ASoC: Intel: avs: Add support for RT5663 codec
Subsystems (3)
PATCH 1/1 ASoC: Intel: avs: Add support for RT5663 codec
This patch adds support for RT5663 codec on KBL platform.
Such hardware configuration can be found in Google Pixelbook (Google/Eve).
sound/soc/intel/avs/board_selection.c +8 -0
@@ -159,6 +159,14 @@ static struct snd_soc_acpi_mach avs_kbl_i2s_machines[] = { }, .tplg_filename = "da7219-tplg.bin", }, + { + .id = "10EC5663", + .drv_name = "avs_rt5663", + .mach_params = { + .i2s_link_mask = AVS_SSP(1), + }, + .tplg_filename = "rt5663-tplg.bin", + }, {}, };
sound/soc/intel/avs/boards/Kconfig +10 -0
@@ -125,6 +125,16 @@ config SND_SOC_INTEL_AVS_MACH_RT5682 Say Y or m if you have such a device. This is a recommended option. If unsure select "N". +config SND_SOC_INTEL_AVS_MACH_RT5663 + tristate "rt5663 in I2S mode" + depends on I2C + depends on MFD_INTEL_LPSS || COMPILE_TEST + select SND_SOC_RT5663_I2C + help + This adds support for ASoC machine driver with RT5663 I2S audio codec. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". + config SND_SOC_INTEL_AVS_MACH_SSM4567 tristate "ssm4567 I2S board" depends on I2C
sound/soc/intel/avs/boards/Makefile +2 -0
@@ -13,6 +13,7 @@ snd-soc-avs-rt274-objs := rt274.o snd-soc-avs-rt286-objs := rt286.o snd-soc-avs-rt298-objs := rt298.o snd-soc-avs-rt5682-objs := rt5682.o +snd-soc-avs-rt5663-objs := rt5663.o snd-soc-avs-ssm4567-objs := ssm4567.o obj-$(CONFIG_SND_SOC_INTEL_AVS_MACH_DA7219) += snd-soc-avs-da7219.o
@@ -28,4 +29,5 @@ obj-$(CONFIG_SND_SOC_INTEL_AVS_MACH_RT274) += snd-soc-avs-rt274.o obj-$(CONFIG_SND_SOC_INTEL_AVS_MACH_RT286) += snd-soc-avs-rt286.o obj-$(CONFIG_SND_SOC_INTEL_AVS_MACH_RT298) += snd-soc-avs-rt298.o obj-$(CONFIG_SND_SOC_INTEL_AVS_MACH_RT5682) += snd-soc-avs-rt5682.o +obj-$(CONFIG_SND_SOC_INTEL_AVS_MACH_RT5663) += snd-soc-avs-rt5663.o obj-$(CONFIG_SND_SOC_INTEL_AVS_MACH_SSM4567) += snd-soc-avs-ssm4567.o
sound/soc/intel/avs/boards/rt5663.c new file +249 -0
249 lines not on this page · raw message
Quoted 22 lines
sound/soc/intel/avs/boards/rt5663.c new file +21
-0+static int avs_create_dai_link (struct device *dev,const char *platform_name,int ssp_port, +struct snd_soc_dai_link **dai_link) +{ +struct snd_soc_dai_link_component *platform; +struct snd_soc_dai_link *dl; + + dl =devm_kzalloc (dev,sizeof (*dl),GFP_KERNEL ); + platform =devm_kzalloc (dev,sizeof (*platform),GFP_KERNEL ); +if (!dl || !platform) +return -ENOMEM ; + + platform->name = platform_name; + + dl->name =devm_kasprintf (dev,GFP_KERNEL ,"SSP%d-Codec" , ssp_port); + dl->cpus =devm_kzalloc (dev,sizeof (*dl->cpus),GFP_KERNEL ); + dl->codecs =devm_kzalloc (dev,sizeof (*dl->codecs),GFP_KERNEL ); +if (!dl->name || !dl->cpus || !dl->codecs) +return -ENOMEM ; + + dl->cpus->dai_name =devm_kasprintf (dev,GFP_KERNEL ,"SSP%d Pin" , ssp_port); + dl->codecs->name =devm_kasprintf (dev,GFP_KERNEL ,"i2c-10EC5663:00" );
sound/soc/intel/avs/boards/rt5663.c line 111
Quoted 10 lines
sound/soc/intel/avs/boards/rt5663.c new file +10
-0+ dl->codecs->dai_name =RT5663_DAI_NAME ; +if (!dl->cpus->dai_name || !dl->codecs->name || !dl->codecs->dai_name) +return -ENOMEM ; + + dl->num_cpus =1 ; + dl->num_codecs =1 ; + dl->platforms = platform; + dl->num_platforms =1 ; + dl->id =0 ; + dl->dai_fmt =SND_SOC_DAIFMT_I2S |SND_SOC_DAIFMT_NB_NF |SND_SOC_DAIFMT_CBS_CFS ;
can I ask why it's necessary to hard-code the format, shouldn't this be specified in the topology?
