) breaks when someone in far future uses a gcc 20 against a kernel with this line. Probably we should not care about that today, yet, right?

Yeah, I thought of it.

It depends on which of the following two will happen first.

(a) We raise the min gcc version to 10.0.0 and remove this hack
(b) GCC 20 is released

I am guessing (a) will occur first, so we do not need to care about (b).

If (b) happens first, we will need to add "2%".
It means that the window of supported GCC versions will get larger than 10. Presumably, we do not want to support such a wide range of compiler versions.

GCC 5.1 was released in 2015.
So, the current window of GCC versions is 7 years. I hope it will not get even larger...

Signature · 2 lines
Best Regards
Masahiro Yamada
#4 lore raw

PATCH v2 3/5 kbuild: add read-file macro

In reply to Masahiro Yamada

Since GMU Make 4.2, $(file ...) supports the read operater '<', which is useful to read a file without forking any process. No warning is shown even if the input file is missing.

For older Make versions, it falls back to the cat command.

---

(no changes since v1)

 Makefile                  |  2 +-
 scripts/Kbuild.include    | 12 ++++++++++++
 scripts/Makefile.modfinal |  2 +-
 scripts/Makefile.modinst  |  2 +-
 4 files changed, 15 insertions(+), 3 deletions(-)
Makefile +1 -1
index eb80332f7b51..60ce9dcafc72 100644
@@ -369,7 +369,7 @@ else # !mixed-build
 include $(srctree)/scripts/Kbuild.include
 
 # Read KERNELRELEASE from include/config/kernel.release (if it exists)
-KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
+KERNELRELEASE = $(call read-file, include/config/kernel.release)
 KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
 export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
 
scripts/Kbuild.include +12 -0
index 9996f34327cb..722846c23264 100644
@@ -10,6 +10,10 @@ empty   :=
 space   := $(empty) $(empty)
 space_escape := _-_SPACE_-_
 pound := \#
+define newline
+
+
+endef
 
 ###
 # Comparison macros.
@@ -55,6 +59,14 @@ stringify = $(squote)$(quote)$1$(quote)$(squote)
 kbuild-dir = $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
 kbuild-file = $(or $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Makefile)
 
+###
+# Read a file, replacing newlines with spaces
+ifeq ($(call test-ge, $(MAKE_VERSION), 4.2),y)
+read-file = $(subst $(newline),$(space),$(file < $1))
+else
+read-file = $(shell cat $1 2>/dev/null)
+endif
+
 ###
 # Easy method for doing a status message
        kecho := :
scripts/Makefile.modfinal +1 -1
index 25bedd83644b..7252f6cf7837 100644
@@ -13,7 +13,7 @@ include $(srctree)/scripts/Kbuild.include
 include $(srctree)/scripts/Makefile.lib
 
 # find all modules listed in modules.order
-modules := $(sort $(shell cat $(MODORDER)))
+modules := $(sort $(call read-file, $(MODORDER)))
 
 __modfinal: $(modules)
 	@:
scripts/Makefile.modinst +1 -1
index a4c987c23750..509d424dbbd2 100644
@@ -9,7 +9,7 @@ __modinst:
 include include/config/auto.conf
 include $(srctree)/scripts/Kbuild.include
 
-modules := $(sort $(shell cat $(MODORDER)))
+modules := $(sort $(call read-file, $(MODORDER)))
 
 ifeq ($(KBUILD_EXTMOD),)
 dst := $(MODLIB)/kernel
Signature · 1 line
2.34.1
#5 lore raw

Re: [PATCH v2 3/5] kbuild: add read-file macro

Quoted 47 lines · Masahiro Yamada

Since GMU Make 4.2, $(file ...) supports the read operater '<', which is useful to read a file without forking any process. No warning is shown even if the input file is missing.

For older Make versions, it falls back to the cat command.

---

(no changes since v1)

 Makefile                  |  2 +-
 scripts/Kbuild.include    | 12 ++++++++++++
 scripts/Makefile.modfinal |  2 +-
 scripts/Makefile.modinst  |  2 +-
 4 files changed, 15 insertions(+), 3 deletions(-)
Makefile +1 -1
index eb80332f7b51..60ce9dcafc72 100644
@@ -369,7 +369,7 @@ else # !mixed-build
 include $(srctree)/scripts/Kbuild.include
 
 # Read KERNELRELEASE from include/config/kernel.release (if it exists)
-KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
+KERNELRELEASE = $(call read-file, include/config/kernel.release)
 KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
 export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
 
scripts/Kbuild.include +4 -0
index 9996f34327cb..722846c23264 100644
@@ -10,6 +10,10 @@ empty   :=
 space   := $(empty) $(empty)
 space_escape := _-_SPACE_-_
 pound := \#
+define newline
+
+
+endef
 
 ###
 # Comparison macros.
@@ -55,6 +59,14 @@ stringify = $(squote)$(quote)$1$(quote)$(squote)
 kbuild-dir = $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))

scripts/Kbuild.include stringify = $(squote)$(quote)$1$(quote)$(squote) · line 69

Quoted 10 lines
scripts/Kbuild.include +8 -0
 kbuild-file = $(or $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Makefile)
 
+###
+# Read a file, replacing newlines with spaces
+ifeq ($(call test-ge, $(MAKE_VERSION), 4.2),y)
+read-file = $(subst $(newline),$(space),$(file < $1))
+else
+read-file = $(shell cat $1 2>/dev/null)
+endif
+

I like the implementation of read-file, but I am afraid that the MAKE_VERSION comparison breaks all make versions w/ a minor version
number: 3.99.9x, 4.2.x, 4.3.x.

Not beautiful, but this might possibly work:
ifneq ($(filter 3.% 4.0 4.0.% 4.1 4.1.%,$(MAKE_VERSION)),) read-file = ...

Kind regards,
Nicolas

Quoted 31 lines
scripts/Kbuild.include +0 -0
 ###
 # Easy method for doing a status message
        kecho := :
scripts/Makefile.modfinal +1 -1
index 25bedd83644b..7252f6cf7837 100644
@@ -13,7 +13,7 @@ include $(srctree)/scripts/Kbuild.include
 include $(srctree)/scripts/Makefile.lib
 
 # find all modules listed in modules.order
-modules := $(sort $(shell cat $(MODORDER)))
+modules := $(sort $(call read-file, $(MODORDER)))
 
 __modfinal: $(modules)
 	@:
scripts/Makefile.modinst +1 -1
index a4c987c23750..509d424dbbd2 100644
@@ -9,7 +9,7 @@ __modinst:
 include include/config/auto.conf
 include $(srctree)/scripts/Kbuild.include
 
-modules := $(sort $(shell cat $(MODORDER)))
+modules := $(sort $(call read-file, $(MODORDER)))
 
 ifeq ($(KBUILD_EXTMOD),)
 dst := $(MODLIB)/kernel
Signature · 1 line
2.34.1
Signature · 3 lines
epost|xmpp: [email protected]          irc://oftc.net/nsc
↳ gpg: 18ed 52db e34f 860e e9fb  c82b 7d97 0932 55a0 ce7f
     -- frykten for herren er opphav til kunnskap --
#6 lore raw

Re: [PATCH v2 3/5] kbuild: add read-file macro

Quoted 51 lines · Nicolas Schier
Quoted 49 lines · Masahiro Yamada

Since GMU Make 4.2, $(file ...) supports the read operater '<', which is useful to read a file without forking any process. No warning is shown even if the input file is missing.

