Skip to contentSkip to conversation

USB: serial: cp210x: add Kamstrup RF sniffer PIDs

PATCH In review Bruno Thomsen 2 participants 2 messages Nov 27, 2022 – Nov 28, 2022

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 USB: serial: cp210x: add Kamstrup RF sniffer PIDs

The RF sniffers are based on cp210x where the RF frontends are based on a different USB stack.

RF sniffers can analyze packets meta data including power level and perform packet injection.

Can be used to perform RF frontend self-test when connected to a concentrator, ex. arch/arm/boot/dts/imx7d-flex-concentrator.dts

---
 drivers/usb/serial/cp210x.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/usb/serial/cp210x.c +2 -0
index 3bcec419f463..f6fb23620e87 100644
@@ -195,6 +195,8 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */
 	{ USB_DEVICE(0x17A8, 0x0001) }, /* Kamstrup Optical Eye/3-wire */
 	{ USB_DEVICE(0x17A8, 0x0005) }, /* Kamstrup M-Bus Master MultiPort 250D */
+	{ USB_DEVICE(0x17A8, 0x0011) }, /* Kamstrup 444 MHz RF sniffer */
+	{ USB_DEVICE(0x17A8, 0x0013) }, /* Kamstrup 870 MHz RF sniffer */
 	{ USB_DEVICE(0x17A8, 0x0101) }, /* Kamstrup 868 MHz wM-Bus C-Mode Meter Reader (Int Ant) */
 	{ USB_DEVICE(0x17A8, 0x0102) }, /* Kamstrup 868 MHz wM-Bus C-Mode Meter Reader (Ext Ant) */
 	{ USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */

base-commit: faf68e3523c21d07c5f7fdabd0daf6301ff8db3f

Signature · 1 line
2.38.1
maintainer
#1 lore raw
Quoted 10 lines · Bruno Thomsen

The RF sniffers are based on cp210x where the RF frontends are based on a different USB stack.

RF sniffers can analyze packets meta data including power level and perform packet injection.

Can be used to perform RF frontend self-test when connected to a concentrator, ex. arch/arm/boot/dts/imx7d-flex-concentrator.dts

Applied for 6.2, thanks.

Johan