New: KVM instruction emulation breaks LOCK instruction atomicity when CMPXCHG fails
https://bugzilla.kernel.org/show_bug.cgi?id=216867
Bug ID: 216867
Summary: KVM instruction emulation breaks LOCK instruction
atomicity when CMPXCHG fails
Product: Virtualization
Version: unspecified
Kernel Version: 6.0.14-300.fc37.x86_64
Hardware: All
OS: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: kvm
Assignee: [email protected]
Reporter: [email protected]
Regression: No
Created attachment 303502
--> https://bugzilla.kernel.org/attachment.cgi?id=303502&action=edit
c.img.xz: Guest software to reproduce this bug (xz compressed)
Host CPU model: 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz Host kernel version: 6.0.14-300.fc37.x86_64
Host kernel arch: x86_64
Guest: a system level software (called LHV) I wrote myself, 32-bits, compressed and attached as c.img.xz.
QEMU command line: qemu-system-i386 -m 256M -smp 4 -enable-kvm -serial stdio -drive media=disk,file=c.img
The problem does not go away if using -machine kernel_irqchip=off The problem goes away if -accel tcg is used (also remove -enable-kvm)
Actual behavior: serial port shows a few lines, then stops. Example:
...
counts: count0 count1 count2 count0-count1+count2
counts: 1 0 1 0
counts: 2 1 1 0
counts: 3 2 1 0
counts: 4 2 3 -1
counts: 5 3 4 -2
counts: 6 3 5 -2
counts: 7 4 6 -3
counts: 8 4 7 -3
counts: 9 4 8 -3
counts: 10 5 8 -3
(no more outputs due to deadlock)
Usually the output is shorter. Sometimes only the table header.
Expected behaivor (reproducible using TCG): serial port shows:
...
counts: count0 count1 count2 count0-count1+count2
counts: 1 0 1 0
counts: 2 1 1 0
counts: 3 1 2 0
counts: 4 2 2 0
counts: 5 2 3 0
counts: 6 3 3 0
counts: 7 3 4 0
counts: 8 4 4 0
counts: 9 5 4 0
counts: 10 5 5 0
counts: 11 5 6 0
counts: 12 6 6 0
counts: 13 7 6 0
...
Explanation:
See the following for source code, line 5 - 89:
My code performs the following experiment repeatedly on 3 CPUs:
* Initially, "ptr" at address 0xb8000 (VGA memory mapped I/O) is set to 0
* CPU 0 writes 0x12345678 to ptr, then increases counter "count0".
* In an infinite loop, CPU 1 tries exchanges ptr with register EAX (contains 0) using the XCHG instruction. If CPU 1 sees 0x12345678, it increases counter "count1".
* CPU 2's behavior is similar to CPU 1, except it increases counter "count2" when it sees 0x12345678.
Ideally, after each experiment there should always be count1 + count2 = count0. However, in KVM, there may be count1 + count2 > count0. This because CPU 0 writes 0x12345678 to ptr once, but CPU 1 and CPU 2 both get 0x12345678 in XCHG. Note that XCHG instruction always implements the locking protocol.
There is also a deadlock after running the experiment a few times. However I am not trying to explain it for now.
Guessed cause:
I guess that KVM emulates the XCHG instruction that accesses 0xb8000. The call stack should be:
...
x86_emulate_instruction (arch/x86/kvm/x86.c)
x86_emulate_insn (arch/x86/kvm/emulate.c)
writeback (arch/x86/kvm/emulate.c)
segmented_cmpxchg (arch/x86/kvm/emulate.c)
emulator_cmpxchg_emulated (arch/x86/kvm/x86.c, ->cmpxchg_emulated)
emulator_try_cmpxchg_user (arch/x86/kvm/x86.c)
...
CMPXCHG instructionSuppose CPU 2 wants to write 0 to ptr using writeback(), and expecting ptr to already contain 0x13245678. However, CPU 1 changes the content of ptr to 0. So
* The CMPXCHG instruction fails (clears ZF).
* emulator_try_cmpxchg_user returns 1.
* emulator_cmpxchg_emulated() returns X86EMUL_CMPXCHG_FAILED.
* segmented_cmpxchg() returns X86EMUL_CMPXCHG_FAILED.