For older Make versions, it falls back to the cat command.

---

(no changes since v1)

 Makefile                  |  2 +-
 scripts/Kbuild.include    | 12 ++++++++++++
 scripts/Makefile.modfinal |  2 +-
 scripts/Makefile.modinst  |  2 +-
 4 files changed, 15 insertions(+), 3 deletions(-)
Makefile +1 -1
index eb80332f7b51..60ce9dcafc72 100644
@@ -369,7 +369,7 @@ else # !mixed-build
 include $(srctree)/scripts/Kbuild.include
 
 # Read KERNELRELEASE from include/config/kernel.release (if it exists)
-KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
+KERNELRELEASE = $(call read-file, include/config/kernel.release)
 KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
 export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
 
scripts/Kbuild.include +4 -0
index 9996f34327cb..722846c23264 100644
@@ -10,6 +10,10 @@ empty   :=
 space   := $(empty) $(empty)
 space_escape := _-_SPACE_-_
 pound := \#
+define newline
+
+
+endef
 
 ###
 # Comparison macros.
@@ -55,6 +59,14 @@ stringify = $(squote)$(quote)$1$(quote)$(squote)
 kbuild-dir = $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
 kbuild-file = $(or $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Makefile)
 
Quoted 12 lines

scripts/Kbuild.include stringify = $(squote)$(quote)$1$(quote)$(squote) · line 69

Quoted 8 lines
scripts/Kbuild.include +8 -0
+###
+# Read a file, replacing newlines with spaces
+ifeq ($(call test-ge, $(MAKE_VERSION), 4.2),y)
+read-file = $(subst $(newline),$(space),$(file < $1))
+else
+read-file = $(shell cat $1 2>/dev/null)
+endif
+

I like the implementation of read-file, but I am afraid that the MAKE_VERSION comparison breaks all make versions w/ a minor version
number: 3.99.9x, 4.2.x, 4.3.x.

I think these should work correctly
unless I missed something terribly.

In the ASCII-sorting, they are sorted like this:

3.99.9x 4.2 4.2.x 4.3.x

The bad scenarios I came up with is GNU Make 4.10 and GNU Make 10.0 because $(sort ) will sort

10 4.10 4.2

GNU Make 4.3 was released in Jan 2020
GNU Make 4.4 was released in Oct 2022

If the current release pace continues,
we will have about 10 years until GNU Make hits 4.10

Until then, we can remove this ifeq.

Signature · 2 lines
Best Regards
Masahiro Yamada
Reviewed-by
#7 lore raw

Re: [PATCH v2 3/5] kbuild: add read-file macro

Quoted 92 lines · Masahiro Yamada
Quoted 51 lines · Nicolas Schier
Quoted 49 lines · Masahiro Yamada

Since GMU Make 4.2, $(file ...) supports the read operater '<', which is useful to read a file without forking any process. No warning is shown even if the input file is missing.

For older Make versions, it falls back to the cat command.

---

(no changes since v1)

 Makefile                  |  2 +-
 scripts/Kbuild.include    | 12 ++++++++++++
 scripts/Makefile.modfinal |  2 +-
 scripts/Makefile.modinst  |  2 +-
 4 files changed, 15 insertions(+), 3 deletions(-)
Makefile +1 -1
index eb80332f7b51..60ce9dcafc72 100644
@@ -369,7 +369,7 @@ else # !mixed-build
 include $(srctree)/scripts/Kbuild.include
 
 # Read KERNELRELEASE from include/config/kernel.release (if it exists)
-KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
+KERNELRELEASE = $(call read-file, include/config/kernel.release)
 KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
 export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
 
scripts/Kbuild.include +4 -0
index 9996f34327cb..722846c23264 100644
@@ -10,6 +10,10 @@ empty   :=
 space   := $(empty) $(empty)
 space_escape := _-_SPACE_-_
 pound := \#
+define newline
+
+
+endef
 
 ###
 # Comparison macros.
@@ -55,6 +59,14 @@ stringify = $(squote)$(quote)$1$(quote)$(squote)
 kbuild-dir = $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
 kbuild-file = $(or $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Makefile)
 
Quoted 12 lines

scripts/Kbuild.include stringify = $(squote)$(quote)$1$(quote)$(squote) · line 69

Quoted 8 lines
scripts/Kbuild.include +8 -0
+###
+# Read a file, replacing newlines with spaces
+ifeq ($(call test-ge, $(MAKE_VERSION), 4.2),y)
+read-file = $(subst $(newline),$(space),$(file < $1))
+else
+read-file = $(shell cat $1 2>/dev/null)
+endif
+

I like the implementation of read-file, but I am afraid that the MAKE_VERSION comparison breaks all make versions w/ a minor version
number: 3.99.9x, 4.2.x, 4.3.x.

I think these should work correctly
unless I missed something terribly.

In the ASCII-sorting, they are sorted like this:

3.99.9x 4.2 4.2.x 4.3.x

The bad scenarios I came up with is GNU Make 4.10 and GNU Make 10.0 because $(sort ) will sort

10 4.10 4.2

GNU Make 4.3 was released in Jan 2020
GNU Make 4.4 was released in Oct 2022

Quoted 5 lines

If the current release pace continues,
we will have about 10 years until GNU Make hits 4.10

Until then, we can remove this ifeq.

yes, you're right. I should have checked my assumption before bothering you with it.

Quoted 5 lines
Signature · 3 lines
-- 
Best Regards
Masahiro Yamada
Signature · 3 lines
epost|xmpp: [email protected]          irc://oftc.net/nsc
↳ gpg: 18ed 52db e34f 860e e9fb  c82b 7d97 0932 55a0 ce7f
     -- frykten for herren er opphav til kunnskap --
#8 lore raw

PATCH v2 4/5 kconfig: refactor Makefile to reduce process forks

In reply to Masahiro Yamada

Refactor Makefile and use read-file macro. For Make >= 4.2, it can read out a file by using the built-in function.