It's a generic question for AVS machine drivers, the same code is found in other cases.
Quoted 10 lines
sound/soc/intel/avs/boards/rt5663.c new file +10
-0+ dl->init = avs_rt5663_codec_init; + dl->nonatomic =1 ; + dl->no_pcm =1 ; + dl->dpcm_capture =1 ; + dl->dpcm_playback =1 ; + + *dai_link = dl; + +return 0 ; +}
Quoted 36 lines · Pierre-Louis Bossart
Quoted 22 lines
sound/soc/intel/avs/boards/rt5663.c new file +21
-0+static int avs_create_dai_link (struct device *dev,const char *platform_name,int ssp_port, +struct snd_soc_dai_link **dai_link) +{ +struct snd_soc_dai_link_component *platform; +struct snd_soc_dai_link *dl; + + dl =devm_kzalloc (dev,sizeof (*dl),GFP_KERNEL ); + platform =devm_kzalloc (dev,sizeof (*platform),GFP_KERNEL ); +if (!dl || !platform) +return -ENOMEM ; + + platform->name = platform_name; + + dl->name =devm_kasprintf (dev,GFP_KERNEL ,"SSP%d-Codec" , ssp_port); + dl->cpus =devm_kzalloc (dev,sizeof (*dl->cpus),GFP_KERNEL ); + dl->codecs =devm_kzalloc (dev,sizeof (*dl->codecs),GFP_KERNEL ); +if (!dl->name || !dl->cpus || !dl->codecs) +return -ENOMEM ; + + dl->cpus->dai_name =devm_kasprintf (dev,GFP_KERNEL ,"SSP%d Pin" , ssp_port); + dl->codecs->name =devm_kasprintf (dev,GFP_KERNEL ,"i2c-10EC5663:00" );sound/soc/intel/avs/boards/rt5663.c line 111
Quoted 10 lines
sound/soc/intel/avs/boards/rt5663.c new file +10
-0+ dl->codecs->dai_name =RT5663_DAI_NAME ; +if (!dl->cpus->dai_name || !dl->codecs->name || !dl->codecs->dai_name) +return -ENOMEM ; + + dl->num_cpus =1 ; + dl->num_codecs =1 ; + dl->platforms = platform; + dl->num_platforms =1 ; + dl->id =0 ; + dl->dai_fmt =SND_SOC_DAIFMT_I2S |SND_SOC_DAIFMT_NB_NF |SND_SOC_DAIFMT_CBS_CFS ;can I ask why it's necessary to hard-code the format, shouldn't this be specified in the topology?
Quoted 3 lines
It's a generic question for AVS machine drivers, the same code is found in other cases.
It describes back-end and topology describes FEs and FE and BE DSP configuration, machine boards describe BE configuration. Not to say that I didn't wonder if we can perhaps simplify things some more and move BE declaration to topology and perhaps even implement generic i2s board. It is something to revisit.
