Patch "gpiolib: acpi: Allow ignoring wake capability on pins that aren't in _AEI" has been added to the 6.1-stable tree
A message that is not in the archive (sent off-list or not yet received): [email protected]
[Public]
Quoted 19 lines
-----Original Message-----
From: Sasha Levin <[email protected]>
Sent: Wednesday, February 1, 2023 10:43
To: [email protected]; Limonciello, Mario <[email protected]>
Cc: Mika Westerberg <[email protected]>; Andy Shevchenko <[email protected]>; Linus Walleij <[email protected]>; Bartosz Golaszewski <[email protected]>
Subject: Patch "gpiolib: acpi: Allow ignoring wake capability on pins that aren't in_AEI" has been added to the 6.1-stable treeThis is a note to let you know that I've just added the patch titled
gpiolib: acpi: Allow ignoring wake capability on pins that aren't in
_AEIto the 6.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-
queue.git;a=summary
Quoted 6 lines
The filename of the patch is:
gpiolib-acpi-allow-ignoring-wake-capability-on-pins-.patch
and it can be found in the queue-6.1 subdirectory.If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.
Hi Sasha,
I suggest you also pick up two other fixes to go with this one.
1) this fix which was in the same series:
4cb786180dfb ("gpiolib: acpi: Add a ignore wakeup quirk for Clevo NL5xRU")
2) This fix which is tangentially related (fixes something from the same original series that exposed the regressions).
d63f11c02b8d ("gpiolib-acpi: Don't set GPIOs for wakeup in S3 mode")
Quoted 51 lines
commit
832a64f6e1557e017da518199dcab0e5fdca2808Author: Mario Limonciello <[email protected]> Date: Mon Jan 16 13:37:01 2023 -0600gpiolib: acpi: Allow ignoring wake capability on pins that aren't in
_AEI[ Upstream commit
0e3b175f079247f0d40d2ab695999c309d3a7498]Using the
ignore_wakequirk or module parameter doesn't work for any
pin
that has been specified in the_CRSinstead of_AEI.Extend the
acpi_gpio_irq_is_wakecheck to cover both places.Suggested-by Raul Rangel <[email protected]>/issues/1722#note_1722335
Signed-off-by Mario Limonciello <[email protected]>Reviewed-by Andy Shevchenko <[email protected]>Signed-off-by Bartosz Golaszewski <[email protected]>Signed-off-by Sasha Levin <[email protected]>drivers/gpio/gpiolib-acpi.c +2
-2@@ -361,7 +361,7 @@ static bool acpi_gpio_in_ignore_list(const char *ignore_list, const char *contro }static bool acpi_gpio_irq_is_wake (struct device *parent, -struct acpi_resource_gpio *agpio) +const struct acpi_resource_gpio *agpio) {unsigned int pin = agpio->pin_table[0 ];@@ -754,7 +754,7 @@ static int acpi_populate_gpio_lookup(struct acpi_resource *ares, void *data) lookup->info.pin_config = agpio->pin_config; lookup->info.debounce = agpio->debounce_timeout; lookup->info.gpioint = gpioint; - lookup->info.wake_capable = agpio->wake_capable ==ACPI_WAKE_CAPABLE ; + lookup->info.wake_capable =acpi_gpio_irq_is_wake (&lookup->info.adev->dev, agpio);drivers/gpio/gpiolib-acpi.c +0
-0/* * Polarity and triggering are only specified for GpioInt
Sasha Levin
maintainerQuoted 30 lines · Mario
[Public]
Quoted 19 lines
-----Original Message-----
From: Sasha Levin <[email protected]>
Sent: Wednesday, February 1, 2023 10:43
To: [email protected]; Limonciello, Mario <[email protected]>
Cc: Mika Westerberg <[email protected]>; Andy Shevchenko <[email protected]>; Linus Walleij <[email protected]>; Bartosz Golaszewski <[email protected]>
Subject: Patch "gpiolib: acpi: Allow ignoring wake capability on pins that aren't in_AEI" has been added to the 6.1-stable treeThis is a note to let you know that I've just added the patch titled
gpiolib: acpi: Allow ignoring wake capability on pins that aren't in
_AEIto the 6.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-
queue.git;a=summaryQuoted 6 lines
The filename of the patch is:
gpiolib-acpi-allow-ignoring-wake-capability-on-pins-.patch
and it can be found in the queue-6.1 subdirectory.If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.
Quoted 7 lines
Hi Sasha,
I suggest you also pick up two other fixes to go with this one.
1) this fix which was in the same series:
4cb786180dfb("gpiolib: acpi: Add a ignore wakeup quirk for Clevo NL5xRU")
This commit has a fixes tag which points to a commit we don't have in the 6.1 tree: 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable"), could you confirm?