---

(no changes since v1)

 scripts/kconfig/.gitignore   |  4 +++-
 scripts/kconfig/Makefile     | 43 +++++++++++++++++++-----------------
 scripts/kconfig/gconf-cfg.sh |  7 ++++--
 scripts/kconfig/mconf-cfg.sh | 25 ++++++++++++---------
 scripts/kconfig/nconf-cfg.sh | 23 ++++++++++---------
 scripts/kconfig/qconf-cfg.sh | 10 ++++++---
 scripts/remove-stale-files   |  2 ++
 7 files changed, 67 insertions(+), 47 deletions(-)
scripts/kconfig/.gitignore +3 -1
index 500e7424b3ef..c8a3f9cd52f0 100644
@@ -1,5 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 /conf
 /[gmnq]conf
-/[gmnq]conf-cfg
+/[gmnq]conf-cflags
+/[gmnq]conf-libs
+/qconf-bin
 /qconf-moc.cc
scripts/kconfig/Makefile +23 -20

76 lines not on this page · raw message

scripts/kconfig/gconf-cfg.sh +5 -2
index cbd90c28c05f..040d8f338820 100755
@@ -1,6 +1,9 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 
+cflags=$1
+libs=$2
+
 PKG="gtk+-2.0 gmodule-2.0 libglade-2.0"
 
 if [ -z "$(command -v ${HOSTPKG_CONFIG})" ]; then
@@ -26,5 +29,5 @@ if ! ${HOSTPKG_CONFIG} --atleast-version=2.0.0 gtk+-2.0; then
 	exit 1
 fi
 
-echo cflags=\"$(${HOSTPKG_CONFIG} --cflags $PKG)\"
-echo libs=\"$(${HOSTPKG_CONFIG} --libs $PKG)\"
+${HOSTPKG_CONFIG} --cflags ${PKG} > ${cflags}
+${HOSTPKG_CONFIG} --libs ${PKG} > ${libs}
scripts/kconfig/mconf-cfg.sh +14 -11
index 025b565e0b7c..1e61f50a5905 100755
@@ -1,19 +1,22 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 
+cflags=$1
+libs=$2
+
 PKG="ncursesw"
 PKG2="ncurses"
 
 if [ -n "$(command -v ${HOSTPKG_CONFIG})" ]; then
 	if ${HOSTPKG_CONFIG} --exists $PKG; then
-		echo cflags=\"$(${HOSTPKG_CONFIG} --cflags $PKG)\"
-		echo libs=\"$(${HOSTPKG_CONFIG} --libs $PKG)\"
+		${HOSTPKG_CONFIG} --cflags ${PKG} > ${cflags}
+		${HOSTPKG_CONFIG} --libs ${PKG} > ${libs}
 		exit 0
 	fi
 
-	if ${HOSTPKG_CONFIG} --exists $PKG2; then
-		echo cflags=\"$(${HOSTPKG_CONFIG} --cflags $PKG2)\"
-		echo libs=\"$(${HOSTPKG_CONFIG} --libs $PKG2)\"
+	if ${HOSTPKG_CONFIG} --exists ${PKG2}; then
+		${HOSTPKG_CONFIG} --cflags ${PKG2} > ${cflags}
+		${HOSTPKG_CONFIG} --libs ${PKG2} > ${libs}
 		exit 0
 	fi
 fi
@@ -22,22 +25,22 @@ fi
 # (Even if it is installed, some distributions such as openSUSE cannot
 # find ncurses by pkg-config.)
 if [ -f /usr/include/ncursesw/ncurses.h ]; then
-	echo cflags=\"-D_GNU_SOURCE -I/usr/include/ncursesw\"
-	echo libs=\"-lncursesw\"
+	echo -D_GNU_SOURCE -I/usr/include/ncursesw > ${cflags}
+	echo -lncursesw > ${libs}
 	exit 0
 fi
 
 if [ -f /usr/include/ncurses/ncurses.h ]; then
-	echo cflags=\"-D_GNU_SOURCE -I/usr/include/ncurses\"
-	echo libs=\"-lncurses\"
+	echo -D_GNU_SOURCE -I/usr/include/ncurses > ${cflags}
+	echo -lncurses > ${libs}
 	exit 0
 fi
 
 # As a final fallback before giving up, check if $HOSTCC knows of a default
 # ncurses installation (e.g. from a vendor-specific sysroot).
 if echo '#include <ncurses.h>' | ${HOSTCC} -E - >/dev/null 2>&1; then
-	echo cflags=\"-D_GNU_SOURCE\"
-	echo libs=\"-lncurses\"
+	echo -D_GNU_SOURCE > ${cflags}
+	echo -lncurses > ${libs}
 	exit 0
 fi
 
scripts/kconfig/nconf-cfg.sh +13 -10
index 3a10bac2adb3..f871a2160e36 100755
@@ -1,19 +1,22 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 
+cflags=$1
+libs=$2
+
 PKG="ncursesw menuw panelw"
 PKG2="ncurses menu panel"
 
 if [ -n "$(command -v ${HOSTPKG_CONFIG})" ]; then
 	if ${HOSTPKG_CONFIG} --exists $PKG; then
-		echo cflags=\"$(${HOSTPKG_CONFIG} --cflags $PKG)\"
-		echo libs=\"$(${HOSTPKG_CONFIG} --libs $PKG)\"
+		${HOSTPKG_CONFIG} --cflags ${PKG} > ${cflags}
+		${HOSTPKG_CONFIG} --libs ${PKG} > ${libs}
 		exit 0
 	fi
 
 	if ${HOSTPKG_CONFIG} --exists $PKG2; then
-		echo cflags=\"$(${HOSTPKG_CONFIG} --cflags $PKG2)\"
-		echo libs=\"$(${HOSTPKG_CONFIG} --libs $PKG2)\"
+		${HOSTPKG_CONFIG} --cflags ${PKG2} > ${cflags}
+		${HOSTPKG_CONFIG} --libs ${PKG2} > ${libs}
 		exit 0
 	fi
 fi
@@ -22,20 +25,20 @@ fi
 # (Even if it is installed, some distributions such as openSUSE cannot
 # find ncurses by pkg-config.)
 if [ -f /usr/include/ncursesw/ncurses.h ]; then
-	echo cflags=\"-D_GNU_SOURCE -I/usr/include/ncursesw\"
-	echo libs=\"-lncursesw -lmenuw -lpanelw\"
+	echo -D_GNU_SOURCE -I/usr/include/ncursesw > ${cflags}
+	echo -lncursesw -lmenuw -lpanelw > ${libs}
 	exit 0
 fi
 
 if [ -f /usr/include/ncurses/ncurses.h ]; then
-	echo cflags=\"-D_GNU_SOURCE -I/usr/include/ncurses\"
-	echo libs=\"-lncurses -lmenu -lpanel\"
+	echo -D_GNU_SOURCE -I/usr/include/ncurses > ${cflags}
+	echo -lncurses -lmenu -lpanel > ${libs}
 	exit 0
 fi
 
 if [ -f /usr/include/ncurses.h ]; then
-	echo cflags=\"-D_GNU_SOURCE\"
-	echo libs=\"-lncurses -lmenu -lpanel\"
+	echo -D_GNU_SOURCE > ${cflags}
+	echo -lncurses -lmenu -lpanel > ${libs}
 	exit 0
 fi
 
scripts/kconfig/qconf-cfg.sh +7 -3
index ad652cb53947..117f36e568fc 100755
@@ -1,6 +1,10 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 
+cflags=$1
+libs=$2
+bin=$3
+
 PKG="Qt5Core Qt5Gui Qt5Widgets"
 