Quoted 47 lines · Amadeusz Sławiński
Quoted 42 lines · Pierre-Louis Bossart
Quoted 30 lines
+static int avs_create_dai_link(struct device *dev, const char
*platform_name, intssp_port,
+ structsnd_soc_dai_link**dai_link)sound/soc/intel/avs/boards/rt5663.c new file +12
-0+{ + struct snd_soc_dai_link_component *platform; + struct snd_soc_dai_link *dl; + + dl = devm_kzalloc(dev, sizeof(*dl), GFP_KERNEL); + platform = devm_kzalloc(dev, sizeof(*platform), GFP_KERNEL); + if (!dl || !platform) + return -ENOMEM; + + platform->name = platform_name; + + dl->name = devm_kasprintf(dev, GFP_KERNEL, "SSP%d-Codec",
ssp_port);
+dl->cpus=devm_kzalloc(dev, sizeof(*dl->cpus), GFP_KERNEL); +dl->codecs=devm_kzalloc(dev, sizeof(*dl->codecs), GFP_KERNEL); + if (!dl->name || !dl->cpus || !dl->codecs)
+ return-ENOMEM;
+
+dl->cpus->dai_name=devm_kasprintf(dev, GFP_KERNEL, "SSP%d Pin", ssp_port);
+dl->codecs->name=devm_kasprintf(dev, GFP_KERNEL, "i2c-10EC5663:00");
+dl->codecs->dai_name=RT5663_DAI_NAME;
+ if (!dl->cpus->dai_name || !dl->codecs->name || !dl->codecs->dai_name)
+ return-ENOMEM;Quoted 8 lines
+
+dl->num_cpus= 1;
+dl->num_codecs= 1;
+dl->platforms= platform;
+dl->num_platforms= 1;
+dl->id= 0;
+dl->dai_fmt=SND_SOC_DAIFMT_I2S|SND_SOC_DAIFMT_NB_NF|SND_SOC_DAIFMT_CBS_CFS;can I ask why it's necessary to hard-code the format, shouldn't this be specified in the topology?
Quoted 3 lines
It's a generic question for AVS machine drivers, the same code is found in other cases.
Quoted 5 lines
It describes back-end and topology describes FEs and FE and BE DSP configuration, machine boards describe BE configuration. Not to say that I didn't wonder if we can perhaps simplify things some more and move BE declaration to topology and perhaps even implement generic i2s board. It is something to revisit.
My point is that the topology already provides the information for the DSP configuration and this is used for the codec configuration, but that's two pieces of information that need to match, and two things to change if for some reason you want to use different options.
Quoted 6 lines · Alicja Michalska
This patch adds support for RT5663 codec on KBL platform.
Such hardware configuration can be found in Google Pixelbook (Google/Eve).Reported-and-tested-by CoolStar <[email protected]>Signed-off-by Alicja Michalska <[email protected]>
I've added few comments, but overall it looks ok, some minor differences from internal code I wrote for this device, but that can be changed later if we see that it is needed. The most important parts look fine to me.
Quoted 27 lines
sound/soc/intel/avs/board_selection.c +8
-0@@ -159,6 +159,14 @@ static struct snd_soc_acpi_mach avs_kbl_i2s_machines[] = { }, .tplg_filename = "da7219-tplg.bin", }, + { + .id = "10EC5663", + .drv_name = "avs_rt5663", + .mach_params = { + .i2s_link_mask = AVS_SSP(1), + }, + .tplg_filename = "rt5663-tplg.bin", + }, {}, };sound/soc/intel/avs/boards/Kconfig +0
-0@@ -125,6 +125,16 @@ config SND_SOC_INTEL_AVS_MACH_RT5682 Say Y or m if you have such a device. This is a recommended option. If unsure select "N".
sound/soc/intel/avs/boards/Kconfig config SND_SOC_INTEL_AVS_MACH_RT5682 · line 137
Quoted 10 lines
sound/soc/intel/avs/boards/Kconfig +10
-0+config SND_SOC_INTEL_AVS_MACH_RT5663 + tristate "rt5663 in I2S mode" + depends on I2C + depends on MFD_INTEL_LPSS || COMPILE_TEST + select SND_SOC_RT5663_I2C + help + This adds support for ASoC machine driver with RT5663 I2S audio codec. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". +
Add it before SND_SOC_INTEL_AVS_MACH_RT5682.
sound/soc/intel/avs/boards/Makefile snd-soc-avs-rt274-objs := rt274.o · line 16
Quoted 12 lines
sound/soc/intel/avs/boards/Kconfig +0
-0config SND_SOC_INTEL_AVS_MACH_SSM4567 tristate "ssm4567 I2S board" depends on I2Csound/soc/intel/avs/boards/Makefile +1
-0@@ -13,6 +13,7 @@ snd-soc-avs-rt274-objs := rt274.o snd-soc-avs-rt286-objs := rt286.o snd-soc-avs-rt298-objs := rt298.o snd-soc-avs-rt5682-objs := rt5682.o +snd-soc-avs-rt5663-objs := rt5663.o
Add it in alphabetical order.