* writeback() returns X86EMUL_CMPXCHG_FAILED.
* x86_emulate_insn() returns EMULATION_OK.
Thus, I think the root cause of this bug is that x86_emulate_insn() ignores the X86EMUL_CMPXCHG_FAILED error. The correct behavior should be retrying the emulation using the updated value (similar to load-linked/store-conditional).
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
Sean Christopherson
reviewerQuoted 10 lines · On Fri, Dec 30, 2022, [email protected] wrote:
My code performs the following experiment repeatedly on 3 CPUs:
* Initially, "ptr" at address
0xb8000(VGA memory mapped I/O) is set to 0
* CPU 0 writes0x12345678to ptr, then increases counter "count0".
* In an infinite loop, CPU 1 tries exchanges ptr with register EAX (contains 0) using the XCHG instruction. If CPU 1 sees0x12345678, it increases counter "count1".
* CPU 2's behavior is similar to CPU 1, except it increases counter "count2" when it sees0x12345678.
Quoted 7 lines
Ideally, after each experiment there should always be count1 + count2 = count0. However, in KVM, there may be count1 + count2 > count0. This because CPU 0 writes
0x12345678to ptr once, but CPU 1 and CPU 2 both get0x12345678in XCHG. Note that XCHG instruction always implements the locking protocol.There is also a deadlock after running the experiment a few times. However I am not trying to explain it for now.
Is the suspect deadlock in userspace, the guest, or in the host kernel?
Quoted 24 lines
Guessed cause:
I guess that KVM emulates the XCHG instruction that accesses
0xb8000. The call stack should be:...
x86_emulate_instruction(arch/x86/kvm/x86.c)
x86_emulate_insn(arch/x86/kvm/emulate.c)
writeback (arch/x86/kvm/emulate.c)segmented_cmpxchg (arch/x86/kvm/emulate.c) emulator_cmpxchg_emulated (arch/x86/kvm/x86.c, ->cmpxchg_emulated) emulator_try_cmpxchg_user (arch/x86/kvm/x86.c) ... CMPXCHG instructionSuppose CPU 2 wants to write 0 to ptr using
writeback(), and expecting ptr to already contain0x13245678. However, CPU 1 changes the content of ptr to 0. So
* The CMPXCHG instruction fails (clears ZF).
*emulator_try_cmpxchg_userreturns 1.
*emulator_cmpxchg_emulated()returnsX86EMUL_CMPXCHG_FAILED.
*segmented_cmpxchg()returnsX86EMUL_CMPXCHG_FAILED.
*writeback()returnsX86EMUL_CMPXCHG_FAILED.
*x86_emulate_insn()returnsEMULATION_OK.
Quoted 3 lines
Thus, I think the root cause of this bug is that
x86_emulate_insn()ignores theX86EMUL_CMPXCHG_FAILEDerror. The correct behavior should be retrying the emulation using the updated value (similar to load-linked/store-conditional).
KVM does retry the emulation, albeit in a very roundabout and non-robust way. On X86EMUL_CMPXCHG_FAILED, x86_emulate_insn() skips the EIP update and doesn't writeback GPRs. x86_emulate_instruction() is flawed and emulates single-step, but the "eip" written should be the original RIP, i.e. shouldn't advance past the instructions being emulated. The single-step mess should be fixed, but I doubt that's the root cause here.
Is there a memslot for 0xb8000? I assume not since KVM is emulating (have you actually verified that, e.g. with tracepoints?). KVM's ABI doesn't support atomic MMIO operations, i.e. if there's no memslot, KVM will effectively drop the LOCK semantics. If that's indeed what's happening, you should see
kvm: emulating exchange as write
in the host dmesg (just once though).
[Bug 216867] KVM instruction emulation breaks LOCK instruction atomicity when CMPXCHG fails
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=216867
--- Comment #1 from Sean Christopherson ([email protected]) ---
Quoted 18 lines · On Fri, Dec 30, 2022, [email protected] wrote:
My code performs the following experiment repeatedly on 3 CPUs:
* Initially, "ptr" at address
0xb8000(VGA memory mapped I/O) is set to 0
* CPU 0 writes0x12345678to ptr, then increases counter "count0".