 if [ -z "$(command -v ${HOSTPKG_CONFIG})" ]; then
@@ -11,9 +15,9 @@ if [ -z "$(command -v ${HOSTPKG_CONFIG})" ]; then
 fi
 
 if ${HOSTPKG_CONFIG} --exists $PKG; then
-	echo cflags=\"-std=c++11 -fPIC $(${HOSTPKG_CONFIG} --cflags $PKG)\"
-	echo libs=\"$(${HOSTPKG_CONFIG} --libs $PKG)\"
-	echo moc=\"$(${HOSTPKG_CONFIG} --variable=host_bins Qt5Core)/moc\"
+	${HOSTPKG_CONFIG} --cflags ${PKG} > ${cflags}
+	${HOSTPKG_CONFIG} --libs ${PKG} > ${libs}
+	${HOSTPKG_CONFIG} --variable=host_bins Qt5Core > ${bin}
 	exit 0
 fi
 
scripts/remove-stale-files +2 -0
index ccadfa3afb2b..64b14aa5aebf 100755
@@ -47,3 +47,5 @@ rm -f arch/riscv/purgatory/kexec-purgatory.c
 rm -f scripts/extract-cert
 
 rm -f arch/x86/purgatory/kexec-purgatory.c
+
+rm -f scripts/kconfig/[gmnq]conf-cfg
Signature · 1 line
2.34.1
Reviewed-by on v2 4/5
#9 lore raw

Re: [PATCH v2 4/5] kconfig: refactor Makefile to reduce process forks

Quoted 6 lines · Masahiro Yamada

Refactor Makefile and use read-file macro. For Make >= 4.2, it can read
out a file by using the built-in function.

---

Quoted 289 lines

(no changes since v1)

 scripts/kconfig/.gitignore   |  4 +++-
 scripts/kconfig/Makefile     | 43 +++++++++++++++++++-----------------
 scripts/kconfig/gconf-cfg.sh |  7 ++++--
 scripts/kconfig/mconf-cfg.sh | 25 ++++++++++++---------
 scripts/kconfig/nconf-cfg.sh | 23 ++++++++++---------
 scripts/kconfig/qconf-cfg.sh | 10 ++++++---
 scripts/remove-stale-files   |  2 ++
 7 files changed, 67 insertions(+), 47 deletions(-)
scripts/kconfig/.gitignore +3 -1
index 500e7424b3ef..c8a3f9cd52f0 100644
@@ -1,5 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 /conf
 /[gmnq]conf
-/[gmnq]conf-cfg
+/[gmnq]conf-cflags
+/[gmnq]conf-libs
+/qconf-bin
 /qconf-moc.cc
scripts/kconfig/Makefile +23 -20
index b8ef0fb4bbef..da7da9775a4b 100644
@@ -159,11 +159,12 @@ conf-objs	:= conf.o $(common-objs)
 hostprogs	+= nconf
 nconf-objs	:= nconf.o nconf.gui.o $(common-objs)
 
-HOSTLDLIBS_nconf	= $(shell . $(obj)/nconf-cfg && echo $$libs)
-HOSTCFLAGS_nconf.o	= $(shell . $(obj)/nconf-cfg && echo $$cflags)
-HOSTCFLAGS_nconf.gui.o	= $(shell . $(obj)/nconf-cfg && echo $$cflags)
+HOSTLDLIBS_nconf       = $(call read-file, $(obj)/nconf-libs)
+HOSTCFLAGS_nconf.o     = $(call read-file, $(obj)/nconf-cflags)
+HOSTCFLAGS_nconf.gui.o = $(call read-file, $(obj)/nconf-cflags)
 
-$(obj)/nconf.o $(obj)/nconf.gui.o: $(obj)/nconf-cfg
+$(obj)/nconf: | $(obj)/nconf-libs
+$(obj)/nconf.o $(obj)/nconf.gui.o: | $(obj)/nconf-cflags
 
 # mconf: Used for the menuconfig target based on lxdialog
 hostprogs	+= mconf
@@ -171,27 +172,28 @@ lxdialog	:= $(addprefix lxdialog/, \
 		     checklist.o inputbox.o menubox.o textbox.o util.o yesno.o)
 mconf-objs	:= mconf.o $(lxdialog) $(common-objs)
 
-HOSTLDLIBS_mconf = $(shell . $(obj)/mconf-cfg && echo $$libs)
+HOSTLDLIBS_mconf = $(call read-file, $(obj)/mconf-libs)
 $(foreach f, mconf.o $(lxdialog), \
-  $(eval HOSTCFLAGS_$f = $$(shell . $(obj)/mconf-cfg && echo $$$$cflags)))
+  $(eval HOSTCFLAGS_$f = $$(call read-file, $(obj)/mconf-cflags)))
 
-$(addprefix $(obj)/, mconf.o $(lxdialog)): $(obj)/mconf-cfg
+$(obj)/mconf: | $(obj)/mconf-libs
+$(addprefix $(obj)/, mconf.o $(lxdialog)): | $(obj)/mconf-cflags
 
 # qconf: Used for the xconfig target based on Qt
 hostprogs	+= qconf
 qconf-cxxobjs	:= qconf.o qconf-moc.o
 qconf-objs	:= images.o $(common-objs)
 
-HOSTLDLIBS_qconf	= $(shell . $(obj)/qconf-cfg && echo $$libs)
-HOSTCXXFLAGS_qconf.o	= $(shell . $(obj)/qconf-cfg && echo $$cflags)
-HOSTCXXFLAGS_qconf-moc.o = $(shell . $(obj)/qconf-cfg && echo $$cflags)
-
-$(obj)/qconf.o: $(obj)/qconf-cfg
+HOSTLDLIBS_qconf         = $(call read-file, $(obj)/qconf-libs)
+HOSTCXXFLAGS_qconf.o     = -std=c++11 -fPIC $(call read-file, $(obj)/qconf-cflags)
+HOSTCXXFLAGS_qconf-moc.o = -std=c++11 -fPIC $(call read-file, $(obj)/qconf-cflags)
+$(obj)/qconf: | $(obj)/qconf-libs
+$(obj)/qconf.o $(obj)/qconf-moc.o: | $(obj)/qconf-cflags
 
 quiet_cmd_moc = MOC     $@
-      cmd_moc = $(shell . $(obj)/qconf-cfg && echo $$moc) $< -o $@
+      cmd_moc = $(call read-file, $(obj)/qconf-bin)/moc $< -o $@
 
-$(obj)/qconf-moc.cc: $(src)/qconf.h $(obj)/qconf-cfg FORCE
+$(obj)/qconf-moc.cc: $(src)/qconf.h FORCE | $(obj)/qconf-bin
 	$(call if_changed,moc)
 
 targets += qconf-moc.cc
@@ -200,15 +202,16 @@ targets += qconf-moc.cc
 hostprogs	+= gconf
 gconf-objs	:= gconf.o images.o $(common-objs)
 