sound/soc/intel/avs/boards/Makefile obj-$(CONFIG_SND_SOC_INTEL_AVS_MACH_RT274) += snd-soc-avs-rt274.o · line 32
Quoted 8 lines
sound/soc/intel/avs/boards/Makefile +1
-0snd-soc-avs-ssm4567-objs := ssm4567.o obj-$(CONFIG_SND_SOC_INTEL_AVS_MACH_DA7219) += snd-soc-avs-da7219.o@@ -28,4 +29,5 @@ obj-$(CONFIG_SND_SOC_INTEL_AVS_MACH_RT274) += snd-soc-avs-rt274.o obj-$(CONFIG_SND_SOC_INTEL_AVS_MACH_RT286) += snd-soc-avs-rt286.o obj-$(CONFIG_SND_SOC_INTEL_AVS_MACH_RT298) += snd-soc-avs-rt298.o obj-$(CONFIG_SND_SOC_INTEL_AVS_MACH_RT5682) += snd-soc-avs-rt5682.o +obj-$(CONFIG_SND_SOC_INTEL_AVS_MACH_RT5663) += snd-soc-avs-rt5663.o
Same here.
sound/soc/intel/avs/boards/rt5663.c line 4
Quoted 11 lines
sound/soc/intel/avs/boards/Makefile +0
-0obj-$(CONFIG_SND_SOC_INTEL_AVS_MACH_SSM4567) += snd-soc-avs-ssm4567.osound/soc/intel/avs/boards/rt5663.c new file +4
-0@@ -0,0 +1,249 @@ +// SPDX-License-Identifier: GPL-2.0-only +// +// Copyright(c) CoolStar. All rights reserved. +// Based off da7219 module
No need to mention on which module it is based, they are all based on each other and also Skylake driver boards ;).
Quoted 35 lines
sound/soc/intel/avs/boards/rt5663.c new file +35
-0+// Copyright(c) 2021-2022 Intel Corporation. All rights reserved. +// +// Author: CoolStar <coolstarorganization.com> +// Author: Cezary Rojewski <[email protected]> +// + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <sound/jack.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-acpi.h> +#include <sound/soc-dapm.h> +#include <uapi/linux/input-event-codes.h> +#include "../../../codecs/rt5663.h" + +#define RT5663_DAI_NAME "rt5663-aif" + +static const struct snd_kcontrol_new card_controls[] = { +SOC_DAPM_PIN_SWITCH ("Headphone Jack" ), +SOC_DAPM_PIN_SWITCH ("Headset Mic" ), +}; + +static const struct snd_soc_dapm_widget card_widgets[] = { +SND_SOC_DAPM_HP ("Headphone Jack" ,NULL ), +SND_SOC_DAPM_MIC ("Headset Mic" ,NULL ), +}; + +static const struct snd_soc_dapm_route card_base_routes[] = { +/* HP jack connectors - unknown if we have jack detection */ + {"Headphone Jack" ,NULL ,"HPOL" }, + {"Headphone Jack" ,NULL ,"HPOR" }, + + {"IN1P" ,NULL ,"Headset Mic" },
sound/soc/intel/avs/boards/rt5663.c line 49
Quoted 10 lines
sound/soc/intel/avs/boards/rt5663.c new file +10
-0+ {"IN1N", NULL, "Headset Mic"}, +}; + +static int avs_rt5663_codec_init (struct snd_soc_pcm_runtime *runtime) +{ +struct snd_soc_component *component =asoc_rtd_to_codec (runtime,0 )->component; +struct snd_soc_card *card = runtime->card; +struct snd_soc_jack *jack; +struct snd_soc_dai *codec_dai =asoc_rtd_to_codec (runtime,0 ); +int ret;
Reverse Christmas tree style.
sound/soc/intel/avs/boards/rt5663.c line 52
Quoted 3 lines
sound/soc/intel/avs/boards/rt5663.c new file +3
-0+ + jack =snd_soc_card_get_drvdata (card); +
There is a comment in Skylake machine driver:
/* use ASRC for internal clocks, as PLL rate isn't multiple of BCLK */ I think it is good to have it before calling this function.
sound/soc/intel/avs/boards/rt5663.c line 53
Quoted 1 line
sound/soc/intel/avs/boards/rt5663.c new file +1
-0+ rt5663_sel_asrc_clk_src(component,
Just use codec_dai->component as argument here and component in declarations above can be removed then.
sound/soc/intel/avs/boards/rt5663.c line 59
Quoted 6 lines
sound/soc/intel/avs/boards/rt5663.c new file +6
-0+RT5663_DA_STEREO_FILTER |RT5663_AD_STEREO_FILTER , + RT5663_CLK_SEL_I2S1_ASRC); + +snd_soc_dai_set_sysclk (codec_dai, +RT5663_SCLK_S_MCLK ,24576000 ,SND_SOC_CLOCK_IN ); +
Just a note, that in internal code I did same as Skylake machine driver and put above two functions in separate _hw_params function, but putting it in codec_init should also be fine.