Quoted 4 lines
2) This fix which is tangentially related (fixes something from the same original series that exposed the regressions).
d63f11c02b8d("gpiolib-acpi: Don't set GPIOs for wakeup in S3 mode")
Same as above.
Signature · 2 lines
Thanks, Sasha
Quoted 35 lines · Sasha Levin
Quoted 34 lines · Mario
[Public]
Quoted 19 lines
-----Original Message-----
From: Sasha Levin <[email protected]>
Sent: Wednesday, February 1, 2023 10:43
To: [email protected]; Limonciello, Mario <[email protected]>
Cc: Mika Westerberg <[email protected]>; Andy Shevchenko <[email protected]>; Linus Walleij <[email protected]>; Bartosz Golaszewski <[email protected]>
Subject: Patch "gpiolib: acpi: Allow ignoring wake capability on pins that aren't in_AEI" has been added to the 6.1-stable treeThis is a note to let you know that I've just added the patch titled
gpiolib: acpi: Allow ignoring wake capability on pins that aren't in
_AEIto the 6.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-
queue.git;a=summaryQuoted 6 lines
The filename of the patch is:
gpiolib-acpi-allow-ignoring-wake-capability-on-pins-.patch and it can be found in the queue-6.1 subdirectory.If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.
Hi Sasha,
I suggest you also pick up two other fixes to go with this one.
Quoted 7 lines
Quoted 3 lines
1) this fix which was in the same series:
4cb786180dfb("gpiolib: acpi: Add a ignore wakeup quirk for Clevo NL5xRU")This commit has a fixes tag which points to a commit we don't have in the 6.1 tree:
1796f808e4bb("HID: i2c-hid: acpi: Stop settingwakeup_capable"), could you confirm?
Yes; technically it's already problematic in 6.1 but the default policy doesn't set it for enabled. If a user manually set it to enabled the problem happens.
6.2 it happens automatically because policy changed from that commit.
So I think this one makes sense.
Quoted 7 lines
Quoted 5 lines
2) This fix which is tangentially related (fixes something from the same original series that exposed the regressions).
d63f11c02b8d("gpiolib-acpi: Don't set GPIOs for wakeup in S3 mode")Same as above.
This has two fixes tags, one of them is in 6.1. It makes sense to take back to 6.1, the reporters first noticed it in 6.1.
Quoted 51 lines · Mario Limonciello
Quoted 35 lines · Sasha Levin
Quoted 34 lines · Mario
[Public]
Quoted 19 lines
-----Original Message-----
From: Sasha Levin <[email protected]>
Sent: Wednesday, February 1, 2023 10:43
To: [email protected]; Limonciello, Mario <[email protected]>
Cc: Mika Westerberg <[email protected]>; Andy Shevchenko <[email protected]>; Linus Walleij <[email protected]>; Bartosz Golaszewski <[email protected]>
Subject: Patch "gpiolib: acpi: Allow ignoring wake capability on pins that aren't in_AEI" has been added to the 6.1-stable treeThis is a note to let you know that I've just added the patch titled
gpiolib: acpi: Allow ignoring wake capability on pins that aren't in
_AEIto the 6.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-
queue.git;a=summaryQuoted 6 lines
The filename of the patch is:
gpiolib-acpi-allow-ignoring-wake-capability-on-pins-.patch and it can be found in the queue-6.1 subdirectory.If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.
Hi Sasha,
I suggest you also pick up two other fixes to go with this one.
Quoted 7 lines
Quoted 3 lines
1) this fix which was in the same series:
4cb786180dfb("gpiolib: acpi: Add a ignore wakeup quirk for Clevo NL5xRU")This commit has a fixes tag which points to a commit we don't have in the 6.1 tree:
1796f808e4bb("HID: i2c-hid: acpi: Stop settingwakeup_capable"), could you confirm?Yes; technically it's already problematic in 6.1 but the default policy doesn't set it for enabled. If a user manually set it to enabled the problem happens.
6.2 it happens automatically because policy changed from that commit.
So I think this one makes sense.
Quoted 1 line
Quoted 9 lines
Quoted 6 lines
Quoted 4 lines
2) This fix which is tangentially related (fixes something from the same original series that exposed the regressions).
d63f11c02b8d("gpiolib-acpi: Don't set GPIOs for wakeup in S3 mode")Same as above.
This has two fixes tags, one of them is in 6.1. It makes sense to take back to 6.1, the reporters first noticed it in 6.1.
Queued both, thanks!
Signature · 2 lines
Thanks, Sasha