-HOSTLDLIBS_gconf    = $(shell . $(obj)/gconf-cfg && echo $$libs)
-HOSTCFLAGS_gconf.o  = $(shell . $(obj)/gconf-cfg && echo $$cflags)
+HOSTLDLIBS_gconf   = $(call read-file, $(obj)/gconf-libs)
+HOSTCFLAGS_gconf.o = $(call read-file, $(obj)/gconf-cflags)
 
-$(obj)/gconf.o: $(obj)/gconf-cfg
+$(obj)/gconf: | $(obj)/gconf-libs
+$(obj)/gconf.o: | $(obj)/gconf-cflags
 
 # check if necessary packages are available, and configure build flags
-filechk_conf_cfg = $(CONFIG_SHELL) $<
+cmd_conf_cfg = $< $(addprefix $(obj)/$*conf-, cflags libs bin)
 
-$(obj)/%conf-cfg: $(src)/%conf-cfg.sh FORCE
-	$(call filechk,conf_cfg)
+$(obj)/%conf-cflags $(obj)/%conf-libs $(obj)/%conf-bin: $(src)/%conf-cfg.sh
+	$(call cmd,conf_cfg)
 
 clean-files += *conf-cfg
scripts/kconfig/gconf-cfg.sh +5 -2
index cbd90c28c05f..040d8f338820 100755
@@ -1,6 +1,9 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 
+cflags=$1
+libs=$2
+
 PKG="gtk+-2.0 gmodule-2.0 libglade-2.0"
 
 if [ -z "$(command -v ${HOSTPKG_CONFIG})" ]; then
@@ -26,5 +29,5 @@ if ! ${HOSTPKG_CONFIG} --atleast-version=2.0.0 gtk+-2.0; then
 	exit 1
 fi
 
-echo cflags=\"$(${HOSTPKG_CONFIG} --cflags $PKG)\"
-echo libs=\"$(${HOSTPKG_CONFIG} --libs $PKG)\"
+${HOSTPKG_CONFIG} --cflags ${PKG} > ${cflags}
+${HOSTPKG_CONFIG} --libs ${PKG} > ${libs}
scripts/kconfig/mconf-cfg.sh +14 -11
index 025b565e0b7c..1e61f50a5905 100755
@@ -1,19 +1,22 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 
+cflags=$1
+libs=$2
+
 PKG="ncursesw"
 PKG2="ncurses"
 
 if [ -n "$(command -v ${HOSTPKG_CONFIG})" ]; then
 	if ${HOSTPKG_CONFIG} --exists $PKG; then
-		echo cflags=\"$(${HOSTPKG_CONFIG} --cflags $PKG)\"
-		echo libs=\"$(${HOSTPKG_CONFIG} --libs $PKG)\"
+		${HOSTPKG_CONFIG} --cflags ${PKG} > ${cflags}
+		${HOSTPKG_CONFIG} --libs ${PKG} > ${libs}
 		exit 0
 	fi
 
-	if ${HOSTPKG_CONFIG} --exists $PKG2; then
-		echo cflags=\"$(${HOSTPKG_CONFIG} --cflags $PKG2)\"
-		echo libs=\"$(${HOSTPKG_CONFIG} --libs $PKG2)\"
+	if ${HOSTPKG_CONFIG} --exists ${PKG2}; then
+		${HOSTPKG_CONFIG} --cflags ${PKG2} > ${cflags}
+		${HOSTPKG_CONFIG} --libs ${PKG2} > ${libs}
 		exit 0
 	fi
 fi
@@ -22,22 +25,22 @@ fi
 # (Even if it is installed, some distributions such as openSUSE cannot
 # find ncurses by pkg-config.)
 if [ -f /usr/include/ncursesw/ncurses.h ]; then
-	echo cflags=\"-D_GNU_SOURCE -I/usr/include/ncursesw\"
-	echo libs=\"-lncursesw\"
+	echo -D_GNU_SOURCE -I/usr/include/ncursesw > ${cflags}
+	echo -lncursesw > ${libs}
 	exit 0
 fi
 
 if [ -f /usr/include/ncurses/ncurses.h ]; then
-	echo cflags=\"-D_GNU_SOURCE -I/usr/include/ncurses\"
-	echo libs=\"-lncurses\"
+	echo -D_GNU_SOURCE -I/usr/include/ncurses > ${cflags}
+	echo -lncurses > ${libs}
 	exit 0
 fi
 
 # As a final fallback before giving up, check if $HOSTCC knows of a default
 # ncurses installation (e.g. from a vendor-specific sysroot).
 if echo '#include <ncurses.h>' | ${HOSTCC} -E - >/dev/null 2>&1; then
-	echo cflags=\"-D_GNU_SOURCE\"
-	echo libs=\"-lncurses\"
+	echo -D_GNU_SOURCE > ${cflags}
+	echo -lncurses > ${libs}
 	exit 0
 fi
 
scripts/kconfig/nconf-cfg.sh +13 -10
index 3a10bac2adb3..f871a2160e36 100755
@@ -1,19 +1,22 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 
+cflags=$1
+libs=$2
+
 PKG="ncursesw menuw panelw"
 PKG2="ncurses menu panel"
 
 if [ -n "$(command -v ${HOSTPKG_CONFIG})" ]; then
 	if ${HOSTPKG_CONFIG} --exists $PKG; then
-		echo cflags=\"$(${HOSTPKG_CONFIG} --cflags $PKG)\"
-		echo libs=\"$(${HOSTPKG_CONFIG} --libs $PKG)\"
+		${HOSTPKG_CONFIG} --cflags ${PKG} > ${cflags}
+		${HOSTPKG_CONFIG} --libs ${PKG} > ${libs}
 		exit 0
 	fi
 
 	if ${HOSTPKG_CONFIG} --exists $PKG2; then
-		echo cflags=\"$(${HOSTPKG_CONFIG} --cflags $PKG2)\"
-		echo libs=\"$(${HOSTPKG_CONFIG} --libs $PKG2)\"
+		${HOSTPKG_CONFIG} --cflags ${PKG2} > ${cflags}
+		${HOSTPKG_CONFIG} --libs ${PKG2} > ${libs}
 		exit 0
 	fi
 fi
@@ -22,20 +25,20 @@ fi
 # (Even if it is installed, some distributions such as openSUSE cannot
 # find ncurses by pkg-config.)
 if [ -f /usr/include/ncursesw/ncurses.h ]; then
-	echo cflags=\"-D_GNU_SOURCE -I/usr/include/ncursesw\"
-	echo libs=\"-lncursesw -lmenuw -lpanelw\"
+	echo -D_GNU_SOURCE -I/usr/include/ncursesw > ${cflags}
+	echo -lncursesw -lmenuw -lpanelw > ${libs}
 	exit 0
 fi
 
 if [ -f /usr/include/ncurses/ncurses.h ]; then
-	echo cflags=\"-D_GNU_SOURCE -I/usr/include/ncurses\"
-	echo libs=\"-lncurses -lmenu -lpanel\"
+	echo -D_GNU_SOURCE -I/usr/include/ncurses > ${cflags}
+	echo -lncurses -lmenu -lpanel > ${libs}
 	exit 0
 fi
 