Quoted 33 lines
sound/soc/intel/avs/boards/rt5663.c new file +33
-0+/* +* Headset buttons map to the google Reference headset. +* These can be configured by userspace. +*/ + ret =snd_soc_card_jack_new (card,"Headset Jack" , +SND_JACK_HEADSET |SND_JACK_BTN_0 | +SND_JACK_BTN_1 |SND_JACK_BTN_2 | +SND_JACK_BTN_3 |SND_JACK_LINEOUT , jack); +if (ret) { +dev_err (card->dev,"Headset Jack creation failed: %d\n" , ret); +return ret; + } + +snd_jack_set_key (jack->jack,SND_JACK_BTN_0 ,KEY_PLAYPAUSE ); +snd_jack_set_key (jack->jack,SND_JACK_BTN_1 ,KEY_VOLUMEUP ); +snd_jack_set_key (jack->jack,SND_JACK_BTN_2 ,KEY_VOLUMEDOWN ); +snd_jack_set_key (jack->jack,SND_JACK_BTN_3 ,KEY_VOICECOMMAND ); + +return 0 ; +} + +static int avs_create_dai_link (struct device *dev,const char *platform_name,int ssp_port, +struct snd_soc_dai_link **dai_link) +{ +struct snd_soc_dai_link_component *platform; +struct snd_soc_dai_link *dl; + + dl =devm_kzalloc (dev,sizeof (*dl),GFP_KERNEL ); + platform =devm_kzalloc (dev,sizeof (*platform),GFP_KERNEL ); +if (!dl || !platform) +return -ENOMEM ; + + platform->name = platform_name;
sound/soc/intel/avs/boards/rt5663.c line 102
Quoted 10 lines
sound/soc/intel/avs/boards/rt5663.c new file +10
-0+ + dl->name =devm_kasprintf (dev,GFP_KERNEL ,"SSP%d-Codec" , ssp_port); + dl->cpus =devm_kzalloc (dev,sizeof (*dl->cpus),GFP_KERNEL ); + dl->codecs =devm_kzalloc (dev,sizeof (*dl->codecs),GFP_KERNEL ); +if (!dl->name || !dl->cpus || !dl->codecs) +return -ENOMEM ; + + dl->cpus->dai_name =devm_kasprintf (dev,GFP_KERNEL ,"SSP%d Pin" , ssp_port); + dl->codecs->name =devm_kasprintf (dev,GFP_KERNEL ,"i2c-10EC5663:00" ); + dl->codecs->dai_name =RT5663_DAI_NAME ;
dl->codecs->dai_name = devm_kasprintf(dev, GFP_KERNEL, RT5663_DAI_NAME);
Quoted 50 lines
sound/soc/intel/avs/boards/rt5663.c new file +50
-0+if (!dl->cpus->dai_name || !dl->codecs->name || !dl->codecs->dai_name) +return -ENOMEM ; + + dl->num_cpus =1 ; + dl->num_codecs =1 ; + dl->platforms = platform; + dl->num_platforms =1 ; + dl->id =0 ; + dl->dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS; > + dl->init = avs_rt5663_codec_init; + dl->nonatomic =1 ; + dl->no_pcm =1 ; + dl->dpcm_capture =1 ; + dl->dpcm_playback =1 ; + + *dai_link = dl; + +return 0 ; +} + +static int avs_create_dapm_routes (struct device *dev,int ssp_port, +struct snd_soc_dapm_route **routes,int *num_routes) +{ +struct snd_soc_dapm_route *dr; +const int num_base =ARRAY_SIZE (card_base_routes); +const int num_dr = num_base +2 ; +int idx; + + dr =devm_kcalloc (dev, num_dr,sizeof (*dr),GFP_KERNEL ); +if (!dr) +return -ENOMEM ; + +memcpy (dr, card_base_routes, num_base *sizeof (*dr)); + + idx = num_base; + dr[idx].sink =devm_kasprintf (dev,GFP_KERNEL ,"AIF Playback" ); + dr[idx].source =devm_kasprintf (dev,GFP_KERNEL ,"ssp%d Tx" , ssp_port); +if (!dr[idx].sink || !dr[idx].source) +return -ENOMEM ; + + idx++; + dr[idx].sink =devm_kasprintf (dev,GFP_KERNEL ,"ssp%d Rx" , ssp_port); + dr[idx].source =devm_kasprintf (dev,GFP_KERNEL ,"AIF Capture" ); +if (!dr[idx].sink || !dr[idx].source) +return -ENOMEM ; + + *routes = dr; + *num_routes = num_dr; + +return 0 ; +}