* In an infinite loop, CPU 1 tries exchanges ptr with register EAX (contains
0)
using the XCHG instruction. If CPU 1 sees0x12345678, it increases counter "count1".
* CPU 2's behavior is similar to CPU 1, except it increases counter "count2" when it sees0x12345678.Ideally, after each experiment there should always be count1 + count2 = count0.
However, in KVM, there may be count1 + count2 > count0. This because CPU 0 writes0x12345678to ptr once, but CPU 1 and CPU 2 both get0x12345678in XCHG.
Note that XCHG instruction always implements the locking protocol.
Quoted 3 lines
There is also a deadlock after running the experiment a few times. However I am
not trying to explain it for now.
Is the suspect deadlock in userspace, the guest, or in the host kernel?
Quoted 26 lines
Guessed cause:
I guess that KVM emulates the XCHG instruction that accesses
0xb8000. The call
stack should be:...
x86_emulate_instruction(arch/x86/kvm/x86.c)
x86_emulate_insn(arch/x86/kvm/emulate.c)
writeback (arch/x86/kvm/emulate.c)segmented_cmpxchg (arch/x86/kvm/emulate.c) emulator_cmpxchg_emulated (arch/x86/kvm/x86.c, ->cmpxchg_emulated) emulator_try_cmpxchg_user (arch/x86/kvm/x86.c) ... CMPXCHG instructionSuppose CPU 2 wants to write 0 to ptr using
writeback(), and expecting ptr to already contain0x13245678. However, CPU 1 changes the content of ptr to 0. So
* The CMPXCHG instruction fails (clears ZF).
*emulator_try_cmpxchg_userreturns 1.
*emulator_cmpxchg_emulated()returnsX86EMUL_CMPXCHG_FAILED.
*segmented_cmpxchg()returnsX86EMUL_CMPXCHG_FAILED.
*writeback()returnsX86EMUL_CMPXCHG_FAILED.
*x86_emulate_insn()returnsEMULATION_OK.
Quoted 4 lines
Thus, I think the root cause of this bug is that
x86_emulate_insn()ignores theX86EMUL_CMPXCHG_FAILEDerror. The correct behavior should be retrying the emulation using the updated value (similar to load-linked/store-conditional).
KVM does retry the emulation, albeit in a very roundabout and non-robust way. On X86EMUL_CMPXCHG_FAILED, x86_emulate_insn() skips the EIP update and doesn't writeback GPRs. x86_emulate_instruction() is flawed and emulates single-step, but
the "eip" written should be the original RIP, i.e. shouldn't advance past the instructions being emulated. The single-step mess should be fixed, but I doubt that's the root cause here.
Is there a memslot for 0xb8000? I assume not since KVM is emulating (have you actually verified that, e.g. with tracepoints?). KVM's ABI doesn't support atomic MMIO operations, i.e. if there's no memslot, KVM will effectively drop the LOCK semantics. If that's indeed what's happening, you should see
kvm: emulating exchange as write
in the host dmesg (just once though).
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 216867] KVM instruction emulation breaks LOCK instruction atomicity when CMPXCHG fails
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=216867
--- Comment #2 from Eric Li ([email protected]) ---
Quoted 30 lines · 在 2023-01-03星期二的 22:05 +0000,[email protected]写道:
https://bugzilla.kernel.org/show_bug.cgi?id=216867
--- Comment #1 from Sean Christopherson ([email protected]) ---
Quoted 25 lines · On Fri, Dec 30, 2022, [email protected] wrote:
My code performs the following experiment repeatedly on 3 CPUs:
* Initially, "ptr" at address
0xb8000(VGA memory mapped I/O) is set to 0
* CPU 0 writes0x12345678to ptr, then increases counter "count0".
* In an infinite loop, CPU 1 tries exchanges ptr with register EAX (contains
0)
using the XCHG instruction. If CPU 1 sees0x12345678, it increases counter
"count1".
* CPU 2's behavior is similar to CPU 1, except it increases counter "count2"
when it sees0x12345678.Ideally, after each experiment there should always be count1 + count2 =
count0.
However, in KVM, there may be count1 + count2 > count0. This because CPU 0
writes0x12345678to ptr once, but CPU 1 and CPU 2 both get0x12345678in
XCHG.