 if [ -f /usr/include/ncurses.h ]; then
-	echo cflags=\"-D_GNU_SOURCE\"
-	echo libs=\"-lncurses -lmenu -lpanel\"
+	echo -D_GNU_SOURCE > ${cflags}
+	echo -lncurses -lmenu -lpanel > ${libs}
 	exit 0
 fi
 
scripts/kconfig/qconf-cfg.sh +7 -3
index ad652cb53947..117f36e568fc 100755
@@ -1,6 +1,10 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 
+cflags=$1
+libs=$2
+bin=$3
+
 PKG="Qt5Core Qt5Gui Qt5Widgets"
 
 if [ -z "$(command -v ${HOSTPKG_CONFIG})" ]; then
@@ -11,9 +15,9 @@ if [ -z "$(command -v ${HOSTPKG_CONFIG})" ]; then
 fi
 
 if ${HOSTPKG_CONFIG} --exists $PKG; then
-	echo cflags=\"-std=c++11 -fPIC $(${HOSTPKG_CONFIG} --cflags $PKG)\"
-	echo libs=\"$(${HOSTPKG_CONFIG} --libs $PKG)\"
-	echo moc=\"$(${HOSTPKG_CONFIG} --variable=host_bins Qt5Core)/moc\"
+	${HOSTPKG_CONFIG} --cflags ${PKG} > ${cflags}
+	${HOSTPKG_CONFIG} --libs ${PKG} > ${libs}
+	${HOSTPKG_CONFIG} --variable=host_bins Qt5Core > ${bin}
 	exit 0
 fi
 
scripts/remove-stale-files +2 -0
index ccadfa3afb2b..64b14aa5aebf 100755
@@ -47,3 +47,5 @@ rm -f arch/riscv/purgatory/kexec-purgatory.c
 rm -f scripts/extract-cert
 
 rm -f arch/x86/purgatory/kexec-purgatory.c
+
+rm -f scripts/kconfig/[gmnq]conf-cfg
Signature · 1 line
2.34.1
Signature · 3 lines
epost|xmpp: [email protected]          irc://oftc.net/nsc
↳ gpg: 18ed 52db e34f 860e e9fb  c82b 7d97 0932 55a0 ce7f
     -- frykten for herren er opphav til kunnskap --
#10 lore raw

PATCH v2 5/5 kbuild: check Make version

In reply to Masahiro Yamada

This is implemented based on test-le. It will work until GNU Make 10 is released.

---

(no changes since v1)

 Makefile | 3 +++
 1 file changed, 3 insertions(+)
Makefile +3 -0
index 60ce9dcafc72..797fafbc1b45 100644
@@ -368,6 +368,9 @@ else # !mixed-build
 
 include $(srctree)/scripts/Kbuild.include
 
+# Check for the minimal Make version
+$(if $(call test-lt, $(MAKE_VERSION), 3.82), $(error Make $(MAKE_VERSION) is too old))
+
 # Read KERNELRELEASE from include/config/kernel.release (if it exists)
 KERNELRELEASE = $(call read-file, include/config/kernel.release)
 KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
Signature · 1 line
2.34.1
#11 lore raw

Re: [PATCH v2 5/5] kbuild: check Make version

Quoted 2 lines · Masahiro Yamada

This is implemented based on test-le. It will work until GNU Make 10 is released.

... and as long as nobody uses make versions w/ minor version numbers, cp. patch 3/5.

Kind regards,
Nicolas

Quoted 25 lines

---

(no changes since v1)

 Makefile | 3 +++
 1 file changed, 3 insertions(+)
Makefile +3 -0
index 60ce9dcafc72..797fafbc1b45 100644
@@ -368,6 +368,9 @@ else # !mixed-build
 
 include $(srctree)/scripts/Kbuild.include
 
+# Check for the minimal Make version
+$(if $(call test-lt, $(MAKE_VERSION), 3.82), $(error Make $(MAKE_VERSION) is too old))
+
 # Read KERNELRELEASE from include/config/kernel.release (if it exists)
 KERNELRELEASE = $(call read-file, include/config/kernel.release)
 KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
Signature · 1 line
2.34.1
Signature · 3 lines
epost|xmpp: [email protected]          irc://oftc.net/nsc
↳ gpg: 18ed 52db e34f 860e e9fb  c82b 7d97 0932 55a0 ce7f
     -- frykten for herren er opphav til kunnskap --
Reviewed-by
#12 lore raw

Re: [PATCH v2 5/5] kbuild: check Make version

Quoted 7 lines · Nicolas Schier
Quoted 2 lines · Masahiro Yamada

This is implemented based on test-le. It will work until GNU Make 10 is released.

... and as long as nobody uses make versions w/ minor version numbers, cp. patch 3/5.

I had a wrong understanding of the ASCII sort and forgot to re-check my own assumptions.

Thanks for that whole patch set!

Quoted 31 lines
Quoted 26 lines

---

(no changes since v1)

 Makefile | 3 +++
 1 file changed, 3 insertions(+)
Makefile +3 -0
index 60ce9dcafc72..797fafbc1b45 100644
@@ -368,6 +368,9 @@ else # !mixed-build
 
 include $(srctree)/scripts/Kbuild.include
 
+# Check for the minimal Make version
+$(if $(call test-lt, $(MAKE_VERSION), 3.82), $(error Make $(MAKE_VERSION) is too old))
+
 # Read KERNELRELEASE from include/config/kernel.release (if it exists)
 KERNELRELEASE = $(call read-file, include/config/kernel.release)
 KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
Signature · 1 line
2.34.1
Signature · 3 lines
epost|xmpp: [email protected]          irc://oftc.net/nsc
↳ gpg: 18ed 52db e34f 860e e9fb  c82b 7d97 0932 55a0 ce7f
     -- frykten for herren er opphav til kunnskap --
Signature · 3 lines
epost|xmpp: [email protected]          irc://oftc.net/nsc
↳ gpg: 18ed 52db e34f 860e e9fb  c82b 7d97 0932 55a0 ce7f
     -- frykten for herren er opphav til kunnskap --
Reviewed-by on v2 1/5
#13 lore raw
In reply to Masahiro Yamada
Quoted 98 lines · Masahiro Yamada

Because GNU Make is only able to handle strings, it is very hard to perform arighmetic in Makefiles.

When we compare two integers, we invokes shell. One example is in the top Makefile:

  ifeq ($(shell test $(CONFIG_LLD_VERSION) -lt 130000; echo $$?),0)

This is more expensive than using built-in functions since it forks a process.

If we know the two have the same number of digits, we can do better.

This commit adds four macros, test-le, test-ge, test-lt, test-gt.

$(call test-lt, A, B) is evaluated to 'y' if A is less than B, or empty otherwise. This will replace $(call shell test A -lt B).