sound/soc/intel/avs/boards/rt5663.c line 163
Quoted 10 lines
sound/soc/intel/avs/boards/rt5663.c new file +10
-0+ +static int avs_card_set_jack (struct snd_soc_card *card,struct snd_soc_jack *jack) +{ +struct snd_soc_component *component; + +for_each_card_components (card, component) +snd_soc_component_set_jack (component, jack,NULL ); +return 0 ; +} +
This change seems to be based on a bit older code, take a look at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git/commit/sound/soc/intel/avs/boards/da7219.c?id=833e250ef592c3c02dda400c1c44306f74241d33
this will remove the above function and change jack handling to better flow. As mentioned in above commit we don't need to loop to find jack, as we can find right component using codec name.
Quoted 86 lines
sound/soc/intel/avs/boards/rt5663.c new file +86
-0+static int avs_card_remove (struct snd_soc_card *card) +{ +return avs_card_set_jack (card,NULL ); +} + +static int avs_card_suspend_pre (struct snd_soc_card *card) +{ +return avs_card_set_jack (card,NULL ); +} + +static int avs_card_resume_post (struct snd_soc_card *card) +{ +struct snd_soc_jack *jack =snd_soc_card_get_drvdata (card); + +return avs_card_set_jack (card, jack); +} + +static int avs_rt5663_probe (struct platform_device *pdev) +{ +struct snd_soc_dapm_route *routes; +struct snd_soc_dai_link *dai_link; +struct snd_soc_acpi_mach *mach; +struct snd_soc_card *card; +struct snd_soc_jack *jack; +struct device *dev = &pdev->dev; +const char *pname; +int num_routes, ssp_port, ret; + + mach =dev_get_platdata (dev); + pname = mach->mach_params.platform; + ssp_port =__ffs (mach->mach_params.i2s_link_mask); + + ret =avs_create_dai_link (dev, pname, ssp_port, &dai_link); +if (ret) { +dev_err (dev,"Failed to create dai link: %d" , ret); +return ret; + } + + ret =avs_create_dapm_routes (dev, ssp_port, &routes, &num_routes); +if (ret) { +dev_err (dev,"Failed to create dapm routes: %d" , ret); +return ret; + } + + jack =devm_kzalloc (dev,sizeof (*jack),GFP_KERNEL ); + card =devm_kzalloc (dev,sizeof (*card),GFP_KERNEL ); +if (!jack || !card) +return -ENOMEM ; + + card->name ="avs_rt5663" ; + card->dev = dev; + card->owner =THIS_MODULE ; + card->remove = avs_card_remove; + card->suspend_pre = avs_card_suspend_pre; + card->resume_post = avs_card_resume_post; + card->dai_link = dai_link; + card->num_links =1 ; + card->controls = card_controls; + card->num_controls =ARRAY_SIZE (card_controls); + card->dapm_widgets = card_widgets; + card->num_dapm_widgets =ARRAY_SIZE (card_widgets); + card->dapm_routes = routes; + card->num_dapm_routes = num_routes; + card->fully_routed = true; +snd_soc_card_set_drvdata (card, jack); + + ret =snd_soc_fixup_dai_links_platform_name (card, pname); +if (ret) +return ret; + +return devm_snd_soc_register_card (dev, card); +} + +static struct platform_driver avs_rt5663_driver = { + .probe = avs_rt5663_probe, + .driver = { + .name ="avs_rt5663" , + .pm = &snd_soc_pm_ops, + }, +}; + +module_platform_driver (avs_rt5663_driver); + +MODULE_AUTHOR ("CoolStar <[email protected]>" ); +MODULE_LICENSE ("GPL" ); +MODULE_ALIAS ("platform:avs_rt5663" );