Note that XCHG instruction always implements the locking protocol.
Quoted 8 lines
Quoted 4 lines
There is also a deadlock after running the experiment a few times. However I
am
not trying to explain it for now.Is the suspect deadlock in userspace, the guest, or in the host kernel?
The deadlock happens in the guest. It is due to how my experiment is implemented. It is not directly related to KVM.
Quoted 38 lines
Quoted 30 lines
Guessed cause:
I guess that KVM emulates the XCHG instruction that accesses
0xb8000. The
call
stack should be:...
x86_emulate_instruction (arch/x86/kvm/x86.c)x86_emulate_insn(arch/x86/kvm/emulate.c) writeback (arch/x86/kvm/emulate.c)segmented_cmpxchg(arch/x86/kvm/emulate.c)emulator_cmpxchg_emulated(arch/x86/kvm/x86.c, -Quoted 1 line
cmpxchg_emulated)
emulator_try_cmpxchg_user(arch/x86/kvm/x86.c)
...
CMPXCHG instructionSuppose CPU 2 wants to write 0 to ptr using
writeback(), and expecting ptr to
already contain0x13245678. However, CPU 1 changes the content of ptr to 0.
So
* The CMPXCHG instruction fails (clears ZF).
*emulator_try_cmpxchg_userreturns 1.
*emulator_cmpxchg_emulated()returnsX86EMUL_CMPXCHG_FAILED.
*segmented_cmpxchg()returnsX86EMUL_CMPXCHG_FAILED.
*writeback()returnsX86EMUL_CMPXCHG_FAILED.
*x86_emulate_insn()returnsEMULATION_OK.Quoted 7 lines
Thus, I think the root cause of this bug is that
x86_emulate_insn()ignores
theX86EMUL_CMPXCHG_FAILEDerror. The correct behavior should be retrying the
emulation using the updated value (similar to load-linked/store- conditional).
Quoted 13 lines
KVM does retry the emulation, albeit in a very roundabout and non- robust way.
OnX86EMUL_CMPXCHG_FAILED,x86_emulate_insn()skips the EIP update and doesn't
writeback GPRs.x86_emulate_instruction()is flawed and emulates single-step,
but
the "eip" written should be the original RIP, i.e. shouldn't advance past the
instructions being emulated. The single-step mess should be fixed, but I doubt
that's the root cause here.
I see, thanks for the explanation. Now the retrying code looks correct to me (though I agree that the code could have been written in a better way).
Quoted 9 lines
Is there a memslot for 0xb8000? I assume not since KVM is emulating (have you
actually verified that, e.g. with tracepoints?). KVM's ABI doesn't support
atomic MMIO operations, i.e. if there's no memslot, KVM will effectively drop
the LOCK semantics. If that's indeed what's happening, you should see
Quoted 4 lines
kvm: emulating exchange as write
in the host dmesg (just once though).
You are right. I see "kvm: emulating exchange as write" when I run the guest I wrote. Looks like this is the check that causes KVM to drop LOCK on VGA MMIO:
Quoted 5 lines
gpa = kvm_mmu_gva_to_gpa_write(vcpu, addr, NULL);
if (gpa == INVALID_GPA ||
(gpa & PAGE_MASK) == APIC_DEFAULT_PHYS_BASE)
goto emul_write;Closing this bug since LOCK on MMIO is not supported by KVM's ABI.
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 216867] KVM instruction emulation breaks LOCK instruction atomicity when CMPXCHG fails
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=216867
Eric Li ([email protected]) changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |RESOLVED
Resolution|--- |WILL_NOT_FIXSignature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 216867] KVM instruction emulation breaks LOCK instruction atomicity when CMPXCHG fails
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=216867
--- Comment #3 from Eric Li ([email protected]) ---
Just FYI: VMware Workstation Player 16.2.4 has the same behavior, which is reported in
https://communities.vmware.com/t5/VMware-Workstation-Player/LOCK-instruction-atomicity-broken-on-VGA-memory-mapped-IO/m-p/2946505#M39982
I tested on the following hypervisors / emulators, and do not see this bug:
* Virtual Box (version 6.1.40)
* QEMU TCG (version 5.2.0)
* Hyper-V
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.