Again, the limitation is that A and B must have the same number of digits because these macros are based on $(sort ) function.

  $(call test-lt, 1, 9)    -->  y        (Works!)
  $(call test-lt, 10, 9)   -->  y        (Not work...)

To make the latter work, you need to add '0' prefix to align the number of digits:

  $(call test-lt, 10, 09)  -->  empty    (Works!)

Actually, we can live with this limitation in many places. As for the example above, we know $(CONFIG_LLD_VERSION) is 6-digits because the minimal supported version of LLVM is 11.0.0.

So, the shell invocation can be replaced with more efficient code:

  ifeq ($(call test-lt, $(CONFIG_LLD_VERSION), 130000),y)

Of course, this assumption will break when LLVM 100 is released, but it will be far in the future.

---

(no changes since v1)

 Makefile               |  2 +-
 arch/riscv/Makefile    |  2 +-
 arch/x86/Makefile      |  2 +-
 scripts/Kbuild.include | 10 ++++++++++
 4 files changed, 13 insertions(+), 3 deletions(-)
Makefile +1 -1
index 6f846b1f2618..eb80332f7b51 100644
@@ -986,7 +986,7 @@ KBUILD_LDFLAGS += -mllvm -import-instr-limit=5
 # Check for frame size exceeding threshold during prolog/epilog insertion
 # when using lld < 13.0.0.
 ifneq ($(CONFIG_FRAME_WARN),0)
-ifeq ($(shell test $(CONFIG_LLD_VERSION) -lt 130000; echo $$?),0)
+ifeq ($(call test-lt, $(CONFIG_LLD_VERSION), 130000),y)
 KBUILD_LDFLAGS	+= -plugin-opt=-warn-stack-size=$(CONFIG_FRAME_WARN)
 endif
 endif
arch/riscv/Makefile +1 -1
index 0d13b597cb55..faf2c2177094 100644
@@ -37,7 +37,7 @@ else
 endif
 
 ifeq ($(CONFIG_LD_IS_LLD),y)
-ifeq ($(shell test $(CONFIG_LLD_VERSION) -lt 150000; echo $$?),0)
+ifeq ($(call test-lt, $(CONFIG_LLD_VERSION), 150000),y)
 	KBUILD_CFLAGS += -mno-relax
 	KBUILD_AFLAGS += -mno-relax
 ifndef CONFIG_AS_IS_LLVM
arch/x86/Makefile +1 -1
index 415a5d138de4..e72c7a49cd59 100644
@@ -211,7 +211,7 @@ endif
 KBUILD_LDFLAGS += -m elf_$(UTS_MACHINE)
 
 ifdef CONFIG_LTO_CLANG
-ifeq ($(shell test $(CONFIG_LLD_VERSION) -lt 130000; echo $$?),0)
+ifeq ($(call test-lt, $(CONFIG_LLD_VERSION), 130000),y)
 KBUILD_LDFLAGS	+= -plugin-opt=-stack-alignment=$(if $(CONFIG_X86_32),4,8)
 endif
 endif
scripts/Kbuild.include +0 -0
index cbe28744637b..9996f34327cb 100644
@@ -11,6 +11,16 @@ space   := $(empty) $(empty)
 space_escape := _-_SPACE_-_
 pound := \#
 

scripts/Kbuild.include space := $(empty) $(empty) · line 23

Quoted 10 lines
scripts/Kbuild.include +10 -0
+###
+# Comparison macros.
+# Usage: $(call test-le, A, B)
+# works like shell's "test A -le B", but A and B must have the same number of
+# digits since it is just ASCII sort.
+test-le = $(if $(filter $1, $(firstword $(sort $1 $2))),y)
+test-ge = $(call test-le, $2, $1)
+test-lt = $(if $(filter-out $2, $(firstword $(sort $1 $2))),y)
+test-gt = $(call test-lt, $2, $1)
+

I like that whole patch set, thanks! A cherry on the cake would be a sanity check for equal length of A and B ...

Quoted 5 lines
scripts/Kbuild.include +0 -0
 ###
 # Name of target with a '.' as filename prefix. foo/bar.o => foo/.bar.o
 dot-target = $(dir $@).$(notdir $@)
Signature · 1 line
2.34.1
Signature · 3 lines
epost|xmpp: [email protected]          irc://oftc.net/nsc
↳ gpg: 18ed 52db e34f 860e e9fb  c82b 7d97 0932 55a0 ce7f
     -- frykten for herren er opphav til kunnskap --

_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv

maintainer Acked-by on v2 1/5
#14 lore raw
In reply to Masahiro Yamada
Quoted 69 lines · On Wed, 23 Nov 2022 07:18:24 PST (-0800), [email protected] wrote:

Because GNU Make is only able to handle strings, it is very hard to perform arighmetic in Makefiles.

When we compare two integers, we invokes shell. One example is in the top Makefile:

  ifeq ($(shell test $(CONFIG_LLD_VERSION) -lt 130000; echo $$?),0)

This is more expensive than using built-in functions since it forks a process.

If we know the two have the same number of digits, we can do better.

This commit adds four macros, test-le, test-ge, test-lt, test-gt.

$(call test-lt, A, B) is evaluated to 'y' if A is less than B, or empty otherwise. This will replace $(call shell test A -lt B).

Again, the limitation is that A and B must have the same number of digits because these macros are based on $(sort ) function.

  $(call test-lt, 1, 9)    -->  y        (Works!)
  $(call test-lt, 10, 9)   -->  y        (Not work...)

To make the latter work, you need to add '0' prefix to align the number of digits:

  $(call test-lt, 10, 09)  -->  empty    (Works!)

Actually, we can live with this limitation in many places. As for the example above, we know $(CONFIG_LLD_VERSION) is 6-digits because the minimal supported version of LLVM is 11.0.0.

So, the shell invocation can be replaced with more efficient code:

  ifeq ($(call test-lt, $(CONFIG_LLD_VERSION), 130000),y)

Of course, this assumption will break when LLVM 100 is released, but it will be far in the future.

---

(no changes since v1)

 Makefile               |  2 +-
 arch/riscv/Makefile    |  2 +-
 arch/x86/Makefile      |  2 +-
 scripts/Kbuild.include | 10 ++++++++++
 4 files changed, 13 insertions(+), 3 deletions(-)
Makefile +1 -1
index 6f846b1f2618..eb80332f7b51 100644
@@ -986,7 +986,7 @@ KBUILD_LDFLAGS += -mllvm -import-instr-limit=5
 # Check for frame size exceeding threshold during prolog/epilog insertion
 # when using lld < 13.0.0.
 ifneq ($(CONFIG_FRAME_WARN),0)
-ifeq ($(shell test $(CONFIG_LLD_VERSION) -lt 130000; echo $$?),0)
+ifeq ($(call test-lt, $(CONFIG_LLD_VERSION), 130000),y)
 KBUILD_LDFLAGS	+= -plugin-opt=-warn-stack-size=$(CONFIG_FRAME_WARN)
 endif
 endif
arch/riscv/Makefile +0 -0
index 0d13b597cb55..faf2c2177094 100644

arch/riscv/Makefile else · line 43

Quoted 8 lines
arch/riscv/Makefile +1 -1
@@ -37,7 +37,7 @@ else
 endif
 
 ifeq ($(CONFIG_LD_IS_LLD),y)
-ifeq ($(shell test $(CONFIG_LLD_VERSION) -lt 150000; echo $$?),0)
+ifeq ($(call test-lt, $(CONFIG_LLD_VERSION), 150000),y)
 	KBUILD_CFLAGS += -mno-relax
 	KBUILD_AFLAGS += -mno-relax
 ifndef CONFIG_AS_IS_LLVM
Quoted 34 lines
arch/x86/Makefile +1 -1
index 415a5d138de4..e72c7a49cd59 100644
@@ -211,7 +211,7 @@ endif
 KBUILD_LDFLAGS += -m elf_$(UTS_MACHINE)
 
 ifdef CONFIG_LTO_CLANG
-ifeq ($(shell test $(CONFIG_LLD_VERSION) -lt 130000; echo $$?),0)
+ifeq ($(call test-lt, $(CONFIG_LLD_VERSION), 130000),y)
 KBUILD_LDFLAGS	+= -plugin-opt=-stack-alignment=$(if $(CONFIG_X86_32),4,8)
 endif
 endif
scripts/Kbuild.include +10 -0
index cbe28744637b..9996f34327cb 100644
@@ -11,6 +11,16 @@ space   := $(empty) $(empty)
 space_escape := _-_SPACE_-_
 pound := \#
 
+###
+# Comparison macros.
+# Usage: $(call test-le, A, B)
+# works like shell's "test A -le B", but A and B must have the same number of
+# digits since it is just ASCII sort.
+test-le = $(if $(filter $1, $(firstword $(sort $1 $2))),y)
+test-ge = $(call test-le, $2, $1)
+test-lt = $(if $(filter-out $2, $(firstword $(sort $1 $2))),y)
+test-gt = $(call test-lt, $2, $1)
+
 ###
 # Name of target with a '.' as filename prefix. foo/bar.o => foo/.bar.o
 dot-target = $(dir $@).$(notdir $@)
#15 lore raw
In reply to Masahiro Yamada
Quoted 3 lines · Masahiro Yamada

Because GNU Make is only able to handle strings, it is very hard to perform arighmetic in Makefiles.

I terribly missed that GNU Make 4.4
introduced the $(intcmp ...) function.

https://www.gnu.org/software/make/manual/make.html#Conditional-Functions

I am thinking if we can do better by using it.

Quoted 112 lines

When we compare two integers, we invokes shell. One example is in the top Makefile:

  ifeq ($(shell test $(CONFIG_LLD_VERSION) -lt 130000; echo $$?),0)

This is more expensive than using built-in functions since it forks a process.

If we know the two have the same number of digits, we can do better.

This commit adds four macros, test-le, test-ge, test-lt, test-gt.

$(call test-lt, A, B) is evaluated to 'y' if A is less than B, or empty otherwise. This will replace $(call shell test A -lt B).

Again, the limitation is that A and B must have the same number of digits because these macros are based on $(sort ) function.

  $(call test-lt, 1, 9)    -->  y        (Works!)
  $(call test-lt, 10, 9)   -->  y        (Not work...)

To make the latter work, you need to add '0' prefix to align the number of digits:

  $(call test-lt, 10, 09)  -->  empty    (Works!)

Actually, we can live with this limitation in many places. As for the example above, we know $(CONFIG_LLD_VERSION) is 6-digits because the minimal supported version of LLVM is 11.0.0.

So, the shell invocation can be replaced with more efficient code:

  ifeq ($(call test-lt, $(CONFIG_LLD_VERSION), 130000),y)

Of course, this assumption will break when LLVM 100 is released, but it will be far in the future.

---

(no changes since v1)

 Makefile               |  2 +-
 arch/riscv/Makefile    |  2 +-
 arch/x86/Makefile      |  2 +-
 scripts/Kbuild.include | 10 ++++++++++
 4 files changed, 13 insertions(+), 3 deletions(-)
Makefile +1 -1
index 6f846b1f2618..eb80332f7b51 100644
@@ -986,7 +986,7 @@ KBUILD_LDFLAGS += -mllvm -import-instr-limit=5
 # Check for frame size exceeding threshold during prolog/epilog insertion
 # when using lld < 13.0.0.
 ifneq ($(CONFIG_FRAME_WARN),0)
-ifeq ($(shell test $(CONFIG_LLD_VERSION) -lt 130000; echo $$?),0)
+ifeq ($(call test-lt, $(CONFIG_LLD_VERSION), 130000),y)
 KBUILD_LDFLAGS += -plugin-opt=-warn-stack-size=$(CONFIG_FRAME_WARN)
 endif
 endif
arch/riscv/Makefile +1 -1
index 0d13b597cb55..faf2c2177094 100644
@@ -37,7 +37,7 @@ else
 endif
 
 ifeq ($(CONFIG_LD_IS_LLD),y)
-ifeq ($(shell test $(CONFIG_LLD_VERSION) -lt 150000; echo $$?),0)
+ifeq ($(call test-lt, $(CONFIG_LLD_VERSION), 150000),y)
        KBUILD_CFLAGS += -mno-relax
        KBUILD_AFLAGS += -mno-relax
 ifndef CONFIG_AS_IS_LLVM
arch/x86/Makefile +1 -1
index 415a5d138de4..e72c7a49cd59 100644
@@ -211,7 +211,7 @@ endif
 KBUILD_LDFLAGS += -m elf_$(UTS_MACHINE)
 
 ifdef CONFIG_LTO_CLANG
-ifeq ($(shell test $(CONFIG_LLD_VERSION) -lt 130000; echo $$?),0)
+ifeq ($(call test-lt, $(CONFIG_LLD_VERSION), 130000),y)
 KBUILD_LDFLAGS += -plugin-opt=-stack-alignment=$(if $(CONFIG_X86_32),4,8)
 endif
 endif
scripts/Kbuild.include +10 -1
index cbe28744637b..9996f34327cb 100644
@@ -11,6 +11,16 @@ space   := $(empty) $(empty)
 space_escape := _-_SPACE_-_
 pound := \#
 
+###
+# Comparison macros.
+# Usage: $(call test-le, A, B)
+# works like shell's "test A -le B", but A and B must have the same number of
+# digits since it is just ASCII sort.
+test-le = $(if $(filter $1, $(firstword $(sort $1 $2))),y)
+test-ge = $(call test-le, $2, $1)
+test-lt = $(if $(filter-out $2, $(firstword $(sort $1 $2))),y)
+test-gt = $(call test-lt, $2, $1)
+
 ###
 # Name of target with a '.' as filename prefix. foo/bar.o => foo/.bar.o
 dot-target = $(dir $@).$(notdir $@)
--

2.34.1

Signature · 2 lines
Best Regards
Masahiro Yamada